Error with message server or lgtst?

Hi,
I`m new in this, so I need your help please with SAP, we have a problem, this happened the last 2 mondays, we have the SAP R3 v4.7.c with SGeSAP B04.01 in a cluster on a HP-UX 11i V2, in a package is running the database and the central instance and in another 2 hosts is running the applications, all conected by nfs. The problem: in a moment the SAP Message Server Monitor detect
WARNING: Message server 'server1' on node 'node1' - monitor state:YELLOW,1
(msmon_monitor): lgtst:
ERROR timeout occured
TIME Mon Feb 5 16:37:48 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -5
COUNTER 1
using trcfile: /dev/null
Feb 5 16:37:49 - Node "node1": (msmon_monitor): msprot: returncode=0
Feb 5 16:37:49 - Node "node1": (msmon_monitor): ERROR: Message server process not running
Node "node1": Halting package at Mon Feb 5 16:37:49 SAT 2007 ###########
Feb 5 16:37:49 - Node "node1": Halting service dbciPE1db
Feb 5 16:37:50 - Node "node1": Halting service dbciPE1ms
cmhaltserv : Service name dbciPE1ms is not running.
and the service start to going down...
This appears in the package log, but the problem is not on the net or in the nfs server, some people tell us that might be a parameter in the sapms.mon, the MSMON_RFC_TIMEOUT..but we don't be sure..it seems that the message server lost conection with something but I don't know how works the Message Server, is strange that this happen only one day in the week so I think that there is another variable that produce this error..
any idea??? Can I see another file? or log? I don't know what can we do..
Thanks a lot!
Regards, Caro.

hi
Since you are indeed working with the depreciation area for 'special reserve', the arithmatic for this derived depreciation area would be ideally tax depreciation area - book depreciation area.
kindly confirm if this the arithmatic used for your depreciation area 03.
if this is not the case please let me know the arithmatic used for the derived depreciation area 03.
thanks

Similar Messages

J2ee connection error, "The Message Server did not respond within 60 sec"

Hi,
I am facing the error "The Message Server did not respond within 60 sec. Please check if the message server is running.." when connecting to J2ee through NWDS.
I am able to reach the index page via http://<ip address>:53500/index.html but yet unable to reach through NWDS.
I have tried various combinations of host and port names like:
Message Server Host : <ip address>, <host name>
Message Server Port : 3636, 3936
but still no luck.
I've also cross checked the value of message server port by navigating to http://<IP address>:53500/monitoring/SystemInfo too, it is 3636.
The telnet test (telnet <ip address> <port Number>) draws a blank window.
I know this problem has been posted again and again, but then I am unable to understand what is the solution to this.
Can someone please help me in resolving this issue?
Note: [link 1|Unable to Connect to the J2EE Server from Netweaver Developer Studio; & [link 2|Developer Studio:Exception:The message server did not respond within 60 sec; are already checked.

Hi Robin,
Although I still haven't received any info from my colleagues regarding the central instance..
Just a quick query, if we have NW04 we use 36** and if it is NW04S then we use 39** , is this the only difference for message server port?
If that is the case, as I mentioned earlier, I have tried both, and one gave me N/A(3936) while the other gave me 'message server did not respond' error(3636).
I have the message server host name & port , Enqueue Server Host name & Port and SDM PID and Port details with me..
Can this be anyway useful in establishing a connection?
Waiting for your inputs...
Best Regards,
Vinay

HT4436 my massage alway give error with the server try again later help

someone know how strigh forward reset massage and fix error with the server????
help

See http://support.apple.com/kb/TS3970?viewlocale=en_US&locale=en_US - maybe it can help solve your problem.
Clinton

Help! Broadcasting error: port problem with message server

Dear all,
I have a problem with our broadcasting in BW7.
I've checked all the pameters in ICM, that is correct.
I used RSBB_URL_PREFIX_GET to check HTTP server host and port
settings, and also check for message server.
The port of message server is 8101, and for ICM is 8001.
In RZ10, they are set as:
icm/server_port_0 PROT=HTTP,PORT=80$$
ms/server_port_0 PROT=HTTP,PORT=81$$
When I use broadcasting, the port 8101 is taken, and the error message is displayed:
'Page cannot be displayed
If I change the port to 8001 in address, it works.
As the how-to guide for Enabling BW web functionaality after new installation, the port 8101 would be reset to 8001 automatically when executing.
But it doesn't work.
Do you have any idea?
Thanks a lot!
Juan

Hi,
I have modified PORT=80$$ to 8001, and 81$$ to 8101, but the error occurs always.
Could anyone help?
Juan

