Error with PI MDM Adapter

Dear Experts,
We are working on PI MDM adapter. We are facing below error in PI Communication Channel...
" MDM Adapter listener could not start due to: Can not create repository
session '<server=XXXX serverUser=Admin
repository=XXXX user=Admin>' caused by: Path to object does
not exist at MDM Factory, the whole lookup name is deployedAdapters/MDM
Factory/shareable/MDM Factory. "
Any one please help us to resolve the issue.
Thanking you.
Hemanth.

Hello Hemanth
Please do not cross post the same issue on several different forums. This is against the forums etiquette :).
error with MDM Adapter.
Regards
XI/PI Moderator

Similar Messages

  • Issue with Receiver MDM Adapter - Integrated Configuration

    Hi Experts,
    My scenario is I need to pick a file from PI Directory and push it into MDM Ready folder.
    The source file structure is ~ delimiter text file and at the receiving end , I need to push the same file as it is.
    At the receiving side I have used MDM Adapter.
    The issue at receiving side is:
    I am receiving file with .xml extension with the same content as of source file but my requirement is .txt file.
    Please advise on this.
    I am using SAP PI 7.31.
    P.S.- I have not used FTP at the receiver side due to some other concerns.
    Thanks,
    Vivek Jain

    Hi Amit,
    Thanks for the reply.
    Yes we had tested successfully via SOAP UI as well (forgot to mention that). We are getting back the expected response in SOAP UI without using any credentials. We got the same response when we tested it through OS commands from PI server.
    The WS is hosted by the target system and they haven't maintained any credentials at their end. So when PI is trying to access, we don't need to provide any credentials. My question is, whether the target system should keep any credentials to send the synchronous response back to PI (java stack). We have tried that as well but since there aren't any logs, we are unable to verify whether the credentials are coming correctly.
    The service interfaces are correct and PI configuration are OK. I will try the XPI inspector for logs as you have suggested.
    Thanks
    Justin

  • Error with receiver HTTP adapter

    Hi all,
    my scenario is the following :
    ORDERS05 -> iDoc Adapter -> XI -> HTTP adapter ->URL
    I get the following error when calling the HTTP adapter :
    HTTP client. Code 108 reason
    Error Category = PLAINHTTP_ADAPTER
    Error ID = ATTRIBUTE_CLIENT
    First we thought that the problem may come from the HTTP server but we tried with these parameters :
    Target Host = service.sap.com
    Service Number = 80
    Path = /
    And we get the same error. So obviously the problem is on the XI side...
    Did anyone ever had the same problem ? Or has a clue on how to solve it ?
    Thank you very much in advance.
    Regards,
    Julien

    Hi,
    Pls check in the transacation sicf whether the http service is active or not.
    Regards
    Priyanka
    Message was edited by: Priyanka Balagangadharan

  • Error With JDBC receiver adapter

    Hi Guys,
                  I am working with File to Jdbc scenario.at the file side the process is working fine.the file is picked up by the file adapter and send it XI.then XI sends the data to JDBC it shows an error in receiver side.the error is as follws
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'sap_alt_spec' (structure 'Statementname'): java.sql.SQLException: ORA-00928: missing SELECT keyword
    so can any one tell me the solution to resolve the error?its urjent.

    Hi,
    please refer:
    for configuration of JDBC adpt-
    http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
    for XML document formats(this is much imp.)-
    http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
    Ranjit

  • Error with SAP MDM Server

    Hi All,
    We are working on discovery server version 3.
    After I mount the server and when i start the repository i cannot start it and get the following error
    u201CError Starting hp-discovery server (MDM Server) :
    Could not open the service control manager on serveru2019 server nameu2019 / Verify that the current windows user has the correct permissions, and that the target system is a windows based operating system u201D
    The problem sis resolved when i start the discovery server. and again occurs after few minutes.
    Its a tedious job to start server everytime and i would like to know what could be the possible reasons for getting this error so that i can avaoid this problem
    Thanks,
    MS.

    Hi,
    i have some problem too,
    the server was installed with option in MDS sap existing option.
    the config for MDS Listening port as below:
    MDS_LISTENING_PORT = 52250
    But when i mount the server in MDM console the value in column port is 59950.
    i have shared sapmnt folder with the other MDM server which is using port 59950 for MDS listening port.
    is there anyone know how to resolve this
    Regards,
    Husin

  • Error with "Managed" MDM Commands on iOS 5

    Hello,
    I am testing MDM commands on an iPad2 with iOS 5. All commands are excuting correctly; returning the appropriate responses to the MDM server with the exception of "ManagedApplicationList" and "InstallApplication". These commands return "The MDM server is not authorized to perform this operation." along with an error code in the response. What is need to excute these correctly?
    Thanks in advance.

    Hi, we were you able to resolve this issue? I am having the same problem.

