Error with Service

Hi - I am running into an error, but Adobe is not elaborating as to what the cause is. I am trying to covert a PDF into an Excel file and the error message reads - "An error occurred while trying to access the service." Is anyone else receiving this message and/or know what the cause of it is?

Are you able to login from web UI (https://www.acrobat.com/exportpdf/en/home.html)? Do you get the error while converting any PDF file to Excel from Reader?

Similar Messages

Error with service connections

Hi ,
I have configuring serivce connections in SOLMAN but when i go open the connections it doesn`t open for few systems . Also the connections get open if i want to choose client 000 but it doesn't open for our client . I get these error message .
System P83 can not be accessed via destination SM_P83CLNT410_READ
System P83 can not be accessed via destination SM_P83CLNT410_TRUSTED
Ping to SAP Support Backbone failed
Thanks
Harsh

Hi Krishnam,
you better ask such questions in the BSP forum. But you should go to transaction SICF and activate the service of your application. Usually you'll find it in /sap/bc/bsp/sap/<application>. You need also some other standard services if this is your first BSP application. Check in documentation or in the correct forum.
Regards
Ralph

A big error with services adobe...

Hi, yesterday I configured the services adobe, and interactive forms... but, i think thaht the configuration is bad... Se this picture:
<a href="http://img237.imageshack.us/my.php?image=pdfgb8.jpg" target="_blank"><img src="http://img237.imageshack.us/img237/6074/pdfgb8.th.jpg" border="0"/></a>
What happends? Is the configuration of services adobe?
Thanks,
Message was edited by:
        Victor Capi

Hi Victor,
                First thing for edit mode there is 1 option is there,(A pencil is shown just above the runtime tab) in ur picture.click on that.
2nd once u r in edit mode,it will enable the button for create user.there u can add the user,using which u run ur application.If u r using standalone engine,it may be administrator,or if any other user is created for u ,u have to use that.
For credentials u need to open a OSS ticket on sap merket place.SAP will provide u the credentials as a PKCS file.That u have to import in ur system.
for further queries u can check this document
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/95/5a08cd0e274a0bae559622d6670722/frameset.htm">ADS Configuration Guide</a>
regards
Sumit

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

Error after transport of Virtual Cube with Services

Hi All,
would any body can suggest me how we can change the source system assignment in QA or Production client for virtual Cube with Services.
A virtual cube is created with Services using the settings for RFC and using the logical source system. however after transporting the same to the QA system the Logical Source System has not changed and thus it is giving error " Error occured while determining target system for the logical system" would any body can suggest me how i can change the logical source system assignment in QA system for Virtual Cube with services.
Points would be rewarded appropriately.
Cheers
Noor

Hi Noor,
Check this link, it may help you.
Re: Transport issue - Source system does not exist
Regards,
Vijay G.

Can't install quicktime or itunes I recieve error code 2738. I'm running windows Vista 32 with Service Pack 2. I have tried old and new version of both programs. Also, have gone through Apple's online help with no good outcome

Can't install quicktimeor uninstall it for that matter and itunes I receive error code 2738 with both downloads. I'm running Window Vista with Service Pack 2. I have check for all window update. I have gone through Apple itune help list. Even going into cmd to do regsvr32 vbscript.dll which was successfull. Can you help...my son had to register his ipod at the neighbors house..What going on.
Son even call apple with no help and was give Microsoft number no help there either they wanted me to call HP.....run around

Excellent news!
Strange how sometimes the fixit works better than the manual methods, and sometimes the manual methods work better than the fixit. It differs from Microsoft fixit to Microsoft fixit too. (Unfortunately, because these "anomalous 2738s" are pretty rare as install errors go, I don't have a good feel yet for whether or not it's the fixit or the manual method that's more likely to work in iTunes/QuickTime installation contexts.)
Afraid I'm not very good on earbud troubleshooting, but fingers crossed the folks over at the iPod communities might be able to help:
https://discussions.apple.com/community/ipod

The Lync Server Front-End service terminated with service-specific error %%-1008124893.