Integrating calendar server with messaging server

hi all,
i have installed messaging server but am not able to bind messaging server and calendar server together.the calendar server does not start with ./start-cal command.i am attaching the ics.conf file below.
!!!! ics.conf Parameter Specification: You can have three kinds of records
!!!! #1) Uncommented Key: Starts with alphabet [a-z] and in the form a="b"
!!!! #2) Commented key: Start with !!<alphabet> OR !![a-z]
!!!! And in the form !!a="b" (min 7 chars length)
!!!! #3) Commented Lines: Starts with ! But not with !![a-z]
!!!! #4) Records other than types #1, #2, #3 will be ignored or won't be
!!!! processed e.g. blank lines, lines starting with non-alphabets etc..
!!!! All these parameters are SINGLE valued
!!!! Imaginary Domain Names siroe.com, varrius.com, florizel.com, and sesta.com
!!!! are used in the examples below.
! Description sent with insufficient disk space messages.
alarm.diskstat.msgalarmdescription = "percentage calendar partition diskspace available"
! Number of seconds between monitoring disk space.
alarm.diskstat.msgalarmstatinterval = "3600"
! Percentage of available disk space that triggers sending a warning message.
alarm.diskstat.msgalarmthreshold = "10"
! Whether alarm.diskavail.msgalarmthreshold is above or below percentage. -1 is below and 1 would be above.
alarm.diskstat.msgalarmthresholddirection = "-1"
! Number of hours between sending warning messages about insufficient disk space sent out.
alarm.diskstat.msgalarmwarninginterval = "24"
! Specifies the SMTP host for server alarms.
alarm.msgalarmnoticehost = "sonlinux.bg2iop.com"
! Specifies the SMTP port for server alarms.
alarm.msgalarmnoticeport = "25"
! Who are server alarms sent to?
alarm.msgalarmnoticercpt = "[email protected]"
! When server alarms are sent, who is the sender?
alarm.msgalarmnoticesender = "[email protected]"
! Default is "From: %s\nTo: %s\nSubject: ALARM: %s of \"%s\" is %u\n\n%s\n"
alarm.msgalarmnoticetemplate = ""
! Description sent with no service response messages.
alarm.responsestat.msgalarmdescription = "calendar service not responding"
! Number of seconds between monitoring services.
alarm.responsestat.msgalarmstatinterval = "3600"
! Only trigger sending a warning message if no service response.
alarm.responsestat.msgalarmthreshold = "100"
! Whether alarm.responsestat.msgalarmthreshold is above or below percentage. -1 is below and 1 would be above.
alarm.responsestat.msgalarmthresholddirection = "-1"
! Number of hours between sending warning messages about no service response sent out.
alarm.responsestat.msgalarmwarninginterval = "24"
! Enable (yes) or Disable (no) browser cache for performance reasons.
browser.cache.enable = "no"
! Retry time in seconds after a recoverable alarm delivery error.
caldb.berkeleydb.alarmretrytime = "300"
caldb.berkeleydb.archive.enable = "0"
! Interval between hotbackup or archivebackup in seconds
caldb.berkeleydb.archive.interval = "120"
! Maximum number of days of archivebackup
caldb.berkeleydb.archive.maxdays = "6"
! Minimum number of days of archivebackup
caldb.berkeleydb.archive.mindays = "3"
caldb.berkeleydb.archive.path = "/var/opt/sun/calendar/csdb/archive"
! Percentage threshold of allowable disk space usage
caldb.berkeleydb.archive.threshold = "70"
! Seconds between checkpointing.
caldb.berkeleydb.checkpointinterval = "60"
! Remove checkpoint files after synchronized? (yes/no)
caldb.berkeleydb.circularlogging = "yes"
! Milliseconds between checking database deadlocks.
caldb.berkeleydb.deadlockinterval = "100"
! Enable more advanced notifications - replyevent/refreshevent/replytodo/refreshtodo considered
! as advanced topics. By default, all these notifications will be published to
! modifyevent and modifytodo respectively. If it is enabled modifyevent will get only
! organizer updates to components and attendees replies and the refreshes triggered by replies
! to components will be published to the respective topics. (yes/no)
caldb.berkeleydb.ensmsg.advancedtopics = "no"
! Create an ENS message when a calendar is created? (yes/no)
caldb.berkeleydb.ensmsg.createcal = "no"
! Create an ENS message when an event is created? (yes/no)
caldb.berkeleydb.ensmsg.createevent = "no"
! Create an ENS message when a task is created? (yes/no)
caldb.berkeleydb.ensmsg.createtodo = "no"
! Create an ENS message when a calendar is deleted? (yes/no)
caldb.berkeleydb.ensmsg.deletecal = "no"
! Create an ENS message when an event is deleted? (yes/no)
caldb.berkeleydb.ensmsg.deleteevent = "no"
! Create an ENS message when a task is deleted? (yes/no)
caldb.berkeleydb.ensmsg.deletetodo = "no"
! Create an ENS message when a calendar is modified? (yes/no)
caldb.berkeleydb.ensmsg.modifycal = "no"
! Create an ENS message when an event is modified? (yes/no)
caldb.berkeleydb.ensmsg.modifyevent = "no"
! Create an ENS message when a task is modified? (yes/no)
caldb.berkeleydb.ensmsg.modifytodo = "no"
! Initial size of the in-memory Event Notification Server message queue. This queue stores all ENS messages other than alarm reminders.
caldb.berkeleydb.ensmsg.qsize = "10000"
! Create an ENS message when an event is refreshed? (yes/no)
caldb.berkeleydb.ensmsg.refreshevent = "no"
! Create an ENS message when a task is refreshed? (yes/no)
caldb.berkeleydb.ensmsg.refreshtodo = "no"
! Create an ENS message when an event is replied? (yes/no)
caldb.berkeleydb.ensmsg.replyevent = "no"
! Create an ENS message when a task is replied? (yes/no)
caldb.berkeleydb.ensmsg.replytodo = "no"
! Create an ENS message when a scheduling request written to the calendar is deleted? (yes/no)
caldb.berkeleydb.ensmsg.schedreq = "no"
! Physical path location of database event, task, and alarm files.
caldb.berkeleydb.homedir.path = "/var/opt/sun/calendar/csdb"
caldb.berkeleydb.hotbackup.enable = "0"
! Maximum number of days of hotbackup
caldb.berkeleydb.hotbackup.maxdays = "6"
! Path for archivebackup
!caldb.berkeleydb.archive.path
! Path for hobackup
!caldb.berkeleydb.hotbackup.path
! Enable/disable of archivebackup feature, yes/no
!caldb.berkeleydb.archive.enable
! Enable/disable of hotbackup feature, yes/no
!caldb.berkeleydb.hotbackup.enable
! Minimum number of days of hotbackup
caldb.berkeleydb.hotbackup.mindays = "3"
caldb.berkeleydb.hotbackup.path = "/var/opt/sun/calendar/csdb/hotbackup"
! Percentage threshold of allowable disk space usage
caldb.berkeleydb.hotbackup.threshold = "70"
! Max megabytes of checkpoint file.
caldb.berkeleydb.logfilesizemb = "10"
! Max threads of database.
caldb.berkeleydb.maxthreads = "10000"
! Megabytes of shared memory.
caldb.berkeleydb.mempoolsizemb = "4"
