Error with silent install

Hello,
I have problem with the silent install of  BlackberryDesktopSoftware 1.1b29
I have try to install with /S and nothing.
I have try to install with this option  " setup.exe /s /L1033 /v" /qn ALL_Users =1 " and nothing again.
I have try to install the older version of BBDesktop sofware and it's works fine with the second option.
Do you have any Idee ??
thanks

Hi,
Just Pro 7.0.0 (I'll integrate the patches to 7.0.9 later)
I'm not keen on an Admin install, as this poses problems when patching (i.e. you have to do a "reinstall=All"). I prefer to integrate released patches into the silent install package, and for subsequent patches, just package them for silent install and push them down to the client.
Reader 8.0 is on the machine only.
The base build contains Reader 8.0, the we deliver a package to the machine to silently install Acrobat Pro 7
Thanks,
mark

Similar Messages

  • Problems with silent install of an AS10.1.2.0.2 infrastructure

    Hello,
    I posted this over on the database forum too. I'm trying to create a silent install for an AS 10.1.2.0.2 infrastructure database. I created the response file using the -record option for the installer. I then modified the response file according to the instructions in the app server installation documentation. When I run setup with the response file I get the follow error...
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be 5.0, 5.1 or 5.2 . Actual 5.0
    Passed
    Checking swap space: must be greater than 1535 MB . Actual 4092MB Passed
    Checking for SERVICE_PACK: must be 3 . Actual Service Pack 4 Passed
    Checking Temp space: must be greater than 150 MB . Actual 60731 MB Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from C:\DOCUME~1\cdwright\LOCALS
    ~1\Temp\OraInstall2008-04-30_06-38-27PM. Please wait ... Oracle Universal Instal
    ler, Version 10.1.0.4.0 Production
    Copyright (C) 1999, 2005, Oracle. All rights reserved.
    Loading Product Information
    ...............................................................100% Done.
    Analyzing dependencies
    .........Error:*** Alert: An error occurred attempting to find the ASControl ser
    vice executable in this Oracle Home. Please verify that the file C:\oracle\infra
    \bin\nmesrvc.exe exists in this home or that this Oracle Home is valid. ***
    Why is the installer looking for ASControl? This should be a fresh install. Any help I can get would be much appreciated.
    Cliff Wright

    Do you already have an AS running on this machine? If you're doing a reinstall, did you remove the inventory and all appropiate registry settings?

  • Repackaging Safari 5.1.7 with silent install and custom settings

    Hi everyone,
    I'm searching for a solution to create a custom installation for Safari 5.1.7.
    I accomplished the same task for other browsers using the MSI extraction from the .EXE installer and using different methods to set custom settings like: EULA accepted, default home page, etc during the installation process.
    My question here is if Apple supports or allows to do a redistribution of its application for large Windows Enterprise environments with this kind of custom settings using either Flexera Install Shield or any other to modify the MSI installer and accomplish this task without the need of using external .JS, .XML files like other browser silent installations supports for redistribution / repackaging.
    I isolated the Safari MSI file to prevent the installation of the other software that comes with the main .EXE: AppleSoftwareUpdate.msi, Bonjour and Bonjour64.msi, SetupAdmin.exe  but I can't modify the default home page or prevent the prompt to set the default browser from inside the MSI to have it done.
    This custom settings should be done in a more elegant way than using Regedit to search for the changes after the Setup finishes.
    If you have any answer for this please let me know.
    Kind regards.

    Well I guess I have to reply to myself. No one seems to know this one.
    I found that : https://discussions.apple.com/thread/2316559?threadID=2316559   is Not working for Safari 5.1.7 on Windows 7 x64 even if you tried to open the pslist file from : ...\AppData\Roaming\Apple Computer\Preferences\com.apple.Safari.plist the file seems that will be set as per user and even if you modify it it will not work.
    No support has been found to have a GPO neither Flexera Admin Sudio Repackager or Tunner has succeeded to repackage or Build a successful MSI using Isolate or Installation Monitoring process due to some errors during the installation pointing to folder : C:\Windows\winsxs
    So, basically I just need to confirm with any Apple guru if this is Possible or Not to do that or what could be the solution to get a normal SCCM 2012 package for Safari 5.1.7  with custom settings: Home Page, Disable ask for Default Browser, Disable Ask for Updates.
    By the way I have the switches that works fine for Silent install and it works fine:
    msiexec /i Safari.msi /qn SCHEDULE_ASUW=0 DESKTOP_SHORTCUTS=1 installdir="%programfiles(x86)%\Safari" allusers=true reboot=suppress
    I will really appreciate if some one replies asap   !!!! 
    Thanks and Kind regards.

  • Sequencing with silent install

    When sequencing one could run through the GUI's of a setup. After that some adjustments are likely needed like deleting the uninstall/desktop shortcut and so on.
    The other possibility is to use a silent setup as input for the sequencer. A lot off applications come with a vendor .MSI nowadays. This gives the opportunity to create a transform file which in many occasions can prevent the creation of uninstall/desktop shortcuts
    and other customization's as needed.
    Now, I'm writing guidelines on how external parties should deliver app-v packages to us. I stated that, if possible, they should deliver the command line of the silent setup used as input for the sequencer. However, they see this as the creation of two packages,
    MSI/silent setup and App-V.
    I wanted to check how other people work. Do they first create a silent setup and use that as input or do they launch the setup GUI and repeat what is documented in the manual installation document.
    In my opinion the advantage of using a silent setup as input is that you can easily replicate a local install in case there is a problem with the appv package. It also customizes the setup during install so adjustments afterwards are not needed, resulting in
    a somewhat cleaner package. The 3th advantage I see is that often you can reuse the .mst/command line when a new version is needed.
    What are your thoughts on requesting a silent install from the sequencers?

