Error with ovi map for Cyprus

Today I updated my Cyprus Map. The roads are not displaying - only the outline of the island. The previous Cyprus map had the roads on.

Thanks for your input spyrosy.
I can believe your general statement. However; If you go to the ovi map selection site; Cyprus is still listed as a map to choose!
Going slightly off subject; I have a Garmin nuvi. I tried to get a Cyprus map for that. The main Garmin site does not offer it. However www.garmincyprus.com do have one on offer. I have emailed Garmin for an explanation.

Similar Messages

Mistakes with Ovi Maps - how often are they update...

I've noticed a few subtle mistakes with Ovi Maps driving around - for instance a street near me is actually blocked off at one end but the navigator tries to get you to turn into it, and another where it directs you to turn right but no right turn is allowed at that intersection.
Anyone know if these kind of things are corrected?

They are updated about 3 times a year if memory serves me right. Anyway, you can report errors like these to Nokia so they can fix it.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Cannot download 3.06 ovi maps for 5800XM after har...

Cannot download 3.06 ovi maps for 5800XM after hard reset. Any clue what's going on?

Similar problem on my E71 phone after upgrading the firmware to 300.21.012
I.e., when I start the application - it closes in a half way. Uninstalling is impossible.
When I start Nokia Maps updater - it says:
"Error. Cannot update licenses. Missing phone info: IMSI or IMEI cannot be obtained (20)."
Possible reason:
I've used Nokia Maps - Ovi beta before updating firmware to 300.21.012. After firmware update, I've updated Nokia Maps successfully with Nokia Maps Loader from the computer under Windows XP. But later I've restored phone info from backup, from another computer which is runing on Windows Vista. After restoring backup - I see my messages, etc., but Maps don't work at all (as written above).
Connecting through another computer (which runs under Windows Vista) - it says: "There are no new updates for your phone! Manage your maps and voices with Map Loader". But when I start Map loader - it looks as previous version loader; and allows only load voices, not maps. And still I can not start Maps in my E71 phone.
So how can I start using Nokia Maps again?

Connecting to EMS fails with No mapping for the Unicode character exists in the target multi-byte code page

I am getting the following error when trying to connect to both my exchange servers.
New-PSSession : [ex2013-002.nafa.ca] Connecting to remote server ex2013-002.nafa.ca failed with the following error
message : No mapping for the Unicode character exists in the target multi-byte code page. For more information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:12
+ $Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri ht ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : 1113,PSSessionOpenFailed
EMS used to connect ok. I am not sure if there is any connection but Outlook was installed recently on the exchange server to enable mailbox level backups.
Any help would be appreciated.
Steve Hurst

Hello Steve,
Firstly, you cannot install Outlook with Exchange because they share certain dll files.
About the EMS question, I suggest we try rebuilding the powershell virtual directory. If it still does not work, check the application log for more referernce.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Ovi map for Macedonia

Where i can download ovi map for Republic of Macedonia i have Nokia5230 ???

nenad87 wrote:
Where i can download ovi map for Republic of Macedonia i have Nokia5230 ?
Hi nenad87
Unfortunately Macedonia still classed as non-navigable country due to paucity of data available:
http://www.nokia-asia.com/services-and-apps/maps-o/prices_and_coverage-o/pricing-tables-navigable/no...
Happy to have helped forum in a small way with a Support Ratio = 37.0

Is Nokia 5228 compatible with ovi maps

Hi,can anyone tell me if the 5228 is compatible with ovi maps?

Hi!!
Try installing the version for Nokia 5233 http://europe.nokia.com/support/product-support/maps-support/compatibility-and-download.
The 5228, and the 5233 are the same (has is the 5232) http://www.forum.nokia.com/Devices/Device_specifications/5228/.
Not guaranteed to work though... Try it out and post back if you can.
@farby: that post is related to S40 devices...

Error in codepage mapping for source system

Hi Experts,
I am getting the following error while loading data from ECC only for Account COPA datasource.
Error in codepage mapping for source system. Error text:
Message no. RSDS_ACCESS013
Regards,
Sandeep Sharma

Hi Sandeep,
This is a issue related to idocsRFC connections from teh sourcesystem....
U can contact ur BASIS team to solve this...
From their end they have to chk the unprocessed/errored idocs in BD87...
They have to run a report:RBDAGAIN to process the errored idoc's in the source which are in STATUS:'02'.
This is a solution for temporarilrly basis...
If this occurs regularly they have to change the settings in SM59 which is so important...
Refer exact note for this: 784381
The SAP note 613389 may also be relevant for the error message "Could not find code page for receiving system", please check the information given in the note and see if you can use it to resolve the problem.
Regards,
Marasa.

Error in codepage mapping for source system. Error

Hi BW Experts,
I am facing following error:
Error message: Error in codepage mapping for source system. Error text:
Details: Inbound Processing ( 1000 Records ) : Errors occurred
Error in codepage mapping for source system. Error text:
Update PSA ( 0 Records posted ) : Missing messages
I repeated the delta working and everything fine.
Does anybody know why this error occurs?

