Error with new function u00E9lement is not in use

I designed quickly a new function in the backend with no input and only output which give me the url off the bsp server. (since there is nobody in the house who can make the iview bsp template)
I select the function from find data and put it in the model which gives the output to a store. when I deploy I get an error 1.1
element 'z retrieve http server' is not in use
anybody any clue what to do ??
kind regards
arthur de smidt

thanks for the help but I already find out what happenend. I had linked my function direct to a store but apperantly there is no trigger for the function to execute since it is on it's own without input needed. apparently I have to trigger it to implement it in a flow or something like that
kind regards
arthur

Similar Messages

Recently bought a new computer and all my music appears in iTunes as well as on my computer in a saved folder. When I try to play the music in iTunes I get an error that reads"the song could not be used because the original file could not be found."

Recently bought a new computer and all my music appears in iTunes as well as on my computer in a saved folder. When I try to play the music in iTunes I get an error that reads"the song could not be used because the original file could not be found. Would you like to locate it?" Hope you can help me solve this issue.
Thanks,
Shellyboo

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

I have a new computer that downloaded all of my playlist. but i cannot play all songs. i get a error that say "the song could not be used because the original file could not be found. would you like to locate it? but it does not help to resolve.

i installed itunes to my new computer and transfered all my playlist from the older computer. the software came with the new computer hp link up. the problem
comes in where i want to play a certain song on a playlist and this error pops up "the song could not be used because the original file could not be found.
would you like to locate it? which is of no help.
is there a solution to this problem?

The file path for these songs IS NOT correct per your iTunes Library file.
See: http://dougscripts.com/itunes/scripts/ss.php?sp=listmias for an Applescript to locate these files for re-adding.

Error with new Package

I am trying to retrieve a variable from an .as file from one mxml file, while setting it from another. I thought I had everything set up, but I am retrieving an error. 1119: Access of possibly undefined property loc through a reference with static type Class. I'm assuming I am missing something, but can't figure out what it is.
Any help is greatly appreciated.
This is how the value is set within the mxml
PickLocation.loc = cboPreviousLocations.value.toString();
I have imported the package.
import   widgets.PickLocation;
The .as file
package
Bindable]
public class PickLocation{
public var _loc:String;
public function get loc():String {
return _loc;}
public function set loc(value:String):void { widgets{
_loc = value;

Here is what I have and the error I am receiving.
Error 1042: The this keyword can not be used in static methods. It can only be used in instance methods, function closures, and global code.
package
Bindable]
public class PickLocation{
static public var _loc:String;
static public function get loc():String {
return _loc;}
static public function set loc(value:String):void {   *****This is where the error is occurring._loc = value;    }
I'm not following why I'm receiving the error considering I'm not using the this keyword anywhere.

I am unable to burn any info-photo ect on to a disk. I have a 27" I mac mid 2010 version. I put in a disk, hit burn, it runs for about 3 mins and ejects the disk sayiny there was an error with the drive and will not restart.

am unable to burn any info-photo ect on to a disk. I have a 27" I mac mid 2010 version. I put in a disk, hit burn, it runs for about 3 mins and ejects the disk sayiny there was an error with the drive and will not restart.

The optical drive has probably failed. It's a fairly common thing with these slim SuperDrives. Does it read any discs you put into it? You can try resetting the SMC and pram but I'll be surprised if it helps.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on
Resetting PRAM and NVRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Just bought pro with new os installed - will not let me run install disk for lexmark printer

just bought pro with new os installed - will not let me run install disk for lexmark printer?

Is that disc for Mac systems or Windows ?
I suggest you visit Lexmark web site and download and install drivers for your exact printer manually.

On some of my files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?" Then when I click "Locate", I get nothing.

I'm really dumbfounded on this one and it's driving me bonkers!!!! On some of my music files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
This began to happen when Chuck made playlists2burn on2CD-and then he would delete the playlist; sending all the song files into oblivion. Certain songs have a ! right next to the file name, and as I stated before, i get that error message:
"The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
So I click on "Locate". No help. I get a menu with folders that say "catroot" and other folders which names I cannot remember, but I scroll PAST the file folders, & it's just a bunch of ".DLL" files.....I don't understand what any of the names of the folders mean...it's frustr8ing-coz this is my 2nd iTouch, my 1st one got stolen & I can't afford2buy my music back at this time & i NEVER before had a single problem with losing song file locations.
              Is there anyone out there who has been through this frustrating game of chasing your tail?....<that's how I feel>
If so I would be ever so gr8ful if maybe someone with the knowledge would be so kind as 2 tell me how/where 2 retrieve these songs & how to put everything back where it belongs, I would be 4ever gr8ful !!!
I can't afford 2 replace the songs just like I'm unable 2 buy back my old music from my stolen iTouch....man that was an awesome collection-someday I'll be able 2 afford 2 do that & I would like 2 have all the new music that I paid 4 but cannot find when I got my new iTouch....that would just be wonderful.
             I hope someone sees this post that can help me retrieve these files....losing $100.00 of iTunes is a REAL BUMMER!!!!!!
                                                  ThanQ SO very much!
                                                                         [email protected] or [email protected] or [email protected] .
                                                                                           You can also find me on Facebook, my given name is Tiffinie Trimmer, &
                                                                                            that's my Facebook "handle". ThanQ 4 taking the time 2 read all of this!
                                                                                            hope 2 get a reply someday....I'll B checking all my emails & my Facebook, as well
                                                                                            as marking this page in my FAVORITES so I can find it fast! Take Care!!!

