Error with iTunes when connecting for first time.

Here is the error that I get when I connect my phone to my computer:
The software required for iPhone is not installed. Run the iTunes installer to remove iTunes. then install iTunes again.
I have the latest version on iTunes installed (7.3). I have tried removing itunes and reinstalling 4 or 5 times. Evan restarted my computer few times too. I'm running Vista so not sure if that's the problem.

Hi Bigrash,
Close iTunes, and disconnect your iPhone from your computer.
Go to "Control Panel", and go into "Programs".
Select "Installed Programs".
Here, find "Apple Mobile Device Support" from the list, and click on it. From the "File" menu, select "Change/Remove", and then click "Remove".
After that application has been fully uninstalled, go to this page, to download another copy of the iTunesSetup.exe installer:
Download iTunes - 7.3.0.54
After you've downloaded the iTunes installation pack again, launch iTunes, and connect your iPhone.
Do you still get that same error message, or not?
-Kylene

Similar Messages

  • -3095 error and then 5 when connected for first time.

    I Inboxes the AppleTV and I get the -3905 error and when I tried again I get error 5.
    cant seem to connect to my Wifi.
    Thanks in advance!

    Hi LeoCal,
    I apologize, I'm a bit unclear on the exact nature of the issue you are describing, and/or when exactly you are seeing these error messages. If your Apple TV doesn't appear to be working correctly on first setup, you may find the troubleshooting steps outlined in the following article helpful:
    Apple TV: Basic troubleshooting - Apple Support
    Regards,
    - Brenden

  • HT4859 i have setup an ipad without connecting to computer, i am now connecting for first time to itunes it asks if i want to set up as new ipad or restore from previous backup (my iphone not ipad), i have backed ipad up to icloud when i connect back to i

    i have set up my wifes ipad mini wirelesly, i am now connecting for first time to itunes it asks if i want to set up as new ipad or restore from previous backup (my iphone not ipad), i have backed ipad up to icloud when i connect back to itunes will it give me an option to restore from icloud, i dont want to lose the apps and data my wife has already installed through her account... any thoughts

    1. set up as new
    2. transfer you wife's purchases.
    3. Just in case create one computer back up manually.
    Enjoy.

  • Sql query when fired for first time

    Here is my query. I installed database and software using DBCA. Now i got connected to sql. Now my doubt is when I fired SELECT * FROM EMP from scott user, for the first time, what are the different steps followed to fectch the data. I mean how the user gets connected to the database and which background process works at what stages. Please give detailed explanation. Thanks.

    When connecting to the database the client makes a request to the listener, and the listener checks the availability of the requested database service and responds to the client with an ACCEPT message, which indicates connection dispatching.
    After that, the listener sends a RESEND message back to the client and uses this time to check the database service. The client recieves the RESEND message and sends the same request again to the Listener.
    After recieving the ACCEPT message the connection is established, and this connection is different depending if you are using a Dedicated Server or Shared Server configuration.
    When you issue the query:
    SELECT * FROM emp;Oracle checks in the Shared Pool, in the Data Dictionary cache if the object exists and if you have sufficient privileges to access it (user Scott in this case). It then checks the Library cache if this statement has been executed before. If it did, another parse will not be necessary. Then the SQL statement is parsed (if necessary), interpreted and executed.
    The DBRW (Database Writer) background process then checks in the Buffer Cache if the blocks which contain the information from the EMP table are already there. If they are, a physical read is not necessary and it fetches the rows from the Buffer Cache.
    If they are not, DBWR reads the data files, retrieves the data from them, store the related blocks in the Buffer Cache (so in the next executions of this query a physical read will not be needed) and then the data is shown to the user.
    There are other details envolved, but in a general view that is what happens.

  • K7N2G Beeps when booting for first time

    I purshased the K7N2G series motherboard, and after connecting everything when I boot it beeps for about 1 and 1/2 seconds straight then stops, then a few seconds later it does it again.  It does this until I power it off.  A few times I was able to get into the BIOS, where the only things I set were the boot order, disabled the floppy controller, and changed the FSB to 133Mhz.  But nonetheless, it did this before I got into the BIOS the first time.  I have the following items attached to it:
    AMD 2200 w/ fan(which I made sure was working correctly when I booted)
    256MB DDR333 memory(installed in slot 1)
    40GB brand new unpartitioned IBM hard drive
    HP 4x CDRW drive
    Hard drive is set as master and plugged into the middle of the cable, and cdrom is slave at the end both connected to IDE 1.  I realize this isnt the best way to have them hooked up but its only like that for convenience purposes now.  Any help on this would be greatly appreciated
    Thanks.

