Error with Solaris 8 and Apache 2.0.39

Hello everyone.
I've been trying to install the binary version of Apache 2.0.39 on Solaris 8. With the binary files copied to /usr/local/apache2 and using the following command:
. apachectl -f /usr/local/apache2/conf/httpd.conf -k start
I get the following error:
Syntax error on line 235 of /usr/local/apache2/conf/httpd.conf:
Cannot load /usr/local/apache2/modules/mod_auth_digest.so into server: ld.so.1:
/usr/local/apache2/bin/httpd: fatal: relocation error: file /usr/local/apache2/m
odules/mod_auth_digest.so: symbol __floatdidf: referenced symbol not found
Following the same steps with the binary version (for RedHat) works perfectly under Linux. Does anyone have any ideas?

After searching the web, found the answer:
Need to create a symbolic link for the needed file "libgcc_s.so.1".
ie. If "libgcc_s.so.1" is located under "/usr/local/lib" then
cd /usr/lib
ln -s /usr/local/lib/libgcc_s.so.1 libgcc_s.so.1
Then reconfigure and compile Apache 2.

Similar Messages

Aborting index build. Too many errors with finding and copying files ...

Hi dears,
I'm using UCM 11g.
I'm trying to start the automatic update cycle. When i start it, it gives me an error message just like :
Indexing aborted at :<time>. Aborting index build. Too many errors with finding and copying files to the appropriate place.+
Can anybody help me about this problem?
Helps will be appreciated.
Erdo
Edited by: erdo on 28.Mar.2013 11:11

Read this: error in Collection Rebuild Cycle
and maybe also UCM Indexer - Collection Rebuild Cycle errorring out

Solaris Express Zone install error with SUNWiiimr and SUNWcnetr

Hi all,
I got these errors when installing a new zone on a Solaris Express 1/08 (5.11) on a x64 box:
Installation of these packages generated errors: SUNWiiimr
Installation of these packages generated warnings: SUNWcnetr
The zone creation log shows:
*** package -SUNWiiimr- failed to install with fatal errors:
/export/zones/newzone/root/var/sadm/pkg/SUNWiiimr/install/postin stall: /export/zones/newzone/root/lib/postrun: not found
/export/zones/newzone/root/var/sadm/pkg/SUNWiiimr/install/postinstall: /export/zones/newzone/root/lib/postrun: not found
pkgadd: ERROR: postinstall script did not complete successfully
Installation of -SUNWiiimr- on zone -newzone- failed.
*** package -SUNWcnetr- installed with warnings:
pkgadd: ERROR: unable to create package object -/export/zones/newzone/root/etc/dladm-.
owner name -dladm- not found in passwd table(s)
ERROR: attribute verification of -/export/zones/newzone/root/etc/dladm/aggregation.conf- failed
owner name -dladm- not found in passwd table(s)
ERROR: attribute verification of -/export/zones/newzone/root/etc/dladm/linkprop.conf- failed
owner name -dladm- not found in passwd table(s)
ERROR: attribute verification of -/export/zones/newzone/root/etc/dladm/secobj.conf- failed
owner name -dladm- not found in passwd table(s)
Installation of -SUNWcnetr- on zone -newzone- partially failed.
-newzone- was configured to be a whole root zone. Are there any ways to solve these installation errors?
Thanks in advance.

This problem seems some strange - this time with Solaris 10u4, from 10 containers installed on a brand new X2200 (2x cpu) only one do not output those errors, but just this one cannot install the dsee or proxy. This time the errors were from:
Installation of <SUNWxwplr> on zone <dsee-proxy> partially failed.
Installation of <SUNWdtdmr> on zone <dsee-proxy> partially failed.
Installation of <SUNWmconr> on zone <dsee-proxy> partially failed.
Installation of <SUNWrmwbr> on zone <dsee-proxy> partially failed.
Installation of <SUNWlvmr> on zone <dsee-proxy> partially failed.
Installation of <SUNWzebrar> on zone <dsee-proxy> partially failed.
So the machine was, too, just installed. After several hours, anoter atempt to install a zone, this time just this one, returned no errors - and the dsee installed without any complains. All configurations were for whole root zones. Used was Solaris 10u4 with the most recent patch cluster applied.

[SOLVED] errors with fdisk and cryptsetup; is my drive going bad?