    In my opinion the advantage of using a silent setup as input is that you can easily replicate a local install in case there is a problem with the appv package. It also customizes the setup during install so adjustments afterwards are not needed,
    resulting in a somewhat cleaner package. The 3th advantage I see is that often you can reuse the .mst/command line when a new version is needed.
    What are your thoughts on requesting a silent install from the sequencers?
    This is a perfect case of there is no wrong way to do it, but what you said above is very true.  In fact, packaging software like Flexera Admin Studio encourage you to do it this way.  They don't want you to think of a package as a single deployment
    type, but rather however you want to deploy the software (MSI, App-V, etc).
    The investment in time is likely the biggest hurdle.  When you have to do something simple, creating an MSI/silent command first and then creating an App-V package is 2x the work.  Its not a bad standard to go with though.  And as Tibervis
    said, it does come in handy if you need to perform an upgrade or otherwise need to start sequencing from scratch again.  It is in my opinion 2 packages, just as it would be 2 packages to create an App-V 4 and App-V 5 package even if you used powershell
    to convert the 4x package to 5.  This gets very into your process though. 
    Just watch out you aren't making you own life 10x harder to protect yourself from something that only might happen a small percentage of the time.  Keep in mind that there are also going to be deployments where the App-V package requires work the MSI
    doesn't - a driver, a component that needs to be outside the bubble, etc.  Having an MSI won't help you create the App-V in that case, and if you ask packagers to create an MSI, an App-V, and an App-V instruction guide (for packagers eyes only) you might
    be shot on sight.

  • Problem with silent install of 11gR1 on Windows 2008

    I'm doing a silent install of 11gR1 on Windows Server 2008. It works fine on Windows Server 2003. I have SECURITY_UPDATES_VIA_METALINK set to false, yet it seems to be forcing it to true and then it fails the install because I have an invalid metalink username/password. In the install log I get this, as expected:
    INFO: Setting variable 'SECURITY_UPDATES_VIA_METALINK' to 'false'. Received the value from response file.
    but then I get this later on:
    INFO: Setting the value of SECURITY_UPDATES_VIA_METALINK to true
    INFO: Setting variable 'SECURITY_UPDATES_VIA_METALINK' to 'true'. Received the value from a code block.
    SEVERE: Invalid MetaLink credentials. Specify the correct e-mail address and password that you use to log in to MetaLink.
    INFO: User Selected: Yes/OK
    Invalid MetaLink credentials. Specify the correct e-mail address and password that you use to log in to MetaLink.
    Why is it forcing this to true? As I said, this same exact response file works fine with Server 2003. Any suggestions?
    Oh, also, I've tried forcing the value to false on the command line and by not specifiying a value (because the default is supposedly false).
    Thanks in advance