    hi
    want some more info.
    ram what brand.
    what is the power output on 3.3 5v and 12v rails on the psu?.
    what does the d-bracket show?
    NOTE the d-bracket shows wrong to often but it could be worth checking.
    sometimes it showes a floppy or cpu error when using bad memory.
    bye

  • Ipad 1 does't synch with itunes when connected to power

    when I connect my ipad 1 to charge it does't synch with itunes.
    itunes finds the ipad over wifi but it doesn't synch.

    do you have the option selected on your computer for wifi sync?
    connect your ipad to your computer and go to the summary tab in itunes. select the "Syns this ipad over wifi" option.

  • Slow performance pages when accessing for first time

    Hi Oracle developers,
    Hope this is the right place to ask my question regarding Fusion Applications performance.
    I'm dealing with a hard issue in our Fusion Applications 11.1.7 'test' environment for educational purposes. The thing is that whenever a page is accessed the first time (after a restart) it takes a very long time for the page to appear on the screen.
    When it has been accessed before the page is rendered almost instantly. I suspect this has to with caching/compilation of the pages.
    I already looked at article (Doc ID 1518515.1) and the settings were already set as is described in the solution part of the note.
    My question:
    Is there a fix for this?
    Is there a way to precompile all Fusion Applications JSP pages after a restart.
    Hope you can help me out with this!
    Kind regards,
    Charif

    Hi Charif,
    we are looking into ways to speed this up, but at the moment there is nothing you can do to avoid this delay.  I know this sounds vague, but I cannot discuss future potential features here.
    Thanks,
    Oliver
    Fusion Applications Developer Relations
    @fadevrel
    http://blogs.oracle.com/fadevrel
    http://youtube.com/FADeveloperRelations

  • How do I keep photos on iphone when syncing for first time

    I gave my iPhone 4 to my son as an 8th grade graduation gift.
    He now wants to sync it to his macbook, so I helped him set up an itunes account.
    When we go to sync it, it says it will wipe the phone clean.
    He has some music on there from my itunes acct, and alot of photos he has taken.
    How can he do an initial sync without losing his dat (mostly photos)
    Thanks!

    I am not sure if you can do this if it is your first time on a new iTunes account, but I like to uncheck the box that says something like "Automatically manage your media". This means that iTunes does not care what apps and music etc. that I have on on my phone and if I want to add something I just click and drag a media file onto my phone's name and if I want to delete something I just view files on my phone via iTunes and delete it. I never need to check and uncheck songs in iTunes using this method. Itunes also never has to automatically delete and replace "outdated" media this way. If you can access this checkbox on the Device Summary page when you connect to your phone to iTunes, I highly recommend trying this.

  • IPhone 4s (ios6) don't sync with itunes when connected to PC

    I upgraded my ios version to ios6 (using Wi Fi) and itunes to the latest version.
    iTunes now donot detect my phone when connected to my PC (WIndows7 64 bit) neither charge my iphone using USB cable. The same USB cable when connected to the power socket charges my phone.
    Please assist me if anyone have faced the same problem before

    Anyone? haha.

  • Error while calling web service for first time

    Hello 
    I am calling a third party  web service using BasicHttp adapter and passing user name and password  in send port security tab by setting security mode to "Transport" and Transport client credential type" as Basic.
    every time when i redeploy or after long idle time i am getting below error and then second call works fine.We are using BT 2013.
    I used fiddler and i am not seeing any difference in both requests.Any one ran into this kind of issue?
    An error occurred while processing the message, refer to the details section for more information 
    Message ID: {030802BF-70EC-4CA3-8FB5-B694E7A12136}
    Instance ID: {7E04E1C0-3730-4645-9280-0FE51194CA67}
    Error Description: System.Net.WebException: The remote server returned an unexpected response: (400) Bad Request.
    <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
    <html><head>
    <title>400 Bad Request</title>
    </head><body>
    <h1>Bad Request</h1>
    <p>The request could not be understood by server due to
    malformed syntax.</p>
    </body></html>
    Thanks

