Error with odata reporting

Hi
I set and configured reports in project online
On tuesday all reports were working and refreshing
Now, no one report is not able to refresh

Ok. In that case this issue look like at excel report level. Is versioning enabled in the reports library? Have you tried to restore to the previous version? Also, do you have the report copy in your local system? Is that also giving the error message?
What kind of information you are showing in the report? Could you share more details about your report data connection query so that we can assist you further?
Cheers, Badal

Similar Messages

Error with Member Report

HI Gurus,
I have a dimension with single hierarchy, I am able to process the dimension and view the members in a hierarchy on the excel.
On the admin tool under dimension -> Maintain dimension members -> View member Report gives an error that member report cannot be reviewed because of a circular reference and the application terminates. I am able to perform this activity for rest of the dimensions.
Any insight on this.
thanks

When you select the Dimension, Maintain Dimension Members, the Excel file opens, then click the View Member Report, do you get the interface box that allows you to select the dimension hierarchy and properties to add to your report, or do you get the error only? If you are getting the box called Make Report, and the information in the box states, cannot generate report, Error, there is a problem in the member which may indicate a circular reference, then there IS an issue with your hierachy and memberset. I am suprised that the file processes, but I would guess there a bad reference in the existing hierarchy.
My advice would be to take a portion of the dimension file, (ie delete some of the hierarchy), process it and test to see if you can build a report. Once you get to a point where the report may be built successfully, then add back in portions of the hierarchy until you get or find the error or portion of the file that will not allow for a report to be build. This may be an extreme test, but it should help narrow down the place where the report or hierarchy fails. I have tested examples in my system, and the report will not be constructed if the dimension is not processed succesfully.

Query Engine report error with Crystal Report 9 And MS SQL SErver 2000

Hi,
Currently I m doing a report with Crystal Report 9 and MS SQL as back End.I used a stored procedure to fetch data from DB.The Stored procedure works properly with query analyzer . But when I take report through application
"Table Not Found" Error is coming.Later I Found that In stored procedure for certain conditions only this error comes.But I cant resolve it.
Can any One check any pblm with this query
ELSE IF ISNULL(@intSourceID,0) = 10 Or ISNULL(@intSourceID,0) = 11 Or ISNULL(@intSourceID,0) = 12 Or ISNULL(@intSourceID,0) = 13 Or ISNULL(@intSourceID,0) = 14
BEGIN
IF ISNULL(@intSchemeID,0) <> 0
BEGIN
Select* From table
END
ELSE IF ISNULL(@intSchemeID,0) = 0
BEGIN
Select
END
END
When I comment the above codes , report works fine....
Can any one help me....plz....I m in such a critical situation...

Hi,
Currently I m doing a report with Crystal Report 9 and MS SQL as back End.I used a stored procedure to fetch data from DB.The Stored procedure works properly with query analyzer . But when I take report through application
"Table Not Found" Error is coming.Later I Found that In stored procedure for certain conditions only this error comes.But I cant resolve it.
Can any One check any pblm with this query
ELSE IF ISNULL(@intSourceID,0) = 10 Or ISNULL(@intSourceID,0) = 11 Or ISNULL(@intSourceID,0) = 12 Or ISNULL(@intSourceID,0) = 13 Or ISNULL(@intSourceID,0) = 14
BEGIN
IF ISNULL(@intSchemeID,0) <> 0
BEGIN
Select* From table
END
ELSE IF ISNULL(@intSchemeID,0) = 0
BEGIN
Select
END
END
When I comment the above codes , report works fine....
Can any one help me....plz....I m in such a critical situation...
Refer the above statement highlighted in BOLD. That statement is WRONG. Select what ???? Try any one of the below statement,
select ''
--or
select 0
--or
select null
Regards, RSingh

Error with crystal report using SAP GUI

Hi,
While using crystal report in sap gui i get the following error. I already googled and only found one thing on this forum that talks about this and it was never solve. Can you please help me? Thank you
Errors in Crystal Reports Installation(SupportsSAPQuery)
Message no.ALVHT218
Diagnosis:
This function requires that Seagate Crystal Reports and the Functional Area drivers(InfosetDrivers) from Seagate software are installed.
This sotware is either not available on your frontend or has been installed with errors
System Response:
The action has been terminated
Once again
thank you