! Time before which to purge deletelog
caldb.berkeleydb.purge.deletelog.beforetime = "86400"
! Time interval between auto purge of deletelog
caldb.berkeleydb.purge.deletelog.interval = "86400"
! If "yes", open the database in readonly mode
caldb.berkeleydb.readonly = "no"
! Email of calendar database administrator.
caldb.calmaster = "[email protected]"
! Seconds between checkpointing.
caldb.cld.cache.checkpointinterval = "60"
! Remove checkpoint files after synchronized? (yes/no)
caldb.cld.cache.circularlogging = "yes"
!service.calendarsearch.ldap.primaryownersearchfilter = "(&(|(uid=*%s*)(cn=*%s*))(objectclass=icsCalendarUser))"
! Enables ("yes") or disables ("no") cld db cache
caldb.cld.cache.enable = "yes"
! Physical path location of cache database
caldb.cld.cache.homedir.path = "/var/opt/sun/calendar/csdb/cld_cache"
! Max megabytes of checkpoint file.
caldb.cld.cache.logfilesizemb = "10"
! Max threads of database.
caldb.cld.cache.maxthreads = "1000"
! Megabytes of shared memory.
caldb.cld.cache.mempoolsizemb = "4"
! Type of Calendar Lookup Database plugin to use ("local" "algorithmic" or "directory").
caldb.cld.type = "local"
! Count data base statistics? (yes/no)
caldb.counters = "yes"
! Maximum number of calendars with counters.
caldb.counters.maxinstances = "100"
! Maximum number of backlogged requests before the server obtains a new network connection.
caldb.dwp.connthreshold = "1"
! Initial number of connections for DWP client to make to each DWP host.
caldb.dwp.initconns = "2"
! Initial number of threads for handling DWP requests.
caldb.dwp.initthreads = "2"
! Maximum number of connections allowed to a DWP server.
caldb.dwp.maxcons = "1000"
! Maximum number of threads to service HTTP requests in csdwpd.
caldb.dwp.maxthreads = "1000"
! Specifies if the server performs MD5 hash checking of all DWP requests.
caldb.dwp.md5 = "n"
! IP address of a specified DWP server.
!!caldb.dwp.server.[hostname.xyz.com].ip = "a.b.c.d"
! Port number of a specified DWP server (Algorithmic CLD only).
!!caldb.dwp.server.[hostname.xyz.com].port = "59779"
! Default DWP server (LDAP CLD only), used if user's icsDWPhost value does not exist.
!!caldb.dwp.server.default = "hostname.xyz.com"
! Stack size for DWP threads.
caldb.dwp.stacksize = "65536"
! Process alarms on the alarm queue -- that is, store them in the alarm queue when an event/todo is saved
caldb.serveralarms = "1"
! Timeout for contacting ENS. If no response, we assume ENS is not running
caldb.serveralarms.acktimeout = "30"
! Dispatch -- that is, enable alarm dispatching. When an alarm trigger time arrives send out email or ENS message.
caldb.serveralarms.dispatch = "yes"
! Enable binary alarms. Used by csnotifyd and csadmind. (default: yes)
!caldb.serveralarms.binary.enable = "yes"
! Binary alarm url. Used by csnotifyd and csadmind. (default: enp:///ics/alarm)
!caldb.serveralarms.binary.url = "enp:///ics/alarm"
! Custom alarm url. Use this to get xml or calendar mime type contents
!caldb.serveralarms.url = "enp:///ics/customalarm"
! Custom alarm url contenttype. (text/xml or text/calendar)
!caldb.serveralarms.contenttype = "text/calendar"
! Dispatch type for Calendar Server alarms ("ens" o "smtp").
caldb.serveralarms.dispatchtype = "ens"
! Initial number of threads for the Event Notification Server.
caldb.serveralarms.initthreads = "0"
! Specifies how long, in seconds, the server will continue to try reconnecting to ENS before giving up. -1 means forever.
caldb.serveralarms.maxretrytime = "-1"
! Maximum number of threads for the Event Notification Server
caldb.serveralarms.maxthreads = "10"
! Time to sleep, in seconds, after a timeout connecting to ens before making another attempt to connect to ens
caldb.serveralarms.retryinterval = "5"
! Stack frame size for Event Notification Server threads.
caldb.serveralarms.stacksize = "65536"
! Total time, in seconds, to retry connecting to ENS on startup.
caldb.serveralarms.startupretrytime = "30"
! Send alarms to this SMTP host.
caldb.smtphost = "sonlinux.bg2iop.com"
! Specifies the directory in cal/bin/config containing the localized version of the files used to format email notifications.
caldb.smtpmsgfmtdir = "en"
! Specifies the SMTP port.
caldb.smtpport = "25"
! Event reminder format file.
calmail.eventreminder.fname = "mail_eventreminder.fmt"
! Event cancellation format file.
calmail.imipeventcancel.fname = "mail_eventcancel.fmt"
! Event CANCEL NOTIFICATION message format file
calmail.imipeventcancelnotification.fname = "mail_eventcancelnotification.fmt"
calmail.imipeventcancelnotificationrecur.fname = "mail_eventcancelnotificationrecur.fmt"
! Event NOTIFICATION message format file
calmail.imipeventnotification.fname = "mail_eventnotification.fmt"
calmail.imipeventnotificationrecur.fname = "mail_eventnotificationrecur.fmt"
! Event notification format file.
calmail.imipeventpublish.fname = "mail_eventpublish.fmt"
! Event REPLY message format file
calmail.imipeventreply.fname = "mail_eventreply.fmt"
! Event REQUEST message format file
calmail.imipeventrequest.fname = "mail_eventrequest.fmt"
! Task cancellation format file.
calmail.imiptodocancel.fname = "mail_todocancel.fmt"
! Task notification format file
calmail.imiptodopublish.fname = "mail_todopublish.fmt"
! Task REPLY message format file
calmail.imiptodoreply.fname = "mail_todoreply.fmt"
! Task REQUEST Message format file
calmail.imiptodorequest.fname = "mail_todorequest.fmt"
! Task reminder format file.
calmail.todoreminder.fname = "mail_todoreminder.fmt"
! Anonymous login CALID.
calstore.anonymous.calid = "anonymous"
! Does server support only two privacy types for components - PRIVATE (acts as confidential) /PUBLIC instead of PRIVATE/CONFIDENTIAL/PUBLIC
calstore.binaryprivacy.mode = "no"
! When creating new calendar of user, whether to lowercase calendar or not
! Also, when looking up calendar, whether to lowercase or not
calstore.calendar.create.lowercase = "n"
! For a newly created calendar, set the ACL to this
calstore.calendar.default.acl = "@@o^a^r^g;@@o^c^wdeic^g;@^a^fs^g;@^c^^g;@^p^r^g"
! Definition of the "owner" acl
calstore.calendar.owner.acl = "@@o^a^rsf^g;@@o^c^wdeic^g"
! Timezone ID used when importing files.
calstore.default.timezoneID = "America/New_York"
! Whether to filtering the private/confidential events on queries to server
calstore.filterprivateevents = "yes"
! Is user's default calendar included in user's freebusy-calendar-list or not
calstore.freebusy.include.defaultcalendar = "yes"
! Can user's default calendar be removed from user's freebusy-calendar-list or not
calstore.freebusy.remove.defaultcalendar = "no"
! Maximum number attendees to be allowed in a LDAP group when expanding event. Value of 0 means expand group entirely.
