Error with Maintenance Optimizer in Solution Manager 4.0

Hi, I am configuring Solution Manager for download SP, I check marketplace and download the guide, when I try to download a SP following message show me:
"Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM)."
I go to sm59, verify RFC SAP-OSS with correct data, I found at guide following Host :
/H/54.16.44.50/S/sapdp99/H/54.62.200.35/S/
When I try press Connection Test Buttom I can not connect to SAP.
Do you know which can be my error? .....
Regards.

Hi,
Following the note 1024932
Steps to do before configre the maintance optimizer you need to configure sattilite systems in solution manager.
go to SMSY and configre R\3 systems.For these systems you need to create RFC connections and Logical comp.
http://service.sap.com/rkt-solman
for tutors and PDFs how to set up MOPZ.
Points if it helpfull
Regards
Neni

Similar Messages

  • How to configuration Maintenance Optimizer in Solution Manager 4.0?

    Hi All,
    Can any tell me How to configuration Maintenance Optimizer in Solution Manager 4.0?
    If any one having the document for same then please give me.
    My mail id is : - <email address removed by moderator>
    Thanks a lot,
    Harshal

    Hello Harshal,
    Please go to service.sap.com/solutionmanager, click on the "maintenance optimizer" link, then a step-by-step guide is available there.
    Another document is attached in Note 990534.
    If you have further issues, Note 1024932 might be a good starting point.
    Best regards,
    Victor

  • Error with CTC users at Solution Manager 7.1

    Error during Inital Setup at Solution Manager 7.1
    hello SAP Experts,
    I have an error during the Initial setup Solution manager 7.1 SPS3.
    I get it at SAP Solution Manager Configuration: System Preparation step 6.1 'Select SLD'.
    I filled host, port and password, status of SLD server is green, then I clicked button 'Configure SLD Data Supplier...' I have get new window, to fill in passwords and options.
    [SLD users|http://pokazywarka.pl/63hxan/] [SM2CTC & CTC2SM users|http://pokazywarka.pl/mcpakj/] (I logged into the system as a user SOLMAN_ADMIN, SLDDSUSER and SLDAPIUSER).
    After I click button 'next' an error occurred:
    Error: Execution of Function AGS_SISE_SET_CTC_STATUS ends with an error (message ID: 341, message number: No RFC authorization for function module AGS_SISE_SET_CTC_STATUS.:RFC_NO_AUTHORITY, message text: ).
    I have performed tx.Solman_setup as SOLMAN_ADMIN user.
    All steps before the an error are finished sucessfully.
    I  looking for information at Google and SAP notes but can not find anything.
    Please send any advices,
    Best regards
    SAPFan

    Hello,
    Please check my last reply to this very same issue in message:
    RFC No Authority error
    Best regards,
    Guilherme

  • Maintenance Optimizer in Solution Manager 3.2

    We are experiencing the sheer joy that Solution Manager is, while trying to configure the Maintenance Optimizer.
    From the document MOPZ_Component32_vers4.pdf document that is for SP15 for SolMan 3.2, we are confused by this section on Page 6.
    "Your system administrator must have performed the following Customizing activities:
    &#56256;&#56440; Maintain User for Communication with SAP Service and Support
    &#56256;&#56440; Assign S-User for SAP Support Portal functionality or with the transaction AISUSER
    Your S-User must be assigned to the same customer or corporate number as
    the S-User which your administrator entered in the SAP-OSS RFC destination."
    We just don't understand the last sentence.  You enter an S-User in the SAP-OSS RFC destination in sm59??  Where??
    Currently in AISUER I have an entry, with my SAP User ID (eg. FRED) and my S-User ID in the 'Contact Person' column (e.g. 123456, my S000123456, shortened).
    We can access the Maintenance Optimizer, but packages are not visible there.  No error is reported.  I have the necessary Roles.  Are these the correct values?
    Our SAPOSS Rfc is functioning, as user OSS_RFC. What the document is trying to say about the relationship between this RFC and a service marketplace S-User is unclear.
    Any assistance appreciated.  Remember, SM 3.2!

