Error with new CPU cooler

Hello, I just put a Vantec Aeroflow AMD into my MSI K7T 266 pro2-u mboard and upno startup I get an error relating to unabling to detect CPU spinning. However it is spinning and temp was 34C. I have noticed that the three colours of wires are "yello, black and red" whereas on defauly CPU cooler it was  " Blue, Black red." Is it just a case of incompatibility as I now have disabled CPU fan detection. Thanks.

Had the same problem with same m/b and cooler. Long story short,purchased a seperate T.M.D fan rated at 5600rpm part no PD1270155B-2F and fitted to cooler and bios detected it at 5600rpm. The 5600 rpm fan was slightly noiser than the fan fitted to the vantec cooler I bought and it was gold coloured not silver. Whats also strange was cpu temp dropped from 41C to 37.5C. This raises a question that maybe the coolers are packaged with 4300rpm fans instead of 5600rpm ,the specs say 5600rpm fan but who knows. Have bought 3 vantec coolers and all three have no fan detection. Bought 3 5600rpm fans and all have fan detection. Hand held tacho rated the silver ones about 4250rpm and the gold ones at 5560rpm. Figure this one out ?(

Similar Messages

  • My MSI KT3-ULTRA2 doesn't work with my CPU cooler!!

    My MSI KT3-ULTRA2 doesn't work with my CPU cooler!!              
    I've got an MSI KT3-ULTRA2 mainbord, and I have a NEOLEC VENEZIA TB Cooler. But when I attach my NEOLEC cooler and I start the machine, the machine shuts down within a couple of seconds, and I get nothing to see on my screen. The weird thing is when I turn the PC on, the cooler starts rotating so it can't be broke, but then the pc shuts down i a couple of secs. So pleezze anybody help me!!
    The weird thing is that I also have a coolermaster cooler, and that one works fine. But the problem is that this coolermaster is designed for AMD XP 1900+, and I ahve an AMD XP 2200+ that's why I bought the Neolec Venezia TB cooler.
    Grtzz
    skeleton

    one easy thing to watch for... see if the heatsink or fan is in contact with any part of the motherboard, like... if it is too big and touches something that normally wouldn't be in contact with a fan or heatsink.  If so, it could be shorting it.

  • B2 Error with new MSI GTX 970 :(

    Hi there team!
    Just registered to try and get help. I spent around 6 hours researching + trying all the suggestions throughout many different forums, but the B2 error still persists. I am currently running the following spec:
    Mobo - MSI Z68A-G43 (G3), with version 4.30 ( I flashed bios last night and still no help)
    CPU - Intel® Core™ i5-2500K Processor, 3.5GHz etc.etc.
    RAM - Corsair Vengeance 2x4gb at 1333MHz
    GPU - MSI GTX 970 GAMING Twin Frozr V 4GB GDDR5
    PSU - Cooler Master Silent Pro 700W
    I have tried:
    -Taking out the card and using the on-board graphics to flash the bios to later version, No help. (during this process, the B2 error does NOT show up)
    -Upgraded the card to latest nVidia drivers, even uninstalled and re-installed them. No help.
    -Upgraded all the drivers from MSI, i.e. chipset etc. through Live Update 6. No help.
    When the card is in, I cannot even access bios, it just gets stuck at B2 screen for like a minute, and then carries on with the boot process. I am able to play games etc. after the booting, but this error for sure should not be there when the PC boots up. I didn't have any issues with my old GTX 560 TI. I've read different forums saying that it might have something to do with the mobo thinking that something has to be connected to the on-board graphics; or that flashing BIOS helped a lot of users, but not me :(.
    I don't have a second PC to test the card on.
    Literally, I would try anything, please someone just help :(( This card is a beast and I wanna be able to properly use it and not having to worry about this error.
    Thank you very much guys, hope someone can help!

    Quote from: gabe_dimitrov on 08-February-15, 20:40:51
    Man thank you so much! It is finally working!!! Thank you!!!! ))) It is showing correct version in BIOS, does not show B2 error whatsoever, all done! )
    Thanks for your time! You can close thread, but it's very useful for anyone that has this issue!
    Wich version of BIOS do you have installed? Can you OC your processor with new BIOS?

