Error with printer setup

Error with printer setup but everyhing seems to be fine

Hi @W6YUM , and welcome to the HP Forums!
I see you are getting an error, but everything seems to work.  I would like to try and assist.
Before we start, what error are you getting?
Are you connected wirelessly, or USB? 
Is the on the printer or computer?
Please let me know. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

  • Memory full error with printing pdf

    Occasionally I get a memory full error with printing pdf (Cmd-P - then use save PDF on lower left dialog screen). This is when just printing a few pages.
    Why Am I getting this and how can I fix this?

    I am not sure why but I have noticed some Adobe products when used to convert html documents (web pages) to pdf, can produce very large files.
    Try using Apple's Preview to see if those 'memory full' messages still occur.
    I am presuming you have plenty of free hard drive space and also sufficient RAM so suggesting it is an application bug about memory that is at issue and not actually a lack of physical memory.

  • "Error:-9672" Printer Setup Utility

    Trying to install a Canon Pixma iP6000D via wireless network - getting error message "Error:-9672" -says printer setup utility is not responding/working. Successful installed an HP (direct connection, though).
    Confusing to me, since this printer (the Canon) was connected to the wireless network before. Had problems getting it to print, so I deleted the printer and can't re-install it.
    Any help or leads are appreciate

    I was having the same problem with my HP 3180, MacBook and APE. I googled the error and found this link to some helpful advice that instructs you to uninstall the printer software and select a different built in print driver. It worked for me and took just minutes! hope this helps you too...
    http://homepage.mac.com/james.clay/iblog/B894479528/C85535593/E20061014203725/in dex.html

  • Need help with Printer Setup conventions

    I can't get my Brother printer to print from one computer--but it prints okay from the other computer on my network. I need to know the conventions for the Printer Setup Utility.
    There's a checkbox by every printer on the list. What does it mean when the checkbox is grayed out?
    Some printer names appear in bold. What does that mean?
    Thanx.

    Thank you for your reply. I appreciate your help in this and just want to understand what you're saying.
    As I say, the printer is displayed in the print dialog box but the checkbox is grayed out. I'm assuming that when you say "...it can't find/see them now," you mean the print dialogue can't see them (the drivers). Your last sentence confuses me. You say, "Do you maybe have Printer Sharing enabled & they aren't actually directly connected? If so you have to reboot after turning it off." A little confusion about your antecedents here. What isn't actually connected? The printer? So I have to reboot after turning it off, "it" I suppose is the printer, is that right? I will try that. So turn printer off, reboot, turn printer on. Right?
    I will describe my problem. l thought that if I understood why the checkbox was grayed out I might see what my problem was. If you want me to start another topic I can do that.
    Problem: I have a network with 2 computers and the Brother
    multifunction fax/printer. I'm using an Apple airport hub. The printer
    and one computer (Mac tower) are connected to the airport base via
    ethernet. The 2nd computer (Apple laptop) is on the wireless network.
    Until recently i could print from both computers. Now I can't print from
    the tower. But I can still print from the laptop.
    When I try to print from the tower I get an error message that says, "Cannot print from current printer." I have rebooted, reinstalled printer drivers, checked cables, deleted printer from printer list and re-added printer all to no avail. But as I say, I can still print from the laptop which is using Airport. So the printer prints, the hub connects to the printer okay (ethernet) and I know the tower connects to the hub (I can ping the printer okay from the tower.)
    I am conversing to Brother support via email and their first suggestions I have already tried. Perhaps there's some problem in the network, but I can't figure it out. Worse yet, now when I go to the Network preferences I get an error message which says, "Your network settings have been changed by another application." THIS ERROR MESSAGE WON'T GO AWAY! I can click 'okay' but it reappears. I have to force quit the System Preferences to get out. If you can help with any of these problems I surely appreciate it.

