Error with mixed AADC after 8.00c.07

After updating to 8.00c.07 some of our presort reports are not matching with what was populated in the data tables. As an example, the qualification report will show 100 pieces qualifying as 3 digit 945, but the database field for those same statements are populated as MAAD 901.

Thank you Steve for reporting this concern.
Could you please work with the Support team to log this issue and provide your job information to them?
This will help us evaluate the problem, validate the issue, and get a response back out to all of our customers.
Thanks,
   -Braden

Similar Messages

  • Error with "Replace wtih After Effects Comp"

    When I use "Replace with After Effects Comp" on a clip in Premier CS5 (Mac), it sends the clip properly, I make my effect in AE (stabilize motion), save, then go back to premier and there is not change to the clip in premier (the change was clear and obvious in AE). In the lower right is a red circle wth an X -- clicking on it indicates "an unspecified error ocurred performaning an action" on the saved AE file.
    The clip in Premier is marked red and indicates it is linked to the AE file, but the applied effect has not come through, it just looks like the original.
    However, when I make other changes in AE, sich as adding text, no problem -- it updates in Premier.
    What could be preventing "Replace with After Effects Comp" from workgin with AE stablizie image tracking files?
    Using CS5 on a Mac (10.6.7) wiht the latest updater updates installed on all CS5 products)
    Really stuck here. Thanks!
    -August

    Can I not render wihin AE and have the rendered clip automatically link into Premier?
    This method should give you realtime playback of your Ae comp
    in the Pr timeline, but you will still have to render first.
    Use the "Post-Render Action" in the Ae render queue to import your
    completed render into your Ae project, then drop it into your
    composite as the top layer, solo that layer, then save and exit.
    Open Pr, and you should be able to play the composite without
    having to render the timeline... unless there is a deficit in the
    horsepower of your rig as Jim suggested in an earlier post.
    Post-render actions
    http://help.adobe.com/en_US/aftereffects/cs/using/WS3878526689cb91655866c1103a4f2dff7-79d5 a.html
    Here are some useful links courtesy of Todd Kopriva:
    Working with Adobe Premiere Pro and After Effects
    http://help.adobe.com/en_US/aftereffects/cs/using/WS4648B7F7-2D89-4765-BC8A-271D9A7574A3a. html
    FAQ: What is the best format for rendering and exporting from After Effects?

  • Error with PS text after Unicode conversion

    Hi, we are having problem after doing unicode conversion with special
    character not displayed correctly in a Web interface. In SAP
    (transaction CN04) everything is OK, but if the PS text is displayed
    through a Web interface (BSP for instance) some characters are
    displayed wrong. One of these characters is the apostrophe in French
    language ('). Is there an available tool to perform a conversion of
    existing PS text after performing unicode upgrade ?

    Hima ... try this
    http://<server>/Lighthammer/JCOProxy?Mode=Reset

  • Error with missing files after force quit

    I just spent hours building project management pages for work when the program would not respond I was forced to force quit. Then when I try to reopen I get an error and it tells me that all of the fonts and content is missing. When I click on each page it shows me images from templates that have gone away. Has anyone experienced anything like this?

    If you have the 'keep' option enabled and let iTunes do the work - take a sound track album as an example - that has various artists and you didn't tell iTunes that the album was a compilation album - then iTunes will put all the tunes into into the iTunes Music folder as Artist>Album>Song - if you have the compilation option enabled for the tunes on that same album - iTunes will nest it as iTunes Music>Compilation>Album>Song. This helps reduce the clutter in the iTunes Music folder with a thousand artists and only one tune for that artist.
    With the 'keep' option selected iTunes will move tunes automatically within the iTunes Music folder. Since iTunes moved the files it can keep track of the links.
    To create a second library launch iTunes with the 'option' key down and follow the dialog box instructions. I have a 'Master iTunes Library' on my internal HD and several ext HD's with other libraries which I give unique names i.e.: Really Big Music. I give the library data base file its' own unique name so I don't accidentally erase the wrong file. I also keep all the files that you would normally see for an iTunes library on the ext HD (iTunes library. .xml, art work etc.,). If you are into lots of movies and TV Shows you could create a library on and ext HD with only video content and name it accordingly. You would keep all the files for that library including the library 'management' files on the ext HD in the same nesting as you would find on your internal HD.
    This strategy works for me. I tried to manage the files by myself at one point and just had to many problems so I decided to not fight City Hall and go with the flow and it works for me.
    MJ