I'm having issues with re-formatting an external hard drive using dm-crypt. It was previously formatted with TrueCrypt/NTFS, which I used as a shared backup drive between Windows and Arch. At some point, it stopped being able to mount, which I attributed to allowing Windows to "fix" it after improper dismount (e.g. a hard kill).
I decided to re-format with ext4 and only use it from Arch, but now I'm wondering if I may have a hardware issue with the drive. I've tried a lot more (like going through the full zero write after mounting the drive as a temporary dm-crypt device), but here's the condensed version to illustrate the problem.
system info
This is on a fresh boot. Just adding that as I've had issues with kernel modules after updating if a new kernel comes through. A fresh boot removes that potential issue.
$ uname -a
Linux arch_840 4.0.3-1-ARCH #1 SMP PREEMPT Wed May 13 15:38:47 CEST 2015 x86_64 GNU/Linux
$ lsmod | grep dm_
dm_crypt 28672 2
dm_mod 98304 5 dm_crypt
$ lsmod |grep xts
xts 16384 2 serpent_sse2_x86_64,twofish_x86_64_3way
gf128mul 16384 2 lrw,xts
smartctl status
Figured I should check the drive. There's a lot of old age and pre-fail warnings, but this post would seem to suggest I'm okay?
# smartctl -A /dev/sdb
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-4.0.3-1-ARCH] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 0
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 090 089 025 Pre-fail Always - 3330
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 703
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3707
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 104
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 734
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 17
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 053 000 Old_age Always - 24 (Min/Max 16/47)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 3
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 104
225 Load_Cycle_Count 0x0032 079 079 000 Old_age Always - 214068
Disk info, delete existing partition, new MBR, create new partition
# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.26.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/sdb: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x76d37b6d
Device Boot Start End Sectors Size Id Type
/dev/sdb1 63 976768064 976768002 465.8G 83 Linux
Command (m for help): d
Selected partition 1
Partition 1 has been deleted.
Command (m for help): o
Created a new DOS disklabel with disk identifier 0x2cd60f13.
Command (m for help): n
Partition type
p primary (0 primary, 0 extended, 4 free)
e extended (container for logical partitions)
Select (default p): p
Partition number (1-4, default 1):
First sector (2048-976773167, default 2048):
Last sector, +sectors or +size{K,M,G,T,P} (2048-976773167, default 976773167):
Created a new partition 1 of type 'Linux' and of size 465.8 GiB.
Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
trying to format with cryptsetup
I had a bunch of custom options, but other Arch posts suggested just trying the default, which is what I've done here. It fails with the same error as when I try to pass a cipher, key size, etc. ("Command failed with code 5: IO error while encrypting keyslot.").
# truecrypt -v --debug luksFormat /dev/sdb1
bash: truecrypt: command not found
[root@arch_840 jwhendy]# cryptsetup -v --debug luksFormat /dev/sdb1
# cryptsetup 1.6.6 processing "cryptsetup -v --debug luksFormat /dev/sdb1"
# Running command luksFormat.
# Locking memory.
# Installing SIGINT/SIGTERM handler.
# Unblocking interruption on signal.
WARNING!
========
This will overwrite data on /dev/sdb1 irrevocably.
Are you sure? (Type uppercase yes): YES
# Allocating crypt device /dev/sdb1 context.
# Trying to open and read device /dev/sdb1.
# Initialising device-mapper backend library.
# Timeout set to 0 miliseconds.
# Iteration time set to 1000 miliseconds.
# Interactive passphrase entry requested.
Enter passphrase:
Verify passphrase:
# Formatting device /dev/sdb1 as type LUKS1.
# Crypto backend (gcrypt 1.6.3) initialized.
# Detected kernel Linux 4.0.3-1-ARCH x86_64.
# Topology: IO (512/0), offset = 0; Required alignment is 1048576 bytes.
# Checking if cipher aes-xts-plain64 is usable.
# Using userspace crypto wrapper to access keyslot area.
# Generating LUKS header version 1 using hash sha1, aes, xts-plain64, MK 32 bytes
# KDF pbkdf2, hash sha1: 996745 iterations per second.
# Data offset 4096, UUID 181fed4d-42f2-4f0f-8b70-cb7ba459e25f, digest iterations 121625
# Updating LUKS header of size 1024 on device /dev/sdb1
# Key length 32, device size 976771120 sectors, header size 2050 sectors.
# Reading LUKS header of size 1024 from device /dev/sdb1
# Key length 32, device size 976771120 sectors, header size 2050 sectors.
# Adding new keyslot -1 using volume key.
# Calculating data for key slot 0
# KDF pbkdf2, hash sha1: 1008246 iterations per second.
# Key slot 0 use 492307 password iterations.
# Using hash sha1 for AF in key slot 0, 4000 stripes
# Updating key slot 0 [0x1000] area.
# Using userspace crypto wrapper to access keyslot area.
IO error while encrypting keyslot.
# Releasing crypt device /dev/sdb1 context.
# Releasing device-mapper backend.
# Unlocking memory.
Command failed with code 5: IO error while encrypting keyslot.
Things also tend to hang with respect to the drive at this point. For example, fdisk -l spits out /dev/sda partitions immediately and then just hangs instead of printing out /dev/sdb info, then eventually quits (without ever writing it).
Any suggestions on where to look/how to troubleshoot? I found some possibly related posts, but nothing that looks promising:
- Impossible to crypt the drive using cryptsetup (fixed by rebooting)
- cryptsetup fails to open Udev cookie 0xd4d94f5 (semid 0) waiting for z (no responses; the hang after seems similar)
There's a couple odds and ends references to cryptsetup 1.6.6 having issues. I downloaded 1.6.4-1 and 1.6.5-1 and -2 from ARM to try, but wanted to post this in the meantime in case something stuck out.
Last edited by jwhendy (2015-05-29 16:01:40)