  • Still getting Javascript error with new version of UIX

    I'm facing some problem after changing my UIX framework version (2.2.3030829.1626).
    Currently I'm using UIX version (2.2.3030829.1626) . Paging with table is not working with new frame work .
    It is giving me javacript error "object doesn't support property or method" when clicking 'Next' .
    It's working fine with old version.
    We had used proper cabo directory. These files are in sync with the version of the runtime
    Here is our finding
    I found a error in _updateFormActions() function from MarlinCoreb2.js file.
    In this function it is giving error at
    if(a8!=a6)
    a7.action=a6 line (line # 1841,1842). If I comment out this two lines page is
    working properly without any javascript error.
    This problem is a bit tricky....
    Because it seems to be a problem with the UIX framework that only occurs on some versions of the Internet Explorer. On some version (IE 6.0.2600.0000) it works fine
    and it also works on the Mozilla Firefox browser.
    Can any one advice on the same?
    Thanks in advance
    Anindya

    I answered this question on a different thread.
    Do NOT post the same question multiple times. If you require more complete or prompt assistance than you receive on these forums, contact Oracle Support.
    -brian

  • Javascript error with new UIX framework

    Hi,
    I'm facing some problem after changing my UIX framework version (2.2.3030829.1626).
    Currently I'm using UIX version (2.2.3030829.1626) . Paging with table is not working with new frame work .
    It is giving me javacript error "object doesn't support property or method" when clicking 'Next' .
    It's working fine with old version.
    Any help is much appreciated.
    Thanks and Regards,
    Anindya

    Thanks Brian for your prompt reply
    We had used proper cabo directory. To confirm it we have done it once again.But we're still getting the same error.
    here is our finding
    I found a error in _updateFormActions() function from MarlinCoreb2.js file. 
    In this function it is giving error at
    if(a8!=a6)
    a7.action=a6 line (line # 1841,1842). If I comment out this two lines page is
    working properly without any javascript error.
    This problem is a bit tricky....
    Because it seems to be a problem with the UIX framework that only occurs on some versions of the Internet Explorer. On some version (IE 6.0.2600.0000) it works fine
    and it also works on the Mozilla Firefox browser.
    can you please advice is there any solution
    Thanks in advance
    Anindya

  • Installing a New CPU Cooler

    Is the Cooler Master Hyper 212 EVO - CPU Cooler with 120 mm PWM Fan compatible with the Dell XPS 435 desktop mother board. 

    If it has a four-pin connector like the XPS 8500, it should accept a standard cooling solution.
    I installed a Cooler Master Vortex in my XPS 8500. It has worked very well.

  • Upgrade to Yosemite, iPhoto won't open and NTFS-3G could not mount error with new external HD

    Help! 
    I just did a software update to get OS X Yosemite 10.10.2 on my MacBook Pro.
    Now iPhoto won't open and I get this error:
    "Your photo library is either in use by another application or has become unreadable....Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup."
    So I do this and try to repair the database as suggested and I get another error:
    "iPhoto will open as soon as the iPhoto library is available. Time Machine might be backing it up." 
    But it's not - no external hard drive is connected. 
    I'm terrified I can't get access to my photos (and I admit I haven't backed up with Time Machine for over a year - my mistake that I won't make again). 
    So I bought a brand new external hard drive (seagate for mac and pc, 2TB) so I could save only my photos to the hard drive (because I googled and read you can manually save your photos to disk by dragging and dropping the photo library onto the external hard drive). 
    But I can't even get the hard drive to work....I get this error
    "NTFS-3G could not mount /dev/disk2s1
    at /Volumes/Seagate Backup Plus Drive because the following problem occurred:
    /Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
    the MacFUSE file system is not available (71)"
    I google the issue again and it says to uninstall NTFS-3G but I actually think I just deleted it a long ago without uninstalling it properly??  I don't know....
    (a)  how do i fix iphoto
    (b)  how do i get external hard drives to work with this OS (I've read lots of posts and don't really understand the advice)
    (c)  how do i get all my photos onto the hard drive safely so I can import them onto a PC
    Any assistance would be magic for this little lady! 