Hi
Please check if you have installed all the SAP transports which are required for Crystal Reports to run based off SAP.
Regards
Sourashree

Error with Crystal Reports/VS2010

I've got a user that is getting the following error when trying to view a report from a .NET desktop application...the type initializer for 'crystaldecisions.crystalreports.engine.reportdocument' threw an exception
I've installed the runtime engine from here Link: [http://www.businessobjects.com/jump/xi/crvs2010/us2_default.asp] and also tried adding the merge module into the setup package for the application. I'm still seeing the same error. What else needs to be installed for the reports to work with VS2010?
Thanks

Yes I used an MSI to install the application and merge module.
This is on a 32bit Windows 7 machine.
Tried compiling/installing the app as x86, .Net 3.5 and also 4.0
The error shows when trying to view the report
The app only uses 2 reports, but errors on both
I cannot reproduce on my dev box, it works fine for me...typical
I haven't been able to track down another 32 bit Win7 box to test with
A little more history...
This same msi was used to install the app on XP boxes and the app worked fine. At the time, Beta 2 of the runtime files was all that was available so that's what I used.
One user has recently switched to Win7 and after installing the app, the initial error was that crpe32.dll could not be found, even though it was in the exact directory listed in the error message. Using Add/Remove Programs would not uninstall the runtime, so we followed the steps listed in the last post here Link: [Uninstalling Crystal for vs2010 beta;. That uninstalled the runtime so we could install the latest version of the runtime. Now we get the error listed in my initial post.
thanks!

Error With Crystal Reports On Windows Server 2012

Hello,
I have a VB.NET exe application created in Visual Studio 2010 that prints a crystal report directly to the printer. On Windows Server 2008 it worked fine but it does not work on Windows Server 2012. The report was originally created in Crystal Reports 2011. I have read elsewhere that in order to run a Crystal Report on WS 2012 that it needs to be created using Crystal Reports for Visual Studio. So I installed the developer version of Crystal Reports for Visual Studio (v. 13.0.8.1216). I opened the report in Visual Studio and saved it. I then installed the CRRuntime_64bit_13_0_8.msi on the WS 2012. My vb.net exe has the CrystalDecisions assemblies shown below. When I try to run the exe I get the error below. Does anyone have any idea as to what I am doing wrong? Thank you for your input.
Unhandled Exception: System.TypeInitializationException: The type initializer for 'PrintWorkOrderAndDrawing.PrintWorkOrderAndDrawing' threw an exception. ---> System.TypeInitializationException: The type initializer for 'CrystalDecisions.CrystalReports.En
gine.ReportDocument' threw an exception. ---> CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient,
or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://
www.businessobjects.com/support for more information.
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.CheckForCrystalReportsRuntime()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument..cctor()
   --- End of inner exception stack trace ---
   at CrystalDecisions.CrystalReports.Engine.ReportDocument..ctor()

Hi Thomas
First the info re.;
I have read elsewhere that in order to run a Crystal Report on WS 2012 that it needs to be created using Crystal Reports for Visual Studio.
is incorrect. CRVS will run all reports down to CR 9 without issues. And even reports created in older versions will, for the most part, work just fine.
The error is rather strange as it normally indicates that an incorrect runtime has been installed. However in your case as you are using CR 13.0.8.1216 and the 64bit_13_0_8.msi that does not look to be the case. I would like you to double check the CR references in the project. Say, crystaldecisions.crystalreports.engine. It should be version 13.0.2000.0.
If that is confirmed, then we may be at the permissions mentioned in the error. And I'd use Process Monitor for that. Filter ProcMon for the app exe and run the app. Look at the logs for "Access denied" messages. In the log, look for CrystalDecisions.CrystalReports.Engine, see what the exe is doing with it. Where is it trying to load it from? Etc., etc.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Adobe Reader error with PDF reports created using AS Reports Server 10g

