Error with JPR(Java Proxy Runtime) in Adapter Monitor of RWB

Dear Experts,
             I am implementing scenario with Client Java Proxy(Outbound) and Server ABAP Proxy(Inbound). We have done all the designing in IR and configurations in ID. We have deployed the EAR successfully. But when we go to RWB(Runtime Work Bench) to monitor the inital status of JPR in RWB->Adapter Monitor. It shows the following error.
Status     Name                                Text
Error        SLD Access                     SLD host:port = yhsapi01.yashsap.com:50000
Error getting JPR configuration from SLD. Exception: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=yhsapi01 SYSNR=00 GWHOST=yhsapi01 GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR max no of 100 conversations exceeded
TIME Wed Jun 03 19:42:45 200
RELEASE 700
COMPONENT CPIC (TCP/IP) with Unicode
VERSION 3
RC 466
MODULE r3cpic.c
LINE 10713
COUNTER 5521
No access to get JPR configuration

Hi!
Obviously there are more than 100 connections opened in your system.
ERROR max no of 100 conversations exceeded
Please check your gateway settings (in ABAP you can check the parameters using transaction SMGW).
Regards,
Volker

Similar Messages

  • Error with receiver java proxy

    for a XI type communication channel for receiver Java proxy I see following error in SXMB_MONI.
    <i>Unable to read user password from communication channel of type Error when accessing the secure store (access ID = 3650CAFA1FBAA04E8F260C6C4C1923FA) Error while reading from the secure store: ERROR_UNKNOWN: Cannot find entry in secure store (SECSTORE,023).</i>
    I have specified the correct credentials for the non sap system in authentication data i.e. XIAPPLUSER and its password.
    Any pointers?

    Hi Amol
    Did you solved this problem? I am also getting the same error when calling receiver java proxy with Adapter type XI.
    If you have solved the problem pl let me know.
    Regards
    Prahllad

  • Where do i find JPR (Java Proxy Runtime)in RWB?

    Hi
    What is this SAP Note 809420. Where can i find that?
    Help me
    Thanks

    http://service.sap.com/notes
    you need marketplace id to view the notes.
    <b>Mark helpful answers!!!</b>

  • Java Proxy Runtime:  failure to locate proxy bean on inbound call

    Hello gurus of the SDN,
    I have been trying to get an inbound Java Proxy scenario to work in XI 3.0 but have not been able to get the JPR to recognize my generated and deployed java code.  My scenario is set up to call the java proxies generated from a message interface based on the MATMAS Idoc.  I successfully deployed the generated java proxies on the same host box as is running the XI instance.  The objects are named as follows
    Message interface on XI = Inbound_MATMAS04
    Generated proxy bean = Inbound_MATMAS04_PortTypeBean
    Implementing class = InboundMATMAS04_PortTypeImpl
    Implementing method = inboundMATMAS04
    I used the JPR transport servlet to register the interface and implementing class but am not sure if I did this correctly.  I used the following entry in my web browser:
    http://nadcp786:50000/ProxyServer/register?
    ns=urn:xiTrainingLabs:groupXX:SAP&
    interface=InboundMATMAS04&
    bean=InboundMATMAS04_PortTypeImpl&
    method=inboundMATMAS04
    I also tried using the localejb/ prefix for the bean name in the above step since the code is co-located.  When I trigger the scenario, the Idoc info is passed into XI and the Java Proxy Runtime is called, but I get the following error response back in the SOAP header:
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapterFramework</SAP:Category>
      <SAP:Code area="PARSING">GENERAL</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Cannot locate proxy bean InboundMATMAS04_PortTypeImpl: com.sap.aii.proxy.xiruntime.core.XmlInboundException: Cannot locate proxy bean InboundMATMAS04_PortTypeImpl</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Finally, appended at the end of this post is the audit log of the messaging system showing that the JPR is called but without being able to locate the bean.  I think I am missing a configuration step somewhere, but can’t figure out what it is!!  Can anyone help me? 
    Many thanks in advance.
    Regards,
    Nick Simon
    Time Stamp     Status     Description
    2004-10-25 19:47:32     Success     The message was successfully received by the messaging system. Profile: XI URL: http://nadcp786.bcsdc.lexington.ibm.com:50000/MessagingSystem/receive/JPR/XI
    2004-10-25 19:47:32     Success     Using connection JPR. Trying to put the message into the receive queue.
    2004-10-25 19:47:32     Success     The message was successfully retrieved from the receive queue.
    2004-10-25 19:47:32     Success     The message status set to DLNG.
    2004-10-25 19:47:32     Success     Java proxy runtime (JPR) accepted the message
    2004-10-25 19:47:34     Error     JPR could not process the message. Reason: Cannot locate proxy bean localejbs/InboundMATMAS04_PortTypeImpl
    2004-10-25 19:47:34     Error     Delivery of the message to the application using connection JPR failed, due to: Cannot locate proxy bean localejbs/InboundMATMAS04_PortTypeImpl.
    2004-10-25 19:47:34     Error     The message status set to FAIL.
    2004-10-25 19:47:34     Error     Asynchronous error detected: Cannot locate proxy bean localejbs/InboundMATMAS04_PortTypeImpl. Trying to report it.
    2004-10-25 19:47:34     Error     Asynchronous error reported.
    Message was edited by: Nicholas Simon