@qinohe I thought of that and the other day started formatting with mkfs.ext4; unfortunately, it was at work and I had to leave before I could let it finish. It had been chugging along a good few hours, and I was surprised it would take that long. I was able to format it with ext4 using Windows 7 (I dual boot) with the MiniTool Partition Wizard but I didn't use it like that before trying to solve the cryptsetup issue again.
This last time around, I was getting unresponsive behavior. I think I need to reboot each time I try something with cryptsetup, as any commands related to that drive seem to hang afterwards (fdisk, umount, eject, mkfs, or trying crypsetup again). Perhaps I'll just let it cook overnight with mkfs and see if I can at least have an unencrypted, but functional drive.
One interesting tidbit is that even though cryptsetup fails, when I've tried to issue mkfs afterward, it asks me to confirm that I want to format the disk since it has a LUKS header... so something appears to have been written. Is it possible the header is causing some issues? I don't know much about the structure of a disk (like what range the MBR resides in, what constitutes a header, etc.) but have been wondering if there's some way to start really, really clean with the disk. Like I'd just bought it -- something appears to be lingering around from previous efforts?
@frostschutz I'll check tomorrow. That's a good question. Just checked journalctl and here are some of the errors that appear; unfortunately, I wasn't watching so I can't tell you what matches up with what command:
May 23 09:32:22 arch_840 systemd-udevd[7784]: inotify_add_watch(7, /dev/sdb1, 10) failed: No such file or directory
May 23 09:32:22 arch_840 kernel: usb 3-4: stat urb: status -108
### there's lots like this; like 10 in a row with various sector values listed
May 23 09:32:19 arch_840 kernel: Buffer I/O error on dev sdb1, logical block 61341696, lost async page write
May 23 09:32:19 arch_840 kernel: blk_update_request: I/O error, dev sdb, sector 490735616
### there's also a bunch like this, from tab #0 -> #29 (not colored red, so not sure they're errors?)
May 23 09:32:19 arch_840 kernel: sd 2:0:0:0: [sdb] tag#0 CDB: opcode=0x2a 2a 00 1d 07 bc 10 00 04 00 00
May 23 09:32:18 arch_840 kernel: sd 2:0:0:0: [sdb] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
I paged down quite a ways and those seem like the unique messages when I search the journal for "sdb". Anything stand out? I will say that the same sector numbers appeared in multiple blocks of the third error type listed, so that makes me wonder if something is genuinely wrong with the disk. I'll post the output of the full smartctl scan when I hopefully run it tomorrow.
Thanks for chiming in!

[Partially Solved] Error with bsdtar and symbolic links

I'm trying to install a package (asymptote) from AUR but am running into an odd error. During the extract phase I get errors like
asymptote-1.70/base/asy-keywords.el: Can't update time for asymptote-1.70/base/asy-keywords.el: Function not implemented
bsdtar: Error exit delayed from previous errors.
I found a post that may help: http://bbs.archlinux.org/viewtopic.php?id=50750. Do I really have to do this?
By the way, I too am running on a Linode (Xen virtualization).
Thanks,
Luis
Last edited by banbh (2009-05-24 00:22:13)

I have not got to the bottom of my problems with bsdtar and symlinks. I suspect it must have something to do with either my configuration (derived from the Arch image provided by Linode) or running under virtualisation.
However, others might find my work-around useful, so I document it below.
I downloaded asymptote from AUR using wget ("wget http://aur.archlinux.org/packages/asymptote/asymptote.tar.gz"), unpacked it, then patched the PKGBUILD
$ diff -u PKGBUILD.orig PKGBUILD
--- PKGBUILD.orig 2009-05-23 17:58:47.000000000 -0400
+++ PKGBUILD 2009-05-23 18:00:49.000000000 -0400
@@ -11,9 +11,12 @@
'used if present at compile time: freeglut, gsl, fftw')
source=(http://downloads.sourceforge.net/sourceforge/asymptote/$pkgname-$pkgver.src.tgz)
md5sums=('1ded335bc63b662a6eb920a4c065706c')
+noextract=($pkgname-$pkgver.src.tgz)
build() {
- cd $srcdir/$pkgname-$pkgver
+ cd $srcdir
+ tar xzf $pkgname-$pkgver.src.tgz
+ cd $pkgname-$pkgver
./configure --enable-gc=/usr --prefix=/usr \
--with-latex=/usr/share/texmf/tex/latex || return 1
make asy || return 1
After that I simply did a "makepkg" followed by "sudo pacman -U asymptote-1.73-1-i686.pkg.tar.gz"

Error with calculations and printing output

Been a few months since I did any kind of java programming and cannot seem to figure out what is wrong with my program. It gives me an error with rentalCost when it goes to printout the value, does not seem calculate the values, and does not print any of the things I call for at the end. Maybe I need a seperate class or the if/else statements are wrong. The point of the program is for fun, but is to calculate the cost for a cabin based on certain coniditions the user inputs. Any help would be much appreciated. NOTE: There are no comments yet due to I put them in after I finish the program.
import java.util.Scanner;
public class Test
     public static void main (String [] args)
          String season, cabinGrade;
          double rentalCost, days, finalCost;
          Scanner input = new Scanner(System.in);
          System.out.print("What season will you be staying during? ");
          season = input.nextLine();
          System.out.print("What kind of cabin? ");
          cabinGrade = input.nextLine();
          System.out.print("How many days are you staying? ");
          days = input.nextDouble();
          input.close();
          if (season == "pre-season" && cabinGrade == "regular" && (days < 7))
               rentalCost = ((days * 55) * .9) * 1.0925;
          else if(season == "pre-season" && cabinGrade == "regular" && (days >= 7))
               { days = days - 7;
                 rentalCost = ((300 + (days * 55)) * .9) * 1.0925;
          else if(season == "out-of-season" && cabinGrade == "regular" && (days < 7))
               rentalCost = ((days * 55) * .75) * 1.0925;
          else if(season == "out-of-season" && cabinGrade == "regular" && (days >= 7))
               { days = days - 7;
                 rentalCost = ((300 + (days * 55)) * .75) * 1.0925;
          else if(season == "pre-season" && cabinGrade == "luxury" && (days < 7))
               rentalCost = ((days * 100) * .85) * 1.0925;
          else if(season == "pre-season" && cabinGrade == "luxury" && (days >= 7))
               { days = days -7;
                 rentalCost = ((600 + (days * 100)) * .85) * 1.0925;
          else if(season == "out-of-season" && cabinGrade == "luxury" && (days < 7))
                    rentalCost = ((days * 100) * .75) * 1.0925;
          else if(season == "out-of-season" && cabinGrade == "luxury" && (days >= 7))
               { days = days -7;
                 rentalCost = ((600 + (days * 100)) * .75) * 1.0925;
          else if(season == "prime" && cabinGrade == "regular" && (days < 7))
               rentalCost = (days * 55) * 1.0925;
          else if(season == "prime" && cabinGrade == "regular" && (days >= 7))
               { days = days - 7;
                 rentalCost = (300 + (days * 55)) * 1.0925;
          else if(season == "prime" && cabinGrade == "luxury" && (days < 7))
               rentalCost = (days * 100) * 1.0925;
          else if(season == "prime" && cabinGrade == "luxury" && (days >= 7))
               { days = days - 7;
                 rentalCost = (600 + (days * 100)) * 1.0925;
          System.out.println("Season : " + season);
          System.out.println("Cabin grade: " + cabinGrade);
          System.out.println("No. of days: " + days);
          System.out.println("Rental cost: " + rentalCost);
}