    Here is the command line I used on the last attempt:
    setup -silent "ACCEPT_LICENSE_AGREEMENT=true" -responseFile C:\database\standard11.rsp -waitforcompletion -nowait
    And here is the response file (I had to delete a lot of the comments to get it to fit within the 30000 character limit for this message):
    RESPONSEFILE_VERSION=2.2.1.0.0
    FROM_LOCATION="../stage/products.xml"
    NEXT_SESSION_RESPONSE=<Value Unspecified>
    ORACLE_BASE="C:\oracle\"
    ORACLE_HOME="C:\oracle\product\11.1.0\db_1\"
    ORACLE_HOME_NAME="OraDb11g_home1"
    TOPLEVEL_COMPONENT={"oracle.server","11.1.0.7.0"}
    DEINSTALL_LIST={"oracle.server","11.1.0.7.0"}
    SHOW_SPLASH_SCREEN=false
    SHOW_WELCOME_PAGE=false
    SHOW_NODE_SELECTION_PAGE=false
    SHOW_SUMMARY_PAGE=false
    SHOW_INSTALL_PROGRESS_PAGE=false
    SHOW_CONFIG_TOOL_PAGE=false
    SHOW_XML_PREREQ_PAGE=false
    SHOW_ROOTSH_CONFIRMATION=false
    SHOW_END_SESSION_PAGE=false
    SHOW_EXIT_CONFIRMATION=false
    NEXT_SESSION=false
    NEXT_SESSION_ON_FAIL=false
    SHOW_DEINSTALL_CONFIRMATION=false
    SHOW_DEINSTALL_PROGRESS=false
    RESTART_SYSTEM=false
    RESTART_REMOTE_SYSTEM=<Value Unspecified>
    REMOVE_HOMES=<Value Unspecified>
    ORACLE_HOSTNAME=<Value Unspecified>
    SHOW_END_OF_INSTALL_MSGS=false
    CLUSTER_NODES=<Value Unspecified>
    COMPONENT_LANGUAGES={"en"}
    INSTALL_TYPE="SE"
    n_configurationOption=1
    s_ASMSYSPassword=""
    s_ASMSYSPasswordAgain=""
    n_dbType=1
    oracle.assistants.server:s_responseFileName=<Value Unspecified>
    s_globalDBName="WLMDB"
    s_dbSid="WLMDB"
    n_selectedMemoryForOracle=256
    n_memoryOption=1
    s_dbRetChar="US7ASCII"
    b_disableSecureConfig=false
    b_loadExampleSchemas=false
    b_useDBControl=true
    b_receiveEmailNotification=false
    s_dlgEMSMTPServer=<Value Unspecified>
    s_dlgEMEmailAddress=<Value Unspecified>
    s_dlgEMCentralAgentSelected=<Value Unspecified>
    n_dbStorageType=1
    s_mountPoint="C:\oracle\product\11.1.0\oradata"
    b_enableAutoBackup=false
    b_useFileSystemForRecovery=true
    s_dlgRBORecoveryLocation=<Value Unspecified>
    s_dlgRBOUsername=<Value Unspecified>
    s_dlgRBOPassword=<Value Unspecified>
    s_dlgASMCfgDiskGroupName="DATA"
    s_dlgASMCfgDiskDiscoveryString=<Value Unspecified>
    n_dlgASMCfgRedundancySelected=<Value Unspecified>
    sl_dlgASMCfgSelectableDisks=<Value Unspecified>
    sl_dlgASMCfgDiskSelections=<Value Unspecified>
    sl_dlgASMDskGrpSelectedGroup={" "," "," "," "}
    b_centrallyManageASMInstance=true
    b_useSamePassword=true
    s_superAdminSamePasswd="*******"
    s_superAdminSamePasswdAgain="*******"
    sl_superAdminPasswds=<Value Unspecified>
    sl_superAdminPasswdsAgain=<Value Unspecified>
    METALINK_USERNAME="[email protected]"
    METALINK_PASSWORD="aBc124xx"
    SECURITY_UPDATES_VIA_METALINK=false
    DECLINE_SECURITY_UPDATES=true
    COLLECTOR_UPGRADE=<Value Unspecified>
    COLLECTOR_IGNORE_CONFIGURATION=<Value Unspecified>
    COLLECTOR_IGNORE_FAILURES=<Value Unspecified>
    COLLECTOR_USE_OBFUSCATED_PASSWORDS=<Value Unspecified>
    COLLECTOR_RESPONSE_FILE=<Value Unspecified>
    PROXY_HOST=<Value Unspecified>
    PROXY_PORT=<Value Unspecified>
    PROXY_USER=<Value Unspecified>
    PROXY_PWD=<Value Unspecified>
    n_performUpgrade=0
    n_upgradeDB=0
    s_dbOHSelectedForUpgrade=""
    s_dbSIDSelectedForUpgrade=""
    n_upgradeASM=0
    s_dbSelectedUsesASM="no"
    # DO NOT MODIFY THE VALUE OF THIS VARIABLE #
    sl_upgradableSIDBInstances={}
    sl_upgradableRACDBInstances={}
    #Name : n_dbSelection
    #Datatype : Number
    #Description: row selected in the spread table of upgradable DB instances
    #Component : oracle.server
    # DO NOT MODIFY THE VALUE OF THIS VARIABLE #
    n_dbSelection=0
    #Name : b_stateOfUpgradeASMCheckbox
    #Datatype : Boolean
    #Description: stores the state of checkbox in UI
    #Component : oracle.server
    # DO NOT MODIFY THE VALUE OF THIS VARIABLE #
    b_stateOfUpgradeASMCheckbox=false
    #Name : b_stateOfUpgradeDBCheckbox
    #Datatype : Boolean
    #Description: stores the state of checkbox in UI
    #Component : oracle.server
    # DO NOT MODIFY THE VALUE OF THIS VARIABLE #
    b_stateOfUpgradeDBCheckbox=false
    #Name : b_oneClick
    #Datatype : Boolean
    #Description: Governs one-click behavior
    # DO NOT MODIFY THE VALUE OF THIS VARIABLE #
    b_oneClick=false
    #Name : s_dlgASMCfgRedundancyValue
    #Datatype : String
    #Description: Redundancy Value
    #Component : oracle.server
    # DO NOT MODIFY THE VALUE OF THIS VARIABLE #
    s_dlgASMCfgRedundancyValue=""
    #Name : s_dlgASMCfgExistingFreeSpace
    #Datatype : String
    #Description: Existing Free Space
    #Component : oracle.server
    # DO NOT MODIFY THE VALUE OF THIS VARIABLE #
    s_dlgASMCfgExistingFreeSpace="0"
    #Name : s_dlgASMCfgNewDisksSize
    #Datatype : String
    #Description: New Disks Size
    #Component : oracle.server
    # DO NOT MODIFY THE VALUE OF THIS VARIABLE #
    s_dlgASMCfgNewDisksSize=""
    #Name : s_dlgASMCfgAdditionalSpaceNeeded
    #Datatype : String
    #Description: Additional Space Needed for ASM configuration
    #Component : oracle.server
    # DO NOT MODIFY THE VALUE OF THIS VARIABLE #
    s_dlgASMCfgAdditionalSpaceNeeded="0 MB"
    #Name : n_configTabSelected
    #Datatype : Number
    #Description: This determines the config tab selected in UI install.
    #Component : oracle.server
    # DO NOT MODIFY THE VALUE OF THIS VARIABLE #
    n_configTabSelected=0
    #Name : n_dbCharSetOption
    #Datatype : Number
    #Description: This determines the character set option selected in UI install.
    #Component : oracle.server
    # DO NOT MODIFY THE VALUE OF THIS VARIABLE #
    n_dbCharSetOption=3

  • Help with Silent Install

    Hi
    I'm trying to perform a silent install of XE in winXP sp2 and get the same result each time, the installs starts up shows an icon on the taskbar and then exits with resultcode=-3.
    I've been through the forums and tried everything possible so far without success.
    The normal install works fine and I was able to create a response file which I then attempted to use for the silent install, I also tried the response file on the Oracle site with the same result. Is there anyway to determine at which dialog the installer is failing or is there anything else I can try?
    Thanks
    Govind

    What userid are you using to perform the install?
    Because of the way my company manages security on our laptops, I had to create a "local" account on the laptop. Then add that "local" account as part of the Administrators of the laptop. My typical "network" based account would not complete the install EVEN THOUGH THAT "network" account was part of the Administrators group on the laptop.
    There is also a feature called RunAs on Windows that allows you to run a scheduled install like the silent one using a different userid from the one you are logged in as.
    hth,
    adym

  • Need help with silent install of Peoplesoft Internet Architecture

    I have PT8.49.15 and need to do a silent installation of the web tier on linux. I am supposed to run the $PS_HOME/setup/PsMpPIAInstall/setup.linux which is a Microfocus Installshiled wizard. Any ideas how I can make this a silent installation? I need to automate all of my deployments and have not figured out how to create or pass in a response file to use as input. Is this possible?
    thanks