calstore.group.attendee.maxsize = "0"
! Maximum number of events created by recurrence
calstore.recurrence.bound = "60"
! Is user's default calendar included in user's subscribed-calendar-list or not
calstore.subscribed.include.defaultcalendar = "yes"
! Can user's default calendar be removed from user's subscribed-calendar-list or not
calstore.subscribed.remove.defaultcalendar = "no"
! For attendee calendar lookup, when encountering string that looks like (jdoe OR jdoe:tv), treat string as a userid (uid) when looking-up in Directory.
! Value can be {uid | cn | gid | res | mailto | cap}
calstore.unqualifiedattendee.fmt1.type = "uid"
! For attendee calendar lookup, when encountering string that looks like ([email protected]) (has @ sign), treat string as a mailto address when looking-up in Directory
! Value can be {uid | cn | gid | res | mailto | cap}
calstore.unqualifiedattendee.fmt2.type = "mailto"
! For attendee calendar lookup, when encountering string that looks like (John Doe) (has space), treat string as a common name (cn) when looking-up in Directory
! Value can be {uid | cn | gid | res | cap}
calstore.unqualifiedattendee.fmt3.type = "cn"
! Maximum number of results returned from LDAP lookup from user search. Value of 0 means no limit.
calstore.userlookup.maxsize = "200"
! Is Server in Virtual Domain mode or not (this affects 5.0p2 only)
calstore.virtualdomain.mode = "n"
! Enable (y) or disable (n) Access Control plugin.
csapi.plugin.accesscontrol = "n"
! Load only the plugin specified in csapi.plugin.authentication.name? (y/n)
csapi.plugin.authentication = "n"
! Enable (y) or disable (n) Calendar Lookup Database plugins.
csapi.plugin.calendarlookup = "n"
! Specifies the name of a specific Calendar Lookup Database plugin to load. If "*", load the plugins.
csapi.plugin.calendarlookup.name = "*"
! Load only the plugin specified in csapi.plugin.database.name or if not specified, load all database plugins in alphabetical order.
csapi.plugin.database = "y"
! Only load this specific plugin if csapi.plugin.loadall is no and csapi.plugin.database is yes.
csapi.plugin.database.name = "cs_caldb_berkeley10"
! Load only the plugin specified in csapi.plugin.datatranslator.name? (y/n)
csapi.plugin.datatranslator = "y"
! Only load this specific plugin if csapi.plugin.loadall is no and csapi.plugin.data translator is yes.
csapi.plugin.datatranslator.name = "cs_datatranslatorcsv10"
! Enable (y) or disable (n) database-to-output format plugins.
csapi.plugin.dbtranslator = "y"
! If "*", then load all the database-to-output format plugins. If a library name, only load that plugin. csapi.plugin.dbtranslator must be set to "yes" to load plugin
csapi.plugin.dbtranslator.name = "*"
! Load all plugins found in the plugins directory? (y/n)
csapi.plugin.loadall = "n"
! Load only the plugin specified in csapi.plugin.userprefs.name? (y/n)
csapi.plugin.userprefs = "n"
! Load only this plugin if csapi.plugin.loadall is no and csapi.plugin.userprefs is yes.
!!csapi.plugin.userprefs.name = "plugin_name"
! Enable the RSA Cypher Encryption Family Services for SSL
!!encryption.rsa.nssslactivation = "on"
! Define the Certificate name for the RSA Cypher Encryption Family
!!encryption.rsa.nssslpersonalityssl = "SampleSSLServerCert"
! Define the location of the RSA Cypher Encryption Family token
!!encryption.rsa.nsssltoken = "internal"
! Specifies if the auto refresh feature is enabled or disbaled. (yes/no)
gse.autorefreshreplystatus = "yes"
! Specifies (in seconds) how long to wait before the server scans the schedule queue for incoming jobs.
gse.belowthresholdtimeout = "3"
! Maximum number of concurrent threads the server uses to process the schedule queue.
gse.maxthreads = "10"
! Maximum length of time the server will retry to complete a group scheduling job.
gse.retryexpiredinterval = "86400"
! Specifies (in seconds) how often the server will retry a previous failing job.
gse.retryinterval = "300"
! Maximum stack size (in bytes) of a group scheduling thread
gse.stacksize = "65535"
! global flags to control notification for invitation and cancellation.
! Enable (yes) Disable (no), default is enabled. Notification will be sent.
ine.cancellation.enable = "yes"
ine.invitation.enable = "yes"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.basedir.path = "/opt/sun"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.betamajorversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.betaminorversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.caldbtype = "local"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csinstalldir.path = "/opt/sun"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodbasedir.path = "/opt/sun/calendar"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodclassesdir.path = "/opt/sun/calendar/classes"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csproddir.path = "/opt/sun"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodjavadir.path = "???"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodlibdir.path = "/opt/sun/calendar/lib"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodtoolsdir.path = "/opt/sun/calendar/tools"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csproduicustdir.path = "/opt/sun/calendar/uicust"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.fullversion = "6.0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.majorversion = "6"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.minorversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.osarch = "i386"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.osname = "linux"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.ostype = "unix"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.osversion = "2.6.9-22.el"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.patchversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.serveruidpassword = "icsuser"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.startupafterinstall = "no"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.startupatboot = "no"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.userauthtype = "ldap"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.userprefstype = "ldap"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.version = "6.0"
! Base DN for LDAP authentication. If not specified, use local.ugldapbasedn.
local.authldapbasedn = "o=bg2iop.com, dc=bg2iop,dc=com"
! Bind credentials (password) for user specified in local.authldapbinddn.
local.authldapbindcred = "admin123"
! DN used to bind to LDAP authentication host to search for user's dn.
local.authldapbinddn = "cn=Directory Manager"

