Error with replicating materials from ERP to CRM 7.0

Hi experts!
After dump (No PXA storage space available at the moment) materials are not replicated from ERP to CRM.
In transaction R3AC1 there are no filters for object MATERIAL.
Replication is managed by transactions R3AR2-R3AR4 with parameters MARA-MATNR.
In transaction SMW01 the status of incoming for material BDOC is green.
But in the bottom of status bar there are some messages appears when clicking the buttons u201CShow BDOC message classic datau201D and u201CShow BDOC message extended datau201D correspondingly:
u2022 No classic data for BDoc message ХХХХХХХ found.
u2022 No extended data for BDoc message ХХХХХХХ found.
The table COMM_PRODUCT is empty.
Can anyone help me ?
Kostya Khveshchenik.

HI Julian,
I have exactly the same issue please would you let me know the solution to fix this issue.
Will really appreciate if you can respond to this asap.
Regards
Shashidhar

Similar Messages

Errors while replicating Materials from ECC to SRM

Hi All,
I am trying to replicate materials from R/3 to SRM, in SMQ2 of SRM, the status of MATERIAL is still in yellow colour. when i checked in SMW01 tcode, the error is "Category for material group 013 does not exist" where as in R/3 also we dont have any material group as 013.
All the Prod type & Prod category have been replicated into SRM from R/3.
And no materials have copied in SRM.
how to resolve this ?
regds,
CB
Edited by: Channabasappa.K on Feb 17, 2011 10:30 AM

Hi,
DNL_CUST_PROD0 & DNL_CUST_PROD1 were in green colour now,
DNL_CUST_BASIS3 is in yellow colour & i saw in some doc that DNL_CUST_BASIS3 is not reqd from SRM7.0 onwards.
when i try to replicate MATERIAL, in SMQ2 i am getting status as SYSFAIL & after double clicking on that i got a pop up as "Error in Mapping (Details: transaction SMW01)"
Upon checking in SMW01 i got the above errors as
" Category for material group 013 does not exist
Message no. COM_PRODUCT_API002
Diagnosis
If material groups are used in the SAP system, they must exist as categories in CRM/EBP before you import materials. When Customizing object DNL_CUST_PROD1 is imported, the material groups are imported automatically and created in the category hierarchy R3MATCLASS (material group).
Procedure
Check whether the material groups have been imported successfully and exist as categories.
Proceed
If necessary, import the Customizing object DNL_CUST_PROD1"
Like this its showing 19 material groups and all these 19 mat groups were not present in ECC.
Regds,
CB

Error in segment COMM_PR_SHTEXT when downloading products from ERP to CRM

Hi experts
I get below error when downloading materials from ERP to CRM.
"Data for set COMM_PR_SHTEXT may only be changed in the original system Q10CLNT310" But the material and the short texts has been created in ERP, hence I can't change them in CRM. When I look in table COMM_PRODUCT field LOGSYS has value 'Q01CLNT300' which is our ERP system. So as far as I see it, our original system is Q01CLNT300 and not Q10CLNT310 as it says in the errormessage. The result is that the sales org data we are trying to download to CRM are not downloaded.
Can you help me on this one?
Best regards
Jørgen Jensen

Hello Jørgen ,
Q10CLNT310 --> Is this you old ERP system?
One possibility for this error would be some product related tables contain the wrong LOGSYS value i,e Q10CLNT310.
Also,check LOGSYS for table COMM_PRSHTEXT.
This generally happens when data has been copied by means of client copy , and you do not run txn:BDLS.
In txn:BDLS ,you can change the LOGSYS for a particular table or all relevant tables.
You can execute in in Test mode, to check the affected tables.
Hope this helps!
Best Regards,
Shanthala Kudva.