    Looking in the deployment script installpia.sh of PSOVM, here's the way of silent PIA install :
    PT_HOME=/opt/oracle/psft/pt
    TOOLS_HOME=$PT_HOME/tools
    BEA_HOME=$PT_HOME/bea
    SILENT_INSTALL_FILE=install.properties
    echo "Doing PIA silent install"
    if [ ! -d $TOOLS_HOME/tmp ]; then
        mkdir $TOOLS_HOME/tmp
    fi
    cd $TOOLS_HOME/tmp
    # If there is a pre-existing silent response file we
    # remove it
    if [ -f $SILENT_INSTALL_FILE ]; then
        rm -f $SILENT_INSTALL_FILE
    fi
    echo PS_HOME=$TOOLS_HOME >> $SILENT_INSTALL_FILE
    echo DOMAIN_NAME=peoplesoft >> $SILENT_INSTALL_FILE
    echo SERVER_TYPE=weblogic >> $SILENT_INSTALL_FILE
    echo BEA_HOME=$BEA_HOME >> $SILENT_INSTALL_FILE
    echo USER_ID=system >> $SILENT_INSTALL_FILE
    echo USER_PWD=password >> $SILENT_INSTALL_FILE
    echo INSTALL_ACTION=CREATE_NEW_DOMAIN >> $SILENT_INSTALL_FILE
    echo DOMAIN_TYPE=NEW_DOMAIN >> $SILENT_INSTALL_FILE
    echo INSTALL_TYPE=SINGLE_SERVER_INSTALLATION >> $SILENT_INSTALL_FILE
    echo WEBSITE_NAME=$PIA_SITENAME >> $SILENT_INSTALL_FILE
    echo APPSERVER_NAME=localhost >> $SILENT_INSTALL_FILE
    echo JSL_PORT=$JOLT_PORT >> $SILENT_INSTALL_FILE
    echo HTTP_PORT=$PIA_HTTP_PORT >> $SILENT_INSTALL_FILE
    echo HTTPS_PORT=$PIA_HTTPS_PORT >> $SILENT_INSTALL_FILE
    echo AUTH_DOMAIN= >> $SILENT_INSTALL_FILE
    echo WEB_PROF_NAME=DEV >> $SILENT_INSTALL_FILE
    echo WEB_PROF_USERID=PTWEBSERVER >> $SILENT_INSTALL_FILE
    echo WEB_PROF_PWD=PTWEBSERVER >> $SILENT_INSTALL_FILE
    echo REPORTS_DIR=/var/tmp/psreports >> $SILENT_INSTALL_FILE
    cd $TOOLS_HOME/setup/PsMpPIAInstall
    sh setup.sh -javahome $TOOLS_HOME/jre -i silent -DRES_FILE_PATH=$TOOLS_HOME/tmp/$SILENT_INSTALL_FILE -tempdir $TOOLS_HOME/tmpMake the necessary changes in the echoing according to your own configuration.
    Nicolas.

  • Validation Errors with new Install of W7 x64 Ent Debug Checker On New Equipment

