Error with Sound Blaster Audigy 2 installation...driv

Hi
I am really stuck with this issue and was wondering if someone out there could help. I have an Audigy 2, and have had it working for a long period of time. I had to re install Windows not so long ago and since then I have found a number of errors with my sound.
Firstly there are a lot of pops and clicks when either gaming or playing audio files. Admittedly the pops and clicks happen a lot more when gaming (multiple sounds playing at once ?).
Therefore I decided to come onto creatives site and download the new drivers for my sound card. I was still running the original drivers from the CD supplied, so felt it was about time.
I downloaded the file SBA2_PCWDRV_LB__84_55-R, which is the correct update for my card and tried to install it.
It comes up with a message:
Setup could not detect and Sound Blaster Audigy 2 on you system.
Please ensure that your sound blaster hardware is properly installed before running this setup program.
setup will not exit
After that message i was a little confused, because as far as I was concerned everything was working ok, sound was coming out and was coming out correctly from my 5. surround system.
So i double clicked on the Creative Volume Control to check everything was on.
I'm not sure if this is an error but a long the top where you select the output device mine says:
SB Audigy [A000]
I'm not 00% sure but I don't think it said that before, I think it said something else, but I could be wrong.
I decided to uninstall my sound card and re-install. Everything installed absolutely fine from the CD, recognised the card and no complaints.
So I tried to re-install the driver update, and same message. (And the output device is still SB Audigy [A000].
Again I uninstalled and tried the Beta patch on the off chance that that would work, still nothing, it does not recognise the card in my computer.
I definately have an Audigy 2 and it has worked properly allowing me to update it before.
Sorry to have such a long message, but I am really confused about all of this and would really like to get everything working properly.
Any advice and help would be appreciated.
Thanks

fedepolito,
I assume that you are running WinXP with Service Pack 3. Did you do a clean sweep of all the Creative Software and reinstall from the A2ZS CD? Do you get sound then?
Me disculpo que no entend?a que todo que usted dijo en su poste. Asumo que usted est? funcionando Windows XP con el Service Pack 3. ?Usted hizo un retiro del barrido limpio de todo el Creative software? (Busque los foros para el "clean sweep." ) ?Despu?s de eso, cuando usted reinstala del CD de Audigy 2 ZS, usted consigue el sonido?
Message Edited by Katman on 03-29-2009 2:59 [email protected]

Similar Messages

Sound Blaster Audigy SE Driver Prob

I have a problem with Sound Blaster Audigy SE,
Im using newest from creative download site SBA_PCDRV_LB__04_006.exe drivers.
After I turn on a game like ut2004, fear combat, even dxdiag (sound test) or pause sound in music/movie player system stops reacting or process "System" uses 95-00% of my CPU.
After few tests I discovered with help of KrView (kernel view soft) that p7filt.sys uses such big ammount of cpu If in Speaker Settings, Bass Redirection and Subwoofer Gain (+5) is turned on. (5. speakers)
I installed a bit diffrent version of drivers (from cd and even later I tested SBSE7_XP_Jul2005 additional driver). But then Subwoofer Gain option isnt working at all
its written Subwoofer Gain (+0) and with sub gain +0 sound quality very poor like in AC97 audio.
Ive also checked friends sound card on my pc and also i've tested exactly same thing on other computer.
I have xp sp2 with updates, newest bios, directX, etc etc...
Pentium 4 2.4
MSI 845PE Max
Geforce 6600GT
536 DDR Ram
Windows XP SP2Message Edited by Efrin on 04-09-2007:38 AM

OK..first of all the Audigy SE lacks any form of hardware acceleration, so turning on features like bass boosting/sound post-processing etc. will take away a lot of CPU time. The file you mentioned just acts as a software real-time filter, although it should not go up to the point of bringing a 2.4 Ghz Pentium 4 to its knees.
The sound quality will be altered even with every "DSP" effect (quoted because there's no actual hardware DSP, it's just emulated in software) set to 0, as long as the "DSP is considered acti've.
That's because the sound output is first converted from the time domain to the frequency domain (in poor words, the continuous sound wave you hear is broken down in many different frequencies like in those 80s ghettoblasters spectrum analyzers) because it's easier to amplify bass/treble that way, and then converted back to time domain (in even poorer words, a continuous sound wave you can hear/record/playback).
It's obvious that doing that thing in real time has a CPU cost, and even more obvious that the procedure is lossy and the input will not be the same as the output even with no effect applied, as long as the this double conversion takes place.
If you really need bass boost, turn any sound processing on the card OFF, and use speakers which have it. Also, if the CPU usage is abnormally high, try updated or a specific older version of the drivers that has more reasonable CPU usage/doesn't have that bug.