Hello, everyone
I've installed Lync Server 2010. There was no error during installation. But when i start Lync Server Front End Server, i'm getting following error:
The Lync Server Front-End service terminated with service-specific error %%-1008124893.
In event viewer:
The evaluation period for Microsoft Lync Server 2010 has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Cause: The evaluation period for Microsoft Lync Server 2010 has expired.
I've upgraded Lync Server according to http://technet.microsoft.com/en-us/library/gg521005.aspx?ppud=4
Also I've installed all Lync Server updates.
But I still could not start Lync Front End Sever. How can I solve this problem?
Thanks

Hi,
Can you try to run
start-cswindowsservice -report c:\report.html
and post the report so we can have more information about your problem ?
Regards,
Adrian TUPPER - ABC Systemes - http://thelyncexperience.blog.com/ If answer is helpful, please hit the green arrow on the left, or mark as answer Thank you

Error using BAPI_PO_CREATE1 for creating PO with services

Hi,
I'm getting an error saying 'EnTER account assignment data for item' when I use BAPI_PO_CREATE1 and try to create POs with Service Items. I have filled all the required details, even then the system throws up this error message. Thanks for any help.
Regards,
Vijay

what have you passed to the table POACCOUNT? and POACCOUNTX?
Regards,
Ravi

"NO_RECEIVER_CASE_BE" error with SOAP Sender assigned to a Business Service

Hi all,
we have a strange error with XI3.0
We created a configuration scenario where the initial step is done by a Business System, that uses a SOAP Sender communication channel to send its request. And this works great when testing it with XMLSpy.
But we then needed to shift from a Business System to a Business Service, as the machine sending the SOAP request changed and was not anymore part of the landscape, but elsewhere.
Hence we recreated a SOAP sender which we assigned to this new business service, doing absolutely the same configuration work as for the other soap sender of the former business system.
Yet when testing it through XMLSpy, we everytime get a NO_RECEIVER_CASE_BE error back, stating that "No receiver could be determined". Yet when checking in sxi_cache, receiver determination is clearly there. All the blogs I went into are only refering to Business System for a SOAP sender, so I was wondering if any of you already managed to assign a SOAP sender to a business Service.
Regards,
Cedric

hi,
so you sue SOAP to make a query ? (sync)
or to send the data to XI ? (async)?
if async then make sure
you use <b>Quality of Service</b> other then BE
in your soap adapter channel
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Error with web service SRT: Unexpected failure in SOAP processing occurred:

Hello,
I get the following error with a web service
"SRT: Unexpected failure in SOAP processing occurred: ("No configuration for this HTTP server instance")"
Any ideas on how to solve this ?
Thanks.
Regards, Michel

Hi,
I think the WSDL file shared with you and the soap message you are getting are a mismatch.
Try to check the soap message xml format and see if matches the ouputs tags structure in WSDL file.
Thanks & Rgds,
Aditya

Service request error with TDS3034B Scope

Hello,
I am getting an error with a service request when initializing my oscilloscope. When I use the VISA Discard Events vi, there is an error 1073676292 that says
VISA: (Hex 0x3FFF0004) Operation completed successfully, but queue was already empty.
However, immediately after, I use VISA Enable Event and get an error 1073676290 that says
VISA: (Hex 0x3FFF0002) Specified event is already enabled for at least one of the specified mechanisms.
Both Discard and Enable Events are Service Request, so I am unsure why it would read that there is an empty queue, and then afterwards read that the Service Request is already enabled.
Thank you for any help you may be able to give on the subject.

