Error with regard to Compounding in Master Data

Hi All,
I am having a problem with a Master Data Info Object. I am actually adding a Compounding attribute to the Master Data Info Object. But when i am activating it is giving an error message "Concatenated values used in documents for master data". I am having no clue on this. Please help me put on this issue.
I gaurantee full points to the answer(s) which help me resolve this.
Thanks in advance,
Sudeep.

Hi,
Kindly check if you have created any documents for the master data infoobject(ZDEPTID),or the compounding attribute(ZSETID).
If so..first delete the documents.
Activate the infoobject and then create the document once again.
Assign points if this helps!
Regards,
Dhanya

Similar Messages

  • I have downloaded the latest version of icloud control panel to a PC with Windows 7. My "master" data is always on my PC. With other synch software I always select "One Way Outlook to Device". I synched icloud with Outlook and it has trashed my Outlook

    I have downloaded the latest version of icloud control panel to a PC with Windows 7. My "master" data is always on my PC. With other synch software I always select "One Way Outlook to Device". I synched icloud with Outlook and it has trashed my Outlook with duplicate contacts. Is there a solution. Is there selective synchronisation available?

    Make sure you don't have any notes that have no content or subject or this can prevent syncing with Outlook.  If you do, delete them.
    If you don't, try unchecking "Mail,Contacts,Calendars & Tasks with Outlook" on the iCloud control panel for Windows, choose Delete at the prompt (the data will still be in iCloud), restart your PC, then go back and check this setting again.  (Your iCloud data will reappear in Outlook after a brief delay as it redownloads.)
    Then create a new note on one of your iOS devices and see if it appears in the Notes folder in Outlook mail after a few minutes.

  • BI 7.0 : Error in loading text of a Master Data with a data source time dep

    I have a problem loading text from the data source(time dep) to the Master Data.
    For instance if the Data Source 0EVALGROUP1_TEXT is time dependent as there are the fields DATETO and DATEFROM, while i create the transformation these 2 fileds does not have any target fields. After i create the infopackage and execute it to load into the PSA, i have a error message : the message says "An error occurred in the source system."and "The error occurred in Extractor "; and the PSA is empty.
    Can anyone tell me if there is an OSS note to apply for this kind of problem, actually we are running under SAPKW70015 SAP_BW.
    Thanks for your help.

    Hi,
    Pl try the below
    The l_dta data target that you want to load is an InfoObject (master data or text
    table).
    You must declare this for the InfoProvider in Transaction RSD1.
    You do this on the 'Master Data/Text' tab by assigning any InfoArea to the InfoObject.
    The InfoProvider (that is, this InfoObject) is then displayed below this InfoArea in
    the InfoProvider tree.
    Rregards,
    Senthil

  • Regarding the Time dependent master data error

    Hi Masters,
            I've loaded the time dependent master data from flat file only two fields. When I checked that corresponding characteristics in maintain master data, that contains by default from date 01.01.2007and to date 31.12.9999 this date also. Could you please help me to rectify this error.
    Thanks in advance
    Raja.S

    Hi Antonino La Vela
          I have 2 Project Manger and in different duration for different project.
    Following datas are my data in Excel sheet.
    PM Name                    To date             From Date           Costcenter
    Ragunath                    01.09.2007        01.06.2006           Project name1
    Ramana mani              01.02.2008         02.09.2007          Project name2
    while loading above data, I'm getting following data in maintain master data
    PM name                   To Date             From Date           Costcenter
                                     31.12.9999         01.01.1000
    Ragunath                   31.05.2007         01.01.1000
    Ragunath                   01.09.2007         01.06.2007            Project Name1
    Ragunath                   31.12.9999         02.09.2007 
    Ramana mani             01.09.2007          01.01.1000
    Raman mani               01.02.2008          02.09.2007           Project Name2
    Raman mani               31.12.9999           02.02.2008   
    Could you please help me, how this unnecessary datas are loaded by default?
    Thanks in Advance
    Raja.S

  • Error when executing a query on master data

    Hi Friends,
    When I execute a query fon Master Data Characteristic infoObject ( 0BPARTNER ) from BEx Analyzer I got the below error. 0BPARTNER contains 15 attributes. I am getting the below error only for this query. Rest all other queries are working good with the same BEx Analyzer.
    <b>An error occured in the communication with the BW Server.
    Due to this connection has to be closed.</b>
    <b>Detailed Description:
    The system is configured incorrectly.</b>
    Please tell me what could be the problem? How to overcome this?
    Thanks,
    Sasi

    Hi Arun,
    Before the execution of query I did that. And it was ' Query is Correct'.
    Any more ideas?
    Thanks,
    Sasi.

