Error with printer

Hi gurús, I´m Having a problem with a printer....When I create a purchase order, the system set as default a NEU message.
Also is set the printer as a defualt value.
I would like to know where i can change the printer, becuase the one that actually show me the system is wrong.
I know is customizing, but i cant find where is...
Thanks in advance
Regards
Enzo

Hi,
Hope there is no problems in output determination of PO as you got NEU as output type.Now Check in SPAD (Printer settings) settings & try to check the printer configuration. Check Device attributes, Access methods etc. are maintained in Spool Administration (SPAD) for the selected printer (your local Printer, may be ur using HP01or any but in SAP std is LP01) but consult with your basis consultant regading above.
Check the following also:
Spool generated using SP01 or SP02.
Output device.
Local printer settings.
Paper Tray, Print Mode, Printer
Note:
Check MN04 and NACE t.codes
Regards,
Biju K

Similar Messages

Error with printer setup

Error with printer setup but everyhing seems to be fine

Hi @W6YUM , and welcome to the HP Forums!
I see you are getting an error, but everything seems to work. I would like to try and assist.
Before we start, what error are you getting?
Are you connected wirelessly, or USB?
Is the on the printer or computer?
Please let me know. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Memory full error with printing pdf

Occasionally I get a memory full error with printing pdf (Cmd-P - then use save PDF on lower left dialog screen). This is when just printing a few pages.
Why Am I getting this and how can I fix this?

I am not sure why but I have noticed some Adobe products when used to convert html documents (web pages) to pdf, can produce very large files.
Try using Apple's Preview to see if those 'memory full' messages still occur.
I am presuming you have plenty of free hard drive space and also sufficient RAM so suggesting it is an application bug about memory that is at issue and not actually a lack of physical memory.

Parse error with print

Hi,
I tried to build a custome web gallery into LR 4.3 on MAC.
I started with example from LR SDK zip.
In my index.html sample file, i simply declare some variables at the top like this:
<%--[[ Define some variables to make locating other resources easier firstPage was defined in our manifest.]] local others = "content" local theRoot = "." local mySize = "large" local firstImage local title local caption local width local height local LrLogger = import 'LrLogger' local myLogger = LrLogger( 'libraryLogger' ) myLogger:enable('print') local debug, info, warn, err = myLogger:quick( 'debug', 'info', 'warn', 'err' ) %>
After, inside a script tag, i would like to print into index.html outputed file a json file with images name.
Before that i simply tried to print a test string, and i got in Console app this message : SyntaxError: Parse error
Where am i wrong ?
Thanks
Regards

Hi , Welcome to the HP Forums! I see that you are getting a printhead error with your HP Officejet 6830. I am happy to help! I would recommend to go through the steps within this guide, 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error Message Displays. You will also want to make sure you are using Genuine HP Ink Cartridges, and that none of your Ink Cartridges are low or empty. Hope this guide helps! “Please click the Thumbs up icon below to thank me for responding.”

HP LaserJet Pro 300 color MFP runs cleaning and Mis Prints Error with Printing above 5 pages

I have an HP Pro 300 Printer with New genuine cartridges. But when I print or make copies of multi page jobs it always comes up with a message on the screen which says "cleaning" and then give a "Mis Printer Error".The printer is out of warranty. The Print quality is excellent but the error it gives all the time is a major problem. Has anyone solution for this? Please help! Thanks

Restoring the defaults doesnt usually purge out the memory of a printer. You need a cold reset to complete that proceedure. Cold Reset steps:http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-LaserJet-Pro-200-color-MFP-M276nw-Cold-reset/td-p/5060955 The video at the bottom of the first page is very helpful.

ERRORS WITH PRINTING TO AN XP NETWORK

Hi,
I am sharing a network with a win xp computer using a wireless network from my mac book pro running os 10.5.1 It works great except for one problem: I am unable to print to the HP Officejet 4315 That is a printer attached to the XP machine with print sharing turned on. It is shared on the netwk and works fine. I can acutally see the printer on the windows network when I add printer through the workgroup/windows/server. When I try to add it on, OS X asks for drivers for the printer. I looked up the print drivers and there wasn't one for this particular printer. I tried generic postcript printer, but even that didn't help. I have also tried to download linux foundation drivers for 0S X printing. The best response I got was that the printer gets the job and then just hangs without printing.
Please help.