How to load prices from ERP to CRM

Dear All,
I'm trying to download product prices, customer specific prices and customer specific discounts from ERP 6.0 EHP5 system to CRM 7.0 EHP1. RFC connection works, I'm transferring customers to ERP by middleware. Also I've done initial load of materials from ERP to CRM. Problem is with prices. I did initial loads of: DNL_CUST_PRICE without errors, but prices are still not available in CRM WebUI. What is the next step?
Could you provide any instruction or SAP note?
thanks in advance,
regards

Hello,
Before talking further about Web UI, first check whether condition records exist in CRM tables.
Also, check in table COMM_PRODUCT and BUT000 that whether Product and BP exist.
If yes, then if you are telling that there are 3 entries in CRM table for the same BP and Product,
then check mapping table CND_MAPM_CNV_REC for SOURCE_ID fields. Make sure, you have the correct
LOGSYS in this table for KNUMH-VARNUMH mapping.
If there are more than one SOURCE_ID present in this table, then chances of duplication is possible in condition tables.
You can also refer logs using txn CND_MAP_LOG_DISPLAY
Object: COND_EXCHANGE
Sub-object : CONDITIONS
And give 'from' 'to' correctly, to get the correct logs.
Hope this helps!
Best Regards,
Shanthala Kudva.

Replicating BPs from ECC to CRM- Error IN SMQ2 as Stop.

Hello Gurus,
I am facing problem in replicating BPs from ECC to CRM. After initial load , when monitoring the In bound Q in transaction SMQ2 it is showing status as Stop.
Kindly let me the possible solution to remove the status.
Cheers
Prashant Ranalkar

Hi,
If you double-click on the queue that is in stop status (so, step one when you have your list of queues, double-click on the one that is in error state, this will give you a one-line entry, then double-click this one line again, and it will give you a detailed view of what is held within that queue), it will give you more information and may have a line in it that is causing the error. This tends to give you more info on why it is in stop status (we have had wide, varied and some weird ones in here!) - most of the time you fix it by just deleting that line that has the error associated with it. then you just go back one level to the queue 'header' and click on the unlock queue button and it should process.
Hope this helps
Regards
Cara

Data transfer ship-to party from ERP to CRM with role ship-to

We currently have an ERP system and we want to transfer the various customers to CRM but with different roles e.g. we want the ship-to accounts (account group 0002 in ERP) to be created with a role of ship-to in CRM. When we transfer the data at the moment, all accounts are being created in CRM with the role of sold-to.
Does anyone know if this is possible and if so, how?

Hi Johan,
Thank you for your helpful response. Once we have done the initial transfer of data from ERP to CRM, we want the CRM system to be the master system for creating customer records. However, we will create some customers with a role of ship-to in CRM and we want to these to be transferred to CRM with an account group for ship-to customers. Do you know if this is possible?
Regards
Helen

Problems in replicating plants from ERP

Hello Experts,
In the process of setting up SRM 7.0 system, We are running into some problems while replicating plants from ERP.
1. BBP_LOCATIONS_GET_FROM_SYSTEM takes a very long time to execute.
2. I can see few plants replicated in BBP_LOCMAP table, but when I search for locations in the org structure, it says no values found.
3. I used the BP number in the BBP_LOCMAP table and searched for business partner details in BP trxn, even there it shows BP number does not exist.
If anyone has encountered similar problems please throw some light in resolving these issues.
Thanks, AV

Hi Muthu,
The program is going in endless loop because there was some memory dump in ERP. We have resolved the issue and have successful in running the program, but In SLG1 there are errors -
1. Business Partner "0000000x" does not exist
2. Error Changing Location.
Somehow the plant entries are shown in BBPLOCMAP tables with the BP numbers even though system is not generating the business partner numbers.
I am guessing problem might be with the business partner number ranges, but I have checked everything and couldn't find any issue there either.
Did I miss anything else?
Thanks, AV

How to read and display table data entries from ERP in CRM

Hello experts,
I am new to CRM. I need to read data base entries from ERP in CRM system. What would be the best way to do . The table is a standard SAP table with a custom include (several customer fields). Calling a web service would be the best way..? or is there any other way that I can do it too.
Also, to display these entries what would be the best tool? Should I built my own transaction/report to do it?
Any advise or guidance would be a great kick start to learn the CRM development environment.
Regards,
jaffery

Hi,
Check the below wiki link if it helps.
http://wiki.sdn.sap.com/wiki/display/CRM/Howtodisplayaz-tableinanassignmentblock
Also, you can try an option of transaction launcher.
Hope this helps.
Regards,
Chandrakant

Replication of bp name field from ERP to CRM

Hi experts,
We have a problem in ERP to CRM master data replication.
We have already connected our ERP (ECC 5.0) system to CRM 7.0.
We have made initial master business partners (bp) data load from ERP to CRM without problems.
All bp fields, including NAME (but000-name_org1) are transfered correct from ERP (KNA1-NAME1) to CRM.
We have a z program in ERP that is used by users to change the customers names (KNA1-name1).
When we use our custom program in ERP to change the kna1-name1 field in ERP, the bp name field is not changes in CRM.
Using XD02 or FD02 in ERP to change the name (kna1-name1) field in ERP the replication of this field to CRM is correct.
KNA1 table is updated correctly in ERP using our custom program .
What does transactions XD02 and FD02 has that make name filed replicated in CRM?
Thanks in advanced.