    I am receiving multiple Errors. I am trying to use the Windows 7 x64 Enterprise which happens to be the Debug Checker version OS as the host machine.  I have only built the machine, and tried to load the Drivers.
    I say this due to the starting issue that upon the loading of the entire driver set, (for the MB, Seagate Harddrive, and Vid Card), I would get the BSOD.  I identified that the Bluetooth driver was the issue.  I then did not load the Bluetooth
    drivers for the MB on the 5<sup>th</sup> or so install of the 7 Ent os.  (Tried Server 2k8 r2. Which is not compatible with the MB Drivers.)
    I have not received a single Update either.  The Auto update feature claims that I am up to date.  I do not believe this due to the fact that any fresh Install of any OS has about several decades of updates and reboots to go through.
    Upon trying the suggestions on the forum about turning off the IE Addons, the errors remain.  Also the results of the sfc /scannow are copied below.
    My Questions
    I am seeking assistance on solving the Errors that have refused to leave me alone , to put it humorously and am asking for your insight and wisdom.  Will you take a look??
    Do I need to go to Win 7 Ent or Ult x64 that is not a Debug Checker version.
    Are there other Microsoft download Registery file checkers besides the MGA Diag tool that are freeware that I can use to check, for corrupted registry files.
    Or do I just need to take it to the stores (Fry’s and Microcenter) that recommended the equipment and have them just reload the software and allow them the headache of solving the error issue, by paying them to install the drivers and have ALL of the
    drivers work. (including the blue tooth)
    The Goal is to turn it into a Active Directory Server using Virtual Box with Server 2k8 R2 running in the virtual box environment.
    Errors and Results.
    There are also a number of logs that show various Crit, Error, and Warning logs.  I will include those if need be.
    This is the majority of the error messages, and I have missed the opportunity to capture others.
    Internet explorer encountered Validation errors:
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 0000000000B221DB
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : comctl32.dl
    iii.     
    Assert offset: 00133A2A
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 008BE823
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 0040F9E8
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : iertutil.dll
    iii.     
    Assert offset: 001DEC51
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : KERNELBASE.dll
    iii.     
    Assert offset: 00014159
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 0000000000B221DB
    Microsoft Management Console Encountered a Validation Error
    Validation Error
    i.     
    Process Name: mmc.exe
    ii.     
    Module Name : ieframe.dll
    iii.     
    Assert offset: 00000000006C9283
    Scripted Diagnostics Native Hot encountered a Validation Error
    Validation Error
    i.     
    Process Name: sdiagnhost.exe
    ii.     
    Module Name : urlmon.dll
    iii.     
    Assert offset: 00000000001A0A73
    Validation Error
    i.     
    Process Name: sdiagnhost.exe
    ii.     
    Module Name : KERNELBASE.dll
    iii.     
    Assert offset: 0000000000017f32
    Windows System Assessment Tool encountered a validation error
    Validation Error
    i.     
    Process Name: winsat.exe
    ii.     
    Module Name : KERNELBASE.dll
    iii.     
    Assert offset: 0000000000017F32
    Windows Explorer Encountered a validation Error
    Validation Error
    i.     
    Process Name: Explored.exe
    ii.     
    Module Name : thumbcache.dll
    iii.     
    Assert offset: 00000000000300BE
    AI Suite 2 encountered a validation error
    Validation Error
    i.     
    Process Name: AI Suite 2.exe
    ii.     
    Module Name : ntdll.dll
    iii.     
    Assert offset: 000686BD
    the number “2” is the substitutedfor the roman numeral 2
    I believe that this is part of the MB Suite.
    My the environment is a new equipment, and Downloaded student software. Windows 7 Enterprise SPK 1 Debug Checker, Valid Key with the software download.  Activated on 8-12-2012
    Motherboard: Asus p9x79 Deluxe, Part number: 90-mibh50-g0aay0kz
    Chip Set: bx80619i73930k
    2x Memory: cmx16gx3m2a1600c11 Corsair
    Video Card: Diamond R7870 2GB DD OC 2xDVI/HDMI/2xDisplayport memory Clock 1250 MHz
    Hard Drive: 9jb1n3-574 (leave the last two didgets off when searching in the browser) This is a Seagate 2TB
    Generic optic drive: SH-222bb/bebe Samsung
    Here is the Microsoft Fix It error code
    Assertion Failed!
    Program:…
    File: d:\w7rtm\ds\security\cryptoapi\pki\...\newstor.cpp
    Line: 2131
    Expression: pStore->dwState = = STORE_STATE_OPEN || pStore->dwState = = STORE_STATE_OPENING || pStore->dwState = = STORE_STATE_DEFER_CLOSING || pStore->dwState = = STORE_STATE_NULL
    For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts
    (Press Retry to debug the application – JIT must be enabled)
                    Abort    Retry     Ignore
    Abort
    Closes the program
    Retry
    Repeats the error
    Verbatim
    Ignore
    Closes the program
    Nothing happens
    Here is the Microsoft Genuine Advantage Diagnostic Report
    Diagnostic Report (1.9.0027.0):
    Windows Validation Data-->
    Validation Code: 0
    Cached Online Validation Code: N/A, hr = 0xc004f012
    Windows Product Key: *****-*****-*****-*****-8C7YB
    Windows Product Key Hash: cezvXJ2/mUhIEFxJfWkZ3IN8EQQ=
    Windows Product ID: 55041-146-2397786-86942
    Windows Product ID Type: 6
    Windows License Type: Volume MAK
    Windows OS version: 6.1.7601.2.00010100.1.0.004
    ID: {EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}(1)
    Is Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/A, hr = 0x80070002
    Signed By: N/A, hr = 0x80070002
    Product Name: Windows 7 Enterprise
    Architecture: 0x00000009
    Build lab: 7601.win7sp1_rtm.101119-1850
    TTS Error:
    Validation Diagnostic:
    Resolution Status: N/A
    Vista WgaER Data-->
    ThreatID(s): N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    Windows XP Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    File Exists: No
    Version: N/A, hr = 0x80070002
    WgaTray.exe Signed By: N/A, hr = 0x80070002
    WgaLogon.dll Signed By: N/A, hr = 0x80070002
    OGA Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    OGAExec.exe Signed By: N/A, hr = 0x80070002
    OGAAddin.dll Signed By: N/A, hr = 0x80070002
    OGA Data-->
    Office Status: 109 N/A
    OGA Version: N/A, 0x80070002
    Signed By: N/A, hr = 0x80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
    Browser Data-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default Browser: c:\Program Files (x86)\Internet Explorer\iexplore.exe
    Download signed ActiveX controls: Prompt
    Download unsigned ActiveX controls: Disabled
    Run ActiveX controls and plug-ins: Allowed
    Initialize and script ActiveX controls not marked as safe: Disabled
    Allow scripting of Internet Explorer Webbrowser control: Disabled
    Active scripting: Allowed
    Script ActiveX controls marked as safe for scripting: Allowed
    File Scan Data-->
    File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
    Other data-->
    Office Details: <GenuineResults><MachineData><UGUID>{EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-146-2397786-86942</PID><PIDType>6</PIDType><SID>S-1-5-21-4234423899-2489109333-1931045272</SID><SYSTEM><Manufacturer>System
    manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>1103</Version><SMBIOSVersion major="2" minor="7"/><Date>20120409000000.000000+000</Date></BIOS><HWID>CFBA3607018400F2</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific
    Standard Time(GMT-08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults> 
    Spsys.log Content: 0x80070002
    Licensing Data-->
    Software licensing service version: 6.1.7601.17514
    Name: Windows(R) 7, Enterprise edition
    Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
    Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
    Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 55041-00172-146-239778-03-1033-7601.0000-2252012
    Installation ID: 000792957432055771547065313840421702569731971164600080
    Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial Product Key: 8C7YB
    License Status: Licensed
    Remaining Windows rearm count: 5
    Trusted time: 8/12/2012 5:47:25 PM
    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: N/A
    HealthStatus: 0x0000000000000000
    Event Time Stamp: N/A
    ActiveX: Not Registered - 0x80040154
    Admin Service: Not Registered - 0x80040154
    HealthStatus Bitmask Output:
    HWID Data-->
    HWID Hash Current: OAAAAAEAAgABAAEAAgACAAAABAABAAEAHKJu3XDSdMRkx4ieoGkwung0ipvkrmTRDIsORc6qNCE=
    OEM Activation 1.0 Data-->
    N/A
    OEM Activation 2.0 Data-->
    BIOS valid for OA 2.0: yes, but no SLIC table
    Windows marker version: N/A
    OEMID and OEMTableID Consistent: N/A
    BIOS Information:
      ACPI Table Name           OEMID Value     OEMTableID Value
      APIC                                    ALASKA                               
    A M I
      FACP                                   ALASKA                               
    A M I
      HPET                                    ALASKA                               
    A M I
      MCFG                                 ALASKA                               
    OEMMCFG.
      SSDT                                    AMICPU                              
    PROC
    Scan Now Results
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Windows\system32>sfc /scannow
    Beginning system scan.  This process will take some time.
    Beginning verification phase of system scan.
    Verification 100% complete.
    Windows Resource Protection did not find any integrity violations.
    C:\Windows\system32>