Hi Venigalla,
You can implement a federated portal network (FPN) using the SAP NetWeaver platform to share content between portals.
A federated portal network allows organizations with distributed portal installations, both SAP and non-SAP, to provide a single portal access point per user to portal information, services and applications distributed on portals in the network.
WSRP-based application sharing (FPN Mode used for for integrating content between SAP and Non SAP portals) :-
--> Content administrators on a SAP NetWeaver consumer portal can integrate WSRP portlets (i.e. iViews) from remote non-SAP portals into SAP NetWeaver Portal.
--> SAP NetWeaver developers can create WSRP compliant iViews that can be consumed in non-SAP consumer portals.
You may kindly go through the below link, should be helpful:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/23fb36cad10d23e10000000a1553f7/frameset.htm
Regards,
Anagha

Has anyone had success with Messaging Server 5.2 under Windows 2000 Server?

Just to be up front - we MUST use Windows 2000 - they're not giving me a choice to move to Solaris or Sun Hardware. Linux isn't even a choice, nor is WinNT. (I know, it's annoying).
I've managed to get Directory Server 5.1 to run under windows 2000 without active directory installed. I found that I needed to modify the ims_dssetup.pl script that comes with the Messaging Server 5.2 to reference the full path to my ldapsearch and ldapmodify executables. Apparently, this is a win2k specific problem, and is not necessary on WinNT. This made ims_dssetup.pl work and the install of Messaging Server 5.2 work on a windows 2000 machine.
However, at reboot, the job controller and dispatcher do not automatically start. When I try to start the services manually, I get "Error 1067: The Service terminiated unexpectedly".
Any ideas? I'm desperate here - they're gonna make us use exchange if I can't get >>something<< working. Even a 4.x version of messaging server will do.
Thanks

Well, I do understand that.
However, I've installed iMS 5.2 on win2k several times (I admit, w2k pro, not server), and i've never installed AD.
If you can get it installed and working for your default domain, but not for other domains, then most likely it has nothign to do with AD or AD domains. iMS idea of domains is very different from AD's idea of domains. We need to be very clear about such.
for iMS, you have to create additional domains through Delegated Admin, as either "Hosted Domains" or as "Vanity Domains". We do not suggest using "Vanity Domains", and support for such is deprecated.
Once you have created "Hosted Domains" through Delegated Admin, you can add users to those domains, and they should work, just fine.

JCo APIs fail with Message Server

Hi Experts,
I use JCo 2.0 to interact with SAP System via Message Server.
When My application try to connect, it's generated this error:
Connect_PM MSHOST=HOST, R3NAME=XYZ, GROUP=GROUP
ERROR       service 'sapmsXYZ' unknown
TIME        Tue May 19 15:09:28 2009
RELEASE     620
COMPONENT   NI (network interface)
VERSION     36
RC          -3
MODULE      nixxi_r.c
LINE        2606
DETAIL      NiIServToAddr
COUNTER     7
.^.
What is the problem?
Thanks.
Marco Genova
Edited by: m.genova on May 19, 2009 4:23 PM

Hello,
The services mapping (name vs. TCPor UDP port number) are specified in /etc/services or the corrsponding file for your OS.
Obviously "sapmsXYZ" is missing there. sapmsXYZ should match the TCP port of the message server.
Kind regards,
Tsvetomir

Problem with message server.