Hello,
Has the event already been enabled before this? I believe it will stay enabled until the VISA Disable Event VI is called, and not the VISA Discard Events VI.
Regards,

SQL Server VSS Writer terminated with service-specific error 2147549183 (0x8000FFFF)

Hi Team,
SQL VSS Writer service terminated with service-specific error,
find SC query results, please advice wat;s the issue. Kindly note this service running fine for long time and suddenly stopped.
SERVICE_NAME: SQLWriter
        TYPE               : 10 WIN32_OWN_PROCESS
        STATE              : 1 STOPPED
                                (NOT_STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN))
WIN32_EXIT_CODE    : 1066 (0x42a)
        SERVICE_EXIT_CODE : -2147418113 (0x8000ffff)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
Regards,
Karthik
Thanks & Regards, Karthikeyan

this is part of a log error for example:
24 Info 2011/09/26 23:00 [Start SQL VSS Comman]
(NOT_STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
25 Info 2011/09/26 23:00 [Start SQL VSS Comman] WIN32_EXIT_CODE : 0 (0x0)
26 Info 2011/09/26 23:00 [Start SQL VSS Comman] SERVICE_EXIT_CODE : 0 (0x0)
27 Info 2011/09/26 23:00 [Start SQL VSS Comman] CHECKPOINT : 0x0
28 Info 2011/09/26 23:00 [Start SQL VSS Comman] WAIT_HINT : 0x7d0
29 Info 2011/09/26 23:00 [Start SQL VSS Comman] PID : 15532
30 Info 2011/09/26 23:00 [Start SQL VSS Comman] FLAGS :
31 Info 2011/09/26 23:00 Klaar met uitvoeren post-opdrachten
32 Error 2011/09/26 23:00 The writer vetoed the shadow copy creation process during the
backup preparation state. (VSS_WS_FAILED_AT_PREPARE_BACKUP)
33 Info 2011/09/26 23:00 Verwijderen tijdelijk bestand C:\Users\serveradmin\.temp\
1313680495583
34 Error 2011/09/26 23:00 Backup voltooid met fout(en)
This is what I look for usually from this log:
32 Error 2011/09/26 23:00 The writer vetoed the shadow copy creation process during the
backup preparation state. (VSS_WS_FAILED_AT_PREPARE_BACKUP)
Just post all the log messages if you can.
[Personal Site] [Blog] [Facebook]

SSIS Web Service Task Error with WCF Service

I have read all the other posts on this site and have not been able to resolve my issue.
For testing purposes i created a very simple WCF service that takes no arguments and returns true. That is all it does.
When i create a winform client and instantiate the service i can run my service method and get true back so i know the service works.
I then create a test SSIS package with 1 task, a web service task.
I set the web service tasks properties as follows:
http connection: http://localhost/WCF_SSIS_Prototype/Service1.svc
wsdl file: C:\...\SSIS_WCF_Prototype\Service1.wsdl (I know this is not a valid path, i changed it for posting to forum)
Service: Service1
Method: GetData
Variable: User::BResult
When i run the package i get the following error:
[Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not execute the Web method. The error is: Method 'ProxyNamespace.Service1.GetData' not found..    at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection)    at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection)    at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
I'm not sure why it is saying "Method 'ProxyNamespace.Service1.GetData' not found. It the web service task trying to create a proxy class and naming the proxy class namespace ProxyNamespace?
Any help is greatly appreciated.

Hi,
How do you get around the same issue if your string type is based on a client token ? I downloaded the .wsdl file, was able to see the service name, method and when selecting a method type, I am required to provide a client token which was given
to me. (Name column = clienttoken, Type = string, Value = 2227656 - ec8922 (client token numbers goes there)? I am new to use ssis and need your help please
error message: Web Service Task] Error: An error occurred with the following error message:
"Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: The web serrvice threw an error during method execution. The error is: An error occurred
when verifying security fro the message..
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()"
Thank you and regards,
Bili

The Web Management Service service terminated with service-specific error %%-2147483640,