    Thank you for your valuable time.
    I have performed the Chkdsk and the memory Diagnostic tool as per the suggestions.
    The Memory Tool did not find anything amiss.
    As per another thread I am going to try flashing the bios as well with the updates.
    Following are the Chkdsk results.
    Are there any other suggestions?
    Chkdsk Results
    Checking file system on C:
    The type of the file system is NTFS.
    A disk check has been scheduled.
    Windows will now check the disk.                        
    CHKDSK is verifying files (stage 1 of 5)...
      89600 file records processed.                               
              File verification completed.
      221 large file records processed.                                     
    0 bad file records processed.                                       
    1596 EA records processed.                                             
    44 reparse records processed.                                      
    CHKDSK is verifying indexes (stage 2 of 5)...
      131874 index entries processed.                                        
    Index verification completed.
      0 unindexed files scanned.                                           0
    unindexed files recovered.                                       CHKDSK
    is verifying security descriptors (stage 3 of 5)...
      89600 file SDs/SIDs processed.                                        
    Cleaning up 36 unused index entries from index $SII of file 0x9.
    Cleaning up 36 unused index entries from index $SDH of file 0x9.
    Cleaning up 36 unused security descriptors.
    Security descriptor verification completed.
      21138 data files processed.                                           
    CHKDSK is verifying Usn Journal...
      36120296 USN bytes processed.                                            
    Usn Journal verification completed.
    CHKDSK is verifying file data (stage 4 of 5)...
      89584 files processed.                                                
    File data verification completed.
    CHKDSK is verifying free space (stage 5 of 5)...
      476262075 free clusters processed.                                        
    Free space verification is complete.
    Windows has checked the file system and found no problems.
    1953410047 KB total disk space.
      48065140 KB in 61610 files.
         43468 KB in 21139 indexes.
             0 KB in bad sectors.
        253139 KB in use by the system.
         65536 KB occupied by the log file.
    1905048300 KB available on disk.
          4096 bytes in each allocation unit.
     488352511 total allocation units on disk.
     476262075 allocation units available on disk.
    Internal Info:
    00 5e 01 00 ef 42 01 00 ef 95 02 00 00 00 00 00  .^...B..........
    e3 00 00 00 2c 00 00 00 00 00 00 00 00 00 00 00  ....,...........
    6d 00 75 00 69 00 00 00 00 00 00 00 00 00 00 00  m.u.i...........
    Windows has finished checking your disk.
    Please wait while your computer restarts.

  • Java 64-bit Windows 7 - Error with Tomcat Install

    Downloaded and ran jre-6u20-windows-i586-s.exe on a Win host (Dell PowerEdge R610 with 16 Core 2.27 GHz Intel Xeon) running Windows 7 64-bit. The website said if you're running a 64-bit Windows OS then download that file.
    When I run the command "java -version" it says,
    "C:\Users\plozanci>java -version
    java version "1.6.0_20"
    Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
    Java HotSpot(TM) Client VM (build 16.3-b01, mixed mode, sharing)"
    I'm trying to install Apache Tomcat 6.0.26. Getting the error: "[206 javajni.c] [error] %1 is not a valid Win32 application."
    After searching the web, it looks like the Tomcat is looking for a 64-bit JRE but encountering a 32-bit version. I thought that the jre-6u20-windows-i586-s.exe file had the 32-bit & 64-bit versions. If this is true, how do I get Tomcat to use the right version?
    If its false, where is the 64-bit version for Windows 7?

    No. They are separate installers. The 32bit will run on a 64bit OS, but it is not 64bit. If you need the 64bit, you will need to download the 64bit installer.
    You will need: jre-6u20-windows-x64.exe
    Go: http://java.sun.com/javase/downloads/index.jsp
    select: Download JRE
    select: Windows x64
    Happy downloading!
    -Roger

  • Error with JAVA install on WAS 640 AIX Oracle

    Hi All
    We are running AIX5.1 with Oracle
    I have successfully installed the ABAP central and DB instances, and am trying to install a JAVA stack.
    I am getting the following error when installing the JAVA stack:
    "CJS-00030  Assertion failed: lsnrctl: Parameter dbHome has to be a valid ORACLE_HOME"
    I have checked the environment variables as user oraj2e, and ORACLE_HOME is set to /oracle/J2E/920_64. I have checked the listener.ora file for user oraj2e, and ORACLE_HOME is set to /oracle/J2E/920_64.
    This all seems correct to me.
    Can anybody please help.

    Dear All,
    We are trying to install WAS 6.40 on AIX .
    Error message
    "CJS-00030 Assertion failed: lsnrctl: Parameter dbHome has to be a valid ORACLE_HOME"
    we have set the ORACLE_HOME,Still its not working
    Please any one help us to solve this problem
    Thanks in advance.
    Best Regards

  • Error with re-installing Illustrator. Exit code: 7 ? Help!

    Hello,
    I had problems opening my Illustrator-program (from Adobe Creative Suite 5, Design Premium) as it kept on opening a new file window, and not the program itself. I could keep on opening this file-window eternally, not in any way could i get in to the program, so I chose to un-install the Illustrator - not the whole package.
    Now when i try to re-install Illustrator in Adobe Application manager, it ends up with saying that a mistake happened and:
    "Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 1 fatal error(s), 3 error(s), 0 warning(s)
    ERROR: Found payload conflicts and errors:
    ERROR:  - Adobe Flash Catalyst CS5 depends on Flash Player to be installed.
    ERROR:  - Adobe Flash CS5 depends on Flash Player to be installed.
    FATAL ERROR: Conflicts were found in the selected payloads. Halting installation.
    I have installed on two computers, and I don't know if Adobe counts this as my third time installing and therefore wont let me? Even though it's on the same computer, name user and everything.
    Now: Can anybody help me getting back the program?
    I'm not really good with computers, and I cannot find a direct line to Adobe, so I hope someone can help
    Best, Julie

    Sorry, but this is not the right answer, it has nothing to do with lightroom 5.
    It's Adobe Illustrator and is has been working 7 days ago, I can't see why it has something to do with the hardware, my mac is super new.
    it's something else.

  • Error with Silent installation

    When I am doing the Solaris SP3 silent installation,
    I got the following error:
    "AdmInit: Failed to create psetHandle for cn=slapd-dali9,
    cn=iPlanet Dire ctory Server, cn=Server Group,
    cn=dali9.sunformacion.com, ou=sunformacion.com,
    o =NetscapeRoot (error code = 2)"
    (this is only 1 line).
    Anyway, everithing seems to work right, but I would like to
    know what is goint on.
    The install.inf and userinput.log are attached.
    Thanks.