  • Dbx error with access checking after attaching

    I used dbx - <pid> to attach to a process that had LD_PRELOAD /opt/SUNWspro/lib/librtc.so in its environment. I had previously used the same setup to enable leaks/memuse checking. When I tried to enable access checking I got the following error:
    (dbx 5) check -all
    access checking - ON
    memuse checking - ON
    RTC: Enabling Error Checking...
    RTC: access error limit reached -- disabling access checking
    RTC: Running program...
    Setup is Sol8 Forte 6U2. Any thoughts?

    Thanks. Meanwhile I've found another problem of course. I'm again trying to get access/leaks checking working in my process. This time, the process was started from within dbx, no attaching, but the process died with a SEGV in __rtc_trap_handler:
    detected a multithreaded program
    access checking - ON
    memuse checking - ON
    Running: sogo
    (process id 2972)
    RTC: Enabling Error Checking...
    RTC: Running program...
    stopped in main at line 98 in file "sogo.cpp"
    98 return ::sogo::main(argc, argv, arge);
    dbx: warning: can't find symbolic information for thrown type
    t@3 (l@3) signal SEGV (no mapping at the fault address) in __rtc_trap_handler at 0xfe9610d8
    0xfe9610d8: __rtc_trap_handler+0x0058: ld [%l5], %l0
    dbx: warning: invalid frame pointer
    (dbx 1) where
    current thread: t@3
    [1] setup_context(0xfdf90600, 0xf8ffbfa0, 0xf3514738, 0xf8f00000, 0xfc000, 0xfb7fbbd0), at 0xf35146d8
    [2] thrpcreate(0xfdf90200, 0x0, 0xfdf90600, 0x0, 0x41, 0x0), at 0xf3508fc4
    [3] thrcreate(0x0, 0x0, 0xe0900d54, 0x0, 0x41, 0x0), at 0xf3509208
    [4] thr_create(0x0, 0x0, 0xe0900d54, 0x0, 0x41, 0x0), at 0xfe947738
    [5] door_create_server(0x0, 0xffffffff, 0x2, 0x1, 0xfb7fbf18, 0x3), at 0xe0900da8
    [6] __door_return(0x25d700, 0x0, 0x0, 0x0, 0xfb7fbfa0, 0x4), at 0xf9999264
    (dbx 2)
    the actuall invocation of dbx looked like (from a script):
    dbx -C -q -c \
    "check -all -frames 16; \
    ignore SIGQUIT ; \
    dbxenv run_autostart on ; \
    runargs $* ; \
    step ; \
    cont" \
    sogo &
    Does the RTC library not play nicely with doors? Setup is still sol8/6U2.
    Thanks.

  • Invalid Partition Error with each boot after BIOS update???

    Need help from the experts:
    I have all of a sudden had problems with every boot, receiving an "invalid partition" error every timeI start my machine. ONly significant thing I have done lately is flash bios to v 1.1 on the K8N Neo2 Plat board using MSI tool. I had no such problems prior to flashing to 1.1, though I have had other problems related to memory voltage...
    What, if anything, does BIOS have to do with it? my drives are both 160GB, formatted NTFS each a single large partition...is the system thinking that's an invalid partition size?
    At any rate, I have already tried a complete low level format of my drives and re-install of Win XP Pro from scratch to make sure nothing was corrupted, and sure enough, upon next boot (needed to complete some driver installs) I get the same error. Of note, I also get an error re: one of my 2 DVD drives...related?
    So, for now, the only way around this is to boot using XP CD, execute 'R' for recovery, then use DOS command 'FIXMBR' to write a new boot record, and then I am able to get back in...until the next re-boot.
    Have had numerous issues with this board / bios, though this is the most profound one.
    Need help...this is confounding me. What should I be looking into, trying next?
    system:
    AMD 64 3500+, stock cooling
    Zalman 400B psu
    MSI K8N Neo2 PLatinum mobo
    2 GB Corsair XMS C2PT ram (4 x 512)
    2 x 160 GB Samsung HDD
    Asus E616P1 16x DVD rom
    Plextor 712A DVD RW / CDRW
    MSI 9800PRO 128
    Audigy 2 ZS