    I will not comment on "IIS recycle its workers process
    ". I don't think you have ever said its IIS is the web server used by yourt 3rd paty to host their web service. We (atleast I) don't know wheather your 3rd party's web service is hosted on IIS. It’s some "Web Server"
    could be IIS (if its Microsoft based) or Apache or something else.
    Come back to your question, when the error says "The request could not be
    understood by server due to malformed syntax", when you’re sending the message as expected by 3rd party service, then it has nothing to do with your end, error is returned by your 3rd party. And as you have mentioned you are tracing the
    messages thru Fiddler and you see messages are constructed same and fine as expected by your 3rd party. Don't confuse its nothing on your party, either first deployment or last. Check with your 3rd party
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Error in itunes when connecting ipod

    hi if anyone could help me it would be good.
    when i connect my ipod and it loads itunes it displays an error message saying the file or directory itunes/iprefs is corrupt and unreadable what can i do?

    Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • 6230i wierd error with phone when connecting to bl...

    I have had it working on my old computer, and now when i am trying to get it to work on this new computer, i get this error...
    http://img123.imageshack.us/img123/8444/problem15l​v.jpg
    .....Message Edited by titch2349 on 13-Feb-2006
    06:41 PM

    The new PC Suite will want the older version uninstalled first.
    I suggest doing a backup of your phone contents.
    Then backup your PC (if running XP set up a system restore point).
    Copy the existing PC Suite folder (and contents) into a zip file - you need to stop PC Suite from loading automatically to make sure you can copy all the files.
    Then install the new PC Suite.
    If the PC copies of the images etc are no longer present then copy them back from the zip file.
    But....
    Before you do all that - make sure your PC Bluetooth drivers and firmware are up to date. The 6230i only uses 'Component' key pairing whereas most existing (older) equipment uses 'Unit' key pairing.
    Also the Microsoft XP SP2 Bluetooth is Microsofts version of Bluetooth which is not entirely compatible with everyone elses Bluetooth.
    The latest Belkin Bluetooth firmware and software does work with the 6230i.
    goodluck
    SteveMessage Edited by stevemess on 14-Feb-2006
    10:13 AM
    Tech. Project Manager
    Reuters

  • Issue with new laptop-worked for first time

    I just bought a new ASUS laptop and followed the instructions from online about transferring my itunes library to the new laptop. I have 10.1.6 version on both computers. When I went to authorize this computer on my new laptop and signed in, I did see my library name under "shared" and all the songs were there. I then went on the old computer under File/Library/Export Library (so I could add my playlists to the laptop) and on the laptop did File/Library/Import Playlists. When I did that, most of my songs disappeared under my libary (shared). Initially before I exported/imported the libary, I had all 2395 songs on both computers. After exporting the playlists, I only have 59 songs on my new laptop. I completely unistalled itunes on the laptop and rebooted. Then I downloaded itunes on the laptop again and did the home sharing and authorize this computer but now I do not see a shared library at all on my laptop. I do not know what to do. Can someone please help me? Thank you very much.

    Hi,
    As HP Probook 450 G2 is a business notebook you'll be able to get better solutions specific  your model if you contact the business forum.
    Here is the link. 
    HP Enterprise Business Community
    Hope it helps..
    Note:
    If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

  • IPad is not detected by iTunes when connected to desktop

    When I connect the iPad to the Windows desktop, the iTunes app usually opens up automatically.  It does however not connect with iTunes when connected any more.
    When I connect the iPad to the desktop, I am able to access the pictures though windows explorer but iTunes still does not detect the iPad?
    I have swithced the iPad off and on again.
    Any suggestions?

    Hello JJJJNNNNN,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Have a nice day,
    Mario

  • HT201250 i am using for first time the time machine and an external hard drive because I want to erase my macbook and start from zero files. do i keep my files in the portable hard disk when I connect it again with the macbook or the time machine will era

    i am using for first time the time machine and an external hard drive because I want to erase my macbook and start from zero files. Am i keeping my files in the portable hard disk when I will connect it again with the macbook or the time machine will erase all?
    I would like to know if after I erase all my data, empy hard drive inside the macbook, the time machine will erase all my files that I have saved in my "WD "My passport" external hard drive

    Welcome to Apple Support Communities
    Time Machine has to erase the external disk in order to make backups. Before setting Time Machine up, copy the files of your external disk to the hard disk of the Mac in order not to lose them, and then, set up Time Machine. The first backup will start automatically.
    If you want more information about Time Machine, read the Pondini's site > http://pondini.org

Maybe you are looking for