Error with Nokia Configuration Tool with a E71.

Hi everyone, when using Nokia configuration tool, I tried many times to send a profile saved with a E71 to another E71 but each time I try I get the same error message. When trying to copy the PKI / Certificates group , the soft says  "error 500 unexpected condition that prevented to request being fulfilled" ; the others groups work fine. I'm used to do this with the E51 and I've never encountered this problem. I have to program a lot of phones so it would be much easier for me if this method works.
Thank you for your help.

Hi Gabor,
If the issue is still alive, please try to connect your N97 device after launching the Nokia Configuration Tool, NCT should detect your N97 device and if there are no profiles created for N97 device, It will prompt you to create a new profile.
I dont see any issue in identifying the N97 device with NCT 6.0.
Please let me know if it does not help.
Thanks & Regards,
Raghava Reddy K

Similar Messages

  • Issues with nokia configuration tool 5.0 - E72

    I wanted to install a new profile and save the old one for a few people.
    Since typing on the PC is much easier, I hoped I could use the configuration tool
    After reading the data it lost contact and couldn't find my phone again.
    A new try after running PC-Suite 7.1 first:
    it finds my phone (with latest firmware) but cannot import / read any data
    Any ideas?
    By the way: the change language options doesn't work (only English has been installed)

    Hi,
    I am experiencing similar issue: from PC Suite v 7.1.40.6 I can see the Nokia E72-1 mobile phone, from the Nokia Configuration Tool v 5 I can also see the Nokia E72-1 but from the Configuration Tool I cannot Edit Online the mobile phone and I cannot push a configuration either. This is weird !
    Also, wether the phone is connected through USB or Bluettooht, I get the same results.
    Anyone has an idea why this happens and how to solve the situation ?
    Regards,
    Bluea.

  • Need connectivity of SAP Oracle with Third Party tool with dsn

    Hi Friends,
    We need to access SAP's Oracle database with third party tool with the help of dsn creation. For that we need to create 2 staging tables and need a new segment for these tables. Our data will move from SAP transactions to these 2 tables and we want to fetch this data via dsn into another third party S/W.
    I am unaware of such kind of working, can you please help me how to create new segment and how to create dsn for accessing tables in this segment.
    Our requirement is as follow.
    The staging tables are required in the SAP database with user name and password. The user should have all access to the staging table only.
    Requesting your kind help on this issue. Please suggest for further processing of activity.
    Rgds, Krishan Raheja.

    Hi,
    Common way to integrate SAP (database) with third party Application is to use and implement SAP Connector (Java or .Net).
    Using this, you can fetch the data from SAP database to use it in Third party application.
    As per my understanding the method you mentioned, will void the SAP database license term.
    So Please check before doing such configuraiton. Also that method is NOT recommended..
    Regards.
    Rajesh Narkhede

  • Nokia Configuration Tool and E70 with new firmware...

    After the firmware update with NSU an interesting problem appeared - every attempt to import or load the profile from the phone to application fails with error message stating that the connection was lost. No difference whether to use USB or bluetooth connection. Because all was fine before the update, the alleged Nokia statement about the USB port problems on many computers (found on some S60-related blog) cannot be taken seriously.
    It seems like the Configuration Tool is now also needing some update for compatibility with 3.06330.09.04 firmware
    P.S. However the program is not completely unusable - I managed to load the e-mail and SIP server settings to the phone without problems.
    388 -> 688 -> 6150 -> 6310 -> 6310i+1100+ E70-1(3.0633.09.04/crippled VoIP)

    ...have to take back this P.S. on previous message - too bad there's no way to edit the thread openings (replies are editable however)
    388 -> 688 -> 6150 -> 6310 -> 6310i+1100+ E70-1(3.0633.09.04/crippled VoIP)

  • Error installation when configure OAM with FORMS 11Gr2 (SSO)