Hi,
Recently when trying to run reports in our system (which uses Oracle Application Server Forms & Reports Services 10g - 10.1.2.0.2), sometimes when we try to run a report in PDF format the following happens:
1. A new window appears as expected
2. This window hangs/appears to try to load for a couple of minutes
3. Eventually an Adobe Reader error message appears saying the following:
*"There is a problem With Adobe Acrobat/Reader. Please exit Adobe Acrobat/Reader and try again".*
I have noticed that this problem only seems to occur when the client has Adobe Reader 9.3 installed (8.2 works fine).
Has anyone else encountered this problem? Is there a known workaround or is this a known issue?
Many thanks,
Chris

Does anyone have any ideas on this or has anyone encountered the same problem?
thanks

Error with Crystal Reports XI R2 installation

I was attempting to get support but no luck with over the phone support so maybe I can find some help here.
"It apparently looks like there is a problem with the Crystal Server Installation itself in your system. The sample files that came with Crystal package itself is not showing up.
See attached screen shot that shows the error when you are trying to run "SimplePreviewReport.asp" from IIS."
Screenshot shows the web page will not open from http:
localhost\CIReports\SimplePreviewReport.asp

Hi Todd
Can I assume that the product itself was installed correctly and you are having trouble running one of the SDK samples? Which product have you installed.... Crystal Reports or Crystal Reports Server? The sample page you are using indicates that you might be using the Report Design Component.... you will know this if you see the CrystalRuntime.Application object in your code.
Your post indicates that you have installed Crystal Reports Server...... If this is the case, and you want to use the RDC, then you will also need to install Crystal Reports on the server as well, since the RDC get's its runtime from Crystal Reports.

Connection error with Crystal Report XI, VB6 and Sybase ASE15

Hello !
I have an error #4002 when I want to launch a report in VB6 with the ActiveX Crystal Report Viewer.
I use Sybase ASE 15 with an ODBC link and the reports run stored procedures.
This error seems to be an authentification error, but I don't know what parameters are missing or wrong...
- My reports works well in the report designer.
- The reports connected to a text file or an ADO recordset work in VB6.
- The Verify Database works in design mode in VB6.
- The problem is the same with tables, stored procedures, SQL and with or without parameters...
- I tried to connect the report to a DataEnvironnment but I get the same error.
The problem appears when I use the Crystal Wizard to create a form automatically AND when I create objects directly in code like :
    Dim crapp As CRAXDRT.Application
    Dim oReport As CRAXDRT.Report
    Set crapp = New CRAXDRT.Application
    Set oReport = crapp.OpenReport("C:\myreport.rpt")
    CRViewer.ReportSource = oReport
    CRViewer.viewReport
Please help !

Hello,
I don't see any database logon code in what you posted. You need to log onto the database at runtime since Crystal Reports will never store passwords.
You can download and review the [Connection Properties|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00635998-751e-2b10-9cba-f50ee1e4ef81] document for more information on how to log onto your database at runtime. This document was written for CR9, but it's the same for CR10, CR XI (v11.0), and CR XI R2 (v11.5).
I hope this helps.
Sincerely,
Dan Kelleher

Error with Interactive Report Query

Hi,
using apex 4.1 on 11.2.0.1
i have the following query in an IR:
select     *
from     v_dialer_egn
where dtstart between :P200_STARTDATE and :P200_ENDDATEwhen i submit the query,the following error returns:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message: [FreeTDS][SQL Server]Operand type clash: text is incompatible with datetime[FreeTDS][SQL Server]Statement(s) could not be prepared. ORA-02063: preceding 2 lines from DIVOSECCv_dialer_egn is defined as:
CREATE OR REPLACE FORCE VIEW V_DIALER_EGN
   DTSTART,
   AGENTNUMBER,
   AGENTNAME,
   STRCALLEDNUMBER,
   CAMPAIGNNAME,
   CALLSTATUS,
   NDURATIONSEC,
   NSPEAKDURSEC,
   NEXTRAWORKDURATIONSEC,
   CALLTRIES
AS
   SELECT "dtstart" AS dtstart,
          "agentnumber" AS agentnumber,
          "agentname" AS agentname,
          "strcallednumber" AS strcallednumber,
          "campaignname" AS campaignname,
          "callstatus" AS callstatus,
          "ndurationsec" AS ndurationsec,
          "nspeakdursec" AS nspeakdursec,
          "nextraworkdurationsec" AS nextraworkdurationsec,
          "calltries" AS calltries
     FROM v_ora_dialer_egn@divosecc;the query works on sqlplus/toad/sqldeveloper
desc v_dialer_egn shows that dtstart is a date column.
if i remove the where clause, the query is accepted by apex.
v_ora_dialer_egn@divosecc is a view on mssql (v 10.x)
connected using freetds and unixodbc
Edited by: unficyp on 17.02.2012 06:31