Hi folks,
We had to use IDES (4.7) on a standalone workstation to test some BizTalk functionality.
The workstation has Windows Server 2003 and we only have SQL Server 2000 available with us.
The installation has gone through fine, we are able to even log into the 000 client with the SAP* userid. How ever, the MMC reports that the message server has errors and has STOPPED the service.
I have scourged the forum trying to look out for answers but is a NO GO till now.
Please help.
Below is the info i think might be useful for trouble shooting.
The log from devms:_
[Thr 3048] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3044) [msxxserv.c   1671]
[Thr 3048] ***LOG Q0I=> NiPGetServByName2: service 'sapmsIDS' not found: getservbyname_r [ninti.c 505]
[Thr 3048] *** ERROR => MsSCommInit: NiBufListen(sapmsIDS) (rc=NIESERV_UNKNOWN) [msxxserv.c   8878]
[Thr 3048] *** ERROR => MsSInit: MsSCommInit [msxxserv.c   1699]
[Thr 3048] *** ERROR => main: MsSInit [msxxserv.c   5317]
[Thr 3048] ***LOG Q02=> MsSHalt, MSStop (Msg Server 3044) [msxxserv.c   5365]
The log from devw0:_
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c   16042]
M *** ERROR => ThMBufFullRead: ThOpcodeToMsg [thxxmbuf.c   192]
M *** ERROR => ThMBufGet: ThMBufFullRead [thxxmbuf.c   150]
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c   16042]
M *** ERROR => ThSysAdmMsg: ThAdmSend [thxxab.c     6790]
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c   16042]
M *** ERROR => ThMBufFullRead: ThOpcodeToMsg [thxxmbuf.c   192]
M *** ERROR => ThMBufGet: ThMBufFullRead [thxxmbuf.c   150]
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c   16042]
M *** ERROR => ThMBufFullRead: ThOpcodeToMsg [thxxmbuf.c   192]
M *** ERROR => ThMBufGet: ThMBufFullRead [thxxmbuf.c   150]
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c   16042]
M *** ERROR => ThMBufFullRead: ThOpcodeToMsg [thxxmbuf.c   192]
M *** ERROR => ThMBufGet: ThMBufFullRead [thxxmbuf.c   150]
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c   16042]
M *** ERROR => ThMBufFullRead: ThOpcodeToMsg [thxxmbuf.c   192]
M *** ERROR => ThMBufGet: ThMBufFullRead [thxxmbuf.c   150]
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c   16042]
M *** ERROR => ThMBufFullRead: ThOpcodeToMsg [thxxmbuf.c   192]
M *** ERROR => ThMBufGet: ThMBufFullRead [thxxmbuf.c   150]
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c   16042]
M *** ERROR => ThMBufFullRead: ThOpcodeToMsg [thxxmbuf.c   192]
M *** ERROR => ThMBufGet: ThMBufFullRead [thxxmbuf.c   150]
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c   16042]
M *** ERROR => ThSysAdmMsg: ThAdmSend [thxxab.c     6790]
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c   16042]
M *** ERROR => ThSysAdmMsg: ThAdmSend [thxxab.c     6790]
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c   16042]
M *** ERROR => ThMBufFullRead: ThOpcodeToMsg [thxxmbuf.c   192]
M *** ERROR => ThMBufGet: ThMBufFullRead [thxxmbuf.c   150]
The services file under /etc folder has the below entry entered correctly.
sapmsIDS         3600/tcp
The hosts file also has the correct entry
127.0.0.1       localhost
Can anybody help resolve the problem?

> We had to use IDES (4.7) on a standalone workstation to test some BizTalk functionality.
> The workstation has Windows Server 2003 and we only have SQL Server 2000 available with us.
If you have a valid license you can download a recent installation version with SQL Server 2005.
>
> [Thr 3048] ***LOG Q0I=> NiPGetServByName2: service 'sapmsIDS' not found: getservbyname_r [ninti.c 505]
> The services file under /etc folder has the below entry entered correctly.
> sapmsIDS         3600/tcp
Is there a new line unterneath this entry?
>
> The hosts file also has the correct entry
> 127.0.0.1       localhost
Is that all you have in your hosts? Usually you should have the hostname plus the IP addresse of the system.
Markus

NCO3 - Connection with Message Server via SapRouter fails

Hello @all,
i have successfully used nco3 as client (.net framework 3.5 / VS 2008) with an application server connection via saprouter.
But i tried several ways to connect to a message server via saprouter without luck.
The parameters i used to connect:
        parameters(RfcConfigParameters.Name) = "Test"
        parameters(RfcConfigParameters.MaxPoolSize) = Convert.ToString(5)
        parameters(RfcConfigParameters.IdleTimeout) = Convert.ToString(10)
        parameters(RfcConfigParameters.User) = ...
        parameters(RfcConfigParameters.Password) = ...
        parameters(RfcConfigParameters.Client) = "100"
        parameters(RfcConfigParameters.Language) = "DE"
        parameters(RfcConfigParameters.MessageServerHost) = ...
        parameters(RfcConfigParameters.SystemID) = ...
        parameters(RfcConfigParameters.LogonGroup) = "USER"
        parameters(RfcConfigParameters.SAPRouter) = ...
I always get an SAP.Middleware.Connector.RfcCommunicationException with following exception details:
InnerException     Nothing
Message     ""
Source     "sapnco_utils"
StackTrace     bei SAP.Middleware.Connector.CpicConnection.getASfromMS(Dictionary`2 options)
   bei SAP.Middleware.Connector.CpicConnection.parseConnParameters(Dictionary`2 options)
   bei SAP.Middleware.Connector.CpicConnection.ConnectAsClient(Dictionary`2 options)
   bei SAP.Middleware.Connector.RfcConnection.ConnectAsClient(RfcConfigParameters options)
   bei SAP.Middleware.Connector.RfcConnectionPool..ctor(RfcDestination d, Boolean forRepositoryCalls, String uniqueKey)
   bei SAP.Middleware.Connector.RfcConnectionManager.GetClient(RfcDestination destination, Boolean forRepository)
   bei SAP.Middleware.Connector.RfcDestination.GetClient(Boolean forRepository)
   bei SAP.Middleware.Connector.RfcDestination.Ping()
Because of empty error message I don't know what to do. It seems that nco3 can't get the application server from the message server, but why? The connection via the old nco2 (VS 2003) works and also if i try to connect with the saplogon ocx from sapgui (some short code in vb6) the connection is established.
Anyone can help me???
Thanks a lot.

parms.Add(RfcConfigParameters.MessageServerHost, "192.168.0.1");
                parms.Add(RfcConfigParameters.SystemID, "MGF");
                parms.Add(RfcConfigParameters.GatewayHost, "192.168.0.1");
                parms.Add(RfcConfigParameters.SAPRouter, "/H/145.145.150.240/H/");
                parms.Add(RfcConfigParameters.User, "mysapuser");
                parms.Add(RfcConfigParameters.Password, "********");
                parms.Add(RfcConfigParameters.Client, "200");
                parms.Add(RfcConfigParameters.Language, "en");
                parms.Add(RfcConfigParameters.PoolSize, "5");
                parms.Add(RfcConfigParameters.MaxPoolSize, "10");
                parms.Add(RfcConfigParameters.IdleTimeout, "6000");
I guess you are missing RfcConfigParameters.GatewayHost parameter. Try code snippet given above.
Regards,
Ahmed Brohi