    Hi,
    You can download this to desktop or you  can transfer same to server(/usr/sap/trans/EPS/in/)
    You have to uncar using SAPCAR.
    Also you can directly upload from front-end using spam/saint as well.
    Then apply the same using spam/saint.
    Let us know if you need any clarification.
    Regards

  • Upgrade button missing in maintenance optimizer of Solution manager

    Hi,
    We are going to perform upgrade R/3 4.7*110 Non uniocde to ERP 6.0 EHP non unicode.
    We used SAP EHP 1 for SAP Solution Manager 7.0 and support packake for SAP EHP 1 for SAP Solution Manager 7.0 is 24.
    Applied following OSS notes  pertaining to MOPZ  :
    0001450757
    0001461849
    0001485385
    0001548530
    0001590226
    COnfigured using tx code SMSY - Product System is SAP ERP and product version is SAP ERP 2004.
    Created logical components and assigned to <SID> of R/3 4.7 Development system.
    Then created solution and configured solution landscape  . Logical component was assigned to solution landscape.
    Then clicked on "Create new Optimizer transaction"
    Then select product version : ERP 2004
    Then select Product system  and selected <SID>.
    But  only "maintenance" button was displayed.
    However "Upgrade with enhancement package" button is not showing.
    Please help us the solution.
    Thanks
    ap

    A Prasad Rao wrote:
    Hi Sunny
    > For R/3 4.7*110 product name is ERP and product version is ERP 2004
    >
    >  I want upgrade button or upgrade with Enhancement package button should appear
    >
    > It seems we need to apply some OSS notes but coul not find anything becasue SP stack  for solman installed was 24.
    >
    > Please help
    > Thanks and Regards
    > APR
    As I said earlier, you need to register it as ERP 6.0 only to get Enhancement Package installation button. There is no other option for it. If you want to confirm then check How to install EHP4 guide on http://service.sap.com/erp-ehp.
    Thanks
    Sunny

  • AISUSER not assigned - Giving error during Maintenance Optimizer

    Hi Tech Masters,
    I am trying to set up Maintenance Optimizer on Solution Manager 7.0 SP15 ( WIndows 2003).
    I am using wizard to do this. But I am getting error when I am trying to update "Assign S-User for SAP Support Portal functionality" ( Basically the AISUSER Tcode does ) :
    When I am entering new entries, Its allowing me to enter User , SAP Customer No, but whenver I am trying to input Contact Person Its giving me the following error :
    "Partner number 0000000000 was not found in table AICONTACTS."
    Please help me out.
    Thanks
    Rabi Pal

    Are you sure that you are entering the correct Customer Number and the corresponding S-userid is correct ?
    May be this problem is related with several customer number administration ? check these notes
    Note 1151450 - FAQ: Managing several customer numbers - Support Package 15
    Note 1082010 - Administration of several customer numbers

  • Error - Update Product Data in Solution Manager

    Hello,
    We are currently downloading the Enhancement Package 4 in SOLMAN via Maintenance Optimizer, however, after choosing the Technical Usages in step 2.1, it shows an error in step 2.2 (Select OS/DB Dependent Files):
    Error : Update Product Data in Solution Manager
    Has anyone encountered the same problem? Would it be fine to continue on the next step after selecting the files which you need for your operating system-database combination.
    Any information is highly appreciated. Thank you.

    Hi Jaypee,
    Check guide How-To Install EHP4- A practical guide. Solution of this problem is documented there. you can download it from http://service.sap.com/erp-ehp
    Extract from this guide for this problem:
    Make sure that you update the product data in SAP Solution Manager. This is described in SAP Note 1277035 which is referenced from the collective SAP Note 1122966. If you do not update the product data, you might get an error message after the stack calculation. The message text explains the problem in more detail.
    Thanks
    Sunny

  • What are the tasks we can do with Maintenance Optimizer

    What are the tasks we can do with Maintenance Optimizer?