Lgndryhr wrote:
Been a few months since I did any kind of java programming and cannot seem to figure out what is wrong with my program. Maybe I need a seperate class or the if/else statements are wrong. The point of the program is for fun, but is to calculate the cost for a cabin based on certain coniditions the user inputs. Any help would be much appreciated. NOTE: There are no comments yet due to I put them in after I finish the program.
At the very least you need to tell us what you expected this code to do and what it actually did...

Audio error with garageband and external usb audio interface

I am using Garageband 2.0.3. under ios 8.0.2 on my iPad 3 and via camera adapter a USB audio interface Focusrite Scarlett 2i4 or a Presonus iTwo.
When I start Garageband, it works well, the audio interfaces are recognized and I can record a track.
As soon as I switch from instrumtent to track view, the audio path is completely disturbed and all I can hear is some noise from the speaker.
Then I have to unplug the usb cable and plug it in again. Then audio works until I switch back to the instrument menu.
When I use the headphone output only there is no problem with Garageband and everything works fine.
Other applications audio applications don't show any error with each of the two audio interfaces.
Any feedback is very much appreciated, thanks.
Harald

I have this exact issue. However, I tried the Loopy app after after GB crashed and received an error message saying that core audio is not available. Rebooting resolves but the problem repeats. Any suggestions as to fixes? Btw; I have no such problem with Ipad 2 and ios 7.

Constant & erratic "Page Load Error" with Safari and Firefox

A week or two ago, I started getting constant "Page Load Errors" ('this page cannot be found', etc) when browsing with either Safari or Firefox. These are not dead sites that time out, but are very live (and cannot be summoned no matter how many times refresh)!
Something is wrong on my computer's end: I have strong wireless, have tried connecting with ethernet, and have used a different network. All of these produce the same result, where about half of the sites I try to connect to are instantly declared as dead by any browser I use.
I am not using any firewall, and have emptied both browser's caches.
Any ideas would be greatly appreciated.
Thanks!
Cliff

I'm having the same problem. It only happens at home over my DSL connection. Here is what I have tried and the results.
This really started bothering me since I upgraded to a recent Macbook Pro. I tried my original MBP with Leopard and found it doing the same thing. I ended up testing from my G4 and it works fine. The problem occurs over wireless and wired. I tried changing my MTU size with no change. I thought it was DNS but changed to other DNS and it didn't make a difference. Happens in Safari and Firefox. I am thinking it has an effect on iTune store also. The problem goes away when I VPN in to work, comes back when I close the VPN.
Just tonight I installed an clean 10.5 Leopard on my original MBP. Safari works perfectly. Instead of updating to 10.5.6, I download the 10.5.5 update. After updating the problem reappeared.
Again, my G4 with latest Tiger update work fine and both Macbook Pros with the latest Leopard have a problem over my DLS connection. They work perfectly fine at work and other locations.
Ted

Weird error with division and float

I'm trying to write a program (which is due tomorrow) which draws an ellipse with horizontal and vertical radii input by the user. Now, for whatever reason, when I divide two numbers and put the answer in a double, it disregards the decimal (so when the answer is less than one, it gives me 0.0)
Why is it doing that and what can I do to fix it?

Heh. I actually figured that out before you posted,
but thanks for the response.Most had that figured out before you even made your original posting so don't be too cocky now -:)