    (c)  how do i get all my photos onto the hard drive safely so I can import them onto a PC
    First see if you can reformat the EHD to MS-DOS FAT with Disk Utility.  If you can
    open iPhoto and select all of the Events in the Events mode. Use the File ➙ Export ➙ File Export menu option and export to the EHD with these settings:
    Select the destination for the export to be the EHD or a folder on the EHD.  This process will create a folder for each Event in your library with the same name as the Event and contain the original image files.  The EHD will be useable by a PC and the photos will be available also.

  • Validation Errors with new Install of W7 x64 Ent Debug Checker On New Equipment

    I am receiving multiple Errors. I am trying to use the Windows 7 x64 Enterprise which happens to be the Debug Checker version OS as the host machine.  I have only built the machine, and tried to load the Drivers.
    I say this due to the starting issue that upon the loading of the entire driver set, (for the MB, Seagate Harddrive, and Vid Card), I would get the BSOD.  I identified that the Bluetooth driver was the issue.  I then did not load the Bluetooth
    drivers for the MB on the 5<sup>th</sup> or so install of the 7 Ent os.  (Tried Server 2k8 r2. Which is not compatible with the MB Drivers.)
    I have not received a single Update either.  The Auto update feature claims that I am up to date.  I do not believe this due to the fact that any fresh Install of any OS has about several decades of updates and reboots to go through.
    Upon trying the suggestions on the forum about turning off the IE Addons, the errors remain.  Also the results of the sfc /scannow are copied below.
    My Questions
    I am seeking assistance on solving the Errors that have refused to leave me alone , to put it humorously and am asking for your insight and wisdom.  Will you take a look??
    Do I need to go to Win 7 Ent or Ult x64 that is not a Debug Checker version.
    Are there other Microsoft download Registery file checkers besides the MGA Diag tool that are freeware that I can use to check, for corrupted registry files.
    Or do I just need to take it to the stores (Fry’s and Microcenter) that recommended the equipment and have them just reload the software and allow them the headache of solving the error issue, by paying them to install the drivers and have ALL of the
    drivers work. (including the blue tooth)
    The Goal is to turn it into a Active Directory Server using Virtual Box with Server 2k8 R2 running in the virtual box environment.
    Errors and Results.
    There are also a number of logs that show various Crit, Error, and Warning logs.  I will include those if need be.
    This is the majority of the error messages, and I have missed the opportunity to capture others.
    Internet explorer encountered Validation errors:
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 0000000000B221DB
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : comctl32.dl
    iii.     
    Assert offset: 00133A2A
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 008BE823
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 0040F9E8
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : iertutil.dll
    iii.     
    Assert offset: 001DEC51
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : KERNELBASE.dll
    iii.     
    Assert offset: 00014159
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 0000000000B221DB
    Microsoft Management Console Encountered a Validation Error
    Validation Error
    i.     
    Process Name: mmc.exe
    ii.     
    Module Name : ieframe.dll
    iii.     
    Assert offset: 00000000006C9283
    Scripted Diagnostics Native Hot encountered a Validation Error
    Validation Error
    i.     
    Process Name: sdiagnhost.exe
    ii.     
    Module Name : urlmon.dll
    iii.     
    Assert offset: 00000000001A0A73
    Validation Error
    i.     
    Process Name: sdiagnhost.exe
    ii.     
    Module Name : KERNELBASE.dll
    iii.     
    Assert offset: 0000000000017f32
    Windows System Assessment Tool encountered a validation error
    Validation Error
    i.     
    Process Name: winsat.exe
    ii.     
    Module Name : KERNELBASE.dll
    iii.     
    Assert offset: 0000000000017F32
    Windows Explorer Encountered a validation Error
    Validation Error
    i.     
    Process Name: Explored.exe
    ii.     
    Module Name : thumbcache.dll
    iii.     
    Assert offset: 00000000000300BE
    AI Suite 2 encountered a validation error
    Validation Error
    i.     
    Process Name: AI Suite 2.exe
    ii.     
    Module Name : ntdll.dll
    iii.     
    Assert offset: 000686BD
    the number “2” is the substitutedfor the roman numeral 2
    I believe that this is part of the MB Suite.
    My the environment is a new equipment, and Downloaded student software. Windows 7 Enterprise SPK 1 Debug Checker, Valid Key with the software download.  Activated on 8-12-2012
    Motherboard: Asus p9x79 Deluxe, Part number: 90-mibh50-g0aay0kz
    Chip Set: bx80619i73930k
    2x Memory: cmx16gx3m2a1600c11 Corsair
    Video Card: Diamond R7870 2GB DD OC 2xDVI/HDMI/2xDisplayport memory Clock 1250 MHz
    Hard Drive: 9jb1n3-574 (leave the last two didgets off when searching in the browser) This is a Seagate 2TB
    Generic optic drive: SH-222bb/bebe Samsung