I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

Function 'myfunc' may not be used in SQL Options

<p>
Hello,
I have created a simple function in a packege for use in an update statement. The function is
FUNCTION myfnc(p1 IN t1.c1%TYPE)
RETURN VARCHAR2
IS
BEGIN
IF p1 = 3 THEN
RETURN 'A';
ELSE
RETURN 'B';
END IF;
END myfnc;
I use it in a procedure which exists in the same package as the function as follows
Update t1
set c1 = myfnc(c2);
I am getting the compliation error Function 'myfunc' may not be used in SQL.
There is no db manipulation going on and I have tried using
PRAGMA RESTRICT_REFERENCES (myfnc, WNDS, WNPS, RNDS, RNPS);
but to no avail.
One other thing is that I thought this was compiling OK but then I decided to put the function in the package specification so I could unit test it using a db call. Now if I drop and recreate the package without the declaration in the specification the compile error still occurs. Perhaps that's my mind playing tricks but maybe there is something here I am not aware of.
Any suggestions?
</p>

Hi,
You found the solution.
Although it's allowed to say
Update     t1
set     c1 = local_var;in a package, where local_var is not defined outside of the procedure, let alone the package, and
although it's legal to say:
local_var = myfnc (some_other_var); inside the package where myfnc is a private function (included in the package body, but not in the package header), still
it is not legal to say:
Update     t1
set     c1 = myfnc (c2); If there is a problem with putting myfnc in the package header (for example, you don't want people calling it directly, for some reason), you can make it a stand-alone function, like Someoneelse did, or put in a different package, and give the owner of your first package (and no one else) EXECUTE privileges on it.
As William pointed out, if myfnc is really this simple, you might not need a function at all.

Function name_function may not be used in SQL

Dear forums,
when i compiled my form that contain the function package, i got the error "Function <name_function> may not be used in SQL". But when i execute the function from sql plus, it works smoothly.
What's the solution ?
with great thanks,

Hi Salim,
as far as I understand you you try to use a function that is stored in the form. The select statement is worked on the database where your function is not known. You have to create this function on the database as you did it for using in SQLPlus.
Regards,
Werner

See my error : (REP-1272: Column CF_1 may not be used as break Column.)

Hi master
Sir I have master detail report and I use one formula column and one place holder column in my report in master section
I use this code
function CF_1Formula return Date is
begin
if :chqdate is not null then
     :cp_1 :=:chqdate;
else
     :cp_1 :=:sdate;
     end if;
end;
Sir when I run my report then system give me this error
REP-1272: Column CF_1 may not be used as break Column.
Please give me idea how I get report
Thank
aamir

Hello,
Break Order cannot be used for some Column Type :
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwcontxt/props/pi_col_break_order.htm
(CLOB is not explicitly specified, but the restriction for LONG and LONG RAW exists for CLOB too)
Regards

Error: "the song...could not be used because the original file not found"?

Has anyone seen and resolved the issue from this error: "The song...could not be used because the original file could not be found"?
Thank you for your help

Yes, with no luck ... But I'm not exactly a computer tech. I searched with spotlight with no results.

Error adding new function in order template

Hi,
When i am trying to add a new function to order Template under /contolData/Functions/ form data dictonary
I am getting error :
Element with same name exist.The following nodes can not be added to the order.
(no namespace):/ControlData/Functions/MyNewFunction
(no namespace):/ControlData/Functions/MyNewFunction/componentKey
Thanks
Harman

Hi Harman,
You might need to be more specific before I can help you. What have you done, and which step you run into the error? I supopse you have created a new "function" Order Component, and created the required Control Data nodes in Data Dictionary (what have you added?), right? So, when you go into the Order Template tab of the new Order Component (which would be empty since it was newly created), and you try to "select from Dictionary" the corresponding ControlData for the function (e.g. /ControlData/Functions/MyNewFunction), that such an error occurs?
Have you assigned a process for this Order Component? Studio does not allow adding control data to it unless a process is assigned.
Btw, you should define a namespace for your Order Components (and other orchestration entities). The OSM server uses namespace to locate these entities among cartridges.
Cheers,
Daniel Ho
Product Management -- OSM