Problem: VSS error with 'SQL Server Backup to Windows Azure Tool' installed

When 'SQL Server Backup to Windows Azure Tool' is installed, shadow copies cannot be enable and backups fail. When attempting to enable shadow copies, we get a "volsnap" error: "The shadow copies of volume X were aborted because
of a failed free space computation". After uninstalling the "Tool", VSS works. Reinstalling "Tool" causes the problem to return.
While the error suggests a space issue, there is plenty of space on the server's two volumes. Additionally, another 100GB volume was added and VSS storage was allocated to it; still received the error.
Issue seems to point to 'SQL Server Backup to Windows Azure Tool'.
Environment: Hyper-V guest: "Windows Server 2012 R2 Standard" with "SQL Server 2008 R2 Standard". Using "Azure Storage" for SQL backups.
Suggestions?

Hello,
Yes, we have a confirmed interference between the tool and the VSS Framework. This was identified very recently and is under investigation by the product group. Since the issue is within the filter driver shipped by the tool, that unfortunately means that
you currently need to choose between the tool and a working VSS Framework. If the latter is more important, then uninstall the tool (that will require a restart).
We apolologize for the inconvenience. I'm going to try to get the home page of the tool updated to avoid other situations like yours. Hopefully we should see a new version of the tool soon.
As a side note, recent versions of SQL Server can directly use Azure Storage as backup target, see
http://msdn.microsoft.com/en-us/library/jj919148(v=sql.110).aspx.
Regards,
Guillaume Fourrat - Microsoft France

Error with Sql Server and Java App

Hi i have a java based multithread application which comunicate with SQL SERVER via DSN bridge , some time my application crashes with this error any idea what its happend and how to remove it .
Thanks
************* Exception ********************************8
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x77F87EEB
Function=RtlEnterCriticalSection+0xB
Library=F:\WINNT\system32\ntdll.dll
Current Java thread:
at sun.jdbc.odbc.JdbcOdbc.numResultCols(Native Method)
at sun.jdbc.odbc.JdbcOdbc.SQLNumResultCols(JdbcOdbc.java:4625)
at sun.jdbc.odbc.JdbcOdbcStatement.getColumnCount(JdbcOdbcStatement.java:1235)
at sun.jdbc.odbc.JdbcOdbcStatement.execute(JdbcOdbcStatement.java:352)
- locked <04DC3EE0> (a sun.jdbc.odbc.JdbcOdbcStatement)
at sun.jdbc.odbc.JdbcOdbcStatement.executeUpdate(JdbcOdbcStatement.java:288)
at advcomm.advrad.DBParams.Ltht(Unknown Source)
at advcomm.advrad.DBParams.BDhb(Unknown Source)
at advcomm.advrad.DlkhlHz.run(Unknown Source)
Dynamic libraries:
0x00400000 - 0x00406000 F:\j2sdk1.4.1_03\bin\java.exe
0x77F80000 - 0x77FFC000 F:\WINNT\system32\ntdll.dll
0x7C2D0000 - 0x7C335000 F:\WINNT\system32\ADVAPI32.dll
0x7C570000 - 0x7C623000 F:\WINNT\system32\KERNEL32.dll
0x77D30000 - 0x77DA8000 F:\WINNT\system32\RPCRT4.dll
0x78000000 - 0x78045000 F:\WINNT\system32\MSVCRT.dll
0x75030000 - 0x75044000 F:\WINNT\system32\WS2_32.DLL
0x75020000 - 0x75028000 F:\WINNT\system32\WS2HELP.DLL
0x6D340000 - 0x6D46B000 F:\j2sdk1.4.1_03\jre\bin\client\jvm.dll
0x77E10000 - 0x77E79000 F:\WINNT\system32\USER32.dll
0x77F40000 - 0x77F7C000 F:\WINNT\system32\GDI32.dll
0x77570000 - 0x775A0000 F:\WINNT\system32\WINMM.dll
0x6D1E0000 - 0x6D1E7000 F:\j2sdk1.4.1_03\jre\bin\hpi.dll
0x6D310000 - 0x6D31E000 F:\j2sdk1.4.1_03\jre\bin\verify.dll
0x6D220000 - 0x6D239000 F:\j2sdk1.4.1_03\jre\bin\java.dll
0x6D330000 - 0x6D33D000 F:\j2sdk1.4.1_03\jre\bin\zip.dll
0x6D260000 - 0x6D26B000 F:\j2sdk1.4.1_03\jre\bin\JdbcOdbc.dll
0x1F7A0000 - 0x1F7DA000 F:\WINNT\system32\ODBC32.dll
0x71710000 - 0x71794000 F:\WINNT\system32\COMCTL32.dll
0x7CF30000 - 0x7D175000 F:\WINNT\system32\SHELL32.dll
0x70A70000 - 0x70AD6000 F:\WINNT\system32\SHLWAPI.dll
0x76B30000 - 0x76B6E000 F:\WINNT\system32\comdlg32.dll
0x1F840000 - 0x1F857000 F:\WINNT\system32\odbcint.dll
0x1F9C0000 - 0x1FA27000 F:\WINNT\System32\SQLSRV32.dll
0x41090000 - 0x410BD000 F:\WINNT\System32\SQLUNIRL.dll
0x77800000 - 0x7781E000 F:\WINNT\System32\WINSPOOL.DRV
0x76620000 - 0x76631000 F:\WINNT\system32\MPR.DLL
0x77820000 - 0x77827000 F:\WINNT\system32\VERSION.dll
0x759B0000 - 0x759B6000 F:\WINNT\system32\LZ32.DLL
0x779B0000 - 0x77A4B000 F:\WINNT\system32\OLEAUT32.dll
0x7CE20000 - 0x7CF0F000 F:\WINNT\system32\ole32.dll
0x7CDC0000 - 0x7CE13000 F:\WINNT\System32\NETAPI32.dll
0x77980000 - 0x779A4000 F:\WINNT\System32\DNSAPI.dll
0x75050000 - 0x75058000 F:\WINNT\System32\WSOCK32.dll
0x751C0000 - 0x751C6000 F:\WINNT\System32\NETRAP.dll
0x77BF0000 - 0x77C01000 F:\WINNT\System32\NTDSAPI.dll
0x77950000 - 0x7797B000 F:\WINNT\system32\WLDAP32.DLL
0x7C340000 - 0x7C34F000 F:\WINNT\System32\SECUR32.DLL
0x75150000 - 0x75160000 F:\WINNT\System32\SAMLIB.dll
0x769A0000 - 0x769A7000 F:\WINNT\system32\NDDEAPI.DLL
0x1FA30000 - 0x1FA46000 F:\WINNT\System32\sqlsrv32.rll
0x1F7F0000 - 0x1F80A000 F:\WINNT\system32\odbccp32.dll
0x74CB0000 - 0x74CCA000 F:\WINNT\system32\DBNETLIB.DLL
0x75500000 - 0x75504000 F:\WINNT\system32\security.dll
0x782D0000 - 0x782F2000 F:\WINNT\system32\msv1_0.dll
0x7C740000 - 0x7C7CC000 F:\WINNT\system32\CRYPT32.dll
0x77430000 - 0x77441000 F:\WINNT\system32\MSASN1.dll
0x77340000 - 0x77353000 F:\WINNT\system32\iphlpapi.dll
0x77520000 - 0x77525000 F:\WINNT\system32\ICMP.DLL
0x77320000 - 0x77337000 F:\WINNT\system32\MPRAPI.DLL
0x773B0000 - 0x773DF000 F:\WINNT\system32\ACTIVEDS.DLL
0x77380000 - 0x773A3000 F:\WINNT\system32\ADSLDPC.DLL
0x77830000 - 0x7783E000 F:\WINNT\system32\RTUTILS.DLL
0x77880000 - 0x7790E000 F:\WINNT\system32\SETUPAPI.DLL
0x7C0F0000 - 0x7C154000 F:\WINNT\system32\USERENV.DLL
0x774E0000 - 0x77514000 F:\WINNT\system32\RASAPI32.DLL
0x774C0000 - 0x774D1000 F:\WINNT\system32\rasman.dll
0x77530000 - 0x77552000 F:\WINNT\system32\TAPI32.dll
0x77360000 - 0x77379000 F:\WINNT\system32\DHCPCSVC.DLL
0x74CD0000 - 0x74CD8000 F:\WINNT\system32\DBmsLPCn.dll
0x0B990000 - 0x0B9E6000 F:\WINNT\system32\MSVCR71.dll
0x6D2E0000 - 0x6D2EE000 F:\j2sdk1.4.1_03\jre\bin\net.dll
0x782C0000 - 0x782CC000 F:\WINNT\System32\rnr20.dll
0x777E0000 - 0x777E8000 F:\WINNT\System32\winrnr.dll
0x777F0000 - 0x777F5000 F:\WINNT\system32\rasadhlp.dll
0x74FD0000 - 0x74FEE000 F:\WINNT\system32\msafd.dll
0x75010000 - 0x75017000 F:\WINNT\System32\wshtcpip.dll
0x77920000 - 0x77943000 F:\WINNT\system32\imagehlp.dll
0x72A00000 - 0x72A2D000 F:\WINNT\system32\DBGHELP.dll
0x690A0000 - 0x690AB000 F:\WINNT\system32\PSAPI.DLL
Local Time = Wed Mar 08 17:24:41 2006
Elapsed Time = 9294
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.1_03-b02 mixed mode)
#