    Here is the Microsoft Fix It error code
    Assertion Failed!
    Program:…
    File: d:\w7rtm\ds\security\cryptoapi\pki\...\newstor.cpp
    Line: 2131
    Expression: pStore->dwState = = STORE_STATE_OPEN || pStore->dwState = = STORE_STATE_OPENING || pStore->dwState = = STORE_STATE_DEFER_CLOSING || pStore->dwState = = STORE_STATE_NULL
    For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts
    (Press Retry to debug the application – JIT must be enabled)
                    Abort    Retry     Ignore
    Abort
    Closes the program
    Retry
    Repeats the error
    Verbatim
    Ignore
    Closes the program
    Nothing happens
    Here is the Microsoft Genuine Advantage Diagnostic Report
    Diagnostic Report (1.9.0027.0):
    Windows Validation Data-->
    Validation Code: 0
    Cached Online Validation Code: N/A, hr = 0xc004f012
    Windows Product Key: *****-*****-*****-*****-8C7YB
    Windows Product Key Hash: cezvXJ2/mUhIEFxJfWkZ3IN8EQQ=
    Windows Product ID: 55041-146-2397786-86942
    Windows Product ID Type: 6
    Windows License Type: Volume MAK
    Windows OS version: 6.1.7601.2.00010100.1.0.004
    ID: {EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}(1)
    Is Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/A, hr = 0x80070002
    Signed By: N/A, hr = 0x80070002
    Product Name: Windows 7 Enterprise
    Architecture: 0x00000009
    Build lab: 7601.win7sp1_rtm.101119-1850
    TTS Error:
    Validation Diagnostic:
    Resolution Status: N/A
    Vista WgaER Data-->
    ThreatID(s): N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    Windows XP Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    File Exists: No
    Version: N/A, hr = 0x80070002
    WgaTray.exe Signed By: N/A, hr = 0x80070002
    WgaLogon.dll Signed By: N/A, hr = 0x80070002
    OGA Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    OGAExec.exe Signed By: N/A, hr = 0x80070002
    OGAAddin.dll Signed By: N/A, hr = 0x80070002
    OGA Data-->
    Office Status: 109 N/A
    OGA Version: N/A, 0x80070002
    Signed By: N/A, hr = 0x80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
    Browser Data-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default Browser: c:\Program Files (x86)\Internet Explorer\iexplore.exe
    Download signed ActiveX controls: Prompt
    Download unsigned ActiveX controls: Disabled
    Run ActiveX controls and plug-ins: Allowed
    Initialize and script ActiveX controls not marked as safe: Disabled
    Allow scripting of Internet Explorer Webbrowser control: Disabled
    Active scripting: Allowed
    Script ActiveX controls marked as safe for scripting: Allowed
    File Scan Data-->
    File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
    Other data-->
    Office Details: <GenuineResults><MachineData><UGUID>{EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-146-2397786-86942</PID><PIDType>6</PIDType><SID>S-1-5-21-4234423899-2489109333-1931045272</SID><SYSTEM><Manufacturer>System
    manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>1103</Version><SMBIOSVersion major="2" minor="7"/><Date>20120409000000.000000+000</Date></BIOS><HWID>CFBA3607018400F2</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific
    Standard Time(GMT-08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults> 
    Spsys.log Content: 0x80070002
    Licensing Data-->
    Software licensing service version: 6.1.7601.17514
    Name: Windows(R) 7, Enterprise edition
    Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
    Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
    Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 55041-00172-146-239778-03-1033-7601.0000-2252012
    Installation ID: 000792957432055771547065313840421702569731971164600080
    Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial Product Key: 8C7YB
    License Status: Licensed
    Remaining Windows rearm count: 5
    Trusted time: 8/12/2012 5:47:25 PM
    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: N/A
    HealthStatus: 0x0000000000000000
    Event Time Stamp: N/A
    ActiveX: Not Registered - 0x80040154
    Admin Service: Not Registered - 0x80040154
    HealthStatus Bitmask Output:
    HWID Data-->
    HWID Hash Current: OAAAAAEAAgABAAEAAgACAAAABAABAAEAHKJu3XDSdMRkx4ieoGkwung0ipvkrmTRDIsORc6qNCE=
    OEM Activation 1.0 Data-->
    N/A
    OEM Activation 2.0 Data-->
    BIOS valid for OA 2.0: yes, but no SLIC table
    Windows marker version: N/A
    OEMID and OEMTableID Consistent: N/A
    BIOS Information:
      ACPI Table Name           OEMID Value     OEMTableID Value
      APIC                                    ALASKA                               
    A M I
      FACP                                   ALASKA                               
    A M I
      HPET                                    ALASKA                               
    A M I
      MCFG                                 ALASKA                               
    OEMMCFG.
      SSDT                                    AMICPU                              
    PROC
    Scan Now Results
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Windows\system32>sfc /scannow
    Beginning system scan.  This process will take some time.
    Beginning verification phase of system scan.
    Verification 100% complete.
    Windows Resource Protection did not find any integrity violations.
    C:\Windows\system32>