    Hi
    How do you determine the JNDI naming of the a EJB?
    I have following entry in JNDI directory in the root
    Object Name FlightQueryIn
    Class Name javax.naming.Reference
    Context Name 
    Object Value Reference Class Name:
    Type: clientAppName
    Content: sap.com/JavaProxyEAR
    Type: interfaceType
    Content: remote
    Type: home
    Content: com.sap.aii.proxy.xiruntime.core.AbstractProxyInboundHome4
    Type: ejb-link
    Content: FlightSeatAvailabilityQueryIn_PortTypeBean
    Type: jndi-name
    Content: FlightQueryIn
    Type: remote
    Content: com.sap.aii.proxy.xiruntime.core.AbstractProxyInboundRemote4
    I tried to register the bean with JPR using:
    http://ctsapxid01:50100/ProxyServer/register?ns=http://sap.com/xi/XI/Demo/Airline&interface=FlightSeatAvailabilityQuery_In&bean=FlightQueryIn&method=flightSeatAvailabilityQueryIn
    I followed the following blog
    http://wiki.sdn.sap.com/wiki/display/Java/JavaProxyChangesinPI7.1fromPI7.0
    Thanks,
    Chris

  • PCK and Java Proxy Runtime

    Hello,
    I am a newbie to XI world and have some questions regarding PCK and Java Proxy Runtime. Is it possible to send the message from PCK by using Java Proxy Runtime as Sender?
    If yes what exactly configuration steps have to be done on PCK side like SLD & ExchangeProfile configuration according to Configuration Guide or XI Receiver Adapter with Receiver agreement creation?
    Thanks in advance,
    Viktar

    Hi Stefan,
    Thanks for information. We successfully checked a simple test scenarion JPR -> PCK -> File. It was necessary to configure properly XI Sender and File Receiver adapters on PCK.
    SLD and Exchange Profile were not required to be configurable but in this case we have to use MessageSpecifier interface in client proxy for sender and receiver determinations.
    Regards,
    Viktar

  • Error invoking client Java Proxy

    I have a scenario with Client Java Proxy in which a JSP gives call to the EJBs generated from the Message interface. Everything is deployed correctly and when I try to invoke the JSP, following error is reported in the defaultTrace file of J2EE engine.
    com.sap.aii.proxy.xiruntime.core.XmlLandscapeAccess.getJPRConfigurationFromSLD()
    Error getting JPR configuration from SLD. Exception: entityNotFound#
    I found pointers to SAP Note # 809420 as a result of SDN search.
    Has anybody faced similar situation?
    Regards,
    Amol

    Stefan,
    Things worked after the business system was created in SLD.
    I dont see the radio buttons for rewarding points against your post. Will try later to reward points.
    Thanks for your help.
    Regards,
    Amol

  • Give me description about JAVA Proxy Runtime and JAVA Proxy Server

    Give me description about JAVA Proxy Runtime and JAVA Proxy Server with some examples.

    Hi,
    Java proxy runtime :
    Using the Java proxy runtime you can receive messages or send messages to the Integration Server.
    This will help you
    http://help.sap.com/saphelp_nw04/helpdata/en/64/7e5e3c754e476ee10000000a11405a/frameset.htm
    Java proxy server :
    The connection to the Integration Server by using the Java proxy runtime.
    This will help you
    http://help.sap.com/saphelp_nw04/helpdata/en/87/5305adc23540b8ac7bce08dbe96bd5/frameset.htm
    Regards
    Agasthuri Doss

  • Java Proxy Runtime Error - A remote host refused an attempted connection

    I am able to register my Java server proxy with no errors. However when I message is sent through I get the following error in Xi Adapter:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapterFramework</SAP:Category>
      <SAP:Code area="MESSAGE">GENERAL</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Error invoking method someJavaProxyCallIB of proxy bean com.sap.aii.proxy.xiruntime.core.AbstractProxyInboundLocal4LocalObjectImpl0_0: A remote host refused an attempted connect operation.: com.sap.aii.proxy.xiruntime.core.XmlInboundException: Error invoking method someJavaProxyCallIB of proxy bean com.sap.aii.proxy.xiruntime.core.AbstractProxyInboundLocal4LocalObjectImpl0_0: A remote host refused an attempted connect operation.</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Doea anyone know why this is happening?