Compile errors with Solaris 5.8 and Studio 11 with latest patches

I asked sa to patch my studio 11, and they applied patches 121023-04, 121015-04, 121017-08, 122142-03, 120761-03, 120760-11 and 122135-02. Then, I compiled my boost_1_33_1 again. It built some, but not all libraries. It stil spit out the following errors. Is this expected?
"/home/vcheng/boost_1_33_1/libs/filesystem/build/../src/operations_posix_windows.cpp", line 126: Error: readdir_r is not a member of file level.
...failed sunpro-C++-action build_sunos/bin/boost/libs/filesystem/build/libboost_filesystem.a/sunpro/debug/operations_posix_windows.o...
sunpro-C++-action build_sunos/bin/boost/libs/wave/build/libboost_wave.a/sunpro/debug/instantiate_cpp_exprgrammar.o
"/home/vcheng/boost_1_33_1/boost/spirit/core/composite/epsilon.hpp", line 76: Error: complex expression not allowed in dependent template argument expression.
"/home/vcheng/boost_1_33_1/boost/iostreams/device/file_descriptor.hpp", line 79: Warning: close_on_exit hides boost::iostreams::file_descriptor::impl::close_on_exit.
1 Warning(s) detected.
"/home/vcheng/boost_1_33_1/libs/iostreams/build/../src/bzip2.cpp", line 42: Error: BZ_CONFIG_ERROR is not defined.
"/home/vcheng/boost_1_33_1/libs/iostreams/build/../src/bzip2.cpp", line 106: Error: The function "BZ2_bzCompressEnd" must have a prototype.
"/home/vcheng/boost_1_33_1/libs/iostreams/build/../src/bzip2.cpp", line 107: Error: The function "BZ2_bzDecompressEnd" must have a prototype.
"/home/vcheng/boost_1_33_1/libs/iostreams/build/../src/bzip2.cpp", line 113: Error: The function "BZ2_bzCompress" must have a prototype.
"/home/vcheng/boost_1_33_1/libs/iostreams/build/../src/bzip2.cpp", line 118: Error: The function "BZ2_bzDecompress" must have a prototype.
"/home/vcheng/boost_1_33_1/libs/iostreams/build/../src/bzip2.cpp", line 143: Error: The function "BZ2_bzCompressInit" must have a prototype.
"/home/vcheng/boost_1_33_1/libs/iostreams/build/../src/bzip2.cpp", line 147: Error: The function "BZ2_bzDecompressInit" must have a prototype.
"/home/vcheng/boost_1_33_1/libs/program_options/build/../src/cmdline.cpp", line 97: Warning: args hides boost::program_options::detail::cmdline::args.
"/home/vcheng/boost_1_33_1/libs/program_options/build/../src/cmdline.cpp", line 100: Warning: args hides boost::program_options::detail::cmdline::args.
"/home/vcheng/boost_1_33_1/libs/program_options/build/../src/cmdline.cpp", line 110: Warning: args hides boost::program_options::detail::cmdline::args.
"/home/vcheng/boost_1_33_1/libs/program_options/build/../src/cmdline.cpp", line 349: Warning: args hides boost::program_options::detail::cmdline::args.
"/home/vcheng/boost_1_33_1/libs/program_options/build/../src/cmdline.cpp", line 383: Warning: args hides boost::program_options::detail::cmdline::args.
"/home/vcheng/boost_1_33_1/libs/program_options/build/../src/cmdline.cpp", line 437: Warning: args hides boost::program_options::detail::cmdline::args.
"/home/vcheng/boost_1_33_1/libs/program_options/build/../src/cmdline.cpp", line 458: Warning: args hides boost::program_options::detail::cmdline::args.
"/home/vcheng/boost_1_33_1/libs/program_options/build/../src/cmdline.cpp", line 477: Warning: args hides boost::program_options::detail::cmdline::args.
"/home/vcheng/boost_1_33_1/libs/program_options/build/../src/cmdline.cpp", line 495: Warning: args hides boost::program_options::detail::cmdline::args.
"/home/vcheng/boost_1_33_1/libs/program_options/build/../src/config_file.cpp", line 35: Warning: allowed_options hides boost::program_options::detail::common_config_file_iterator::allowed_options.
"/home/vcheng/boost_1_33_1/libs/program_options/build/../src/options_description.cpp", line 311: Error: Could not find a match for std::count<std::InputIterator, std::T, std::Size>(char*, char*, char) needed in::format_paragraph(std::ostream &, std::string, unsigned, unsigned).
"/home/vcheng/boost_1_33_1/libs/program_options/build/../src/options_description.cpp", line 378: Error: Too few arguments for template std::reverse_iterator.
"/.automount/opt/Forte/sunstudio11_patch1/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 432: Error: "friend" declaration is incompatible with function template.
"/home/vcheng/boost_1_33_1/libs/program_options/build/../src/options_description.cpp", line 378: Where: While specializing "std::reverse_iterator<const char*>".
"/home/vcheng/boost_1_33_1/libs/program_options/build/../src/options_description.cpp", line 378: Where: Specialized in non-template code.
"/home/vcheng/boost_1_33_1/libs/program_options/build/../src/options_description.cpp", line 379: Error: Too few arguments for template std::reverse_iterator.
"/home/vcheng/boost_1_33_1/libs/program_options/build/../src/options_description.cpp", line 387: Error: Could not find a match for std::distance<std::ForwardIterator, std::Distance>(const char*, const char*) needed in::format_paragraph(std::ostream &, std::string, unsigned, unsigned).

You can take Boost 1.34 but you have to use CVS and you have to modify Boost configuration files to use -library=stlport4 option.
Or you can take Boost 1.32, read this article http://blogs.sun.com/roller/page/sga?entry=boost_mini_howto and apply this patch http://blogs.sun.com/roller/resources/sga/boost_1_32_0.patch.
As you can see here http://engineering.meta-comm.com/boost-regression/CVS-RC_1_34_0/developer/summary.html Sun C++ is in a good shape.

Error with WebServices and object hierarchy

Hello,
I'm using Web Services (deployed on Axis Server) with SJC. SJC don't understood the object hierarchy. It's seem to be the same problem than in post http://forum.sun.com/jive/thread.jspa?forumID=123&threadID=50290 and
http://forum.sun.com/jive/thread.jspa?forumID=123&threadID=52967.
I have 3 classes.
GrandSon
Son with an array of GrandSon
Father with an array of Son
The class :
Father :
package test;
public class Father {
     private Son[] theSons;
     public Father()
          theSons = new Son[2];
          theSons[0] = new Son();
          theSons[1] = new Son();
     public Son[] getSons()
          return theSons;
Son :
package test;
public class Son {
     private String name = "Son";
     private GrandSon[] grandSons;
     public Son()
          grandSons = new GrandSon[2];
          grandSons[0] = new GrandSon();
          grandSons[1] = new GrandSon();
     public String getName()
          return name;
     public GrandSon[] getGrandSons()
          return grandSons;
GrandSon
package test;
public class GrandSon {
     String name;
     public String getName()
          return "I'm a Grandson";
I'm creating the webService from Father JavaBean. Here is the WSDL file generated by wtp plugin for Eclipse :
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions targetNamespace="http://test" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://test" xmlns:intf="http://test" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">