I had a similar problem with a deskjet and a dell 5100c. I can't specifically remember where I found the solution, but I had to enable CUPS and also download and install gutenprint drivers. I did this a few months ago so i could not walk you through it exactly but check out
http://gimp-print.sourceforge.net/
you might be able to find a gutenprint driver for your printer there.

Archivelink job error with Print Lists

I´m trying to configure Archive Link Print Lists .
In order to test it:
- I have sheduled job ARCHLINK (5 minutes period , spool to a local printer , without immediate spool request)
- I have created an spool request to a local printer without immediate output (any list , in my case from report RSUSR200 , Execute and print)
- From the spool (SP01) , changing print paramters (press icon print with changed parameters) and I send the request to my output device ARCH , wich is defined
as type ARCHLINK , then , i get the message "Archive request created for spool request 10.611 in system NSP"
- using transaction OAM1 i see my request waiting to be processed in "storage queue"
- after job ARCHLINK has been executed i see in the log the message " 22040400 parameter (parameter error) OA501 " and this is the problem
If things would have worked properly , after job ARCHIVELINK , job CARA should have started , and finally job XXXXXEE5215878F1ADB8001E68C98EB3 (program RSCMSCAJ
) should have started .
¿does someone has any idea about what can be the solution for the problem?
Thank you in advance

Reinstalling the printer drivers from the Canon site seems to have fixed the problem in my case.
It seems the "update" from Apple deleted some of the older Canon driver files so you need to re-run the old driver installer from Canon to reinstate the missing files.
Hopefully this will resolve the problem for others using OS X 10.6.8 with older Canon printers.
If the Canon driver installer for your printer is so old it uses classic, if you have a backup of your system you may be able to find the missing files and copy them across manually but it won't be easy.

Communication error with printer hooked to time capsule

I have a Macbook using 10.5.8 and a 500 gig Time Capsule with an Epson cx 3200 printer plugged into it and when I try to print, I get a 'Communication Error". What am I doing wrong?

Welcome to the discussion area!
If your Epson is compatible (not all devices will work at the USB port of the Time Capsule), the Apple Printer Troubleshooting Guide will provide some assistance.
Keep in mind that only the printing function is supported if your device is compatible. Fax, Scan, Copy, Maintenance, etc., are not supported, so you will need to connect the device directly to your computer if you need these functions.

Alignment error with printer HP4500

I have a new HP4500 wirelessly connected to my desktop using windows 7. Although it works perfectly it tends to print too high up on each sheet of paper and with some printing adds a line at the top and the bottom of the page showing about one third of each character. The cartridges are HP and the display on the Word screen is spaced correctly.

Hello @sideslip and welcome to the HP Forums
Which HP 4500 do you have?
Are you able to make a Copy on that 4500 without the same issue occurring?
Is the printer connected via USB or wireless?
Does it have that issue regardless of what program you print from?
Once I have this information I should be able to help you narrow down what's causing the issue!
Hope to hear from you soon
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Error with printing via .sh file

Hi all,
We're currently learning Documaker and we were given an existing workspace to work with. In the workspace, there is a .sh file that when run should generate PDFs from an XML file. Upon runtime, the pdf generated is 0 bytes and thus cannot be opened. In the errfile.dat, the following error is found:
GenData
Transaction Error Report - System timestamp: wed apr 30 13:24:34 2014
DM10292: Error in <RULXMLExtract()>: Unable to execute function <DXMLoadXMLRecs()>.
DM13025: Warning in RCBSendToErrBatch(): The transaction is being assigned to the error batch.
DM10947: Error in NoGenTrnTransactionProc(): Unable to execute function RULLoadXtrRecs(pRPS).
DM12018: Error in RPDoBaseFormsetRulesForward(): Unable to execute base rule <NoGenTrnTransactionProc>.
DM12066: Error in RPProcessOneTransaction(): Unable to RPDoBaseFormsetRulesForward(pRPS, RP_PRE_PROC_A).
DM12065: Error in RPProcessTransactions(): Unable to RPProcessOneTransaction(pRPS). Processing will continue. See INI group:<GenDataStopOn> option:TransactionErrors.
==> Warning count:    1
==> Error    count:    5
End of Transaction Error Report - System timestamp: wed apr 30 13:24:34 2014
Elapsed Time: 0 seconds
What is wrong with our method? Thanks!