    Hi
    I try configure SSO with Forms 11gR2 (windows 2008).
    1. Install RCU 11.1.1.5.0
    2. Install and configure OID (ofm_idm_win_11.1.1.2 & patch ofm_idm_win_11.1.1.5)
    3. Install OAM (ofm_iam_generic_11.1.1.5 & Patch 11.1.1.5.3 (13473393))
    4. Integrate OAM & OID - After that i can logon to my oamconsole using OID (LDAP) identifier
    5. Try install Forms 11gr2 ( ofm_frmrpts_win_11.1.2.0.0_64)
    During installation, i complete information about my OID, then i put connect information to OAM and i get error.
    OAMAdminServer - console
    <2012-07-17 08:44:32 CEST> <Error> <oracle.oam.engine.remotereg> <OAM-30046> <agent validate mode failed. Agent does not exist. >
    InstallLog
    Welcome to OAM Remote Registration Tool!
    Parameters passed to the registration tool are:
    Mode: agentvalidate
    Agent name: 120717084429_RREG_OSSO_VALIDATE
    Enter your server address (http(s)://FQDN:port):Server Address: http://weblogic:7002
    Enter admin username:Username: weblogic
    Enter admin password: Enter admin password:Your validate request is being sent to the Admin server at: http://weblogic:7002
    2012-07-17 08:44:33 oracle.security.am.engines.rreg.common.XMLValidationEventHandler handleEvent
    SEVERE: Error occurred while parsing the XML file.Error message is: cvc-complex-type.2.4.d: Invalid content was found starting with element 'managedServerUrl'. No child element is expected at this point.
    At Column:421
    and At line number: 1
    Error message is: cvc-complex-type.2.4.d: Invalid content was found starting with element 'managedServerUrl'. No child element is expected at this point.
    At Column:421
    and At line number: 1
    The remote registration process did not succeed! Please find the specific error message below.
    Error in unmarshal2012-07-17 08:44:34 oracle.security.am.engines.rreg.common.RequestResponseParser parseFromXMLString
    SEVERE: Exception encountered: RemoteAgentRegistrationException. Specific exception:JAXBException.nulljavax.xml.bind.UnmarshalException
    - with linked exception:
    [org.xml.sax.SAXParseException: cvc-complex-type.2.4.d: Invalid content was found starting with element 'managedServerUrl'. No child element is expected at this point.]
    2012-07-17 08:44:34 oracle.security.am.engines.rreg.client.RegClient main
    SEVERE: Exception encountered: RemoteAgentRegistrationException. Specific exception:Error in unmarshalling operation! Please try again.oracle.security.am.engines.rreg.common.RemoteAgentRegistrationException: Error in unmarshalling operation! Please try again.
    ling operation! Please try again.
    resultset.getStatus() : false
    Thanks in advice.
    Oscar

    Hi,
    This is a bug with OAM 11.1.1.5.x
    The fix is to use OAM 11.1.2.x and you should be able to configure FR 11.1.2.x and connect to OID and OAM.
    Regards,
    noveaux_life

  • Error starting the Config Tool with NW04s Sneak Preview

    All...
    I am running the Java NW04s Sneak Preview (SP9).
    When I try to start the config tool, I get the following error on the dos session
    <b>The system cannot find the path specified.
    Program terminated abnormally
    Press any key to continue...</b>
    I realize that this is probably a very simple problem to fix... so can anyone tell me how?
    Also... when I log on to the Visual Administrator or the NetWeaver Administrator, I cannot edit any parameters.  I have tried logging in as "Administrator" and as "admin".  Is the Sneak Preview locked out, or am I doing something wrong?
    Regards