  • Parse error with print

    Hi,
    I tried to build a custome web gallery into LR 4.3 on MAC.
    I started with example from LR SDK zip.
    In my index.html sample file, i simply declare some variables at the top like this:
    <%--[[ Define some variables to make locating other resources easier     firstPage was defined in our manifest.]]      local others = "content"    local theRoot = "."    local mySize = "large"    local firstImage    local title    local caption    local width    local height      local LrLogger = import 'LrLogger'    local myLogger = LrLogger( 'libraryLogger' )          myLogger:enable('print')          local debug, info, warn, err = myLogger:quick( 'debug', 'info', 'warn', 'err' ) %> 
    After, inside a script tag, i would like to print into index.html outputed file a json file with images name.
    Before that i simply tried to print a test string, and i got in Console app this message : SyntaxError: Parse error
    Where am i wrong ?
    Thanks
    Regards

    Hi , Welcome to the HP Forums! I see that you are getting a printhead error with your HP Officejet 6830. I am happy to help!  I would recommend to go through the steps within this guide, 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error Message Displays. You will also want to make sure you are using Genuine HP Ink Cartridges, and that none of your Ink Cartridges are low or empty.  Hope this guide helps!  “Please click the Thumbs up icon below to thank me for responding.”

  • HP LaserJet Pro 300 color MFP runs cleaning and Mis Prints Error with Printing above 5 pages

    I have an HP Pro 300 Printer with New genuine cartridges. But when I print or make copies of multi page jobs it always comes up with a message on the screen which says "cleaning"  and then give a "Mis Printer Error".The printer is out of warranty. The Print quality is excellent but the error it gives all the time is a major problem. Has anyone solution for this? Please help! Thanks  

    Restoring the defaults doesnt usually purge out the memory of a printer.  You need a cold reset to complete that proceedure. Cold Reset steps:http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-LaserJet-Pro-200-color-MFP-M276nw-Cold-reset/td-p/5060955 The video at the bottom of the first page is very helpful.

  • ERRORS WITH PRINTING TO AN XP NETWORK

    Hi,
    I am sharing a network with a win xp computer using a wireless network from my mac book pro running os 10.5.1 It works great except for one problem: I am unable to print to the HP Officejet 4315 That is a printer attached to the XP machine with print sharing turned on. It is shared on the netwk and works fine. I can acutally see the printer on the windows network when I add printer through the workgroup/windows/server. When I try to add it on, OS X asks for drivers for the printer. I looked up the print drivers and there wasn't one for this particular printer. I tried generic postcript printer, but even that didn't help. I have also tried to download linux foundation drivers for 0S X printing. The best response I got was that the printer gets the job and then just hangs without printing.
    Please help.

    I had a similar problem with a deskjet and a dell 5100c. I can't specifically remember where I found the solution, but I had to enable CUPS and also download and install gutenprint drivers. I did this a few months ago so i could not walk you through it exactly but check out
    http://gimp-print.sourceforge.net/
    you might be able to find a gutenprint driver for your printer there.

  • Error with emcli setup

    All emcli commands give the following error:
    Error: Some required configuration is missing, corrupt, inaccessible, or insecure (access permissions are too liberal).
    Resolve the problem and run setup.
    java.io.IOException: No locks available
    at sun.nio.ch.FileChannelImpl.lock0(Native Method)
    at sun.nio.ch.FileChannelImpl.lock(FileChannelImpl.java:832)
    at oracle.sysman.emSDK.emCLI.Utility.lockFile(Utility.java:425)
    at oracle.sysman.emSDK.emCLI.CLIController.go(CLIController.java:303)
    at oracle.sysman.emSDK.emCLI.CLIController.main(CLIController.java:157)
    The label being used is EMGC_PT.12.1.0.4PG_LINUX.X64_120319.2200

    Hi @W6YUM , and welcome to the HP Forums!
    I see you are getting an error, but everything seems to work.  I would like to try and assist.
    Before we start, what error are you getting?
    Are you connected wirelessly, or USB? 
    Is the on the printer or computer?
    Please let me know. Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Archivelink job error with Print Lists