I'm having the same problem.
One potential solutions is to use a custom SQL server JDBC driver instead of going through the ODBC bridge. This will minimize dependencies and should also improved performance. Hope this helps.
- Joe

Live Cache error with message number /SAPAPO/OM028

Hi Experts,
When I run RLCDEL program for deletion of obsolete SNP orders in the back ground , system shows livecache error alert with message number /SAPAPO/OM028 in the deletion job log. The details of message is "invalid order" or ABAP programming error. Live cache consistency checks are not resolving issue. Product release is 5.1 with SP08. Please suggest a resolution
Regards,
Raghav

Hi Raghav,
The sap notes 642503 & 973244 will fix your issue but they are for
versions 4.0 and 5.0 respectively.
You can write to SAP by creating a OSS message to update these
two message for version 5.1
This will resolve your issue
Please confirm
Regards
R. Senthil Mareeswaran.

Error re Messaging Server Network Connection?

When I try to sync from my Desktop Manager, I get an error message stating: "The messaging server network connection is no longer available. Message synchronization cannot continue." I have tried everything I can think of (even uninstalling DM and resetting configurations). Nothing worked. Can anyone help me? I have a BB Tour and the DM (version 5.0.1) is running on Windows 7. Thank you!

Are you connected to a BES and exchange server at work?
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Digital signature with messaging server 6

Hi all,
I want to implement the following with my messaging server or even with the communication express.
Just as outlook, where users can use a digital signature; Is this possible to be done in the messaging/communication express.
If yes, can you please provide me with the procedure?
Regards,
Scotty

There is full documentation for how to set up and use "S/MIME" in CE.
http://docs.sun.com/app/docs/doc/819-2650/6n4u4dtul?q=S%2FMIME&a=view

My Facetime has always worked and now all the sudden when I try to log on from my Macbook it says the server has encountered an error with the server registration. This will not allow me to sign in. Anyone know how to fix this?

My Facetime will not work on my Macbook Pro. This has always worked in the past and now all the sudden it says that I have encountered a problem with the server and registration. I tried to check the date and time zone which is correct and I have no restrictions set.

I have the same issue. Does anybody know why this has happened

Error with message server or lgtst?

Similar Messages

Maybe you are looking for