<wsdl:types>
<schema elementFormDefault="qualified" targetNamespace="http://test" xmlns="http://www.w3.org/2001/XMLSchema">
<element name="getSons">
<complexType/>
</element>
<element name="getSonsResponse">
<complexType>
<sequence>
<element maxOccurs="unbounded" name="getSonsReturn" type="impl:Son"/>
</sequence>
</complexType>
</element>
<complexType name="GrandSon">
<sequence>
<element name="name" nillable="true" type="xsd:string"/>
</sequence>
</complexType>
<complexType name="ArrayOfGrandSon">
<sequence>
<element maxOccurs="unbounded" minOccurs="0" name="item" type="impl:GrandSon"/>
</sequence>
</complexType>
<complexType name="Son">
<sequence>
<element name="grandSons" nillable="true" type="impl:ArrayOfGrandSon"/>
<element name="name" nillable="true" type="xsd:string"/>
</sequence>
</complexType>
</schema>
</wsdl:types>
<wsdl:message name="getSonsRequest">
<wsdl:part element="impl:getSons" name="parameters"/>
</wsdl:message>
<wsdl:message name="getSonsResponse">
<wsdl:part element="impl:getSonsResponse" name="parameters"/>
</wsdl:message>
<wsdl:portType name="Father">
<wsdl:operation name="getSons">
<wsdl:input message="impl:getSonsRequest" name="getSonsRequest"/>
<wsdl:output message="impl:getSonsResponse" name="getSonsResponse"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="FatherSoapBinding" type="impl:Father">
<wsdlsoap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="getSons">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getSonsRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="getSonsResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="FatherService">
<wsdl:port binding="impl:FatherSoapBinding" name="Father">
<wsdlsoap:address location="http://localhost:8080/webServiceSimple/services/Father"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
When I try to call my Web Service in Sun Java Creator, I have this error message :
InvocationTargetException com.sun.rave.websvc.ui.ReflectionHelper.callMethodWithParams(ReflectionHelper.java:459)
com.sun.rave.websvc.ui.TestWebServiceMethodDlg$MethodTask.run(TestWebServiceMethodDlg.java:1031)
java.lang.Thread.run(Thread.java:595)
null sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585) com.sun.rave.websvc.ui.ReflectionHelper.callMethodWithParams(ReflectionHelper.java:450)
com.sun.rave.websvc.ui.TestWebServiceMethodDlg$MethodTask.run(TestWebServiceMethodDlg.java:1031)
java.lang.Thread.run(Thread.java:595)
deserialization error: unexpected XML reader state. expected: END but found: START
Runtime exception; nested exception is: deserialization error: unexpected XML reader state. expected: END but found: START: {http://test}grandSons
com.sun.xml.rpc.client.StreamingSender._handleRuntimeExceptionInSend(StreamingSender.java:318)
com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:300)
webservice.Father_Stub.getSons(Father_Stub.java:68)
webservice.fatherservice.FatherServiceClient.getSons(FatherServiceClient.java:29)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) java.lang.reflect.Method.invoke(Method.java:585)
com.sun.rave.websvc.ui.ReflectionHelper.callMethodWithParams(ReflectionHelper.java:450) com.sun.rave.websvc.ui.TestWebServiceMethodDlg$MethodTask.run(TestWebServiceMethodDlg.java:1031)
java.lang.Thread.run(Thread.java:595)
deserialization error: unexpected XML reader state. expected: END but found: START: {http://test}grandSons
com.sun.xml.rpc.encoding.literal.LiteralObjectSerializerBase.deserialize(LiteralObjectSerializerBase.java:128) webservice.Son_LiteralSerializer.doDeserialize(Son_LiteralSerializer.java:54)
com.sun.xml.rpc.encoding.literal.LiteralObjectSerializerBase.internalDeserialize(LiteralObjectSerializerBase.java:216)
com.sun.xml.rpc.encoding.literal.LiteralObjectSerializerBase.deserialize(LiteralObjectSerializerBase.java:124)
webservice.GetSonsResponse_LiteralSerializer.doDeserialize(GetSonsResponse_LiteralSerializer.java:53)
com.sun.xml.rpc.encoding.literal.LiteralObjectSerializerBase.internalDeserialize(LiteralObjectSerializerBase.java:216)
com.sun.xml.rpc.encoding.literal.LiteralObjectSerializerBase.deserialize(LiteralObjectSerializerBase.java:124)
webservice.Father_Stub._deserialize_getSons(Father_Stub.java:115)
webservice.Father_Stub._readFirstBodyElement(Father_Stub.java:102)
com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:215)
webservice.Father_Stub.getSons(Father_Stub.java:68)
webservice.fatherservice.FatherServiceClient.getSons(FatherServiceClient.java:29)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) java.lang.reflect.Method.invoke(Method.java:585)
com.sun.rave.websvc.ui.ReflectionHelper.callMethodWithParams(ReflectionHelper.java:450)
com.sun.rave.websvc.ui.TestWebServiceMethodDlg$MethodTask.run(TestWebServiceMethodDlg.java:1031)
java.lang.Thread.run(Thread.java:595)
The SOAP communication seems to be correct. I'm sniffing the communication channel:
Request from SJC:
POST /webServiceSimple/services/Father HTTP/1.1
Content-Type: text/xml; charset=utf-8
Content-Length: 335
SOAPAction: ""
Cache-Control: no-cache
Pragma: no-cache
User-Agent: Java/1.5.0_06
Host: 127.0.0.1:8081
Accept: text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2
Connection: keep-alive
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:enc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns0="http://test"><env:Body><ns0:getSons/></env:Body></env:Envelope>
Response from AXIS ( I have corrected text indentation) :
HTTP/1.1 200 OK
Content-Type: text/xml;charset=utf-8
Transfer-Encoding: chunked
Date: Thu, 24 Aug 2006 12:44:27 GMT
Server: Apache-Coyote/1.1
292
<?xml version="1.0" encoding="utf-8"?><soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body><getSonsResponse xmlns="http://test">
<getSonsReturn>
<grandSons>
<grandSons>
<name>I'm a Grandson</name>
</grandSons>
<grandSons>
<name>I'm a Grandson</name>
</grandSons>
</grandSons>
<name>Fils</name>
</getSonsReturn>
<getSonsReturn>
<grandSons>
<grandSons>
<name>I'm a Grandson</name>
</grandSons>
<grandSons>
<name>I'm a Grandson</name>
</grandSons>
</grandSons>
<name>Fils</name>
</getSonsReturn>
</getSonsResponse>
</soapenv:Body></soapenv:Envelope>
0
I suppose that the version of SOAP used in AXIS and in SJSC may be different. Array's definition have been changed in version SOAP 1.2.
Here an array is described like this :
<grandSons> <- ARRAY
<grandSons> <-OBJECT : ARRAY[0]
</grandSons>
<grandSons><-OBJECT : ARRAY[1]
</grandSons>
</grandSons>
Probably explains this message :
deserialization error: unexpected XML reader state. expected: END but found: START: item
Somebody have an idea ?
Thanks.

