Error with sapstartsrv return code -1

Hello, i'm trying to install the preview and on step 2 it fails registering sapstartsrv, the error message is the following:
Execution of the command "C:\usr\sap\J2E\SCS01\exe\sapstartsrv.exe -r -q -p C:\usr\sap\J2E\SYS\profile\START_SCS01_WRODRIGUEZ -s J2E -n 01 -U WRODRIGUEZ\SAPServiceJ2E -P ******** -e WRODRIGUEZ\j2eadm" finished with return code -1. Output: Cannot register COM interface.
if i check window's event viewer, i see:
Cannot open Registry key HKEY_LOCAL_MACHINE\Software\SAP\J2E\Environment (Error 2 ENOENT*: No such file or directory OR: The system cannot find the file specified. ) [ntservmgr.cpp 264]
So i create those in the registry manually and still not working.
The WEIRDEST thing is that everytime i restart my computer i can see sapstartsrv service running...
PLEASE, can someone help??
thanks in advance.

sorry, something i forgot to say, when i go to control panel->event viewer, i can see the following error:
Cannot open Registry key HKEY_LOCAL_MACHIE\Software\SAP\J2E\Environment
I check the registry and i can see that the key doesn't exist, i create it manually and nothing happens, it keeps giving the same error. The thing is that i think installation program cannot create the key. I followed instructions from the post:
WAS 6.40 installation "sapstartsrv.exe' returned with '-1'."
And it didn't work for me.
Please, does anyone have any insight on this? i'd really like to install the preview...
thanks in advance

Similar Messages

Console error with GUI , return code -17

Hi All,
I have just finished the Installation of SAP IDES 4.7. Installation was sucessful, after that I Installed GUI 640. But when we are starting the Console it is starting without any error which also shows WP table details in run mode. When we logon to gui, console becomes "Yellow" and dispatch process stop with a return code -17.
Please help.
Thanks
Jagat.

Hi Kaushal,
Thanks for ur reply. Actually when we started the installation process, and GUI, we have not provide the loopback adapter in the Primary DNS, but Loopback Adapter was properly configured with IP.
Later on we realised and added the 127.0.0.1 in the Primary DNS. But its still not working.
The Log which u have asked for is attached.
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B
B Sat Mar 04 10:18:27 2000
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\TEK\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\TEK\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\TEK\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.112)
B New connection 0 created
M systemid   560 (PC with Windows NT)
M relno      6200
M patchlevel 0
M patchno    251
M intno      20020600
M pid        2792
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2792) [dpxxdisp.c   1016]
I MtxInit: -2 0 0
X
X Sat Mar 04 10:18:29 2000
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
C Got ORACLE_HOME=D:\oracle\ora81 from environment
C
C Sat Mar 04 10:18:30 2000
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPTEK's password
C Connecting as /@TEK on connection 0 ...
C Attaching to DB Server TEK (con_hdl=0,svchp=06A497E8,svrhp=06A495F4)
C
C Sat Mar 04 10:19:07 2000
C Starting user session (con_hdl=0,svchp=06A497E8,srvhp=06A495F4,usrhp=06A913AC)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c      3718]
C *** ERROR => CONNECT failed with sql error '1017'
[dboci.c      9536]
C Try to connect with default password
C Connecting as SAPTEK/<pwd>@TEK on connection 0 ...
C Starting user session (con_hdl=0,svchp=06A497E8,srvhp=06A495F4,usrhp=06A913AC)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c      3718]
C *** ERROR => CONNECT failed with sql error '1017'
[dboci.c      9536]
B ***LOG BY2=> sql error 1017   performing CON [dbsh#2 @ 962] [dbsh    0962 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#2 @ 962] [dbsh    0962 ]
B ***LOG BY2=> sql error 1017   performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   8277]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = -1
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    rfc_req = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server sapsrv_TEK_00 on host sapsrv (wp 0)
M * ERROR       tskh_init: db_connect
M *
M * TIME        Sat Mar 04 10:19:07 2000
M * RELEASE     620
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        8408
M * COUNTER     1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2792) [dpnttool.c   345]

How do you carry out an event if a job finishes with a return code 4?