    I´m trying to configure   Archive Link Print Lists .
    In order to test it:
    - I have sheduled job ARCHLINK (5 minutes period , spool to a local printer , without immediate spool request)
    - I have created an spool request to a local printer without immediate output (any list , in my case from report RSUSR200 , Execute and print)
    - From the spool (SP01) , changing print paramters (press icon print with changed parameters) and I send the request to my output device ARCH , wich is defined
      as type ARCHLINK , then , i get the message "Archive request created for spool request 10.611 in system NSP"
    - using transaction OAM1 i see my request waiting to be processed in "storage queue"
    - after job ARCHLINK has been executed i see in the log the message " 22040400 parameter (parameter error) OA501 " and this is the problem
    If things would have worked properly , after job ARCHIVELINK , job CARA should have started , and finally job XXXXXEE5215878F1ADB8001E68C98EB3 (program RSCMSCAJ
    ) should have started .
    ¿does someone has any idea about what can be the solution for the problem?
    Thank you in advance

    Reinstalling the printer drivers from the Canon site seems to have fixed the problem in my case.
    It seems the "update" from Apple deleted some of the older Canon driver files so you need to re-run the old driver installer from Canon to reinstate the missing files.
    Hopefully this will resolve the problem for others using OS X 10.6.8 with older Canon printers.
    If the Canon driver installer for your printer is so old it uses classic, if you have a backup of your system you may be able to find the missing files and copy them across manually but it won't be easy.

  • Communication error with printer hooked to time capsule

    I have a Macbook using 10.5.8 and a 500 gig Time Capsule with an Epson cx 3200 printer plugged into it and when I try to print, I get a 'Communication Error". What am I doing wrong?

    Welcome to the discussion area!
    If your Epson is compatible (not all devices will work at the USB port of the Time Capsule), the Apple Printer Troubleshooting Guide will provide some assistance.
    Keep in mind that only the printing function is supported if your device is compatible. Fax, Scan, Copy, Maintenance, etc., are not supported, so you will need to connect the device directly to your computer if you need these functions.

  • Help with printer  setup

    we need to set a print to file printer. wich are the settings we need to use?

    Were you actually able to print successfully over the wireless connection? My printer responds wirelessly-- the print try opens, the paper feeder turns, but then I get a 306 error.
    I spent hours with tech support yesterday-- two different guys-- and both said I am trying to do the impossible. They say the Base Stations are only designed to deal with printers via USB.
    But I don't see why the Base Station should care whether the wireless device is a printer or xbox or what have you, if it is wireless enabled.
    It's all very frustrating.

  • Please help with printer setup

    I cant seem to get my new canon mp530 printer to work via airport extreme or express. I have downloaded the driver software on both powerbooks, and have been able to print when the usb is plugged in directly.I am replacing a hp1600 that worked over this network. Thank You...the error message i get is"error :300.the printer does not respond.make sure that the printer is powered on and properly connected to your computer.
    Message was edited by: lawrence gelman

    Were you actually able to print successfully over the wireless connection? My printer responds wirelessly-- the print try opens, the paper feeder turns, but then I get a 306 error.
    I spent hours with tech support yesterday-- two different guys-- and both said I am trying to do the impossible. They say the Base Stations are only designed to deal with printers via USB.
    But I don't see why the Base Station should care whether the wireless device is a printer or xbox or what have you, if it is wireless enabled.
    It's all very frustrating.

  • HP Deskjet 1510, Problems with printer setup

    I'm trying to install my new HP Deskjet 1510 All-In-One printer and I've been having a really rough time with it. My operating system is Windows 7 64-bit.
    When connecting the printer to my laptop via the usb port it always says that the usb device is not recognizable, and I can never finish the installation and link my printer to my pc. Within the control panel it is described as an "unknown device". Right now the printer functions just fine as a copy machine, and it's the second one I have tried so it can't be broken. I've also already tried swapping out the usb cord for a fresh one but that didn't seem to help either. Is there a seperate driver I should download for the usb cord?
    Any advice is appreciated!