Error with getAttribute( ) function, while navigating from parent to child

Hi,
I have been trying to develop a small project with two task flow(TF).
Both the TF contains only one page.
Both of my pages are made from different VO,s.
from the Parent page (P1) if i select a row and navigate to Child Page (P2), i need to filter the result in P2 using the selected row in P1.
From P1 when i selected a row and navigate to P2 by clicking a button, i have used a Bean to get the parameters from the selected row and Passed the same to TF2.
I made an AMImpl method and binded it to P2, such that whenever my P2 render this AMImpl method will be executed.
Inside the AMImpl method i am trying to run the VO query of P2 with new selected criteria from TF1 ie.P1.
i also have few more functionalites in P2 like when i select a row and clicks on a button i will some some info on a pop-up for the corresponding selected row.
When i run the page P2 individually,all works fine. But when i navigate from P1 to P2 none of the functions are working, i.e when i click on the button on P2 to see popup its showing that Attribute is Null in the selected row, even though the attribute is not null. After navigation in P2 this function getAttribute( ) is returning null. but when i run P2 individually the same function is returning all required fields without error.
Actual AMimpl.java method code :
RowKeySet selectedRows =
Table.getSelectedRowKeys(); //Table is a "Rich Table" i declared outside the method and binded to my actual table on P2
Iterator selectedRowsIterator =
selectedRows.iterator();
DCBindingContainer dc =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding iterBinding =
dc.findIteratorBinding("P2Iterator");
RowSetIterator rowSetIterator = iterBinding.getRowSetIterator();
Key selectedRowkey =
(Key)((List)(selectedRowsIterator.next())).get(0);
Row selectedRow = rowSetIterator.getRow(selectedRowkey);
String parameter1ForCurrentRow =
selectedRow.getAttribute("parameter1").toString(); // -->this particular line is returning null while navigating from P1 to P2, but the same line returns actual value if the run P2 individually
Kindly guide me how to achieve this.
Regards
Siva

Hi Timo
thanks for your reply.
The reason I am doing this is to avoid the numerous instances of VO2 (Child VO) that will get created for every row of VO1. (eg: 100 rows of Vo1 means 100 instances of VO2 created & executed ).
I am trying to avoid that by Binding and executing the params to a single child VO instance, only on the click of a button.
Please advise if my assumption about as many child instances of VO2 being created and executed is incorrect and ADFBC does some kind of Lazy instantiation / loading of the child VO until the point of execution of the UI code where it is bound to ?

Still getting Javascript error with new version of UIX

I'm facing some problem after changing my UIX framework version (2.2.3030829.1626).
Currently I'm using UIX version (2.2.3030829.1626) . Paging with table is not working with new frame work .
It is giving me javacript error "object doesn't support property or method" when clicking 'Next' .
It's working fine with old version.
We had used proper cabo directory. These files are in sync with the version of the runtime
Here is our finding
I found a error in _updateFormActions() function from MarlinCoreb2.js file.
In this function it is giving error at
if(a8!=a6)
a7.action=a6 line (line # 1841,1842). If I comment out this two lines page is
working properly without any javascript error.
This problem is a bit tricky....
Because it seems to be a problem with the UIX framework that only occurs on some versions of the Internet Explorer. On some version (IE 6.0.2600.0000) it works fine
and it also works on the Mozilla Firefox browser.
Can any one advice on the same?
Thanks in advance
Anindya

I answered this question on a different thread.
Do NOT post the same question multiple times. If you require more complete or prompt assistance than you receive on these forums, contact Oracle Support.
-brian

Javascript error with new UIX framework

Hi,
I'm facing some problem after changing my UIX framework version (2.2.3030829.1626).
Currently I'm using UIX version (2.2.3030829.1626) . Paging with table is not working with new frame work .
It is giving me javacript error "object doesn't support property or method" when clicking 'Next' .
It's working fine with old version.
Any help is much appreciated.
Thanks and Regards,
Anindya

Thanks Brian for your prompt reply
We had used proper cabo directory. To confirm it we have done it once again.But we're still getting the same error.
here is our finding
I found a error in _updateFormActions() function from MarlinCoreb2.js file.
In this function it is giving error at
if(a8!=a6)
a7.action=a6 line (line # 1841,1842). If I comment out this two lines page is
working properly without any javascript error.
This problem is a bit tricky....
Because it seems to be a problem with the UIX framework that only occurs on some versions of the Internet Explorer. On some version (IE 6.0.2600.0000) it works fine
and it also works on the Mozilla Firefox browser.
can you please advice is there any solution
Thanks in advance
Anindya

Error with new function u00E9lement is not in use

Similar Messages

Maybe you are looking for