    Srikishan --
    I did check the bat file, and it says:
    %JAVA_CMD% -Dsun.java2d.noddraw=true -Duser.language=en -classpath .\lib\launcher.jar;. com.sap.engine.offline.OfflineToolStart com.sap.engine.configtool.visual.ConfigTool ./lib/
    where JAVA_CMD should equal %JAVA_HOME%\bin\java.
    I have JAVA_HOME set in my environment variables.
    I did a "set" command in DOS to check, and it is there.
    The properties file in its entirety says:
    #Generated by Config Tool
    #Sat Nov 18 15:33:41 CST 2006
    rdbms.maximum_connections=5
    system.name=J2E
    secstorefs.keyfile=
    DALTFC-HEILEE
    sapmnt
    J2E
    SYS
    global
    security
    data
    SecStore.key
    secstorefs.secfile=
    DALTFC-HEILEE
    sapmnt
    J2E
    SYS
    global
    security
    data
    SecStore.properties
    secstorefs.lib=
    DALTFC-HEILEE
    sapmnt
    J2E
    SYS
    global
    security
    lib
    rdbms.driverLocation=C\:
    sapdb
    programs
    runtime
    jar
    sapdbc.jar
    rdbms.connection=jdbc/pool/J2E
    rdbms.initial_connections=1
    Honestly, I can't tell you anything about this file.
    The file C\:
    sapdb
    programs
    runtime
    jar
    sapdbc.jar does exist.
    Any other ideas?

  • How can I go back to the prior version? I'm having trouble with an IBM tool with the latest version.

    How do I go back to the version prior to this one?

    You can download Firefox 3.6 by [http://www.mozilla.com/en-US/firefox/all.html clicking here.]

  • ASR netflow with third party tool

    Hi ,
    we have one issues where netflow data is not getting into the solar winds tool.in wireshark captures it shows netflow traffic is reaching upto the server.
    found one  forums and they highlighted one bug as below but its not affecting the release we are having.unable to find the exact bug ID in cisco .let me know if you can get any inputs and highlight the same.
    below is the links and current details
    https://thwack.solarwinds.com/thread/32146
    current ASR version & related netflow config is attached.diesnt find any issue with the configuration .trying with another vendor tool as well and will check .
    asr1002x-universal.03.10.01.S.153-3.S1-ext.SPA.bin
    show  ip flow export cache flow  
    IP packet size distribution (1317M total packets):
       1-32   64   96  128  160  192  224  256  288  320  352  384  416  448  480
       .000 .040 .023 .006 .004 .004 .030 .004 .002 .005 .004 .006 .002 .001 .000
        512  544  576 1024 1536 2048 2560 3072 3584 4096 4608
       .000 .000 .047 .029 .781 .000 .000 .000 .000 .000 .000
    IP Flow Switching Cache, 0 bytes
      0 active, 0 inactive, 24710853 added
      417778 ager polls, 0 flow alloc failures
      Active flows timeout in 30 minutes
      Inactive flows timeout in 15 seconds
      last clearing of statistics never
    Protocol         Total    Flows   Packets Bytes  Packets Active(Sec) Idle(Sec)
    --------         Flows     /Sec     /Flow  /Pkt     /Sec     /Flow     /Flow
    TCP-Telnet           5      0.0        61    42      0.0      31.1      31.2
    TCP-FTP             52      0.0        20    85      0.0      14.3      30.9
    TCP-FTPD             8      0.0        71    51      0.0       3.6      31.1
    TCP-WWW         369465      0.0        15   694      1.3       7.2      30.9
    TCP-SMTP           417      0.0        84    98      0.0       5.8      30.9
    TCP-X                3      0.0         7   277      0.0       1.6      31.1
    TCP-BGP          10911      0.0         1    69      0.0       3.0      30.9
    TCP-other     19793896      4.6        28  1134    131.5       2.6      30.9
    UDP-DNS         320124      0.0         1    79      0.0       0.0      30.9
    UDP-NTP          65307      0.0         1    87      0.0       0.1      30.9
    UDP-TFTP           854      0.0         1    51      0.0       0.0      30.9
    UDP-Frag          1721      0.0         7    58      0.0       2.1      30.9
    UDP-other      3850147      0.8       192  1244    172.6       3.7      30.9
    ICMP            296732      0.0         3    62      0.2       4.2      30.9
    Total:        24709642      5.7        53  1193    305.8       2.8      30.9
    SrcIf         SrcIPaddress    DstIf         DstIPaddress    Pr SrcP DstP  Pkts

    HI Mike,
    If you have third party Document Management System, then you can post two different message, i.e. service order in transaction details of the third party tool with link to document which would be posted to third party Document management server.
    If you don't have third party document management system and what to use sap infrastructure, then you don't need to maintain attachment, maintain the link between the third party tool and SAP document repository, with some login utilities.
    Best Regards,
    Pratik Patel.
    Reward with points if it is of any help to you!