Hi
A job which would complete successfully in SAP via the SM36 scheduler completes with an 'Error' in Redwood CPS because there are errors within the spool and it ends with a return code 4.
We don't want this to error in Redwood CPS, so we have set the return code mapping to Completed with entries of 0 and 4.
I.e. whether or not there is an error in the spool, the job will complete successfully in Redwood CPS.
However, we want to be alerted if there are errors in the spool.
How do we do this? The manual says "A job can raise one or more events when the job gets a specific job status or return code" - where is this set? I can see on the 'Event' tab of a job definition you can raise an Event when the job enters a specific status, but I only want to raise an event (or carry out a step / send an email etc) if I get a return code 4 (none of the job statuses are relevant) - how can I do this?
Thanks
Ross

Hi Anton
Thanks for that. However, it's a bit more complicated...
I have a job chain with 2 steps. Any one of the two steps can have an error in the spool which by default in Redwood CPS result in the job ending in status Error. I don't want this, as the second step should still run if the first step ran okay with with errors in the spool (but shouldn't run at all if the 1st step fails completely). I.e. setting 'on Error goto step 2' or having no dependancy at all is not what we want.
Therefore, I set the return code mapping on Completed to return codes 0 and 4. I.e. if step 1 has an error in the spool (return code 4) it still ends as 'Completed' and step 2 runs.
Our problem is that we want to be alerted if there is a return code 4 (error in the spool). I tried as you suggested by entering on the 'Raise Event' tab of the job chain to raise an event on status 'Error' with a return code of 4. But no event was raised. I think this is because the return code mapping is setting the status to 'Completed' (on return code 0 or 4) BEFORE the software checks the status; i.e. the status is actually 'Completed' (rc=4) and not 'Error' (rc=4) so an event is not raised.
Ideally I want to set the Event to be raised on status 'Completed' with a return code 4 - but when I select 'Completed' the 'Error Code' box is greyed out.
I.e. can't set this - I can only set on a generic 'Completed' and I don't want to raise a message if the status is Completed but the return code is 0....
Any ideas??
Ross

Document control failed due to error in [DOCMGR-CANCEL] with a return code

i am getting this error while calceling the purchase order "Document control failed due to error in [DOCMGR-CANCEL] with a return code of [OTHER]. "
I am doing the calcel like this
Nav: buyer work centre --> order
searche the po and then
select order --> cancel then click GO button
i gave the Reason as Cancel
communication method: email
Cancel Requisition: Yes
Please help on this, its urgent.
Thanks,
Vijay.

Hi Vijay,
Check this MOS note.
Cancelling A Standard Purchase Order In Buyer Work Center Results In Error [Docmgr-Cancel] With A Return Code [ID 1338826.1]
Thanks
-Arif.

Program ended with error or warning, return code: F

Friends, During client export i am facing below mention error, Pl suggest asap
Client export from 06.04.2011 18:00:44
System ID............................ PPT
R/3 Release.......................... 700
Basis Support Package...............SAPKB70018
Host................................. pptest
Start in background............. .....X
User................................. SUPER
Parameter
Source client........................ 500
Source client user masters............500
Copier profile:.......................SAP_ALL
Table selection
Command file......................... PPTKT00008
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0012
Error exporting request PPTKT00008 23:40:31
Program ended with error or warning, return code: F
Runtime (seconds) : 20,390
End of processing: 23:40:33

There could be three things possibly causing this error:
1. There is some database issues, that is the connection to the database maybe is lost that's why TP ends.
2. The TP return Code can also arise due to issues at the OS level, where SAP is installed.
3. Due to permission issues also this can creep in. By permission issues I mean there are not enough permissions, please use trace ST01 and run the process again.
Also please paste the Imort Log, as it can help in further analysis and with that please give your database and OS informations.

Java 2 runtime Environment setup failed with a return code of -1

Hi!
I have tried to install sdk 1_3_1_01 on Windows 2000 with ServicePack 2 and the error "Java 2 runtime Environment setup failed with a return code of -1" occured. As I saw, a lot of people has the problem but couldn't find a solution on this page!
Please help !
Me

I've installed 1.3.1_01 on both W2K Workstation and Server, no problem. There's a bug report, but no workaround or solution.
http://developer.java.sun.com/developer/bugParade/bugs/4412291.html
and it's supposedly 'fixed' in 1.4.0 beta.
http://java.sun.com/j2se/1.4/fixedbugs/fixedbugs-beta2.html
You might try installing the beta version
http://java.sun.com/j2se/