Run rsa13 (for bi 7.0) find your source system which one you are using for data transfer and double click on it and find special options there select the optioned i mentioned already.
Please search SDN you can fin threads related to this thread
if not let me know.
Regards.

Error in codepage mapping for source system. Error text:

guyz,
im facing the below issue in prod.
Error in codepage mapping for source system. Error text:
Message no. RSDS_ACCESS013
Collection in source system ended
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Inbound Processing
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
need your guidance,
cheerz,
raps.
Edited by: raps on Mar 1, 2012 9:39 AM

Hi ,
Kindly go throught the following threads for your issue resolution::
Error in code page mapping for Source System
Erroe in source system
Regards,
Arpit

Litlle problem with nokia maps for 5800 xm

hi evryone,
i have a problem with nokia maps for my 5800 xpressmusi which is i cant find my acces point when itry to GO ONLINE
please help thank you

Hi,
When you switch on your device for the first time, the access points may be configured automatically based on the service provider information in your SIM card. Otherwise contact your operator or service provider to receive the access point settings if you cannot find it..

Route tracking with Ovi Maps without internet conn...

I have been trying to find an app, which would track my route without connecting to the internet. This is important in two cases: 1. when there is no service (in the mountains, for instance) 2. when it is prohibitively expensive (like abroad). It is great that I can download Ovi Maps for any location in the world, but I cannot really use it as every app that I know is trying to connect. I found one app, which came close, Parking 2. It does use Ove Maps and one would think that you can track back your car looking at the pre-loaded maps, but this is not the case. It still connects and then loads the maps (which are already pre-loaded on the phone!). And if there is no connection, there are no maps.
Does anyone know of a free or paid app, which can do exactly that: track your route based on the pre-loaded Ovi Maps without connecting to the net?
Thank you in advance for any info
Solved!
Go to Solution.

@optiplex - I Understand where you are coming from. It sounds fairly simple. Unfortunately, the maps that ovi has for places like ladakh and other places in the Himalayas are fairly featureless. There are no contours on the map for where the terrain is mountainous. For instance, I have planned an expedition in the Tsomoriri - Peldo - Skarchyu sector. The Terrain ranges from 15000 ft to 22000 + ft. Straight line just aint gonna work. If the map were bit more detailed then I could actually set way points to the destination and then work one way point at a time. Unfortunately, while I am happy that the GPS on N8 works wonderfully well without GPRS/3G or any cellular network, the ovi maps are a let down, in that they are not very detailed. (not talking about cities and towns and not referring to drive navigation at all which according to me works beautifully.)
optiplex330 wrote:
gvp1995 wrote:
When I am hiking in the mountains, or when I am abroad touring across some city, I want to see my route on the map, so I can always find my way back.
1. OVI Maps and Sport Tracker does not need Internet connection if you did the setting correctly.
2. Sport Tracker will record your trail. The trail can be shown on the Sport Tracker maps. The trail record can also be exported out as KML file and on the PC screen, display the trail on Google Earth.
Unfortunately, I don't think you can use the trail record to guide you back to your starting position while in the mountain.
So how about this method using OVI maps.
1. Set your Walk navigation to "Straight Line" instead of "Street".
2. Record your starting position as a Favorite on OVI Maps.
3. Walk into the mountain.
3. Use OVI Maps to navigate back to your starting position by selecting "Walk to". OVI maps will show how far and the built in compass will show you which direction is your starting position.
Not sure whether this is what you needed.

C5: How to enable loudspeaker with ovi maps?

C5:
Loudspeaker is en/disabled with the #-button. With ovi-maps I see, e.g. when driving home, in the upper right corner, that the loudspeaker is disabled. # changes the size of the map, so how do I enable the loudspeaker?

yes you have to download walk guidance
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Problems with OVI Maps 3.4 for 5800 XpressMusic

I downloaded Ovi Maps 3.4 on my 5800 and now every time I try to start using maps, the screen goes dim and the phone restarts itself. What I have to do to solve this problem?
I was using the version 3.3 and the navigation was working perfect.