We have followed the pointers given in this thread but are still encountering the same errors and output.
With the content of our extract and XML file like the ones mentioned above, our ini files also contain the following options:
< RUNMODE >
    CheckNextRecip                = No
    ChkDstLenExceeded          = No
    CompiledFAP                    = No
    DownLoadFAP                  = No
    LoadCordFAP                   = Yes
    NAUNLOAD                     = Yes
    XMLEXTRACT                  = Yes
    XMLFileExtract                = Yes
    XMLFileExtractName      = SCH=1,XML_FILE_INPUT 16,85
< ExtractKeyField >
    SearchMask                   = 1,XML_FILE_INPUT
< TRN_FIELDS >
    KEY1                             = !DOCUMENT/DOCSET/KEY1
    KEY2                             = !DOCUMENT/DOCSET/KEY2
    KEYID                            = !DOCUMENT/DOCSET/TRANSACTIONID
< TRN_FILE >
    BinaryExt                          = N
    MaxExtRecLen                  = 3000
    TRNRECFMT                     = StatusCode,EventStatus,EventCode
XMLTrnFields                      = Yes
< XML_IMP_EXP >
    AppendedExport                = Yes
    Ext                                   = XML
    Path                                 = /scratch/oracle/app/documaker12/ormb/import/
    SuppressDlg                     = Yes
< XMLTags2GVM >
    KEY1                          = KEY1,req
    KEY2                          = KEY2,req
    KEYID                         = transactionId,req
our AFGJOB,JDT file has these rules:
<Base Form Set Rules>
;NoGenTrnTransactionProc;;required to combine gentrn/gendata into single step;
;XMLFileExtract;2;SCH=1,XML_FILE_INPUT 16,85;
;BuildFormList;;;
/* ;ImportXMLFile;;SCH=1,XML_FILE_INPUT 16,85; */
;RunTriggers;2;;
;ResetOvFlw;2;;
;UpdatePOLFile;2;;
/* ;ReSetDocSetNames;;;
/* ;LoadRcpTbl;;;
/* ;RunSetRcpTbl;;;
;PrintFormset;2;required to combine gendata/genprint into single step;
/* ;RulSortFormSet;;; */
/*;WriteRCBFiles;;; */
;WriteOutput;;;
;WriteNaFile;;;
;ProcessQueue;;PostPaginationQueue;
;BatchingByRecipINI;;;
;PaginateAndPropogate;;;
;FormDescription;;;
;CheckZeroFontID;;E;
Could there be other reasons as to why the XML file could not be loaded/read?
We are running Documaker on a Linux server.

Communication error with Epson Stylus C63 with Airport Express

I have a brandnew iMac running 10.5.2. Set up my Airport Express and got the wifi to work in the house. Now I am dealing with remote printing. Printer is plugged into the port on the Airport Express, I see it in the Printer tab of Aiport Utility, I see it in the printer dialogue... but whenever I print I get "communication error with printer". I have unplugged the Airport Express, restarted computers, to no avail.
What am I missing?? Thanks in advance for any tips.
-Joanna

I solved this problem! After lots of searching I ended up at http://discussions.apple.com/thread.jspa?messageID=5692363 Printer setup utility in Leopard which gave the tip to reset the printing system... I did, and then somehow the Epson printer showed up as a Bonjour printer (which I had tried to do in the Airport utility but it would not let me because the name was too short or something strange like that). PageSender Fax showed up also and I just printed a document remotely...
Hope this helps someone else.

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome. Extra large font sizes and weird formatting issues only when printing emails from Gmail within Chrome. No problems when printing the same email from Gmail+Internet Exolorer or Thunderbird. Using the IE Tab extension in Chrome prints the email correctly but the style of Gmail's message window is completely weird ie: formatting bar is spread out vertically instead of horizontally. I believe it is clear that this is an application specific issue between the HP LASERJET CP1525nw printer and Google Chrome + Gmail. This printing scenario does not occur when printing anything else or when printing via another printer. I would appreciate receiving any suggestions to solve this issue.
OS: Windows 7 Ultimate x64
Browser: Google Chrome 15
HP Print driver: HP Universal Print Driver for Windows PCL6 v5.4.0
Printer is connected by WiFi to 4 computers

Hi AbZu,
You need to contact Google Chromes technical support as this is only an issue with Chrome. You have indicated that the printer functions correctly everywhere else. Check out the link below for Google Chrome technical support. Let me know if you need additional assistance?
http://support.google.com/chrome/?hl=en
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

I am using Firefox 11 and I am unable to print web pages. I can print PDFs ok. I tried to open the prefs.js file to delete anything that starts with print and I get an error message.