    Hi,
    All Corrective Packages for SAP NW04 , NW04s and SAP Business suite delivered after 04/02/2007 will only be available via SAP Solution Manager MOPZ
    Also it Reduces risk, Increase transparency and Prepared for Future.
    Thanks
    Vijay Kothapalli

  • Error in RFC SM_DM1CLNT800_BACK to Solution Manager System Message no. STMWFLOW025

    Hi,
    I am facing an issue in our Test landscape. One of our team member uninstalled solman system which was connected to all other system. CHarms was partly configured in it, so other technical team used to reach to solman for creating TR# and also release the TR from Solman. Now that the system was removed abruptly we are facing this issue and I have checked few things as below:
    1) Checked for domain link entries in STMS and TP profile file, could not find anything. Nor there is any option to delete domain link as there is for create
    2) Checked the RFC its was working as new Solman with the same host name and other details has been brought back with out any settings yet in it.
    3) I deleted the RFC SM_DM1CLNT800_BACK in the managed system and had a backup copy created before deleting it. But still get the error "Error in RFC SM_DM1CLNT800_BACK to Solution Manager System" in more help I see this Message no. STMWFLOW025
    4) Message no. STMWFLOW025 - It gives me an indication that this is something to do with the domain link and the Workflow of the TMS.
    5) Checked BCOS_CUST table and it has an entry for this RFC. - Should I be removing this entry and will this resolve the issue?
    I need help in resolving this issue and also if one of you could share a blog for the proper configuration removal process of a managed system from Charms and ITSM I think it would be very helpful. I could only find process and step towards configuration and not how to unconfigure the system.
    Thanks in advance
    Ashish

    Hi
    The issue is now resolved, this is how I did it.
    1) Removed entries from BCOS_CUST from client 000 for OSS_MSG which was pointing to the RFC name
    Then got another error:
    No RFC connection to the central lock information management system.
    The project lock functionality is active in the local system, but there is no RFC connection to the Solution Manager system.
    2a) Ran the report in SA38 TMW_CONTROL_PROJECT_LOCK with selection for Deactivate the "project lock functionality".
    2) Filled the "Deactivate Project Lock" field with "X" then clicked EXECUTE.
    Problem got Solved.
    Thanks
    Ashish

  • How to configure maintanace optimizer in solution manager

    Hi,
    How to configure maintanace optimizer in solution manager.
    Regards,
    Asif

    Hi,
    Check this link... it has complete step by step configuration of Maintenance Optimizer...
    https://websmp105.sap-ag.de/~sapidb/011000358700000235502007E
    http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/90454eea-3564-2a10-d0b9-c84d468365ab
    http://help.sap.com/saphelp_smehp1/helpdata/en/46/418970cdb45fabe10000000a1553f7/frameset.htm
    https://websmp210.sap-ag.de/~sapidb/011000358700000086852008E.sim
    https://websmp210.sap-ag.de/~sapidb/011000358700000086862008E.sim
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID1787522650DB00553277662805589317End?blog=/pub/wlg/8217
    Also, http://service.sap.com/rkt-Solman --> Technology Consultant & System Administrator -> Technical configuration ->configuaration of Basic settings in solman, Mopz simple usage and normal usage
    Thnx,
    Waseem.

  • Problem with Maintenance Optimizer after first step

    Hi all,
    I have problem with Maintenance Optimizer after I choose system and save transaction, I click on Continue button, but nothing happens....
    Any ideas?
    Regards,
    Lazar Hristov

    I resolved my problem.
    I activate from spro -> Initial Configuration II, then activate BC Set for mopz and now everything works fine.
    Regards,
    Lazar Hristov

  • HP QTP 11 with intergration to SAP Solution Manager version 7.1

    Hi All
    I am using HP QTP 11 with intergration to SAP Solution Manager version 7.1 and been stumped on this for about two days and unable to find refrence to this anywhere.
    When I record a test Script and set the parameters the Test/action Parameter option does not display. the only option I have is adding the parameter to the data table.
     Test/Action Parameters Selection not displayed
     me. 