    How did you'll updates your bios?? using liveupdates or what?? what version are you trying to updates? the old to the new version of bios..btw keith can you lists down ur spec's like seacoast guy including the psu (watts and rails) in full details. Gd luck

  • Error with update CS5 after new installation (new Computer)

    Good Morning i whant to update the CS5 Programms
    but ervery time i try, an error epears (error in downloading)

    manually update,:  http://www.adobe.com/downloads/updates/

  • InDesign CC | Error with indd file - "Cannot open the file...Adobe InDesign may not support file format"

    I encountered a very strange error with InDesign CC after saving a file created in CS4. I'd attach the file but I'm not sure how to do this, if I'm able to. The file is 44kb and doesn't seem like it should be (file I saved had a large book cover). Now since the original CS4 file was overwritten using InDesign CC, the file is corrupt and I'm getting the error message displayed below. The file is not open within another application. Has anyone gotten this before?

    Thanks for your response Peter. Below is the gibber contained in the first four lines. In the first line, where it reads "mimetypeapplication" and then "indesign-idml-package", I would assume that this should've been a valid idml file.
    PK        *meEËv‰+   +       mimetypeapplication/vnd.adobe.indesign-idml-packagePK        *meE!t/k   {<     designmap.xmlÝ[ýrÚH ÿ;y •ê.µ[uk 6¶IÀ)À áb  þÈÞÖÖÖ 0e1£ IŽÙ¿ò wUw/—'¹îÑ× cc;gv«²FÝ==¿îéîé CýýíÌ5n¨ô™à ³¼U2 Êmá0>i˜ çÇ?훆  î WpÚ0çÔ7ß ¼®¿'Ì ÆÜ Z   s >9 g” ¦!)q¨¼L ï¢â1%A(é ³RÝ3 O '´á©\Ú*ý°WúÑ4P÷a¬Å lÜËœþ5€™ ÷Ö²¸¿E 1¢[¶˜YMüÔá‡Ôg n1gæZ`‚å ûšLÀ Ó8ìuS 8‹i ©; ¤ð! r~Ê|˜?¤ # ׌°\ÂÿöwŒ°62R)ú‚q( 0´i 솞’9•0f´k íîÏ ûRŒ úábk¸e\Ñ‘Ñ $ ŽñÃðª×ÿѸ©˜ÆकŠùð`tŽÚ»åÚîîO•2@ .sÚ ²Ã Šó]øT=ƒ³ 0ćÉÇ •-—r\›b±C:&¡ tfdB‹¥  ÌiÏ f_RŸÊ z4 QÇ¡NŒÓ‹¥Úb6bœ àÈÞ8 ÒäΐŒi{6¿FçØ¡ »O›¡' ¿aŽ‰ëSóàõ«ú)á“  ÅÎO ¿t #>q™?

  • Critical Hard Disk Free Space Error on Lenovo G500 after upgrading from Win8 to Win8.1

    I encountered an error with my harddrive after upgrading my Lenovo G500 from Windows 8 to Windows 8.1. The error is coming up under the Lenovo Solution Center. The error reads "Some partition in your hard drive has less than 9.5% of its capacities. It suggests to click on Fix Options; System; Storage Devices. Then it displays Internal Hard Drive ST1000LM024 HN-M101MBB.The solution center now displays 8 different partitions labled as follows:
    Drive Name: Space:
    W: WINRE_DRV. 694.99 MB free of 999.99 MB
    E... EFI SYSTEM 260 MB
    U.. UNAMED PARTITION. 0.97 GB (THIS IS THE DRIVE PRODUCING THE ERROR)
    M. MICROSOFT RESERVED PARTITION. 128 MB
    C. MICROSOFT RESERVED PARTITION. 850.43 GB FREE OF 890.72 GB
    W. WINDOWS RECOVERY ENVIRONMENT. 155.46 MB OF 449.99 MB
    D: WINDOWS RECOVERY ENVIRONMENT. 22.74 GB FREE OF 24..99 GB
    P...PBR_DRV. 1.8 GB FREE OF 13.01 GB
    I have tried to run disk clean up and optimize drives which were suggestions from the Lenovo Solution Center but neither has been successful in removing the error. Any assistance you guys can provide will help me out a lot
    Thanks,
    Dan