I cannot print web pages. I've tried the solutions suggested like deleting anything that starts with print in the prefs.js file but I get an error message: Script: c:\users\rick\appdata\roading\mozilla\firefox\profiles\iviwh5c1.default\prefs.js
line: 1
Char: 1
Error: invalid character
code: 800A03F6
Source: Microsoft JScript compilation error

When editing '''prefs.js''' you need to use a simple text editor program. WinXP Notepad messes up the line formatting of prefs.js, so I use Wordpad - but you need to save the edited file in a Text-Only format (Wordpad asks about that when you go to save the edited file). I never used Win7, so I don't know if that version of Notepad messes with the line formatting of prefs.js or not.
Another thing - make sure '''''"Hide extensions for known file types"''''' is de-delected in Windows file / folder options > view -> advanced settings. Otherwise Windows may add a .txt file extension that you won't be able to see, and that will break that file in Firefox. '''prefs.js.txt''' won't be recognized by Firefox, when is expecting to find '''''prefs.js''''' .

Error With Export/Print from Crystal Report Viewer

Hello there,
I've searched through the web and SAP discussion boards with not much luck with this issue.
After working through this for some days now I've decided to look here for help.
Environment:
I have created a web Crystal Report viewer application(Developed with SBOP BI Platform 4.0 SP06 .NET SDK Runtime) that communicates with a managed Cyrstal Server 2011 SP4 (Product 14.0)
I am able to connect and authenticate with the server, retrieve a token for communication and display reports in the Crystal report Viewer successfully.
Problem:
When I attempt to export, I receive the prompt to select format and pages.
When I click export after selections most times I receive an error with the text
Unable to cast COM object of type 'System.__ComObject' to interface type 'CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{74EEBC42-6C5D-11D3-9172-00902741EE7C}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
Other times the page simply refreshes on export.
When I click to print, no print dialog is displayed the page always refreshes and no error is displayed.
No Print or Export document is ever created.
As many print/export issues seems to be related, I'm guessing this two issues are as well.
Notes:
I am utilizing the ReportClientDocument model
I am storing this in session to use as the crystal report viewer report source on postbacks
I am assigning a subset of export formats to the crystal report viewer
I am setting particular parameters as well on the report source
At this point I would appreciate every assistance I may receive on this issue
Thanks in advance,
Below is the pertinent code
Code:
<aspx>
   <CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
   AutoDataBind="true" EnableDatabaseLogonPrompt="False"
   BestFitPage="False" ReuseParameterValuesOnRefresh="True"
CssClass="reportFrame" Height="1000px" Width="1100px" EnableDrillDown="False"
ToolPanelView="None" PrintMode="Pdf"/>
<Codebehind>
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using CrystalDecisions.Enterprise;
using CrystalDecisions.ReportAppServer.ClientDoc;
using CrystalDecisions.ReportAppServer.CommonObjectModel;
using CrystalDecisions.ReportAppServer.Controllers;
using CrystalDecisions.ReportAppServer.DataDefModel;
using CrystalDecisions.ReportAppServer.ReportDefModel;
using CrystalDecisions.Shared;
namespace ClassicInternalReportPage
    public partial class Reports : System.Web.UI.Page
        protected override void OnInit(EventArgs e)
            base.OnInit(e);
            if (!String.IsNullOrEmpty(Convert.ToString(Session["LogonToken"])) && !IsPostBack)
                SessionMgr sessionMgr = new SessionMgr();
                EnterpriseSession enterpriseSession = sessionMgr.LogonWithToken(Session["LogonToken"].ToString());
                EnterpriseService reportService = enterpriseSession.GetService("RASReportFactory");
                InfoStore infoStore = new InfoStore(enterpriseSession.GetService("InfoStore"));
                if (reportService != null)
                    string queryString = String.Format("Select SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS "
                       + "Where SI_PROGID='CrystalEnterprise.Report' "
                       + "And SI_ID = {0} "
                       + "And SI_INSTANCE = 0", Request.QueryString["rId"]);
                    InfoObjects infoObjects = infoStore.Query(queryString);
                    ReportAppFactory reportFactory = (ReportAppFactory)reportService.Interface;
                    if (infoObjects != null && infoObjects.Count > 0)
                        ISCDReportClientDocument reportSource = reportFactory.OpenDocument(infoObjects[1].ID, 0);
                        Session["ReportClDocument"] = AssignReportParameters(reportSource) ? reportSource : null;
                        CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
                        CrystalReportViewer1.DataBind();
            //Viewer options
            // Don't enable prompting for Live and Custom
            CrystalReportViewer1.EnableParameterPrompt = !(Request.QueryString["t"] == "1" || Request.QueryString["t"] == "4");
            CrystalReportViewer1.HasToggleParameterPanelButton = CrystalReportViewer1.EnableParameterPrompt;
            CrystalReportViewer1.AllowedExportFormats = (int)(ViewerExportFormats.PdfFormat | ViewerExportFormats.ExcelFormat | ViewerExportFormats.XLSXFormat | ViewerExportFormats.CsvFormat);
        protected void Page_Load(object sender, EventArgs e)
            if (IsPostBack && CrystalReportViewer1.ReportSource == null)
                CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
                CrystalReportViewer1.DataBind();
        private bool AssignReportParameters(ISCDReportClientDocument reportSource)
            bool success = true;
            if (Request.QueryString["t"] == "1" || Request.QueryString["t"] == "2" || Request.QueryString["t"] == "4" )
                reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "STORE", Session["storeParam"]);
                if (Request.QueryString["t"] == "2")
                    reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "FromDate", Request.QueryString["fromdate"]);
                    reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "ToDate", Request.QueryString["todate"]);
            else if (Request.QueryString["t"] == "3")
                reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "SKU", Request.QueryString["sku"]);
            else
                //Unknown report type alert
                success = false;
            return success;