Help with Sound Blaster Audigy Value 24-bit..keeps crashing when connecting to the inter

pls help..every time i connect to the internet while playing mp3's or just any applications or programs that produces sound and even when streaming some clips through the internet, my computer restarts..any sound that is produced when i am online it will restart..but if i just surf the net without playing anything..it works fine...
how cn i solve this problem..
pls help..thnx
my spec:
AMD Sempron 2400+
Epox 8rda3i
Seagate 80gb
Palit GeForce 6600gt
Creative Sound Blaster Audigy Value 24-bit

screwguy_28 wrote:
is this the one?
IRQ 0 System timer OK
IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM) OK
IRQ 5 Uni'versal Serial Bus (USB) Controller OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 9 SCSI/RAID Host Controller OK
IRQ 0 MPU-40 Compatible MIDI Device OK
IRQ NVIDIA nForce PCI System Management OK
IRQ 2 PS/2 Compatible Mouse OK
IRQ 3 Numeric data processor OK
IRQ 4 Primary IDE Channel OK
IRQ 6 Sound Blaster Audigy OK
IRQ 8 SoftV92 Data Fax Modem OK
IRQ 9 NVIDIA GeForce 6600 GT OK
IRQ 2 Standard OpenHCD USB Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
jutapa

Capturing laserdisc AC3 signal with Sound Blaster Audigy 2 ZS Platinum

I'm considering converting my laserdisc collection over to DVD.
As far as PC hadware is concerned, I have the ATI All-In-Wonder 9800 Pro and the Sound Blaster Audigy 2 ZS Platinum Pro.
My system in a 3.2G P4 on a Intel D875PBZ board w/ 2Gig of memory. Connected are 3 dri'ves, (2) 250G SATA dri'ves and () old 250G IDE dri've that I keep archi'ves on.
The laserdisc player has the following:
AC-3 Bit Stream / PCM Optical Output AC-3 Bit Stream / PCM Coaxial Output PCM Coaxial Output
I was planning to use the optical input of the soundcard but was unsure what to use to capture the digital stream to capture the entire surround channel info. Normally audio is captured as an uncompressed WAV and then converted to AC3 which to me is a wasted step since it's only going to wind up as AC3 again
I've used Virtual dub in the past to capture TV broadcasts, but I seem to be at a loss on this current venture. Any assistance will be great

Alright, let me just double check...
As long as the output from my laserdisc is 48K then things should work fine and I should receive the entire unadulterated stream, no data padding or modification. If it's not 48k then it won't. This is as long as I save it as 2. PCM audio stream
The audiobitrate for AC3 should be at 384k, and this will be preserved using the above method?
From what I'm reading, this unprocessed stream should sound like white noise. Once processed by cooledit , Soundforge or besweet I should have the DD 5. soundtrack intact and not a 2 channel AC stream?
Sorry if I am rephrasing things but I just want to be absolutly certain when I start this project .
Message Edited by madmax66 on -6-2004 02:40 AM

Problems With Sound Blaster Audigy: New Sys

I just received my new computer from Dell:
Pentium D 3.0ghz
Geforce 7800 GTX 256mb
2 GIGs ram
Windows Xp Prof x64
SoundBlaster Audigy
My problem occurs in my game called Nascar Racing 2003 Season. The sounds play fine, however when It comes time to load more 3dimensional sounds (like cockpit), the sounds turn into a high pitched buzz, and then freezes my computer so that not even ctl-alt-del works. Sometimes this happens when exiting the game as well, and my system does a complete memory dump and then shows this file: ctoss2k.sys..
I've reinstalled the drivers, the game, and I'm out of ideas. I don't have any other games to test this one, but I've run the Dell diagnostics and run the dxdiag for the sound and it passed with flying colors. If nothing can be done here my next idea is getting on the phone with Dell and having them fix my new computer!
Any help would be greatly appreciated!
P.S. On my last computer I had Sound Blaster Li've! and that worked perfectlyMessage Edited by mciarlo on -0-2005 04:05 AM

Noticed your setup (XP PRO 64)
Correct me if Im wrong but I dont think there are drivers for 64bit yet Right?