I think you , using a Sql Server Database, have to convert the two text fields (:P200_STARTDATE , :P200_ENDDATE).
Check this conversions and let me know if it works:
http://www.sqlusa.com/bestpractices/datetimeconversion/
edit: Something like:
SELECT *
FROM V_DIALER_EGN
WHERE DTSTART BETWEEN CONVERT(DATETIME,:P200_STARTDATE, 103) AND CONVERT(DATETIME,:P200_ENDDATE, 103)Edited by: Vitor Rodrigues on 17/Fev/2012 14:37

PDF Error with Financial Reporting

When a user runs a report in Workspace it comes up fine, but when they try to do a PDF preview, we get an 500-Internal Server error. I think this is because the PDF writer was not installed or not installed correctly.
Is it possible to set this up after reports is up and functioning without reinstalling?

I am having the same issue
How was this error solved? Please help THanks.
How do I get to the Hyperion configuration utility and where is the HRCreatePrinters.exe file located?
Edited by: adi26 on Jun 10, 2009 6:29 PM
Edited by: adi26 on Jun 10, 2009 6:31 PM

Error with SL Reporting

Hi!
I would like to set up the SL Reporting and face with the following eror:
CCMS data could not be retrieved through RFC from system <SID>.
I have rechecked whether the RFC connection do exist in SMSY and also whether the RFC exist for system monitoring. Both tests were positive.
Has someone any ideas how to solve this problem?
Additional question:
I would like to add to SL Report the CCMS objects from System monitoring. Is it possible?
Does some suitable documentation exist for my issue?
Thank you very much!
regards
Thom

Hi Thom,
There is got to be a problem with RFC. Check your RFC's in SMSY for that SID. and test the connection. also, from SM59, test RFC & AUTHORIZATION. Also check RFC user and make sure it is not locked.
Thanks,

Error with view reports by drill down

Hello all!
I have problem with show drill-down reports.
But step by step:
I have 2 reports (made by Answers). And drill down from 1-st to 2-nd.
When i click on link IE show that it cann't show page.
I press F5 same times after that 2-nd report show.
I cann't understand why it happend. Maybe You cen help me.
Thank you.

Thank you for all. I found the cause of the problem. In our network and security configuration in front of OBIEE service we have IIS. User connect to port of IIS (9704) and IIS connect to OBIEE. In make for more control of connect and actions.
When I connect direct to OBIEE the problem is gone.
Supposedly IIS created the problem when I click on reports

Javascript errors with Crytical Report XI

I am using EP6 SP2 and CR XI. And deployed the compatible iview provided by BusinessObjects.
If I chose to display one BW report or one Folder in the iview, such as :
http://gdtelnotes.gd.ctc.com/businessobjects/enterprise11/sap/desktoplaunch/InfoView/CrystalEnterprise_Report/view.do?objId=2274
Everything is OK.
However, if I chose to display logon page of CR, such as:
http://gdtelnotes.gd.ctc.com/businessobjects/enterprise11/sap/desktoplaunch/InfoView/logon/logon.do
Javascript errors will occur.
Any instructions will be appreciated.
Many thanks,
Summer