    Hello Technicolor,
    Welcome to the HP Forums.
    I see we are having a bit of an issue getting the printer installed on your Windows 7 computer.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    Please remove the usb cable from the printer and from the computer and leave it disconnected until further notice.
    The next step is to remove any software that may have been installed incorrectly. To do so, please click on the following link for Uninstalling the Printer Software.
    Once the uninstall is complete, please restart the computer.
    When the computer is back up and running, please click on the next link and save the file to the Desktop so that it creates its own icon. This will make it easy to find when the download is complete. HP Deskjet 1510 e-All-in-One Printer series Full Feature Software and Drivers.
    The installation will give you step by step instruction's.  It will also tell you when to connect the usb cable so please do not connect it until prompted to do so.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Error with printer

    Hi gurús, I´m Having a problem with a printer....When I create a purchase order, the system set as default a NEU message.
    Also is set the printer as a defualt value.
    I would like to know where i can change the printer, becuase the one that actually show me the system is wrong.
    I know is customizing, but i cant find where is...
    Thanks in advance
    Regards
    Enzo

    Hi,
    Hope there is no problems in output determination of PO as you got NEU as output type.Now Check in SPAD (Printer settings) settings & try to check the printer configuration. Check Device attributes, Access methods etc. are maintained in Spool Administration (SPAD) for the selected printer (your local Printer, may be ur using HP01or any  but in SAP std is LP01) but consult with your basis consultant regading above.
    Check the following also:
    Spool generated using SP01 or SP02.
    Output device.
    Local printer settings.
    Paper Tray, Print Mode, Printer
    Note:
    Check MN04 and NACE t.codes
    Regards,
    Biju K

  • Error with cluster setup: Java.lang.AssertionError

    I am trying to setup a Weblogic 9.2 in a clustered Env in Windows 2003. My First machine comes up successfully but when I try to bring up the second server, I got the following error:
    <May 30, 2011 9:31:53 PM EST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: java.lang.reflect.InvocationTargetExceptionjava.lang.AssertionError: java.lang.reflect.InvocationTargetException
    Any idea what went wrong? Thanks in advance.
    Edited by: 862535 on May 31, 2011 2:51 AM