We've been able to successfully, automatically, deploy our MVC and WebApi to IIS7.5 on Win2008 R2, for some time now. Just this week the MSDeploy stopped working. The System event log shows this error when attempting to restart the Web Management
Service on the targeted Win200 R2 server:
The Web Management Service service terminated with service-specific error %%-2147483640.
The Application log shows this error at the same exact time the above error occurs.
IISWMSVC_STARTUP_UNABLE_TO_ACTIVATE_HWC
Failed to activate the Hostable Web Core (HWC). Web Management Service startup failed. Please reference the Win32 error in this event for further information. Exception:System.Runtime.InteropServices.COMException (0x8007007F): The
specified procedure could not be found. (Exception from HRESULT: 0x8007007F) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at Microsoft.Web.Management.Server.WebServer.Microsoft.Web.Management.Server.Interop.IWebServer.Start()
Process:WMSvc User=NT AUTHORITY\LOCAL SERVICE
The above error is preceded by this warning:
A listener channel for protocol 'http' in worker process '7164' serving application pool 'WMSvcAppPool' reported a listener channel failure. The data field contains the error number.
Which is preceded by this error:
Failed to find the RegisterModule entrypoint in the module DLL C:\Windows\Microsoft.NET\Framework64\v4.0.30319\webengine.dll. The data is the error.
We've attempted to reach the target server using https://ourservername:8172/MsDeploy.axd. The response is:
Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the connection
Is this occurring because the port is blocked or because the Web Management Service is not running? (The Windows Firewall with Advanced Security dialog says the "Windows Firewall is off" and there are no entries in the firewall log (C:\Windows\System32\LogFiles\Firewall).
We've seen some posts that indicate the certificate may be the issue. Not sure how to actually tell if this is the case though. The CERT we have says it is valid thru 2029.

Hi Nicola,
seems like your web service runtime is not configured correctly. Please check out the following SAP Notes:
Note 1043195 - Configuration of the Web service runtime
Note 1292171 - Troubleshooting Guide: ABAP Web Services Runtime
Kind regards
Heiko

Unity Service - Error: Unable to communicate with service control center

Hi Guys,
I have a CUC Cluster of 2 nodes at 9.1.2 I did a Cobra restore and since the cobra I have an issue when I go to Unity Connection Servicability and then
If I go in service Management I have this error : " Error: Unable to communicate with service control center "
I am not the only one who got that Issue.. the documentation is not so clean from cisco..
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-version-70/110587-cuc-credential-error.html#Controlcenter
Here is what I did and the result
admin:run cuc dbquery unitydirdb select alias, displayname, objectid from vw_user where alias ='adminunity'
alias       displayname objectid
adminunity adminunity   2774a94d-052d-49e9-9288-bf447a4b1532
admin : run cuc dbquery unitydirdb select objectid, userobjectid, credentialtype, encryptiontype from tbl_credential where userobjectid = "2774a94d-052d-49e9-9288-bf447a4b1532"
objectid                              userobjectid                          credentialtype       encryptiontype
1255f7f7-5d15-4406-ab54-df5f248e30bf 2774a94d-052d-49e9-9288-bf447a4b1532 3               3
5ace4b8f-dbeb-4e46-8d7c-146b13db5499 2774a94d-052d-49e9-9288-bf447a4b1532 4               3
admin : run cuc dbquery unitydirdb update tbl_credential set encryptiontype = "3" where objectid ="1255f7f7-5d15-4406-ab54-df5f248e30bf"
admin run cuc dbquery unitydirdb update tbl_credential set encryptiontype = "3" where objectid ="5ace4b8f-dbeb-4e46-8d7c-146b13db5499"
admin:run cuc dbquery unitydirdb select objectid, userobjectid, credentialtype, encryptiontype from tbl_credential where userobjectid = "2774a94d-052d-49e9-9288-bf447a4b1532"
objectid                              userobjectid                          credentialtype encryptiontype
1255f7f7-5d15-4406-ab54-df5f248e30bf 2774a94d-052d-49e9-9288-bf447a4b1532 3               3
5ace4b8f-dbeb-4e46-8d7c-146b13db5499 2774a94d-052d-49e9-9288-bf447a4b1532 4               3
but once I did that, I wasn't able to login anymore with my user, so I put it back to 4.
anyone ?

I make the right configuration of my network (eth0 and eth1) and I reboot my server the start CRS service automaticaly...
The problem is that my server don't stop rebooting automaticaly!!!
In /var/log messages I have this " oracle CSSD failure. Rebooting for cluster integrity" !!!
some one can help?

Error with Service

Similar Messages

Maybe you are looking for