Error opening dataset, return code:        8

Hi,
I'm passing the information from a txt to a transparente table. The problem is that it throws me the following message: Error opening dataset, return code:        8 .
When I debug it the first row of information enters to the internal table but after it this erro comes.
The code is the following:
DATA: BEGIN OF record,
data element: TABNAME
        tablename_001(030),
data element: DESCR40
        des_002(040),
data element: TYKLA
        tipo_003(015),
data element: QUANTITY_I
        quan_004(011),
data element: PRICE
        precio_005(021),
data element: TOT01
        total_006(017),
      END OF record.
End generated data section ***
DATA:
BEGIN OF i_tabla OCCURS 0,
dest(40),
type(15),
quan(10),
precio(15),
tot(15),
END OF i_tabla.
PARAMETERS:
p_user LIKE apqi-userid OBLIGATORY DEFAULT sy-uname,
p_fich LIKE rlgrap-filename OBLIGATORY
DEFAULT: 'C:\Documents and Settings\lseri\My Documents\Book1.txt'.
START-OF-SELECTION.
CALL FUNCTION 'UPLOAD'
   EXPORTING
CODEPAGE                      = ' '
     filename                      = p_fich
     filetype                      = 'DAT'
    TABLES
      data_tab                      = i_tabla
   EXCEPTIONS
     conversion_error              = 1
     invalid_table_width           = 2
     invalid_type                  = 3
     no_batch                      = 4
     unknown_error                 = 5
     gui_refuse_filetransfer       = 6
     OTHERS                        = 7
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
PERFORM open_dataset USING dataset.
PERFORM open_group.
LOOP AT i_tabla FROM 2.
PERFORM bdc_dynpro      USING 'SAPLSETB' '0230'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'DATABROWSE-TABLENAME'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=ANLE'.
    PERFORM bdc_field       USING 'DATABROWSE-TABLENAME'
                                  record-tablename_001.
    PERFORM bdc_dynpro      USING '/1BCDWB/DBZSTOCK_TEST' '0101'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'ZSTOCK_TEST-TOTAL'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=SAVE'.
    PERFORM bdc_field       USING 'ZSTOCK_TEST-DES'
                                  record-des_002.
    PERFORM bdc_field       USING 'ZSTOCK_TEST-TIPO'
                                  record-tipo_003.
    PERFORM bdc_field       USING 'ZSTOCK_TEST-QUAN'
                                  record-quan_004.
    PERFORM bdc_field       USING 'ZSTOCK_TEST-PRECIO'
                                  record-precio_005.
    PERFORM bdc_field       USING 'ZSTOCK_TEST-TOTAL'
                                  record-total_006.
    PERFORM bdc_dynpro      USING '/1BCDWB/DBZSTOCK_TEST' '0101'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/EBACK'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'ZSTOCK_TEST-DES'.
    PERFORM bdc_dynpro      USING 'SAPLSETB' '0230'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/EBACK'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'DATABROWSE-TABLENAME'.
    PERFORM bdc_transaction USING 'SE16'.
ENDLOOP.
PERFORM close_group.
PERFORM close_dataset USING dataset.
Please help me!
Thanks

open dataset                                                       *
FORM OPEN_DATASET USING P_DATASET.
OPEN DATASET P_DATASET
               FOR INPUT IN TEXT MODE
               ENCODING DEFAULT.
IF SY-SUBRC <> 0.
    WRITE: / TEXT-E00, SY-SUBRC.
    STOP.
ENDIF.
ENDFORM.
create batchinput session                                          *
(not for call transaction using...)                                *
FORM OPEN_GROUP.
IF SESSION = 'X'.
    SKIP.
    WRITE: /(20) 'Create group'(I01), GROUP.
    SKIP.
open batchinput group
    CALL FUNCTION 'BDC_OPEN_GROUP'
         EXPORTING CLIENT   = SY-MANDT
                    GROUP    = GROUP
                    USER     = USER
                    KEEP     = KEEP
                    HOLDDATE = HOLDDATE.
    WRITE: /(30) 'BDC_OPEN_GROUP'(I02),
            (12) 'returncode:'(I05),
                 SY-SUBRC.
ENDIF.
ENDFORM.
I'm using these performs because they appeared automatically when the recording became a program.