Hi Frank,
I've checked further, and for testing, I have made a change to the sample Reference Cursor package code (NVL'd the parameter), but I still get the same error:
CREATE OR REPLACE PACKAGE BODY RefCursorExample IS
FUNCTION get_requests_for_tech(p_email VARCHAR2) RETURN ref_cursor IS
    the_cursor ref_cursor;
BEGIN
    OPEN the_cursor FOR
      SELECT sr.svr_id, sr.status, sr.problem_description
        FROM service_requests sr, users u
     WHERE sr.assigned_to = u.user_id
       AND u.email = NVL(p_email,u.email);
    RETURN the_cursor;
END get_requests_for_tech;
FUNCTION count_requests_for_tech(p_email VARCHAR2) RETURN NUMBER IS
    the_count NUMBER;
BEGIN
    SELECT COUNT(*)
      INTO the_count
      FROM service_requests sr, users u
     WHERE sr.assigned_to = u.user_id
       AND u.email = NVL(p_email,u.email);
    RETURN the_count;
END count_requests_for_tech;
END RefCursorExample;My issue is that it works with NULL for the parameter in the Business Component Browser (BCB), but when I get to the JSF ExecuteWithParams the application looks like it expects NOT NULL when NULL should work. Is there a way to trace where this is happening? Since the BCB works, can I assume it is the JSF side that is causing this? I have already turned on my logging to FINE in logging.properties, and I can't seem to find why this is being triggered...
java.util.logging.ConsoleHandler.level = FINE
com.sun.faces.level=FINE
Thanks!
Kenton

HTTP2302 error with tomcat and linux environment

We are using Sun Java(TM) System Web Server 7.0 with Tomcat 6.0.14 in Linux environment. We are frequently facing "Service Unavailable error" in the frontend . while verifying the logs we found the details as below :
could you guinde what could be issue here ?
In Webserver log the following error thrown many times
func_exec reports: HTTP2302: Function jk_service aborted the request without setting the status code
We are using the tomcat connector nsapi_redirector-1.2.26-sjsws6.1sp11.so in our environment
nsapi.log
[Thu Nov 19 06:22:11.602 2009] [20843:4074314640] [debug] jk_open_socket::jk_connect.c (448): socket TCP_NODELAY set to On
[Thu Nov 19 06:22:11.602 2009] [20843:4074314640] [debug] jk_open_socket::jk_connect.c (548): trying to connect socket 30 to 160.254.92.190:8051
[Thu Nov 19 06:22:11.602 2009] [20843:4074314640] [info] jk_open_socket::jk_connect.c (566): connect to 160.254.92.190:8051 failed (errno=111)
[Thu Nov 19 06:22:11.602 2009] [20843:4074314640] [info] ajp_connect_to_endpoint::jk_ajp_common.c (869): Failed opening socket to (160.254.92.190:8051) (errno=111)
[Thu Nov 19 06:22:11.602 2009] [20843:4074314640] [error] ajp_send_request::jk_ajp_common.c (1359): (ajp13) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=111)
[Thu Nov 19 06:22:11.602 2009] [20843:4074314640] [info] ajp_service::jk_ajp_common.c (2186): (ajp13) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2)
[Thu Nov 19 06:22:11.602 2009] [20843:4074314640] [error] ajp_service::jk_ajp_common.c (2204): (ajp13) Connecting to tomcat failed. Tomcat is probably not started or is listening on the wrong port
[Thu Nov 19 06:22:11.602 2009] [20843:4074314640] [error] jk_service::jk_nsapi_plugin.c (398): service() failed with http error 503
[Thu Nov 19 06:22:11.602 2009] [20843:4074314640] [debug] ajp_reset_endpoint::jk_ajp_common.c (691): (ajp13) resetting endpoint with sd = 4294967295 (socket shutdown)
[Thu Nov 19 06:22:11.602 2009] [20843:4074314640] [debug] ajp_done::jk_ajp_common.c (2522): recycling connection pool slot=0 for worker ajp13
h1. Obj.conf
<Object name="default">
AuthTrans fn="match-browser" browser="*MSIE*" ssl-unclean-shutdown="true"
<If $uri =~ '^/$'>
NameTrans fn="redirect" from="/" url="http://wikitest.pershing.com/confluence/" code="301"
</If>
NameTrans fn="assign-name" from="/confluence/*" name="servlet"
PathCheck fn="uri-clean"
PathCheck fn="check-acl" acl="default"
PathCheck fn="find-pathinfo"
PathCheck fn="find-index" index-names="index.html,home.html,index.jsp"
ObjectType fn="type-by-extension"
ObjectType fn="force-type" type="text/plain"
Service method="(GET|HEAD|POST)" type="*~magnus-internal/*" fn="send-file"
Service method="TRACE" fn="service-trace"
AddLog fn="flex-log"
</Object>
<Object name="j2ee">
Service fn="service-j2ee" method="*"
</Object>
<Object name="es-internal">
PathCheck fn="check-acl" acl="es-internal"
</Object>
<Object name="cgi">
ObjectType fn="force-type" type="magnus-internal/cgi"
Service fn="send-cgi"
</Object>
<Object name="send-precompressed">
PathCheck fn="find-compressed"
</Object>
<Object name="compress-on-demand">
Output fn="insert-filter" filter="http-compression"
</Object>
<Object name="servlet">
ObjectType fn="force-type" type="text/html"
Service fn="jk_service" worker="ajp13"
</Object>