  • Error when import a business partner master data

    Dear Colleagues,
    When i want to import a business partner master data using Data Transfer Workbench, i got an error "Account receivable/payable is missing [OCRD.DebPayAcct] Application-defined or object defined error65171". What is happened?
    Best Regards,
    Jimmy

    Hi Jimmy........
    Welcome to SAP Business One Forum.........
    In order to solve this kind of error you have to map Debtors and Creditors account in Administration> Setup> Financials> GL Account Determination> Sale and Purchase Tab.
    Also One more important thing you have to map Bank Setup also in Administration>System Initialization> Company Details> Basic Initialization Tab> House Bank Setup......
    Regards,
    Rahul

  • DTP error: Lock NOT set for: Loading master data attributes

    Hi,
    I have a custom datasource from ECC which loads into 0CUST_SALES.  I'm using DTP & transformation which has worked for loading data in the past for this infoobject.  The infopackage loads with a green status but when i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes".  I've tried reactivating everything but it didn't help. Does anyone know what this error means? We're on SP7.   Thanks in advance!

    Hello Catherine
    I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
    The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
    Fix#2: by a faster server (by faster, I mean more CPU power)
    Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
    Good luck!
    Ioan

  • Aggregates with Attribute Change Run and Master data

    Hi !
    I created Aggregate which includes Master Data such as Customer , Customer Number , Material , Material Number.....
    It also contains navigational attribute and hierarchy...
    Now we all know that if Master data and Hierarchy changes frequently(or some new values are added or new attributes are added etc.) we want to see the respective change in Aggregates too
    So just Rolling up aggregate will not help.
    We need to apply Attribute Change run for this purpose, to aggregates..
    Now the question is HOW TO  APPLY ATTRIBUTE CHANGE RUN to aggregates?
    How to automate this process with Process chains..?
    If i create Aggregate on Master Data CUSTOMER NO., DOES IT AUTOMATICALLY INCLUDE THAT AGGREGATE IN ATTRIBUTE CHANGE RUN FOR THAT CUSTOMER NO. PROCESS CHAINS ?   Yes or No..........
    (What i mean to say is if there is Attribute Change Run for Customer No. and if this is in Process chains specially created for Customer Number , than as aggregates are created on  Customer No., does i t automatically applies and make changes to Aggregate too, or do we hvae to create special process chian for it ?)
    Please reply asap ? its urgent

    hi,
    check these links for attribute change run
    What's the attribute change run? and the common sequence of a process chain
    http://help.sap.com/saphelp_bw30b/helpdata/en/80/1a67ece07211d2acb80000e829fbfe/content.htm
    regards
    harikrishna N

  • Error in Process Chain while loading Master data text?

    Hello All
    Having a Process chain and having 5 infopackages(Master data Attri & text)with FULL LOAD with an processing options as PSA and Infobject.In this one of the infopackage failed and the status is in red colour,and when I right clicked there is no <b>repeat</b> option?Now <b>how to run this process</b>?
    Heard that v can restart the process in debug screen?can anyone let me know how to do this?
    Many Thanks
    balaji

    Hi dear,
    you don't find the repeat option because this is a full load...I think you can easily restart the entire PC (or loading directly the failed infopackage from RSA1), because full loads for master data don't cause any data duplication !
    Hope it helps!
    Bye,
    Roberto

  • Problems with HowTo "Creation of BI Master Data in Integrated Planning...)

    Hi,
    one of our customers need a planning application in which he can create master data for different attributes, insert some key figures for this attributes and changes already planned key figured.
    For the last two point I've already found a working solution, the first point (creating of masterdata in web template) is still a problem. After a little search, I found a howto-guide "Creation of BI Master Data in Integrated Planning (IP) through Web Layouts", in which the necessary steps are described, how to do this (please see following link: http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/607193d5-cdd5-2b10-c699-8ff04c3124f6)
    Does anyone of you know this guide and was able to build a working solution?
    I have different questions, maybe you could help me:
    - what kind of variable is he using?
    - do I need a DataProvider in Web Template?
    - how do I get the connection to the used variable in the button group?
    Thanks for your help.
    Regards
    Tim