OCIEnvCreate fails with -1 return code on Solaris 9 x86 with Oracle 10g

Hi
OCIEnvCreate function is failing with -1 return code on solaris 9 x86. The database I use is, Oracle 10g release 1. I tired to connect with sqlplus and am able to connect to dataserver. Why does OCIEnvCreate fails? Can someone help me in this regard.
Thanks

Can place the sample code.

Traport importing problem with repeating return code error 8

Hi all,
We are facing some transport import problem.When we sent transport initially AAA900244,they faced with return code error 8 and syntax error 109.As the information provided by the client,one of the include program which is not availble at client system that was included in this transport.So that was the problem.Again we have taken new tranport AAA900247 without this include program then same type of error message they faced with return code error 8 and syntax error 109 in the include program when imported.
I have one doubt, when importing new transport this should overwrite the earlier transport data.Why the same type error client is getting.What might be the reason.
Is earlier transport imported?? Why it throwing same type error.What actually the fuctionality of Return code 8 whether it is imported or discarded.
Thanks in advance.
Regards.....Balu

Hi Ramesh,
That include is not at all required at client system.So next time when we have taken transport we have not included this include program.They imported new transport without this include program.But they are facing same error as they faced first time. What could be reason??
Regards...Balu

WAS 6.40 ABAP stack install - error with sapstartsrv.exe - Help needed!

Hi all,
Can anyone assist me with a new installation issue? I am trying to perform an initial install of WAS 6.40 SP3 ABAP stack (non unicode) using the NW Master CD and CD51030103 for the SAP Kernel on a vanilla W2K AS server.
I also have a previously installed working version of EP6.0 SP9 on WAS 6.40 (SP9) on the same physical server.
The problem is occuring at the Create and reregister services part of the new 6.40 kernel install, I am getting the message:
WARNING 2004-12-08 18:45:26
Execution of the command "F:\usr\sap\IDS\SYS\exe\run/sapstartsrv.exe '-r' '-q' '-p' 'F:\usr\sap\IDS\SYS\profile\START_DVEBMGS00_devbox01' '-s' 'IDS' '-n' '00' '-U' 'devbox01\SAPServiceIDS' '-P' 'XXXXXX' '-e' 'devbox01\idsadm'" finished with return code -1. Output: Test call to Service failed.Profile parameter SAPSYSTEMNAME or SAPSYSTEM doesn't match installation parameters.Service not correctly installed.
ERROR 2004-12-08 18:45:26
MOS-01011 'F:\usr\sap\IDS\SYS\exe\run/sapstartsrv.exe' returned with '-1'.
I have had no problems in the past in installing a 6.20 kernel on the same host as a portal server, but this time with 6.40 I have had no luck.
I have tried replacing the version of sapstartsrv.exe from the
..usr\sap\SID\SYS\exe\run directory with a more recent version to see if the exe version was the problem but this has not resolved.
I have also tried to run the installation again without deleting the previous files, and this has also made no difference.
I have read through most of the forum's regarding problems with sapstartsrv.exe failing, but couldn't find anything that can help fix my problem.
If anybody thinks they can help, it would be most appreciated
Cheers,
Paul

Hi Sergio, hi Paul,
I'm getting the same error while trying to install with RI 2.5. Interesting enough, I also have a 6.20 installed on the same machine.
Sergio, do you mean by your last post one should change the system nr when configuring the installation?
Paul, did you find a workaround/solution?
Thanks in advance
Detlev

WAS 6.40 ABAP stack install - error with sapstartsrv.exe

Hi,
Can anyone assist? I am trying to perform an initial install of WAS 6.40 SP3 ABAP stack (non unicode) using the NW Master CD and CD51030103 for the SAP Kernel on a vanilla W2K AS install, which also has a working EP6.0 SP9 runnning on it.
At the Create and reregister services part of the kernel install, I am getting the message:
WARNING 2004-12-08 18:45:26
Execution of the command "F:\usr\sap\IDS\SYS\exe\run/sapstartsrv.exe '-r' '-q' '-p' 'F:\usr\sap\IDS\SYS\profile\START_DVEBMGS00_devbox01' '-s' 'IDS' '-n' '00' '-U' 'devbox01\SAPServiceIDS' '-P' 'XXXXXX' '-e' 'devbox01\idsadm'" finished with return code -1. Output: Test call to Service failed.Profile parameter SAPSYSTEMNAME or SAPSYSTEM doesn't match installation parameters.Service not correctly installed.
ERROR 2004-12-08 18:45:26
MOS-01011 'F:\usr\sap\IDS\SYS\exe\run/sapstartsrv.exe' returned with '-1'.
I have had no problems in the past in installing a 6.20 kernel on the same host as a portal server, but this time no luck.
I have also tried replacing the version of sapstartsrv.exe from the
..usr\sap\SID\SYS\exe\run directory with a more recent version to see if the exe version was the problem but this has not resolved.
I have also tried to run the installation again without deleting the previous files, and this has also made no difference.
I have read through most of the forum's regarding problems with sapstartsrv.exe failing, but nothing of use to fix my problem.
If anybody thinks they can help, it would be most appreciated
Cheers,
Paul
Message was edited by: Paul Brine