Hi,
First variant:
You have to retry load business partners by request:
Tcode R3AR4, R3AR2, R3AR3
So, system retrive new data from tables and transfer to CRM.
Second variant:
You have to add to your z-program part, there you fill data in the CRM system also (via RFC).
Denis.

How to Export Materials from ERP to MDM 7.1 via MDMGX?

Hello MDM-Experts,
as described in the Scenario Configuration Guide for MDM 7.1, we want to initialize our MDM repository with reference data (material) using XML-Files. Therefore, we have imported the fiel "71110_MATERIAL.a2a" in our repository. Now we want to fill it with the materials from out ERP-System without using PI/Xi.
We tested the transaction MDMGX in our ERP-System and are able to extract products and articles, but not materials (table mara). We also checked the document "How to configure MDM Reference Data Extraction", but found no solution for material. Could anyoune help?
Thanks & best regards
Matthias

Hi Matthias,
we recommend using PI as we have some XSLT mappings running on PI that you cannot use (easily) w/o PI. Additionally PI takes care of the correct routing from ERP to MDM.
Nevertheless a possible (but not recommended) way w/o PI would be via ALE and XML files. You can configure an ALE port in a way that it creates an XML file using the IDoc structure (see [SAP Help|http://help.sap.com/saphelp_erp60_sp/helpdata/EN/3f/faa288bb7911d2897f0000e8216438/content.htm]. ALE then places the file in the file directory of the application server instead of sending it via the IDoc Adapter to PI.
Best regards
Michael

Error while transferring materials from R/3 to APO

I am getting an error while transferring materials from R/3 to APO , the error is on the SCM side and its "NOEXEC" , the inbound queue has been blocked . what might be the problem

Hi Raj,
I think that you have RFC problems, you need to check this with your basis team, i give you a thread that talks about the same problem.
Regards.
Marí

Error while Replicating Objects from R/3 to CRM

Hi,
While replicating objects from R/3 to CRM (Tcode :R3AS), the status of the object is still running. When I checked in Outbound queue (Tcode:SMQ1) the status is 'SYSFAIL', when I double clicked it says "Password logon no longer possible - too many attempts". So what is the solution to it...
I am working on CRM 5.0
Regards,
vimal

Dear Vimal,
Sorry not sure then...
Sometimes the RFC connection is refused and use to give that particular error messgae due to:
The old RFC library having version 6.20 automatically converted the
password into uppercase with a size limit of 8 characters before sending it to the SAP system.
The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above.
So need to use upper case passwords when connecting to an SAP system having version less than 7.00.
But this is not valid in this scenario.
Thanks,
Atin

Error replicating materials from R/3 to SRM

I had to delete all materials from SRM master record to replicate agaim the materials object MATERIAL.
I have for my country one table CRMM_PR_TAX that contaim tax datas that comes with object MATERIAL during replication, after deletion I started the new replication and an error occurr:
Data cannot be maintained for set type CRMM_PR_TAX
Diagnosis
The data for a set can be maintained only if the product is assigned to a category to which the set type is assigned
Procedure
Check whether the product is assigned to a category that allows the set
Please someone knows can I chect it and configur agaim.
Thanks
Nilson

Hi
Please go through the links below ->
Note 1039863 - COD Performance : Problem with table CRMM_PR_TAX
Set_types - Replication from Backend to SRM
/people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
Set type 380BDF7B502D63F7E10000009B38FA0B does not exist
Note 381051 - Leasing: Category not found financing
Re: Mandatory set types
importnace of set type in comm_hierarchy transaction
Hope this will definitely help. Do let me know.
Regards
- Atul