    I guess, that you have Java proxy libraries in the EAR file. Remove them before deploying.
    Regards
    Stefan

  • Error while running java proxy in PI 7.1

    Hi All,
    I had created a java proxy using nwds 7.1. This java proxy is called by XI channel and its synchronous.
    WHen i run my scenario in PI i am getting a error "Error while sending message: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing inbound message. Exception: No remote bean found for reference of class $Proxy2919
    Kindly help me finding what can be the issue.
    Regards,
    Rajesh

    Go to the JNDI Browser (Nwa -> Problem Management), and check if the proxy was deployed correctly with the exact name "Proxy2919".
    Also, check the OSS note below.
    #1292633 - JPR: Throwing "No remote bean found for reference of class"

  • Alerts for Java Proxy Runtime

    Hi Gurus!!
    I have a problem with a Asynchronous Java Proxy Server.
    When a message is sent from Integration Engine to the Java Proxy, in the SXMB_MONI the status is ok, but if there is a problem on the Java Proxy, I can only see on the Messaging Tool 'http://myserver:myport/MessagingSystem'.
    Is there any alert to inform of problems of excution of Java Proxies?
    Thanks and regards,
    Manuel Míguez.

    If you can see the error in the Adapter engine monitoring, you can create rule in RWB and get an alert mail. If the error is occuring beyond XI AE, you can not trigger an alert.
    VJ

  • Problem with Server Java Proxy

    I have got an error: Delivery of the message to the application using connection JPR failed, due to: RecoverableException.
    Could you help me what is wrong with JPR?
    RWB monitoring doesn't show errors
    defaultTrace.trc - no errors
    Messafing System monitor
    Error Category:  XI_J2EE_MESSAGING_SYSTEM 
    Error Code:  INBOUND_DELIVERY_ERROR 
    I have deployed Java proxy on the same server (as XI)

    Hi Sergey,
    These may help you..
    User exit  or Badi for VL31N (create inbound delivery)
    Idoc WHSORD for inbound delivery
    cheers,
    Prashanth

  • CLIENT_RECEIVE_FAILED Error in Client Java Proxy

    Hi. All..
    Do you experience CLIENT_RECEIVE_FAILED Error ?
    This pattern is java proxy -> xi -> abap proxy.
    It's occurring in xi server ( QAS ) . ( I guess that is internal error. )
    I did refresh CPACache. but I don't solve.
    This interface is very good execution in DEV.
    but has occured CLIENT_RECEIVE_FAILED Error in QAS.
    What's wrong?
    Error message following....
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
      <SAP:P1>110</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Fehler beim Empfangen per HTTP (Fehlercode: 110, Fehlertext: )</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>

    U may do the following
    1. Check in SMICM if your HTTP service is running.
    2. Upgrade the ICM kernel patch.
    3. For SP15 there is a list of corrections -have a look into this SAP note-897583
    Regards,
    Prateek

  • Error when deploy Java Proxy Server EAR to PI

    We are trying to deploy our Java Proxy Server EAR to PI using Visual Administrator. However, it gives the following error:
    Deploy of the ear has errors :
    java.rmi.RemoteException: Cannot deploy application sap.com/TestBatch
    Reason: Errors while compiling:
    .... .java:91 illegal escape character
    if (method.equals("U0024descriptor")) { ....
    We have tried to deploy the same EAR to another PI system and it works fine. As a result, we think we might have missed something when installing or configuring this PI but don't have a clue where to start. We have also tried deploying using SDM but also didn't succeed.

    Hi Pikad !
    I understand that it the very same EAR deployed with no hassle in another PI, here it should work ok, but I think you should check the backslash you are using. If you need to use the backslash character, you must use ("
    U0024descriptor") or change the U to \u0024 for the dollar sign.
    Check:
    Regards,
    Matias.

  • Internal Error 2502 - JRE (Java SE Runtime 5.02u22) ...please help!

    Hi Everyone,
    I am setting up an account to submit documents to the FDA through an electronic submission gateway. It's been one thing after the other. I finally made progress on the checklist. The next requirement is to download JRE and JCE. Anytime I try to install the (JRE) Java SE Runtime Environment 5.0u22" on my Window 7 PC an error message appears- "Internal Error 2502". I tried rebooting and reinstalling and nothing changes. I called Oracle and they advised me to post this thread.
    I would be so appreciative if someone could offer me some advice on how to properly install this.
    Huge Thanks,
    Aileen

    Oracle gave you the wrong advice. This is a Java Programming forum, not a help desk. They should not shirk their own support responsibilities. Locking this thread.

  • PI7.11 Can I use Java proxy on  Advanced Adapter Engine ??

    To:PI Specialists
    Now I m planning to use Java Proxy on PI7.11.
    and I want to know Java Proxy can act on AAE as local processing.
    I wonder that Java Proxy do not connect  to adapter engine but  to integration engine.
    If it connect to integration engine I ll not to use Java Proxy on AAE...
    Please teach me about Java proxy will do on AAE....
    Naoki Kurihara

    Now I find out we can't use Java Proxy on AAE....
    Please check this pdf page 12.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70066f78-7794-2c10-2e8c-cb967cef407b?quicklink=index&overridelayout=true

Maybe you are looking for