Hi,
i have exactly the same error when upgrading tot 4.1.1.
In APEX 4.1.0 everything is working fine, but now in 4.1.1 in every IR report i got "gReport is empty or undefined" error message.
<script language="JavaScript" type="text/javascript">
;(function($){
gReport = new apex.worksheet.ws('');
$.htmldbIrBusyGrap=$.fn.htmldbIrBusyGrap=function(){
/* for bind IR ajax */
/* check do we have IR on page */
if($('#apexir_WORKSHEET_REGION').length>0){
/* replace apex internal function _BusyGraphic */
gReport._BusyGraphic=function(pState){
   if(pState==1){
    /* ir ajax start trigger htmldbIrAjaxStart event and show loading icon */
    $.event.trigger('htmldbIrAjaxStart');
    /*goModal('apexir_LOADER', {position:['30%',]});*/
     html_ShowElement('waitRegion');
    //$('#waitRegion').modal({persist:true,overlayCss:{backgroundColor:'#606060'},position:['30%',]});
    }else{
    /* check is there data stored to #apexir_WORKSHEET */
    if(!$('#apexir_WORKSHEET').data('htmldb')){
      /* store data to #apexir_WORKSHEET */
      $('#apexir_WORKSHEET').data('htmldb',{irReady:true});
      /* trigger htmldbIrReady event */
      $.event.trigger('htmldbIrReady');
     /* hide loading icon and trigger htmldbIrAjaxEnd*/
         html_HideElement('waitRegion');
     //$.modal.close();
    $.event.trigger('htmldbIrAjaxEnd');
   return;
$.event.trigger('htmldbIrReady');
$.htmldbIrReady=$.fn.htmldbIrReady=function(fn){
$(function(){if($.isFunction(fn)&&$('#apexir_WORKSHEET_REGION').length>0){$('#apexir_WORKSHEET_REGION').bind('htmldbIrReady',fn)}});
})(jQuery);
addLoadEvent(function(){$.htmldbIrBusyGrap();});
</script>When i add the following line in the javascript just above the call of the gReport
gReport = new apex.worksheet.ws('');then the pages are loaded without any error, but my custom icon is not displayed.

Report Selection Formula Error with Crystal Reports 2008 SP3 Fix Pack 3.5

Hello,
My name is Carlos, and I would like to report a defect found in the Crystal Reports 2008 SP 3 Fix Pack 3.5 Runtime that is affecting the majority of our reports. As well, I would like to ask if there is a simple workaround that does not involve updating hundreds of reports.
The issue is that the runtime engine incorrectly returns the report selection formula. I have included sample code showing what I mean.
To reproduce;
1. Create a simple report that has a date range filter like:
({Orders.Order_Date} >= {?START_DATE})
AND ({Orders.Order_Date} <= {?END_DATE})
2. Create a test app as follow that loads a report using the following code:
ReportDocument rpt = null;
try
rpt = new ReportDocument();
rpt.Load("TestReport.rpt");
this.txtMessage.Text = string.Format(
    "ReportSelectionFormula:{0}{1}",
     Environment.NewLine,
rpt.RecordSelectionFormula);
catch (Exception ex)
this.txtMessage.Text = ex.ToString();
3. Install Crystal Reports 2008 SP3 Fix Pack 3.5 Runtime [https://smpdl.sap-ag.de/~sapidp/012002523100006341772011E/cr2008fp35_redist.zip]..
4. Execute the app.
At this stage, the screen shows
ReportSelectionFormula:
(   ( NOT {Orders.Order_Date} >= {?START_DATE} )   AND   ( NOT {Orders.Order_Date} <= {?END_DATE} )   )
The expected value is:
ReportSelectionFormula:
(   ( {Orders.Order_Date} >= {?START_DATE} )   AND   ( {Orders.Order_Date} <= {?END_DATE} )   )
If we were to repeat the same test above but use the Crystal Reports 2003 SP3 runtime (i.e. no Fix Pack), which can be dowloaded from [https://smpdl.sap-ag.de/~sapidp/012002523100007123592010E/cr2008sp3_redist.zip], we would get the correct report selection formula. A side-effect for this incorrect report selection formula is a runtime exception complaining about an errorkind and a boolean being expected.
Do you know if there is any workaround that I can apply in code, perhaps a different Fix Pack? Is there a Fix Pack expected to be released soon? It is not practical for us to update our reports and use a different style in the record selection formula because we have many such reports, and our customers probably have even more.
Thank you.
-Carlos.

Already a known issue, here's the [KB 1584095 - A boolean NOT is added at the beginning of a record selection formula when the report is loaded by the Crystal Reports .NET SDK |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533383334333033393335%7D.do]

Error with odata reporting

Similar Messages

Maybe you are looking for