  • Nokia Car Mode with mirrorlink - can't buy or inst...

    Hi there.
    I have a problem with Nokia Car Mode with mirrorlink app.
    I can't buy it! 
    I'm using the Nokia 808 FP2 and the Car Mode comes preinstalled but every time I want to buy the mirrorlink app it just says that I can launch it, and when I click it it just opens the ordinary Car Mode app!
    I've bough a Alpine ICS-X8 just so that I can use my phone with this radio, and now I can't even buy it! -.-
    Please fiy that as soon as you can, couse I see that I'm not the only onw ith the problem...
    Solved!
    Go to Solution.

    Hi.
    Here my solution.
    At the end, the only way for me to install Mirrorlink in my Nokia 700 with FP2 as I don't have another phone with FP1 was to install a custom rom with car mode removed and then buy the Mirrorlink app in the Nokia store from the phone. 
    As the car mode is not installed there´s no problem in buying, downloading and installing the Mirrorlink app.
    Then you install the official firmware back if you don´t like the custom, and go back to Nokia store and there's no problem now updating to Mirrorlink.
    As I didn't find a custom rom without car mode I did one myself.
    It's not too complicated to do one for yourself, in my case I took the Delight custom rom for the Nokia 700 (if you use it just donate to the author), then with Nokia Cooker program (if you use it just donate to the author) edit it looking in rofsx2, rofsx3 and core for any file with "carmode" and remove it.
    Then you compile it, save the modified rom and flash it into your Nokia and thats all.
    The first time you turn on your phone will appear an error but its because the system expects to find the carmode app and it's not installed (you need more knowledge of symbian programming to avoid that) but as soon as you install mirrorlink the error dissapear.
    If you find this useful please le me know saying something in the forum.

  • Nokia Car Mode with Mirrorlink

    According to several other discussion threads, download issues with Nokia Car Mode with Mirrorlink for Belle FP2 devices are still not solved.
    At this time (tried on a Symbian Belle FP2 device) the Mirrorlink app in Nokia Store (http://store.ovi.com/content/268973) shows itself as "installed" and cannot be purchased and downloaded (because of the firmware integrated free Nokia Car Mode app in FP2).
    Do you know any safe solution how to purchase / download this app?
    (solutions mentioned in other threads: using an other Belle FP1 phone for purchasing and then transferring the downloaded install package, etc...)
    Géza

    well I didn't have any friends with nokia/symbian^3 devices so I had to try the delight cfw / nokia cooker method posted here somewhere (can't find the exact post again), anyway, i did that, i was able to buy the app from store, and then I switched back to oficial belle fp2 firmware and I was able to update the existing non MirrorLink app to the paid one.
    And finally after a good week of forums and stuff I got to use my phone with my alpine headunit, was so happy and then disaster... the music player in belle fp2 has that album art view in landscape mode, and as far as the phone is connected to the head unit is always in landscape mode, I find it pretty hard to search music that way, especially with my music library which is... well bad organized, most songs are in unknown artist / album... do you guys know any music player for belle fp2 with a winamp like functionallity - to be able to sort playlist by path(folder name) and file name, and does not base on any id3 tag from songs?