Hi Sergio, hi Paul,
I'm getting the same error while trying to install with RI 2.5. Interesting enough, I also have a 6.20 installed on the same machine.
Sergio, do you mean by your last post one should change the system nr when configuring the installation?
Paul, did you find a workaround/solution?
Thanks in advance
Detlev

BPC5.1 - Data manager package to Stored proc with custom return codes

Hi all,
Does anyone have experience passing the return codes from a stored procedure back into the eData "view status" package progress or event log details?
When my stored procedure throws errors, the offending SQL code shows up in the pacakge details, which is helpful. But what I'd really like is to structure my stored proc with return codes
0 = everything's wonderful
1 = invalid category / time combination
2 = unauthorized
3 = no data to process
And then handle these codes as either "completed" "warning" or "error" in the package progress.
And ideally, I'd like to put some meaningful message about the warnings & errors, directly into the log details, so the user can fix the problem themselves rather than ask the IT guy to trouble-shoot.
Any tips? I've started playing with using the on-complete, on-success, on-failure routing of different tasks within the DTSX package (SQL 2005), but I'm just working on a trial-and-error basis right now. (With # of errors = # of trials.)
Thanks,
Tim

In case anyone's interested, I've solved this by tracking my return codes as a package variable.
Within the package, I have conditional logic moving from task to task, evaluating the return code to check for various conditions, and selecting which tasks to perform accordingly.
In the last task, I run a final stored procedure which posts some data (completion time & status) to a custom transaction log table, and then if the return code is not zero, I script and execute some SQL which I know will throw a "fake" error. The SQL statement itself includes the key information I want the end user to see. For example
Select InvalidEntitySelection [USEast1],TransactionID [12340] from ThisTableDoesntExist
Select UnauthorizedUser [Tim], TransactionID [12345] from ThisTableDoesntExist
Select WorkStatusIsLocked [USEast1 Actual 2008], TransactionID [12345] from ThisTableDoesntExist
It's not exactly elegant, but it gets the message across, which is all that I need. In this way, the end user sees that the package failed with an error, and when they look at the package details, they can see the problem. They can pass on the transaction ID to an administrator to look into the details, if they can't figure it out on their own.
Sorin, I never managed to figure out how to use a VB task to send the information back to the user, plus force the package to end in an error. I'm sure there's a way to do so, but this seems to work for my requirement.
I'm not entirely happy with the "fake error" approach, but I don't know if BPC has any support for "intentional" programming of errors in the DTS scripting toolset.
Thanks,
Tim