  • Schema Error with Oracle Apps Adapter

    Hi folks,
    I'm trying to create a simple BPEL process to call the CREATE_LOCATION API in eBus 11.5.10.2 on a 10g Oracle Database. I'm using jdeveloper 10.1.3.4.
    I create the partner link with success, creating the wrapper package due to the record types. I create an invoke and create the variables based on the partner link.
    The problem appears when I try to assign data to the Invoke variables, I expand the Invoke Input variable but I only get as far as the payload. If I try a Transform activity I get the message 'Unable to get schema information for target'.
    If I open the xsd file it appears to be fine (I'm no expert).
    Am I missing a step?
    Cheers,
    Jason

    Kaldiss,
    Thanks for your reply.
    The XSD file is in the schemas section of the project, it's the one that gets generated when I created the apps adapter.
    I've tried remapping the variable to the message type but get the same problem, when I expand it out it I get:
    (x) Invoke_OA_C_ERP_L_InputVariable
    InputParameters
    It won't go any further.
    If I open the generated xsd in jdeveloper it looks correct, I see the input and output elements with their sub-compunents along with the record type definitions.
    Any more thoughts?
    Cheers,
    Jason

  • Error with Lotus Domino Adapter.

    Hello,
    We have ugraded to the last version of Oracle Waveset 8.1.1.7.
    We are using a Lotus Domino Adapter to create / update / delete Lotus account.
    But now, since the last update, when we create or update a Lotus Domino account we have the following error : "The object type must be specified" in the task summary page.
    Looking in the logs of the gateway, we have the followings lines :
    +(../../../../src/wps/agent/domino/DominoExtension.cpp,6946): Enter: getResourceObjectTypeView+
    +(../../../../src/wps/agent/domino/DominoExtension.cpp,7045): getResAttrValueWstring("Object Class","People")="$Users"+
    +(../../../../src/wps/agent/domino/DominoExtension.cpp,6956): getResourceObjectTypeView("resourceObjectType")="$Users"+
    +(../../../../src/wps/agent/domino/DominoExtension.cpp,6922): Enter: mapOldSchemaTypes+
    +(../../../../src/wps/agent/domino/DominoExtension.cpp,6932): mapOldSchemaTypes("$Users")="$Users"+
    +(../../../../src/wps/agent/domino/DominoExtension.cpp,6934): Exit: mapOldSchemaTypes+
    +(../../../../src/wps/agent/domino/DominoExtension.cpp,6962): Exit: getResourceObjectTypeView+
    +(../../../../src/wps/agent/domino/DominoExtension.cpp,7228): identity to note: cn=JOHN DOE/OU=TEST/O=COMPANY+
    +(../../../../src/wps/agent/domino/DominoExtension.cpp,3274): Enter: lookupNoteId+
    +(../../../../src/wps/agent/domino/DominoExtension.cpp,3278): objectTypeEnum=8, wIdentity='h'+
    +(../../../../src/wps/agent/domino/DominoExtension.cpp,7045): getResAttrValueWstring("namesDatabase","names.nsf")="names.nsf"+
    +(../../../../src/wps/agent/object/Extension.cpp,34): Enter: getRequiredResAttrValue+
    +(../../../../src/wps/agent/object/Extension.cpp,44): Exit: getRequiredResAttrValue+
    +(../../../../src/wps/agent/domino/DominoExtension.cpp,7066): getRequiredResAttrValueWstring("registrationServerMachine",result) got "IDM01/COMPANY" from resource+
    +(../../../../src/wps/agent/domino/DominoExtension.cpp,1580): Enter: getDbHandle+
    +(../../../../src/wps/agent/domino/DominoExtension.cpp,1582): Opening db handle for server = IDM01/COMPANY, db = names.nsf+
    +(../../../../src/wps/agent/domino/DominoExtension.cpp,1627): Exit: getDbHandle+
    +(../../../../src/wps/agent/domino/DominoExtension.cpp,3373): Exit: lookupNoteId+
    +(../../../../src/wps/agent/domino/DominoExtension.cpp,7258): Note ID is: 0x0+
    +(../../../../src/wps/agent/domino/DominoExtension.cpp,7279): Exit: getNoteHandle+
    +(../../../../src/wps/agent/domino/DominoExtension.cpp,3549): problem getting handle to the note.+
    +(../../../../src/wps/agent/object/RequestHandler.cpp,75): Enter: sendBuffer+
    +(../../../../src/wps/agent/object/RequestHandler.cpp,89): Sending buffer:+
    +(../../../../src/wps/agent/object/RequestHandler.cpp,67): <?xml version='1.0' encoding='UTF-16'?>+
    +(../../../../src/wps/agent/object/RequestHandler.cpp,67): <Response>+
    +(../../../../src/wps/agent/object/RequestHandler.cpp,67): <Result status='error'>+
    +(../../../../src/wps/agent/object/RequestHandler.cpp,67): <ResultItem type='message' status='error'>+
    +(../../../../src/wps/agent/object/RequestHandler.cpp,67): <Message id='com.waveset.adapter.RAMessages:DE_MUST_PROVIDE_OBJECT_TYPE'>+
    +(../../../../src/wps/agent/object/RequestHandler.cpp,67): </Message>+
    +(../../../../src/wps/agent/object/RequestHandler.cpp,67): </ResultItem>+
    +(../../../../src/wps/agent/object/RequestHandler.cpp,67): </Result>+
    +(../../../../src/wps/agent/object/RequestHandler.cpp,67): </Response>+
    Do you have any idea to resolve my problem ?
    Thanks in advance