    Thank you for your valuable time.
    I have performed the Chkdsk and the memory Diagnostic tool as per the suggestions.
    The Memory Tool did not find anything amiss.
    As per another thread I am going to try flashing the bios as well with the updates.
    Following are the Chkdsk results.
    Are there any other suggestions?
    Chkdsk Results
    Checking file system on C:
    The type of the file system is NTFS.
    A disk check has been scheduled.
    Windows will now check the disk.                        
    CHKDSK is verifying files (stage 1 of 5)...
      89600 file records processed.                               
              File verification completed.
      221 large file records processed.                                     
    0 bad file records processed.                                       
    1596 EA records processed.                                             
    44 reparse records processed.                                      
    CHKDSK is verifying indexes (stage 2 of 5)...
      131874 index entries processed.                                        
    Index verification completed.
      0 unindexed files scanned.                                           0
    unindexed files recovered.                                       CHKDSK
    is verifying security descriptors (stage 3 of 5)...
      89600 file SDs/SIDs processed.                                        
    Cleaning up 36 unused index entries from index $SII of file 0x9.
    Cleaning up 36 unused index entries from index $SDH of file 0x9.
    Cleaning up 36 unused security descriptors.
    Security descriptor verification completed.
      21138 data files processed.                                           
    CHKDSK is verifying Usn Journal...
      36120296 USN bytes processed.                                            
    Usn Journal verification completed.
    CHKDSK is verifying file data (stage 4 of 5)...
      89584 files processed.                                                
    File data verification completed.
    CHKDSK is verifying free space (stage 5 of 5)...
      476262075 free clusters processed.                                        
    Free space verification is complete.
    Windows has checked the file system and found no problems.
    1953410047 KB total disk space.
      48065140 KB in 61610 files.
         43468 KB in 21139 indexes.
             0 KB in bad sectors.
        253139 KB in use by the system.
         65536 KB occupied by the log file.
    1905048300 KB available on disk.
          4096 bytes in each allocation unit.
     488352511 total allocation units on disk.
     476262075 allocation units available on disk.
    Internal Info:
    00 5e 01 00 ef 42 01 00 ef 95 02 00 00 00 00 00  .^...B..........
    e3 00 00 00 2c 00 00 00 00 00 00 00 00 00 00 00  ....,...........
    6d 00 75 00 69 00 00 00 00 00 00 00 00 00 00 00  m.u.i...........
    Windows has finished checking your disk.
    Please wait while your computer restarts.