    Hi Timo,
    you require two howtos to implement the solution.
    First, please take a look at the first document:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d2b273-0e12-2c10-fab3-a34bde559f92?QuickLink=index&…
    In chapter 3 you see the prerequisites (note 1101726 and notes 1384495, 1387004 and 136772). By this, you change the system behaviour, not to check if the new inserted master data is valid (it can't be valid, because the entries are new!)
    And after this please implement the solution from the how to.
    Furthermore you can take a look at this how to, which might help you too:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607193d5-cdd5-2b10-c699-8ff04c3124f6?QuickLink=index&…
    Even if my first post is a bit old, my customer still uses this solution, at the moment we are on 7.3 sp06, so it is working in newer releases too.
    Hope this helps.
    Regards
    Tim

  • Error With regard to occurred in the ABAP program "J_1IRUTZ" - J2iu

    Dear All,
    This is with regard to ECC 6.0, when running this transcation J2IU , i am getting this following Error.
    "J_1IRUTZ" - in "FILL_PAYABLE_AMOUNT"
      The main program was "J_1IRUTZ ".
    If any one has come across this Issue please do let me know.
    regards,
    sgs.

    HI
    I am also facing the same issue with J2iu tcode. Can you please suggest if we need to use monthly utilization code - J2IUN and also please elaborate your answer regarding code change for rem balance.
    It will be really appreciable if you can explain how it got resolved.
    Regards
    Mukta

  • Regarding the activation of Master data  in production

    Hi All,
                When we activate master data info objects in production system , why the transport request appear . And what is the purpose of that transport request.
    Regards,
    Aditya

    Ask ur basis team to lock the system as its there in open right now...
    When ever the system is open it try to capture the all the changes thru the req.. which is why u are getting this....
    So contact the basis team for the same..
    Thanks
    Vishnu

  • Hello Creative Cloud Illustrator Community. Help Please! This is with regard to compound paths and transparencies. I have set some type on a circle and then created outlines. I then placed the outlined type on a black stroked ring which I then selected "o

    Hello Creative Cloud Illustrator Community:
    Help Please!
    This is with regard to creating a compound path:
    I have set some white type on a circle and then created outlines. I then placed the outlined type on a black stroked ring which I then selected "outlined stroke." I then put both "outlined" graphical elements on a separate solid bkg. (all 3 are on the same layer). Lastly, I then selected the top two elements and went to "make" a "compound path" (because I want the type to be the "holes" so I can see through to the background). However, the only effect I get is the white outlined type turning black (the same color as the black ring). What am i doing wrong? I can achieve the desired result with simple boxes but it won't work with a circular type path, a stroked ring and a solid bkg.
    Any help on this would be greatly appreciated!
    Thank You!

    Thanks for the response Jacob.
    Unfortunately, I tried your suggestion with no success. BTW, minus front is now Subtract. Apparently, by clicking option>subtract, it works in the same way as minus front. I tried this to no avail.
    Let me reiterate please.
    I have 3 graphic elements-all on the same layer:
    1. Background: Gold circle with a fill and no stroke.
    2. Middle: Black ring (Stroked) inside gold background circle.
    3. Top: White copy set on a circular type path and placed directly on top of middle black ring.
    Both the middle black ring and top type path HAVE BEEN CONVERTED TO OUTLINES.
    LASTLY, I select the Middle and Top, go to Compound Paths and choose "Make" and my white copy turns to black. Wrong!
    WHAT I WANT TO HAPPEN: I want the white copy to become HOLES, so the GOLD background shows through.
    Any solutions would be very much appreciated!

  • How can I edit iCal server addresses in Mountain Lion? I keep getting an error with regards to my google calendar and I understand that the way to fix the problem is adjust the server address, but I cannot access it because the preferences are restrictive

    How can I edit iCal server addresses in Mountain Lion?
    I keep getting an error message with my google calendar, and I heard that if I delete the extra slash at the end of the address the problem will be fixed. But the iCal account preferences take me to system preferences > accounts every time I want to edit the account.
    Does anyone know where I can edit the server address?

    You should ask in the iCloud forum, this is for iMacs. https://discussions.apple.com/community/icloud/icloud_on_my_mac

  • Master Data Activation on BW on HANA

    Hi all,
    I just wanted to check what really happens in the background with regards to Activation of Master Data when using BW on HANA ?
    I have seen some information saying that you no longer need to activate Master Data when using BW on HANA(BOH), but how else do changes to Master data get seen if you don't activate them.
    Is locking on Master data an issues when using HANA, when multiple users are trying to update the same Master Data ?
    Thanking you in advance for your feedback.
    Regards,
    Noel.

    Hi Noel Horkan
    That piece of information seems to be quite new.
    If possible, could you please share the document or link where you have seen that.
    As of my knowledge, it's important and necessary to activate masterdata/attributes even to enable the latest features like 'Automatic Generation of HANA views'.
    BR
    Prabhith

Maybe you are looking for