    Hi,
    please refer:
    for configuration of JDBC adpt-
    http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
    for XML document formats(this is much imp.)-
    http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
    Ranjit

  • Communication Channel Error with MDM PI Adapter

    Dear Experts,
    We had new sever for PI(image copy). In new PI server we are facing problem only with MDM adapterin communication channel monitoring and below error occuring.
    *"  MDM Adapter listener could not start due to: Can not create repository session '<server=SAPMDMD serverUser=Admin repository=TTSL_Vendor_Dev user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'SAPMDMD' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer "
    Any expert please help us to resolve this.
    Thanks in advance.
    Regards,
    Hemu.

    Hello Heymanth,
    Make sure that connection is fine between systems. Test the RFC's in both systems. Also check the services too.
    /people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario
    /people/ramesh.gulipalli2/blog/2009/11/16/sap-47-to-mdm-integration-using-pi71-part1
    Regards
    Pothana

  • Error in Reciever RFC Adapter

    Hi All,
    While working with JDBCXIRFC, the only error with Reciever RFC Adapter is as
    follows.
    ZBAPICUSTOMER_DETAILS: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declaration(2)
    In SXMB_MONI, the messages are queued up.
    How to debug this error?
    Regards
    Pavan

    1. Map all the mandatory fields..
    I have mapped all the mandatory fields. If i enter same kind of values in the same fields of BAPI manually (in se37), the table gets updated.
    <b>how you can say that data is getting into the right tables...when you are sending the same data..</b>...may be the data is old only..
    <b>Perform the Message Mapping  and Interface Mapping test in IR only...</b>
    3. Kindly check the Sender_MM Mapping once more...If it is fine...reactivate and Update the cache..
    Its fine and reactivated and even updated cache.
    Now one doubt....
    In Message mapping, the sender mesage type is as follows.
    sender_mt 1:1
    ->Row element 1:unbounded
    > zkunnr element xsd:string 1: unbounded
    > zname1 element xsd:string 1: unbounded
    > zstras element xsd:string 1: unbounded
    > zadrnr element xsd:string 1: unbounded
    > ztelf1 element xsd:string 1: unbounded
    I have mapped ROW with ZBAPI_DETAILS.
    the root of sender message type SENDER_MT is left as it is....
    Is there anything need to be done (mapped) with this root of sender message type?
    <b>No i don't think so, what i can get from your approach is that you want to receive n similar type of records in a Message and want 2 create n different messages for each record from source structure..  </b>
    With this status, i have tested the Test Configuration in Integration Directory. Still getting same error message as follows...
    Kindly let me know the name of BAPI.
    <b>Perform the Message Mapping  and Interface Mapping test in IR only...</b>
    java.lang.NullPointerException thrown during application mapping com/sap/xi/tf/_sender_mm_:
    Regards,

  • Error with MDM Adapter.

    Dear Experts,
    We are working on PI MDM adapter. We are facing below error in PI Communication Channel...
    " MDM Adapter listener could not start due to: Can not create repository
    session '<server=XXXX serverUser=Admin
    repository=XXXX user=Admin>' caused by: Path to object does
    not exist at MDM Factory, the whole lookup name is deployedAdapters/MDM
    Factory/shareable/MDM Factory. "
    Any one please help us to resolve the issue.
    Thanking you.
    Hemanth.

    Hey,
    Please have a look at SAP Note 1468614.
    You need to apply a patch to fix this issue.
    Thanks
    Aamir

  • MDM Adapter supporting PI 7.0 released with MDM 7.1

    Hi,
    I have imported the MDM adapter which supports PI 7.0 and is released with MDM7.1 to facilitate Syndication/Import of data from/to MDM and configured the sender channel in PI for the same to fetch the file from the outbound port of MDM server.
    I observe that when file is syndicated to outbound port and is ready for PI processing, the adapter do not instantly fetch the file from outbound port even for hours but when i make a dummy change in Communication channel and again activate the same then it fetches the file and processes it in PI but after that if any other file is syndicated in the outbound port i have to again manually make a dummy change and activate it in PI and so on.
    I found one Sap Note 1452509 which is relevant to this but want to know if the settings mentioned in SAP note are to be made on MDM server or PI and if there is any other setting which i have to make in channel or in MDM so that file is processed instantly/near real time manner.
    I am on PI7.0
    Thanks,
    Amit