    Hi,
    Seems to be okay at a quick glance, but would like to know if you have logged in
    as Administrator and installed. This seems to be like the directory server doesn't
    starts up. Have you checked if other type of installation, typical/custom to see if
    they make this working ?
    Regards
    Raj
    Fernando Lafora wrote:
    When I am doing the Solaris SP3 silent installation,
    I got the following error:
    "AdmInit: Failed to create psetHandle for cn=slapd-dali9,
    cn=iPlanet Dire ctory Server, cn=Server Group,
    cn=dali9.sunformacion.com, ou=sunformacion.com,
    o =NetscapeRoot (error code = 2)"
    (this is only 1 line).
    Anyway, everithing seems to work right, but I would like to
    know what is goint on.
    The install.inf and userinput.log are attached.
    Thanks.
    g_install_type 2
    NAS_backup_dir /train/iplanet/ias6/ias/backup
    POST_configure_LDAP Y
    FLAG_webconn 1
    FLAG_webless 1
    FLAG_nasa 1
    FLAG_deploy 1
    FLAG_newdeploy 1
    FLAG_nas 0
    LDAP_ServerRoot /train/iplanet/ias6
    LDAP_Hostname dali9.sunformacion.com
    LDAP_ServerIdentifier dali9.sunformacion.com
    LDAP_ServerPort 389
    LDAP_RootDN cn=Directory Manager
    LDAP_RootDNPwd dirmanager
    LDAP_AdminDomain sunformacion.com
    AdminServer_Port 5000
    LDAP_UserDirectoryAdminID admin
    LDAP_UserDirectoryAdminPwd admin
    LDAP_UserDirectoryLdapURL ldap://dali9.sunformacion.com:389/o=sunformacion.com
    LDAP_UseExistingUG N
    Flag_UpgradeFromSP1 N
    NAS_home /train/iplanet/ias6/ias
    NAS_userinputlog /train/iplanet/ias6/ias/userinput.log
    choice 1
    NAS_choice 1
    NAS_webserver 1
    NAS_CopyHTML 1
    NAS_extract_Orbix 1
    BASEDIR /train/iplanet/ias6/ias
    LocalHostName dali9.sunformacion.com
    LocalIPAddress 192.168.217.9
    FLAG_upgrade 0
    LDAP_nasconfig iasconfig
    POST_update_KIVAwebcgi_and_KIVAwebdocs Y
    KIVAwebdocs /train/iplanet/iws6/docs
    KIVAKey 2874059511-1648566893
    NSRootDir /train/iplanet/iws6/https-dali9.sunformacion.com
    CLUSTERNAME dali9.sunformacion.com
    POST_chmod_660_reg_dat N
    POST_chmod_777_gxlib_etc Y
    POST_configure_webserver Y
    d_str
    i_str
    CURPWD
    res
    nsinst /train/iplanet/iws6/https-dali9.sunformacion.com
    webserver_version 6.0 B05
    USER root
    WEBUSER iasuser
    WEBUSERGRP 101
    CURRENTUSERGRP 1
    MODE 777
    AdminPort 10817
    KIVAadmport 10817
    GXPort 10818
    KIVAkxsport 10818
    CGIPort 10819
    KIVAcgiport 10819
    KIVAjs 1
    KIVAkjsport_1 10820
    KIVAcs 1
    KIVAkcsport_1 10821
    NASA_ADMIN_USER admin
    PASSWORD admin
    IS3PJDBC 0
    ORACLEDIR
    ORCLVER
    ORCLSID
    ORCLLibrary
    SYBSDIR
    DSQUERY
    SYBSLibrary
    SYBSLibraryPath
    IFMXDIR
    IFMXSVR
    IFMXLibrary
    DB2DIR
    DB2INST
    DB2Library
    PRIOR 99
    PREFER_DB
    ORCLPriority 25
    SYBSPriority 20
    IFMXPriority 15
    DB2Priority 10
    TXN_DirectoryRoot /train/iplanet/ias6/ias/CCS0/TXNMGR
    TXN_MirrorDirectoryRoot /train/iplanet/ias6/ias/CCS0/TXNMGR_MIRROR
    TXN_IsEnabled 1
    TXN_InstallDefaults 0
    RES_Number 0
    TXN_DirectoryRoot_logVol_1 /train/iplanet/ias6/ias/CCS0/TXNMGR/ENG1/logVol
    TXN_IsRaw_1 0
    TXN_Offset_1 -1
    TXN_Size_1 1000
    RES_InstallResourceManager 0
    i18nFlag N
    currentUser root
    currentGroup other
    SuiteSpotUserID iasuser
    SuitespotGroup iasgroup
    chownNASfiles 1
    [General]
    FullMachineName= dali9.sunformacion.com
    SuiteSpotUserID= iasuser
    SuitespotGroup= iasgroup
    ServerRoot= /train/iplanet/ias6
    AdminDomain= sunformacion.com
    ConfigDirectoryAdminID= admin
    ConfigDirectoryAdminPwd= admin
    ConfigDirectoryLdapURL= ldap://dali9.sunformacion.com:389/
    UserDirectoryAdminID= admin
    UserDirectoryAdminPwd= admin
    UserDirectoryLdapURL= ldap://dali9.sunformacion.com:389/o=sunformacion.com
    Components= svrcore,base,slapd,admin,nas,nascore
    [slapd]
    SlapdConfigForMC= Yes
    SecurityOn= No
    UseExistingMC= No
    UseExistingUG= No
    ServerPort= 389
    ServerIdentifier= dali9.sunformacion.com
    Suffix= o=sunformacion.com
    RootDN= cn=Directory Manager
    UseReplication= No
    SetupSupplier= No
    SetupConsumer= No
    AddSampleEntries= No
    InstallLdifFile= suggest
    AddOrgEntries= Yes
    DisableSchemaChecking= No
    RootDNPwd= dirmanager
    Components= slapd,slapd-client
    [admin]
    SysUser= root
    Port= 5000
    ServerIpAddress= 192.168.217.9
    ServerAdminID= admin
    ServerAdminPwd= admin
    Components= admin,admin-client
    [msg]
    [base]
    Components= base,base-client,base-jre
    [nas]
    Components= WEBCONNECTOR,WEBLESS,iAS-AT,iAS-DT,pointbase,iAS_BASE