    Hi,
    I am using the startWeblogic.cmd file to start my admin server. The configurations are as follows:
    <?xml version='1.0' encoding='UTF-8'?>
    <domain xmlns="http://www.bea.com/ns/weblogic/920/domain" xmlns:sec="http://www.bea.com/ns/weblogic/90/security" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls" xsi:schemaLocation="http://www.bea.com/ns/weblogic/90/security/xacml http://www.bea.com/ns/weblogic/90/security/xacml.xsd http://www.bea.com/ns/weblogic/90/security http://www.bea.com/ns/weblogic/90/security.xsd http://www.bea.com/ns/weblogic/920/domain http://www.bea.com/ns/weblogic/920/domain.xsd http://www.bea.com/ns/weblogic/90/security/wls http://www.bea.com/ns/weblogic/90/security/wls.xsd">
    <name>AdobeClusterTest1</name>
    <domain-version>9.2.2.0</domain-version>
    <security-configuration>
    <name>AdobeClusterTest1</name>
    <realm>
    <sec:authentication-provider xsi:type="wls:default-authenticatorType"></sec:authentication-provider>
    <sec:authentication-provider xsi:type="wls:default-identity-asserterType">
    <sec:active-type>AuthenticatedUser</sec:active-type>
    </sec:authentication-provider>
    <sec:role-mapper xmlns:xac="http://www.bea.com/ns/weblogic/90/security/xacml" xsi:type="xac:xacml-role-mapperType"></sec:role-mapper>
    <sec:authorizer xmlns:xac="http://www.bea.com/ns/weblogic/90/security/xacml" xsi:type="xac:xacml-authorizerType"></sec:authorizer>
    <sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
    <sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
    <sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
    <sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
    <sec:name>myrealm</sec:name>
    </realm>
    <default-realm>myrealm</default-realm>
    <anonymous-admin-lookup-enabled>true</anonymous-admin-lookup-enabled>
    <credential-encrypted>{3DES}X6flYzaSKVldhjc89aglUdABSB3zzVZsY9YI67ccMHrgZMaLCfNECt1V+JUIH076w2Sf7Iog+vZDHCpTplkDiHrZ/rnC6Frd</credential-encrypted>
    <node-manager-username>weblogic</node-manager-username>
    <node-manager-password-encrypted>{3DES}f472My412IbO+dkDSoutKA==</node-manager-password-encrypted>
    <enforce-valid-basic-auth-credentials>false</enforce-valid-basic-auth-credentials>
    </security-configuration>
    <jta>
    <abandon-timeout-seconds>600</abandon-timeout-seconds>
    </jta>
    <server>
    <name>AdminServer</name>
    <listen-address></listen-address>
    </server>
    <server>
    <name>TestServer2</name>
    <ssl>
    <enabled>false</enabled>
    </ssl>
    <machine>AdobeMachine2</machine>
    <listen-port>8002</listen-port>
    <cluster>lc8_cluster</cluster>
    <listen-address>20.2.4.52</listen-address>
    <jta-migratable-target>
    <user-preferred-server>TestServer2</user-preferred-server>
    <cluster>lc8_cluster</cluster>
    </jta-migratable-target>
    </server>
    <server>
    <name>TestServer1</name>
    <machine>AdobeMachine1</machine>
    <listen-port>8002</listen-port>
    <cluster>lc8_cluster</cluster>
    <listen-address>20.2.4.51</listen-address>
    <jta-migratable-target>
    <user-preferred-server>TestServer1</user-preferred-server>
    <cluster>lc8_cluster</cluster>
    </jta-migratable-target>
    </server>
    <cluster>
    <name>lc8_cluster</name>
    <multicast-address>239.192.0.1</multicast-address>
    <multicast-port>8011</multicast-port>
    </cluster>
    <production-mode-enabled>true</production-mode-enabled>
    <embedded-ldap>
    <name>AdobeClusterTest1</name>
    <credential-encrypted>{3DES}E0x7cApYC85prQMGcqhWRW9x123x/hPp1BB2w1x7TI=</credential-encrypted>
    </embedded-ldap>
    <configuration-version>9.2.2.0</configuration-version>
    <machine>
    <name>AdobeMachine1</name>
    <node-manager>
    <listen-address>20.2.4.51</listen-address>
    <debug-enabled>true</debug-enabled>
    </node-manager>
    </machine>
    <machine>
    <name>AdobeMachine2</name>
    <node-manager>
    <listen-address>20.2.4.52</listen-address>
    <debug-enabled>true</debug-enabled>
    </node-manager>
    </machine>
    <migratable-target>
    <name>TestServer1 (migratable)</name>
    <notes>This is a system generated default migratable target for a server. Do not delete manually.</notes>
    <user-preferred-server>TestServer1</user-preferred-server>
    <cluster>lc8_cluster</cluster>
    </migratable-target>
    <migratable-target>
    <name>TestServer2 (migratable)</name>
    <notes>This is a system generated default migratable target for a server. Do not delete manually.</notes>
    <user-preferred-server>TestServer2</user-preferred-server>
    <cluster>lc8_cluster</cluster>
    </migratable-target>
    <admin-server-name>AdminServer</admin-server-name>
    </domain>
    I have the same set of configurations on another machine. 1 works while the other did not. Any idea? Thanks again.

Maybe you are looking for