  • Connect with nokia ovi suite willuse my phone batt...

    my nokia 5233 connect with nokia ovi suite with full battery it just can use like 15 hour then my battery is finish
    i m using USB cable to connect , is this normal?
    if i want always connect to my computer any batter way for me to use?

    kelkel85 wrote:
    I m spinal cord injury person , for me computer is more easy to use then a phone
    soi connect my phone all the time so that i can sms easily
    another question, wat is the cheapest way to may my phone speaker louder?coz i open max volume is still not enough
    Sorry to know about this... BTW pavilion_alex has already answered your other query...

  • E5 and Configuration tool

    Hi,
    Does anyone have information on E5 and Nokia Configuration tool. It's not on the list of supported devices. This seems a bit odd, because it is an E-series machine. Any news on this would be appreciated
    thanks

    I did a connection test and the results are succesful
    Test Details:
    The test consists of the following steps:
    1. Checks the validity of system ID in the system object.
    2. Checks if the system can be retrieved from the PCD.
    3. Check whether a SAP system is defined in the system object
    4. Validate the following parameters: WAS protocol; WAS host name
    5. Checks if the host name of the server can be resolved.
    6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
    7. Checks HTTP/S connectivity to the defined back-end application
    Results
    1. The system ID is valid
    2. The system was retrieved.
    3. The system object represents an SAP system
    4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (mnxksrv056.digital.com:8100)
    5. The host name mnxksrv056.digital.com was resolved successfully.
    6. The Web AS ping service http://mnxksrv056.digital.com:8100/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
    7. An HTTP/S connection to http://mnxksrv056.digital.com:8100/sap/bw/BEx/ was obtained successfully.
    I` am still puzzled where its picking up that hostname and the coming up with an error
    Any ideas are welcome

  • OCS 2007 R2 Response Group Configuration Tool Failure

    Hello there.
    We are bringing back to life an old OCS installation. Customer performed a clean AD reinstall and we are in the process of re-installing OCS 2007 R2. All seems to work fine, except the RGS. When accessing the web tool we get this error:
    Response Group Configuration Tool Failure
    An unknown error occurred. The operation cannot complete successfully. Please contact the administrator if this problem persists.
    Click here to return Home.
    the Event viewer for application on the FE shows:
    Event code: 3005 
    Event message: Excepción no controlada. 
    Event time: 13/05/2014 12:13:01 p.m. 
    Event time (UTC): 13/05/2014 06:13:01 p.m. 
    Event ID: a74ea242095f4e8099bca266a7a5cc83 
    Event sequence: 8 
    Event occurrence: 1 
    Event detail code: 0 
    Application information: 
        Application domain: /LM/W3SVC/1/ROOT/Rgs-1-130444779241580315 
        Trust level: Full 
        Application Virtual Path: /Rgs 
        Application Path: C:\Program Files\Microsoft Office Communications Server 2007 R2\Web Components\Acd Files\ 
        Machine name: OCSR2-FE02 
    Process information: 
        Process ID: 6504 
        Process name: w3wp.exe 
        Account name: domain\RTCComponentService 
    Exception information: 
        Exception type: COMException 
        Exception message:  
    Request information: 
        Request URL: https://ocspool.domain.com:443/Rgs/Deploy/Default.aspx 
        Request path: /Rgs/Deploy/Default.aspx 
        User host address: 172.16.6.32 
        User: domain\user
        Is authenticated: True 
        Authentication Type: Negotiate 
        Thread account name: domain\RTCComponentService 
    Thread information: 
        Thread ID: 9 
        Thread account name: domain\RTCComponentService 
        Is impersonating: False 
        Stack trace:    en System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
       en System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
       en System.Management.ManagementObjectCollection.get_Count()
       en Microsoft.Rtc.Acd.Management.OcsApplicationContactSetting.Select(String condition)
       en Microsoft.Rtc.Acd.Web.UI.WorkflowTemplate.GetContactObject()
       en Microsoft.Rtc.Acd.Web.UI.WorkflowTemplate.AddedControl(Control control, Int32 index)
       en ASP.deploy_default_aspx.__BuildControl__control15(Control __ctrl)
       en Microsoft.Rtc.Acd.Web.UI.TemplateHelper.InstantiateWorkflowTemplate(AcdWorkflow workflow, ITemplate template, ControlCollection controlsToAddTo, String resourceClass, String templateResourcePrefix)
       en Microsoft.Rtc.Acd.Web.UI.AcdWorkflowList.CreateChildControls()
       en System.Web.UI.Control.EnsureChildControls()
       en System.Web.UI.Control.PreRenderRecursiveInternal()
       en System.Web.UI.Control.PreRenderRecursiveInternal()
       en System.Web.UI.Control.PreRenderRecursiveInternal()
       en System.Web.UI.Control.PreRenderRecursiveInternal()
       en System.Web.UI.Control.PreRenderRecursiveInternal()
       en System.Web.UI.Control.PreRenderRecursiveInternal()
       en System.Web.UI.Control.PreRenderRecursiveInternal()
       en System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    Custom event details: 
    on the OCS logs I have:
    Unhandled exception occurred in the Response Group Service Configuration Tool. The operation could not complete successfully.
    Requested URL: /Rgs/Deploy/Default.aspx
    User / Host making the Request: domain\user/ 172.16.6.32
    Unhandled exception: System.Web.HttpUnhandledException - Se produjo una excepción de tipo 'System.Web.HttpUnhandledException'.
    Inner Exception: System.Runtime.InteropServices.COMException
    Cause: An unhandled exception occurred.
    Resolution:
    Check the exception.
    Windows server is installed in spanish, if you wonder why the mix in languages.
    We have been battling with this error for the last 2 weeks. Any help is greatly appreciated!
    FR