Thanks Don for your response,
I'm new to the SCN spaces and my content has been moved a couple of times already.
In response to your questions
The runtime is installed on the web application server, if by that you mean the machine hosting the created .NET SDK application.
My question was whether it was also required on the Crystal Server 2011 (I.E. the main enterprise server with CMS and Report management and I guess RAS and all that). I figured this would remain untouched and queries would simply be made against it to retrieve/view reports e.t.c
If install of the SDK on Crystal Server 2011 is indeed required should I expect any interruption to any of the core services after a restart. I.E. I'm hoping that none of the SDK objects would interfere with the existing server objects (in SAP Business Objects)Reason I ask is I note that much of the SDK install directories are similar to the existing Crystal Enterprise Server 2011 (Product 14.0.0)
Is this temp folder to be manually created/configured or is it created by the application automatically to perform tasks. Or are you referring to the default C:\Windows\Temp directory and so saying that the application would try to use this for print and export tasks?Once I'm sure which I'd give the app pool user permission
Printing is to be client side but I figured by default (with the Crystal Report Viewer) it would simply pool and print from the user's printer. This is how it works with the previously used URL reporting approach (viewrpt.cwr). Therefore a user can print the document from wherever they are with their own printer.We don't intend on printing from the server machine, but are you suggesting that a printer must be installed on server (which one web or enterprise server) for any client side printing to work.
App pool is running in 32 bit mode
Initially didn't get anything useful from fiddler but I'd try and look closer on your suggestion.
It's also possible that some of my questions are a misunderstanding of APP vs RAS vs WEB, so please feel free to clarify. Currently I see the Web server as simply the created .NET SDK Application and RAS (Crystal Server 2011 e.t.c) as the existing fully established Application server which I simply pool for information.
Thank you for your patience and advice,

"ink system failure" error with code oxc19e0023 on a HP Photosmart Premium All-in-One Printer - C309

"ink system failure" error with code oxc19e0023 on have a HP Photosmart Premium All-in-One Printer - C309g - Have done all the resets and reseated the ink also tried replacing ink with new HP carts..getting frustrated please help
This question was solved.
View Solution.

Have you tried the steps outlined in this article:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
If not give the steps a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Error with printer

Similar Messages

Maybe you are looking for