  • Multiple Errors with New iTunes

    Hi Folks,
    What's up with the most recent version of iTunes.
    1.  I'm trying to burn a CD (playlist) and iTunes is trying to analyze or "Determining the Audio Volume" for my podcasts.  It also says 225 and I don't have that many.
    2.  Print a cover for my CD.  It freezes when I want to change the print features.   Will not print, can't close window, etc.  I have to re-start my system.
    3.  My previous posting is for a missing iTunes Help -- nothing there.
    4.  If I'm burning a disc with iTunes I can't open an IE or Firefox Browser.  It complete jams my computer.
    What's up with this recent version.
    Do I need to complete uninstall again.   May be I should just go back to an older version since the newer versions have too many bugs or problems.
    Thanks, katy

    I should add that as of this morning iTunes appears to opening fine and reading my iPod (which is inexplicable because I haven't done anything with it since my 1st post.) iTunes still, however, will not save my library. I keep getting error message {-1450}. Also, every time i open iTunes, I am asked to agree to the user agreement, as if i had just downloaded the program.

  • SQL Server 2012 Management Studio Displays Error With "New Query" and Intellisense Works Intermittenly

    I was upgrade to SQL Server 2012 and Visual Studio 2010 was upgraded with SP1 the same day.  This is x64 machine. 
    Microsoft SQL Server Management Studio      11.0.2100.60
    Microsoft .NET Framework      4.0.30319.261
    Operating System      6.1.7601
    Problem 1) With SQL Server Management Studio, selecting "New Query" a warning box is displayed: "The 'Microsoft.Practices.EnterpriseLibrary.Configuration.Design.VisualStudioIntegration2010Package, Microsoft.Practices.EnterpriseLibrary.Configuration.Design.VisualStudioIntegration2010,
    Version=1.0.0.0, Culture=netutral, PublicKeyToken=null' package did not load correctly.    The problem mayhave been cuased by a configuration change or by the installation of another extension.  You can get more information by running the
    application together with the /log parameter on the command line, and then examining the file ...\AppDate\Roaming\Microsoft\AppEnv\10.0\ActivityLog.xml'.  Continue to show this error message?
    Problem 2) In a Query Initellisense works intermittently but most of the time it will not display anything.  I have tried Edit|Intellisense|Refresh Cach size and also seperately, Edit | Intellisense | List Members but neither has helped.  Also
    tried different selections for Tools|options| T-SQL | Intellisense| Maximum Script Size; no luck either. 

    Hi WallyJim,
    For your first problem, possible workaround:
    In Programs and Features (or Add/Remove Programs), right click the Microsoft Enterprise Library 5.0 Optional Update 1 program and select change. Remove the VisualStudio2010 integration.
    Then, install the EnterpriseLibrary Configuration extension from Microsoft via the Extension Manager in VS2010. This will allow you to launch the configuration editor from VS2010, but will not be installed for SSMS.
    For more information, please refer to
    https://connect.microsoft.com/SQLServer/feedback/details/620532/error-message-on-new-query-window-opening.
    For your second problem, the following conditions might affect the behavior of IntelliSense:
    There is a code error above the cursor.
    The insertion point is inside a code comment.
    The insertion point is inside a string literal.
    The automatic options are turned off.
    For more information, refer to Troubleshooting IntelliSense (SQL Server Management Studio):
    http://msdn.microsoft.com/en-us/library/ms173434.aspx.
    Thanks,
    Maggie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

  • Error with new Room Template (containing KM Navigation iView)

    Hello,
    I created a new room template based on a newly created workset which just contains the KM Navigation iView. As I went through the template wizard step by step (Content Administration > Collaboration Content > Room Template Administration) I didn't add any External Parameters (Step 3) and didn't add any extensions (Step 4). In the Mapping (Step 5) I mapped all internal parameter to "room_id" since I didn't know it any better. Then I created a room based on this template. When I entered the room I got the following error message. Is it possible that the following error has to do with the fact that I mapped all internal parameters to "room_id" and that I did not add any external parameters or any extensions?
    com.sap.portal.pcm.Title   
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : pcd:portal_content/com.sap.ip.collaboration/Rooms/20dcad45-aaaf-2910-3289-d797c9b4a1ae/workset/km_documents/kmnavigationiview
    Component Name : null
    Page could not create the iView.
    See the details for the exception ID in the log file
    Thanks a ton for our help!
    Katharina

    Hi,
    Maybe you can post this issue in the portal platform forum. This may get you more results.
    Rgds,
    Soujanya