Hi c_dzeprailidis
When you upgrade to OVI Maps v3.04 it adds an additional positioning method "Wi-Fi/Network which can cause issues for some users, so try disabling it. Go to Menu > Applications > Location > Positioning > Positioning methods.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Sending IDoc Batches to SAP: Issue with Header Mapping for SNDPRN

We are sending batched IDocs from XI to SAP. We need the individual IDocs to reflect different SNDPRN values. Our mapping creates the different IDoc EDI_DC40 record correctly with different SNDPRN values. However, XI wipes out the SNDPRN values in the payload. When we define Header mapping to get the Sender Party as the XPath to the SNDPRN in the payload, then the header mapping errors out because the XPath returns multiple values.
I wanted to know if anyone has successfully implemented sending IDoc batches to SAP from XI with different SNDPRN values.
Your feedback is appreciated.
Jay Malla
Licensed To Code
Genentech SAP XI Team

Hello,
I have the same problem. I want XI send an IDOC with the SNDPOR, SNDPRT and the SNDPRN that are in the EDIDC40.
I find this in sap.help : 
Mapping
The IDoc adapter does not make any special demands on mapping. The IDoc adapter must simply be provided with an IDoc XML structure at the Integration Server outbound channel. This either already exists or must be generated by using a mapping.
If the IDoc XML structure contains a control record, it is deleted and created again by the IDoc adapter. If you want to include additional values in the control record, you must select the Apply Control Record Values from Payload checkbox in the parameters in the communication channel and provide a corresponding mapping for the values.
You can include the values from the following fields in your IDoc control record:
MESCOD, MESFCT
TEST
EXPRESS
STD, STDVRS, STDMES
SNDSAD, SNDLAD
RCVSAD, RCVLAD
REFINT, REFGRP, REFMES
http://help.sap.com/saphelp_nw04/helpdata/en/b9/c5b13bbeb0cb37e10000000a11402f/frameset.htm
Perhaps we must use party configuration but I don't know how do this !
Regards,
Chris

[INFO TIPS] How to survive with Ovi Maps 3.0 insta...

Quick info tips. I wanna made this post earlier but I was on few days trip so didn't have a chance... but it's good coz I was tested GPS in real touristic environment.
I'm from Europe so I don't know how all links posted below will be works for people outside Europe.
My hardware: E63 with latest firmware + external GPS module LD-4W
Everything what we do here, we do with phone connected to the PC via USB cable in PC Suite mode and with fully battery charged.
If you have Maps 2.0, everything works well for you and you payed for any of licences - better stay with that version and don't touch Ovi Maps 3.0. Waste of time and nerves.
1. Please make phone data backup in PC Suite. Please make data backup of your memory card.
2. Check if you have firmware upgrade for your phone (click on some icon in PC Suite). But if you have cracked Symbian and you using cracked software better stay away from firmware upgrade. There's new cracking method for newest firmwares, ask Google. I don't use it, I'm clean. If you have new firmware - update the phone.
3. Download MapLoader - http://europe.nokia.com/explore-services/maps/download-maps/map-loader Do fresh install or update old MapLoader
4. Bluetooth MUST BE turn in phone. Why? Ask Nokia. -_- Just kidding but unfortunately it's not funny. Without Bluetooth Ovi Maps 3.0 installed in next step (6.) is crazy as hell. Application is completly unusable, skipping, switching... one big hell on the screen. I don't know how it looks like in phones with build in GPS module.
5. Download Ovi Maps 3.0 - http://europe.nokia.com/explore-services/maps/download-maps and update with this installer old Maps 2.0 in the phone.
6. Run Ovi Maps 3.0 and allow to download via Internet connection in your phone (wifi, gsm, 3g) some portion of initial data - 300 or 400kB - something like that, up to 1MB maximum then disconnect from Internet. It's needed to save some file (I don't remember name) and make structure of catalogues on memory card.
7. Leave Ovi Maps 3.0 and run MapLoader. This application is one big pain in **bleep**. Sometimes doesn't see your phone, sometimes doesn't recognize correctly your memory card size (when you are finished downloading your map/s data that stupid soft can say to you "you don't have" or something like that)... horrible! If something goes wrong - try restart your PC and phone then connect again via USB cable - still in PC Suite mode.
8. When luckily you have maps on your phone, try to pair your phone with your GPS module via Bluetooth or turn on build in module in other models (I think it works like that?).
9. When you will be look out for licence for walk navigation... you cannot find it. You can see only your region name (in my case it was Europe) and you have an option to buy... licenses for drivers. ROTFL! Licence for walk navigation is "hidden option". You must go here - http://europe.nokia.com/get-support-and-software/product-support/maps-support/how-to/how-to--use-map... - it's mini FAQ how to obtain it.
What I see, there's NO MORE free trial licenses in Maps v3.0 You must pay from day one. I buyed that licence for walk navigation for 10,12E (10 euro 12 euro cents) and it's not time restricted - looks like lifetime, ofc for the phone that you use (I think). Other licenses (for drivers) are time restricted (30 days and up as I remember).
Everything works fine for me. I was over 220km away from my hometown in awesome town Wrocław and Ovi Maps 3.0 helps me A LOT with navigation and searching for monuments in this town.
Marcin
NOKIA IN USE: N8

Ad. 1) "...Please make data backup of your memory card."
Because maybe you must be format memory card for proper maps installation (instead upgrade from Ovi Maps 3.0 installation level old installed maps from v2.0).
NOKIA IN USE: N8

Error with ovi map for Cyprus

Similar Messages

Maybe you are looking for