    Hi,
    Please check the configuration of the Response Group Service with the help of the link below:
    http://technet.microsoft.com/en-us/library/dd441277(v=office.13).aspx
    Please check the OCS components that are required to implement the Response Group Service below:
    Application Server and Response Group Service
    Language pack
    Administrative tools
    Web Components Server
    Internet Information Services
    Microsoft Office Communicator 2007 R2
    You can try to use the workflows that you crated to validate the deployment.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Configuration tool problem

    Hi,
    I tried to use Configuration Tool for VPN. When I open a *.vpn file the program says:
    Impossible to reach temp folder.
    I'm using Win7.
    Can you help me, please?
    Thanks

    Hey serenc2, Welcome to the Nokia Forums!
    Have you tried viewing this link which can help you to configure your VPN on Configuration Tool? 
    You can also try do the following steps to fix the problem:
    Disconnect the USB cable and connect it again.
    If you use a USB hub with an external power source, verify it has been switched on.
    If you use a USB hub, try connecting the phone directly to the computer.
    Inspect the USB cable for problems and replace if necessary.
    Ensure that you are using an original Nokia cable and the correct cable type for your phone.
    Verify that you have selected PC Suite USB mode in the phone.
    Disconnect the cable, reboot the computer, and try again.
    Note; The connection problems may occur if you have previously unplugged USB devices without using the system tray utility for ejecting devices.
    Also if a working connection suddenly stops working you can try to repair it using the functionality existing in Nokia Configuration Tool
    Start > Programs > Nokia > Nokia Configuration Tool 6.0 > Uninstall > Repair Nokia Configuration Tool.
    This option fixes missing or corrupt files, shortcuts and registry entries.
    OR
    Go to Add/Remove programs on Control panel (called Programs in Windows 7).
    Select Nokia Configuration Tool installation and click Change/Remove.
    From the dialog choose Repair.
    I hope this has helped!
    Sheldrick
    Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

  • IFS configuration tool not running

    The configuration tool is not running and in the ifsconfig.bat
    There is this line:
    set IFS_HOME=D:\oracle\ora90/9ifs
    I do not why “/” and “\”
    Any idea???

    Can you supply the errors you are getting, how far through does it get? I've had problems in the past with the configuration tool when installing on a P4 due to the symcjit problem.
    Also are you trying to install 9.0.1 into a different home to iAS as we have had problems in the past.
    Bernard

Maybe you are looking for