  • Error with new function u00E9lement is not in use

    I designed quickly a new function in the backend with no input and only output which give me the url off the bsp server. (since there is nobody in the house who can make the iview bsp template)
    I select the function from find data and put it in the model which gives the output to a store. when I deploy I get an error 1.1
    element 'z retrieve http server' is not in use
    anybody any clue what to do ??
    kind regards
    arthur de smidt

    thanks for the help but I already find out what happenend. I had linked my function direct to a store but apperantly there is no trigger for the function to execute since it is on it's own without input needed. apparently I have to trigger it to implement it in a flow or something like that
    kind regards
    arthur

  • IOH temps higher after new CPU cooler on my X58 Pro

    Hi
    I have a X58 Pro with 12GB OCZ Platinum 1333 RAM + i7 920 + Antec EA500W. The stock cooler was making too much noise so I installed a new Thermaltake ISG 300 cooler. My IOH temps jumped from 57 to 82C on idle. I have an Antec Solo case which should have good airflow. Nothing else changed ....
    thanks
    -D

    I have seen other boards with similar big coolers (albeit from other companies like Zalman) but the IOH wasnt this hot. I will definitely try the Spotcool and see if that works. My goal was to simply get rid of the loud noise of the stock cooler.
    Quote from: Henry on 01-December-09, 11:35:59
    Looking at other manufacturers X58 boards those heat sinks don't appear to be much different so how is it that MSI is the only one you need to feel that way. You make a modification then you need to think about the other things that mod may have an effect on. There are other coolers that would have done the job without affecting designed airflow by much if any. If you change the designed airflow characteristics then you must compensate for that. In that case an Antec Spotcool would do it.

  • 50.5 Fuser Error with new fuser installed

    Our HP Color LazerJet CP6015 Printer stopped working because of a "50.5 Fuser Error". We ordering and installing a new Image Fuser Kit (220v) but it still shows the same error message. Anyone have any ideas how to fix the problem?

    Hi,
    You might have more luck on the bussines forum, this is the consumer forum and your unit is considered a bussiness unit, so the bussiness forum might be a place where you get a better answer.
    Find it with the link below.
    http://h30499.www3.hp.com/
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • HDCP error with new HDCP compliant monitor

    I just bought a new Asus VE228H monitor.  I have a ATI Radeon HD 4200, HDCP compliant video card and I am running Windows 7 and iTunes 12.1.1.4.  Even though the new monitor is HDCP compliant, I still get an HDCP error in iTunes.  I replaced the cable with a new HDMI cable and I still get the error.  I have tried searching online for a solution, but haven't found a solution.  Thanks in advance for your help.

    SUCCESS ....... for now ......!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    i have now got my atv2 unit to power back on - and we can play the rented SD movie which is playing now to a happy family....
    No HDCP error message appeared this time.
    This what we did to fix our issues....
    1) Pressed the HDMI cable more firmly into the HDMI port into TV - this allowed the ATV2 to actually show/reappear onto the tv panel.
    2) Plugged both power leads for TV and ATV DIRECTLY into wall. (Previously, we had both AC leads plugged into a 4x multi power board and had this plugged into the wall.
    We started the SD movie and no HDCP error appeared and movie is still playing as i type...
    Now, to repeat this error/diagnostic, we then plugged the TV power lead back into the 4 x multi power board and plugged the board back into the wall. Immediately, the dreaded HDCP error re-appeared. We then replugged TV back into wall directly and no HDCP error message.
    Hypothesis #1 :
    Now, this 4 x multi power board also had our DVD player and stereo connected to it. Perhaps our DVD (potential recording device) was being detected and hence the HDCP barrier came up so that we were not able to record this movie.... just a hunch but sounds plausible.....
    Hypothesis #2 :
    Also, this 4 x multi power board was within immediate vacinity of the ATV2 unit. Possible interference.....
    When the 'dust' settles and the family finishes watching the movies, (1 x HD , 1 x SD), i will plug the 4 x multi power board into another AC wall socket way out of the way of the ATV2 unit (around 4m) and try to repeat this error to validate my hypotheses - noted above.
    I will report findings later in around 6 hours...
    thanks for your help people...

Maybe you are looking for