Error when replicating materials

Hi,
We are on SRM_SERVER 500 (SRM 5.0), Support pack SAPKIBKT06.
When replicating materials - we faced the following error.
In SMQ2 we get an error message - SYSFAIL - Error in Mapping (Details: transaction SMW01)
In SMW01 I am able to see some error messages -
No product ID determined for material number P2P SUPPLIES of logical system P2PCLNT100
But we have created the product P2P SUPPLIES in the R/3 system.
Can someone explain what needs to be done?
Thanks,
Srivatsan

Hi
Please go through the SAP OSS Notes ->
Note 656823 FAQ: Tips and tricks for transfer debugging
Note 1049166 Memory consumption in BDoc inbound processing too high
Note 916547 Problems with language fields in MDMP R/3 backend systems
Note 916708 Problems with language fields in MDMP R/3 back-end systems
Note 429423 CRM Release: General analysis of the initial Load
Note 928465 ISUCRM: Hanging entries in inbound queue SMQ2
Note 441352 OPEN-FI event 00501015 is executed unintentionally
Note 891889 ISUCRM: SYSFAIL during replication after product change
Note 721107 Correcting delivery and billing status in the CRM system
Note 510192 Meaning and maintenance of the CRMRFCPAR table
Note 537821 RFC dest. <ENTER MIDDLEWARE DESTINATION> does not exist
Note 543999 Assignment between adapter object and application component
Note 309734 CRM/EBP server: General analysis of initial load
Note 378580 incorrect sorting in SMO8_LOG_FLASH
Note 489215 CRM 3.0: Queues are blocked
Note 571486 After import of support packages: R3AD queues hang
Note 309734 CRM/EBP server: General analysis of initial load
Hope this will help. Do let me know.
Regards
- Atul

Non-serialized products from ERP to CRM Ibase

Hello SDN community,
currently I am working with CRM 2007 and ERP 6.0.
I am trying to find a solution for the following scenario:
I create a Sales Order in ERP with configurable & non-serialized materials.
I want to bring exactly this materials including configuration into the CRM IBase automatically during the SalesOrder process
(very similar to the SAP standard equipment approach). Is there a SAP standard way???
I already know how this works for serialized materials (aka equipments) and I debugged the
system (especially function group IB_CRM_API with all its FMs) but I cannot find a really easy, straight forward
approach to accomplish my solution...
I have several options in my mind, but what would be the best one?
1) create my own bdoc (I could not find an standard one) for non-serialized product similar to EQUIMPENT / EQUI_CONFIG and attach it to the same Business Event?
2) enhance the SALESDOCUMENT bdoc regarding my approach!?
3) develope my own IDOC and send it to CRM and vice versa? (maybe less development than BDOC!)
4) develope a pseudo serialization for the product?!? (I do not want to do serialization at all, because this could cause XX million of Ibase records easily in production!)
Thanks for any help & suggestions!
Marco

Hi Jorgen,
what I could understand from the forum is that you have some problem with your filter conditions.
Hence forth, I would like to clarify the filter conditions and will try explain it to you how it works :
Case 1 :
In R3AC1 : Filter is VKORG : 1000
In R3AR2 : Filter is VKORG : 2000
On Request Download from R/3 to CRM, Data will get downloaded for the Request Filter.
Case 2 :
In R3AC1 : Filter is VKORG : 1000
                               KUNNR : 1000 - 2000
In R3AR2 : Filter is KUNNR : 1500 - 2500
On Request Download from R/3 to CRM, Data will get downloaded for KUNNR 1500 - 2500 with VKORG :1000 from R3AC1.
Case 3 :
In R3AC1 : Filter is VKORG : 1000
                               KUNNR : 1000 - 2000
In R3AR2 : Filter is VKORG : 2000
                               KUNNR : 1500 - 2500
On Request Download from R/3 to CRM, Data will get downloaded for KUNNR 1500 - 2500 with VKORG :2000 from R3AR2.
At the End of the Day, The filter works as follows :
1. SAME TABLE FIELD present in R3AC1 and R3AR2 :
Result : The filter conditions of request download will override the filter conditions of R3AC1.
2. DIFFERENT TABLE FILED present in R3AC1 and R3AR2 :
Result : The filter conditions of both R3AR2 and R3AC1 are considered and the data is filtered in the Request download. So , basically if the fields are different, THE AND condition is applied on the filter.
Hope You are clear with respect to filters now.
Thanks and Regards,
Vignesh Ravikumar

Error with replicating materials from ERP to CRM 7.0

Similar Messages

Maybe you are looking for