Hi, The reason tomcat had to be used is that the software is bundled with tomcat. Hence we are in the following configuration:
-Sun Web Server 7.0 update 5
-Tomcat 6, Using JRE1.6
-The server runs Linux.
-As for the tomcat web server plugin, the 32-bit tomcat connector is downloaded from http://archive.apache.org/dist/tomcat/tomcat-connectors/jk/binaries/solaris/jk-1.2.26/sparc/
With this configuration. seems when we refresh a page quickly, we get "service unavailable error". But if we only put web contents, the issue does not exist. Looks like the issue resides in the plugin....
Any help is greatly appreciated

IaStor Event ID 9 error with T420s and OCZ-Agility3

Hello, I need your help, as I've been battling this issue for the last 3 days and I'm extremely frustrated.
I'm running a Lenovo T420s (4170CTO) and replaced the IDE HD with a SSD OCZ-Agility3.
I am getting iaStor Event ID9 error in my system event log, with the system constantly freezing, halting, chocking, usually for about 5 minutes, then it unlocks itself, or at times never recovering.
I flashed the OCZ Drive Firmware to the latest 2.08
I flashed the Bios of the Lenovo 420s to 1.13
I also started over by cloning the default Lenovo install from the original drive onto the SSD so all lenovo install drivers are present. I also updated all the drivers, including the latest Intel Rapid Story Technology driver for the Intel Mobile Express Chipset SATA AHCI Controller.
Please let me know if you have advice on how to resolve the iaStor error. Very furstrating, the combo of the laptop and the SSD is extremely fast when it works, but the frequent crashes and lock ups are making me go nuts.
Thanks,
Ivan.

have you tried disable Intel Link Power Management (LPM)? it fixes some iaStor timeout errors for certain SSD.

I restored my Macbook Pro and now I can't log in as Admin - it says there is an error with FileVault and I don't have access - plz help! thank you.

I had to restore my Macbook Pro from Time Capsule yesterday and now when I go to log in as my usual Admin, it says there is a FileVault error and my access is denied. I created another temporary Admin acct, but everything I had on my desktop, etc is "gone" I can look up the "drive' or wahtever it's called, but I can't access any of it. All I want to do is log back in as my usual self (the regular Admin) - plz help! Thanks. p.s. I"m (obviously) not that computer savvy!

Triple-click the line below to select it:
/System/Library/CoreServices/Directory Utility.app
Rght-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* The application Directory Utility will open.
In the Directory Utility window, click the lock icon and authenticate. Select the Directory Editor tool in the toolbar. Select Users from the Viewing menu in the toolbar, if not already selected. Select the affected user account in the list. On the right is a list of properties and values. Select the property "HomeDirectory" and delete it by clicking the minus-sign icon directly below the property list. There are two such icons in the window. You want the one on the right, not the one on the left.
CAUTION: Do not click the minus-sign icon on the left, below the user list.
Then click the Save button in the lower right corner of the window. Quit Directory Utility.
CAUTION: There is no "undo" in Directory Utility. If you make a mistake and delete something in the Directory Editor that should not have been deleted, restore your whole system from a backup and start over. I have no other help to offer in that case.
Try again to log in as the affected user. If you can log in, you should find a file in the home folder with the name of the user and the filename extension "sparseimage" or "sparsebundle". Double-click that file. A disk image should open. Copy your files from that disk image to restore them.
I strongly suggest that you deactivate legacy FileVault in the Security & Privacy preference pane, then log out and log back in. Consider activating FileVault 2 if you want that kind of security.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

Convert HTML ASCII codes with JSTL and Apache Taglibs?

I am building a web application using JSTL and some of the Apache Taglibs, so these are the taglibs I have at my disposal currently. What I am looking for is the ability to handle the ' that appears in submitted search strings which contain the ' character. SQL seems to be able to handle other special characters (such as &, [, ", etc) but I can't get it to get along with the '. I have tried using a <string:replace replace="'" with="\'"> to escape the ', but this doesn't seem to work either. Any suggestions? Let me know if you need more information to be able to fully understand the situation.
--Ioeth

By the way, the search string that a user enters is getting Tokenized using " " as the token and then fed directly into multiple SQL LIKE comparisons based on how many tokens were found.

Error with Solaris 8 and Apache 2.0.39

Similar Messages

Maybe you are looking for