  • Boot Error with grub installed...no debug instructions

    * Quick Intro / About *
    Hello everybody... im new to linux in general and arch caught my eye since i have an interest in learning programming... i figured arch's documentation was better than that supplied for ubuntu since it's more in depth and has the core utilities needed to get a base system running with in-depth explanations (which i like). trust me when i say, i have read almost all of the arch documentation more than
    a few dozen times and have completed this successfully before...
    * My Problem *
    I installed my copy of Arch with the Core Utilities package and followed the wiki guides to the tee. i've done several test installations with VMware and Virtualbox OSE and decided to do it for real on my Toshiba Laptop Satellite l305d-s5895... all my hardware is currently supported by the majority of the Linux Distro's (i did my homework). I am attempting to do a dual boot with Arch and Windows
    the "/etc/rc.conf" file
    Localization -> default
    Hardware -> default
    Network ->
    HOSTNAME="myhostname"
      the "/etc/hosts" file is automatically adjusted during install
    eth0="dhcp"
    INTERFACES=(eth0)
    gateway="dhcp"
    ROUTES=(!gateway)
    Deamons -> default
    filesystem setup
    win7 -> hd0,0 sda1 primary
    arch -> hd0,1 sda2 primary
    swap -> hd0,1 sda5 logical
    cdrom -> sbd (device is auto-mounted)
    /dev/sda (MBR / Single HDD Device)
    After Grub Configuration ...these are my options to select for grub mount point
    /dev/sda
    /dev/sbd
    /dev/sda
    /dev/sda1
    /dev/sda2
    /dev/sda5
    /dev/sbd
    I always select /dev/sda at the very top of the list...
    the "/boot/grub/menu.lst" file
    Gen Config ->
    timeout 5
    default 0
    color light-blue/black light-cyan/blue
    Boot sections ->
    # (0) Arch Linux
    title KDM
    root (hd0,1)
    kernel /boot/vmlinuz26 root=/dev/sda2 ro vga=ask
    initrd /boot/kernel26.img
    # (1) Fallback (default settings)
    # (2) Windows
    title Windows 7
    rootnoverify (hd0,0)
    #makeactive #win7 does not require this
    chainloader +1
    * the Error I recieve *
    At boot and during reboot, unless i have a boot medium, this is what i am prompted with...
    Intel UNDI, PXE-2.1 (build 082)
    Copyright (C) '97 - '00 Intel Corp.
    For Realtek RTL8101E/8102E PCI-E Ethernet Controller v1.05 (071227)
    PXE-E61: Media test failure, check cable
    PXE-M0F: Exiting PXE ROM.
    No bootable device -- insert boot disk and press any key
    any help would be amazing! i have no idea why at boot the computer searches for a network connection
    instead of the GRUB! >.<
    i am able to boot however with the Arch Live Disc and access my filesystem for both Arch and Windows 7
    and resume normal use!

    well, just as an update... i believe it is a software issue... i wiped my whole HDD with gparted and set the partitions with Arch Live Core Install medium and GRUB worked perfectly... i created an NTFS partition as well for Win 7... hopefully the Win Installer wont overwrite GRUB and use its own bootloader. i was re-reading an area of the wiki and found...
    - GRUB must be installed on the MBR (first sector of the hard disk), or the first partition of the first storage device to be recognized by most BIOS's.
    source: https://wiki.archlinux.org/index.php/Gr … stallation
    hopefully i can just reinstall GRUB if needed with the Live Disc and i can boot win7 and arch like that...
    if an suggestions, or comments, please...would be nice.
    Last edited by xovertheyearsx (2011-03-11 05:23:05)

  • There is not enough memory error with 8gb installed

    Description:
    I'm getting an error when trying to copy or cut a collection of basic shapes in CS6 on Mac OS X 10.8.
    It reads:
    There is not enough memory to complete the operation.
    To increase available memory, close other open documents or applications.
    But when i check activity monitor there is plenty of memory available. I can succesfully copy a smal(ler) amount of shapes.
    Steps already taken:
    Tried copying after a system restart with no other programs running.
    Tried adding more memory (i had 4gb originally, I just upgraded to 8gb).
    I reinstalled Flash
    I tried the same procedure (copying the same amount of shapes) on another machine with a similar amount of RAM and this works fine.
    Is there a way you can allocate more memory to flash, or is this some setting that i'm missing?
    Any help would be greatly appreciated!
    P.s. I read this thread http://forums.adobe.com/message/3609214#3609214, and my problem is only different in that i don't have some huge files i'm dealing with. The .fla is only ~10mb.

    Thanks for chiming in Mataxia.
    One thing you can try is selecting the layers that have the shapes you want to copy. Then right click and choose copy layers. In my case this works even though selecting just the shapes (instead of the layers) will cause the memory error.
    I'm using this as a workaround, but i can imagine that this isn't of any help in all cases.
    This confirms my suspicions that this is a bug in flash. Would be great if someone from Adobe were reading this...

  • How to handle "/9.2.0/root.sh as root from another window" in silent instal

    Hi,
    I was successful to start a silent installation of Oracle9iR2 using a responsefile on my System RHEL 3. But the installation ends soon and a wrong successful install message:
    Error :*** Alert: A configuration script needs to be run as root before installation can proceed. Please leave this window up, go run /opt/app/oracle/product/9.2.0/root.sh as root from another window, then come back here and click OK to continue. ***
    The installation of Oracle9i Database was successful.
    I use -ignorePatchConflicts for ignoring the patch conflicts. But How do I handle these issues. Where I have to run root.sh ... etc in teh Non Interactive Install.
    I am scripting solution for non interactive install and manual intervention to run these root.sh shell scripts at different points of install is not a good idea as it wont help me automate the install.
    Please let me know if anyone has solved this problem with -silent install.
    Thanks in advance.
    Senthil

    Thats me (OP) again:
    I tried setting:
    SHOW_ROOTSH_CONFIRMATION=false in the response file. But still no help. The installation exits at run root.sh prompt point. How I can effectively deal with it in a script?

Maybe you are looking for