    Hey Amit,
    If you are talking about "Restart the MDM ADAPTER java component" then it will be done on PI server. MDM system does not have any java component.
    This is a common error which we also faced, it happens often right after the restart of MDM server.
    I have seen cases where when MDM server was restarted, we had to come to PI and restart the MDM Adapter services to make Sender MDM Adapter pick files from Ready folder.
    >>if there is any other setting which i have to make in channel or in MDM
    No other settings are required
    Thanks
    Aamir
    Edited by: Aamir Suhail on Feb 7, 2011 5:44 PM

  • PI MDM Adapter Error - MDM port not found

    We are working on an R/3 - PI - MDM scenario using the PI MDM Adapter. We are currently encountering the following errors.
    In RWB - Communication Channel Monitoring
    MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
    In RWB - Message Monitoring
    2009-09-08 15:31:22 Error Message could not be forwarded permantely to the JCA adapter. Reason: System error: MDM port not found
    2009-09-08 15:31:22 Error Message could not be forwarded to the JCA adapter. Reason: Permanent error: Adapter call failed. Reason: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found
    2009-09-08 15:31:22 Error Adapter Framework caught exception: System error: MDM port not found
    2009-09-08 15:31:22 Error Delivering the message to the application using connection MDM_http://sap.com/xi/MDMAdapter failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found.
    Is there an issue with our receiver communication channel and the MDM Access Parameters? We are using the Port code and Remote System code provided by the MDM team.
    Anyone experience this same issue?

    We are no longer seeing the MDM Port Not found error, but we are still seeing the UnknownServer error. Looking at RWB Message Monitoring it appears that the message is successfully sent to the MDM server, but nothing is coming into the Ready folder. Any ideas on where the message is going, and why it is not showing up in the Ready folder?
    In RWB - Communication Channel Monitoring
    MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
    In RWB - Message Monitoring
    2009-09-11 14:04:15 Information The message was successfully received by the messaging system. Protocol: XI URL: http: //XXXXXXXX/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
    2009-09-11 14:04:15 Information Using connection MDM_http ://sap.com/xi/MDMAdapter. Trying to put the message into the receive queue.
    2009-09-11 14:04:15 Information Message successfully put into the queue.
    2009-09-11 14:04:15 Information The message was successfully retrieved from the receive queue.
    2009-09-11 14:04:15 Information The message status was set to DLNG.
    2009-09-11 14:04:15 Information Delivering to channel: MDS_TEST_CC
    2009-09-11 14:04:15 Information The message was successfully delivered to the application using connection MDM_http ://sap.com/xi/MDMAdapter.
    2009-09-11 14:04:15 Information The message status was set to DLVD.
    I thought the implementation of the MDM Adapter was suppose to be straightforward and simple
    Edited by: Chris Williar on Sep 11, 2009 9:56 PM

  • Error in SOAP Receiver Adapter with HTTPS

    Dear All,
    I am developing a SOAP to SOAP scenario with HTTPS i.e. client without authentication and I am facing an issue with the receiver adapter. Few messages fails in the receiver side while rest are successful.
    Error - Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: Failed to get the input stream from socket: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by ChainVerifier
    Please let me know what can be the reason for the error.
    Thanks and Regards,
    Rana Brata De

    Hi Rana,
    Check the certificates sequence as well the certificates end dates in STRUST in SAP PI system. if, deployed in NWA level check over there.
    One more :: sending the data to web server or web page. make sure, PI is pointing to which server.
    Regards,
    Kesava.

  • Error with mail adapter

    Hi,
    I have an idoc to email scenario.
    The email is to be triggered, in case of an error in one of the idoc field values.
    The email, is being triggered successfully as seen in sxi_monitor. But, the receiver mail adapter is failing(as seen in adapter monitoring).
    The error as seen in adapter monitoring:
    <b>error occured: [2006-10-03T12:34:02Z] unable to call the mailer; com.sap.aii.messaging.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.io.IOException: server not responding OK to MAIL FROM; 501 5.5.4 Invalid Address</b>
    This is not an issue with the address specified, because, there are other interfaces which are using the same adapter to send mails successfully.
    MDT(Messaging system) specifies error as GENERAL_ERROR.
    Any hints?
    Thanks,
    Smitha.

    Hi,
    >>> MDT(Messaging System), the error is specified as GENERAL_ERROR.
    then maybe you need to ask some General about it?
    or at least a Colonel? ))
    but frankly saying there must be a difference
    it it works in once case and doesn't in the
    other don't you agree? so all you need to do
    it is to find it
    Regards,
    michal

Maybe you are looking for