    I got an error when i tried disk repair ("the underlying task reported failure on exit - 1 HFS volume could not be repaired, 1 volume could not be repaired"). Is that the source of my problem?
    Hi and a warm welcome!
    Absolutely, good deduction.
    If DU can't fix it after a couple more tries then, your best bets are DiskWarrior from Alsoft...
    http://www.alsoft.com/DiskWarrior/
    Data Rescue II...
    http://www.prosofteng.com/products/data_rescue.php
    This last one would require another HD with plenty of space to recover to.
    Unfortunately, Disk Utility can't fix all that much, and the only other Apple Options are erasing the HD, or installing OSX to a second drive, then using Migration Assistant to move stuff over to the new HD.

  • Can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

    can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory

    SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
    after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
    Thanks and Regards, Rangnath Mali

    Hi Rangnath,
    For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
    Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Inbund IDOC error: Status records with status 51 after status 53

    Hi all,
    I'm looking to resolve an issue related to posting an inbound IDOC. when I process inbound IDOC created from report prg I'm getting a status message: "Status records with status 51 after 53" .
    Functionality: I'm creating an IDOC from flat file and processing it to post Customer master data into SAP. During this process creation of IDOC is successful but when I'm changing the existing data record (customer master data) IDOC is throwing this error.
    Changing data: For changing existing data I'm passing KUNNR field and overwriting the remaining data. Even though the idoc status is 51 the changed data is getting posted in to SAP. Here my concern is to see IDOC status as 53.
    Regards,
    Ganesh.
    Edited by: Ganesh Sunkara on Aug 1, 2009 3:45 AM

    Hi all,
    I solved this issue by myself. There is an error in the user exit code.
    regards,
    Ganesh.

  • Error! No data source found with name 'mynewdsname' (after asking 0 providers)

    Hi all,
    I am trying out the instructions given below.
    http://dev.day.com/docs/en/cq/current/developing/jdbc.html
    I followed them exactly but removed <cq:include script="head.jsp"/> line from the jsp since I do not have a head.jsp.
    my config node settings are as follows.
    But when I go to the page, I get below error message.
    error! No data source found with name 'mynewdsname' (after asking 0 providers)
    DB is up and running. I could not find any issue with it. Code is as follows.
    <%DataSourcePool dspService = sling.getService(DataSourcePool.class);
      try {
         DataSource ds = (DataSource) dspService.getDataSource("mynewdsname");  
    %>
    Any help will be great. TX

    Document is outdated & for now could you please follow http://dev.day.com/content/kb/home/cq5/Development/HowToConfigureSlingDatasource.html

  • Problem with connecting ipad 2 with crestron cp2e...help plss its urgent... I hv a ipad 2 with mobile pro g connected with cp2e. when i pressed any button in ipad its connet with cp2e but after 4-5 sec one error comes (warning wifi was powered off while t

    problem with connecting ipad 2 with crestron cp2e...help plss its urgent...
    I hv a ipad 2 with mobile pro g connected with cp2e. when i pressed any button in ipad its connet with cp2e but after 4-5 sec one error comes (warning wifi was powered off while the device was in auto -lock(sleep)press connect to reconnect) when i pressed again its connected with cp2e. i am using netgear wireless access point . i also has been changed access point as well as updated ipad firmware bt problem is as it is .. pls help.

    Hi have you solved the issue ?
    Cause I have the same problem.
    Tnx

  • IMac27 reboots every few days with message "Restarted after error"

    My iMac27 reboots every few days with message "Restarted after error". How do I find out what it is upset about so I can repair?

    Visit The XLab FAQs and read the FAQ on diagnosing kernel panics. Also, OS X- How to log a kernel panic and post a recent panic log (not a crash log.)

Maybe you are looking for