Brrestore from disk terminates with - BR0279E Return code from 'LANG=C unco

Dear all,
During restore of database backup using brrestore terminates with following error and following command is used for restore of database backup
brrestore -m full -b begoyfjy.afd -d disk -c ***
BR0352I Decompressing /oracle/EED/sapdata2/sr3_6/sr3.data6
BR0355I from /oracle/EED/sapdata4/backup/begoyfjy/sr3.data6.Z ...
BR0278E Command output of 'LANG=C uncompress -c /oracle/EED/sapdata4/backup/begoyfjy/sr3.data6.Z > /oracle/EED/sapdata2/sr3_6/sr3.data6':
uncompress: corrupt input
BR0280I BRRESTORE time stamp: 2011-08-24 12.02.03
BR0279E Return code from 'LANG=C uncompress -c /oracle/EED/sapdata4/backup/begoyfjy/sr3.data6.Z > /oracle/EED/sapdata2/sr3_6/sr3.data6': 1
BR0359E Restore of /oracle/EED/sapdata2/sr3_6/sr3.data6 from /oracle/EED/sapdata4/backup/begoyfjy/sr3.data6.Z failed due to previous errors
BR0406I End of file restore: regpukoh.rsb 2011-08-24 12.02.03
BR0280I BRRESTORE time stamp: 2011-08-24 12.02.03
BR0404I BRRESTORE terminated with errors
epdrdvec:oraeed 8>
epdrdvec:oraeed 8> #FILE..... /oracle/EED/sapdata1/sr3_27/sr3.data27
#FILE.....: Command not found.
epdrdvec:oraeed 9> #RESTORED. /oracle/EED/sapdata4/backup/begoyfjy/sr3.data27.Z #1/5
#RESTORED.: Command not found.
epdrdvec:oraeed 10>
epdrdvec:oraeed 10> BR0280I BRRESTORE
I went through sap notes , but appreantly sounds for AIX as i am working with HP UX 11.31 on HP IVM. Please advice if this is a known issue.
Thanks ,
Rahul

Hi Rahul,
>> uncompress -c /oracle/EED/sapdata4/backup/begoyfjy/sr3.data6.Z
Seems like the data file has been corrupted and cannot be extracted. At ths stege, there's nothing to do. Even, you will able to extract the file, its structure might be damaged and not safe to use.
Best regards,
Orkun Gedik

Error /SAPAPO/OM102, return code 40,015 in APO DP

I am using APO DP V5.
In interactive DP, we are getting error /SAPAPO/OM102 with return code 40,015.
Had anyone had experience of this?
Thanks,
Bob Austin, Atos Origin.

Hello,
As per my understanding of your qurery...
You are accessing intractie Demand planning
that time you are getting error.
/SAPAPO/OM102 Return code 40015
With the above understanding ... I am trying to reply your query as
When I tried to execute transaction /SAPAPO/OM10 - Display Meaning of Return Code
And entered return code 40015
I received Display messages as "Date is before start date of time buckets profile"
ON long text it is "Date is before start date of time buckets profile
Message no. /SAPAPO/OM_TS015
Diagnosis
The date lies before the start date of the time buckets profile used.
This problem is due to an error in the application.
Procedure
Open an OSS message in accordance with SAP Note 167280.
Please check the details above.
In Intractive demand planning what type of work you were doing during this error occured?

ZTI ERROR - Non-zero return code by LiteTouch, rc = -2147023589 0x8007051B

Hi,
Operating system is installed and after that defined applications are not getting installed. Deployment ended with below errors. Please help me to solve the problem.
MSD 2010 is the tool which is used for deploying Windows 7 Enterprise Edition 32 bit operating system.
ResourceRoot = \\Server1\DeploymentShare
Property ResourceDrive is now = Z:
ResourceDrive = Z:
Property _SMSTSPackageName is now = Lite Touch Installation
SMS Task Sequencer already found on C:\MININT\Tools\X86
LiteTouch
RUN: regsvr32.exe /s "C:\Users\ADMINI~1\AppData\Local\Temp\Tools\x86\Microsoft.BDD.Utility.dll"
LiteTouch
RUN: regsvr32.exe /s "C:\Users\ADMINI~1\AppData\Local\Temp\Tools\x64\Microsoft.BDD.Utility.dll"
LiteTouch
FAILURE (Err): 429: CreateObject(Microsoft.BDD.Utility) - ActiveX component can't create object
LiteTouch
LTI beginning deployment
About to run command: "C:\MININT\Tools\X86\TsmBootstrap.exe" /env:SAStart
Litetouch deployment failed, Return Code = -2147023589 0x8007051B
For more information, consult the task sequencer log ...\SMSTS.LOG
Property RetVal is now = -2147023589
CleanStartItems Complete
About to run command: MSHTA.exe "\\Server1\DeploymentShare\scripts\Wizard.hta" /definition:Summary_Definition_ENU.xml
Property definition is now = Summary_Definition_ENU.xml
Wizard
Microsoft Deployment Toolkit version: 5.1.1642.01
Wizard
Not Wizard = False Wizard
Property WizardComplete is now = N Wizard

For more information, consult the task sequencer log ...\SMSTS.LOG
Check the SMSTS.log file. If you need additional help, please copy the log file to a public share like onedrive and send the link here.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Error with sapstartsrv return code -1

Similar Messages

Maybe you are looking for