    Hi,
    re-check if the 7.4 system is correctly registered in the solman SLD system.
    Re-check LMDB definition for your 7.4 as JAVA system. you have to manually created the Product system. Ensure all the Component and definitions are correct.
    Also do a verrification run within the LMDB. This will confirm whether all the information is correctly defined.
    Please note - SLD -> LMDB -> SMSY.
    So, if the first 2 don't have the correct information, you wont have much joy with smsy.
    Rgds
    Deepak

  • Error in maintenance optimizer generating Stack File XML

    Hi all,
    In step 3 "Download Files" of maintenance optimizer transaction to implement the EHP5 of ERP, In the tab "Log" I see the following error.
    *Collecting XML adjustment input data done with error or warning.
    Message no.AGS_MOPZ_PLAN_MSG144*
    The stack XML file is very very important to the ehpi installer, then I need to know which implications have the error below...
    I create 3 Maintenance Optimizer transactions, and in all of them, the error appears.
    Thanks  a lot.

    Hello,
    Please check if the SPAM level of the Solution Manager is the latest.
    If this does not help, please check the details about the error message in transaction SLG1 (this transaction is the full application log). There should be extra text / error message explaining the situation, you only have to look for the error around the time when you got the 'Collecting XML adjustment input data done with error or warning' message.
    Best regards,
    Miguel Ariñ

  • Error in Maintenance Optimizer in step "Select files for component "

    Hi everybody,
    i would like to download patches for my system. I have defined a solution and now i will start the Maintenance Optimizer procedure to download, but when i press a button "Select Files..." an error "the page cannot be displayed" occurred.
    Does anybody know what should i check in my configuration? Where can I find more details for error?
    Regards
    Bogdan

    Hi,
    Here is the whole solution for you.
    Hope you have implemented the note 990534 properly.
    This is what I have done to resolve the same issue -
    Apply patch ST-ICO 8 and 9
    generate BC set SOLMAN40_MOPZ_TTYP_SLMO_000
    generate BC set SOLMAN40_CHARM_PROXYFACT_001
    If the error still persist, you will need to work on the below notes. (997780)
    Goto SPRO - IMG>SAP SOL MGR>SCENARIO SPECIFIC>CHANGE REQ MGMNT>EXTNDED CONFIG>CHANGE TXN>CONSISTENCY CHECK IN CHANGE REQ MGMNT (define basic settings – SOCM_CHECK_002)
    Deselect the 'Integr' field (integration with change management is required) for the checks listed below. The system issues a message stating that changes are not allowed and that the entries are SAP property. This is only a warning message. Choose ENTER to ignore the message and save your changes.
    Checks:
               IB_SYST_CHK
               S_USER_CHECK
               REQUEST_IN_PROCESS
               SOLUTION_ASSIGNMENT
               PRODUCT_ASSIGNMENT
               S_USER_CHECK
               EMPTY_CONTAINER
               SYSTEM_STATUS_OK
    If you are getting the error "no active ibase" after this, try to implement 1030498.
    Hope this helps. If this corrects your issue, please mark the question as answered and award points.
    Thanks,
    Mehfil Meherali

  • Problem with Maintenance Optimizer - Solman EHP1

    Hi All,
    I have a solution manager 7.0 ehp1 system and maintenance optimizer does not work at all.
    Initial configurarion and Basic configuration has been done - Tcode : Solman_Setup
    A solution has been created and systems have been assigned to it, however when i launch create new maintenance
    transaction it shows us the solution and the systems assigned under it.If i select our Production system and click on next
    it comes up an error, saying the table does not contain any data. Do i need to do the SLM configuration for MOPZ to work?
    Has anyone seen  this error earlier. Any inputs would be of great help.
    Regards,
    Ershad Ahmed.

    Hi,
    Though the error does not give much insight. There are some warnings which tells that configuration has to be done
    Please find the warnings attached in  the email.
    Not able to find an active SLM for selected managed systems
    No configured SLM
    No common SLM system is regsitered for Managed Systems
    The system / systems - SID have not beed registered in SLM
    Instance -type missing in SMSY for an application server instance of system .
    Regards,
    Ershad Ahmed

Maybe you are looking for