Problems With Sound Blaster Audigy 2

The Problem that I'm having is this:
Every time that i bring up the volume console to do whatever, once i move the mouse cursor into the window, my computer either restarts or locks up. Now I have tried over and over again to update all drivers and software for this sound card. Even thinking that it might be a compatibility issue with other cards (video, wireless) i updated their drivers as well. Doing so made me run into other problems, like opening up office Word, just locks up. I never had these problems before at all until i installed this sound card. Now, the card works perfectly! Sound comes out in all respecti've ports and microphone and line in works as well. Its the software that I cant seem to use. I just don't understand why, this is a brand new card with its own software. But to add lastly to this, I formatted hard dri've, installed Windows XP home, then immediately afterwards i installed the drivers and software for the sound card and it worked like nothing was wrong at all, software and all. But once i installed my video drivers and software, either the sound card software didn't work or the operating system would lock up right after the splash load screen. Please, can someone let me know anything that i can do to fix this problem! It's been very bothersome and annoying as all! Thank You.

Alright, I once again formatted the hard dri've. This is what i've done:
Windows XP Home w/SP
All Motherboard Drivers
Disabled On-Board Sound
Installed Audigy 2 ZS Drivers and Software
Removed Wireless Card and Video Capture card
And all Windows OS updates
Direct X 9.0c
But what i haven't done yet is installed the drivers and software for the video card. I have a ATI 9800 XT 256mb AGP card, getting updated drivers for the card is not a problem. But I also didn't install service pack 2 yet either. im trying to figure what is really causing the problem now. But as of now, the sound card and software is working properly. thats pretty much where i stand now, so if there is anyone out there that might now what i can do from here, or what should i NOT do, please let me know!
Thanks again

Will the Sound Blaster Audigy 2 drive bay work with Audigy 2 ZS car

As above,
can the Audigy 2 dri've bay be used with the Audugy 2 ZS and if so, can everything on it be used?.
Are all the connections and functions the same on both dri've bays(Audigy 2, Audigy 2 ZS)?

Yes, they should work with eachother, but it is not officially supported.
Cat

Recording with Sound Blaster Audigy 2 Value! ag

Alright, I've been trying to record from various instruments and devices... (synth with /4 inch stereo output to /8 inch convertor, cd player with /8 inch output, guitar to amp to /4 inch stereo output to /8 inch convertor)Basically, I want to record in stereo sound.) Does line-in on the SB Audigy 2 Value card have stereo input? Whenever I've tried to record, I have only been getting the left channel. 2) Where's the game controller / midi input? Do I have to purchase the optical digital i/o 2 add on? And if I do, will this even work with the Audigy 2 value? 3) Does the SPDIF work as a stereo input for any of the devices I've been trying to record from at all? or does it require the I/O device I just mentioned?Thanks in advance,Tyler Pantella

picklehammer wrote:
Alright, I've been trying to record from various instruments and devices... (synth with /4 inch stereo output to /8 inch convertor, cd player with /8 inch output, guitar to amp to /4 inch stereo output to /8 inch convertor)Basically, I want to record in stereo sound.) Does line-in on the SB Audigy 2 Value card have stereo input? Whenever I've tried to record, I have only been getting the left channel. 2) Where's the game controller / midi input? Do I have to purchase the optical digital i/o 2 add on? And if I do, will this even work with the Audigy 2 value? 3) Does the SPDIF work as a stereo input for any of the devices I've been trying to record from at all? or does it require the I/O device I just mentioned?Thanks in advance,Tyler Pantella
You just can't record analog mono instruments as stereo without a stereo microphone.
If you mean to record a signal which 'stays in the middle' and not 'panned left or right' then you need
- mono to L+R (stereo) convertor adapter
or
- mono to R+L (stereo) cable
between (pre)amplifier output and soundcard input.
<i>Note: Normally instruments are recorded mono --> easier to set instrument positions in final stereo mix</i>.
) yes it is stereo
2) no game/midi on Value. Purchasing Digital I/O won't make any difference to this.
3) dunno, see yoyr user manual
.jtp

2 diferents outputs with sound blaster platinum ex?

I want to mix with the computer. Can I listen one track on the monitors and other track on my headphones? have the sound blaster audigy platinum ex the multitrack option?
I have Traktor DJ Studio, but i don?t know if the problem is about the target or about the program..
THANKS

GRe: ASIO problems with Sound blaster Audigy Platinum ex and Finale 2009`
Barfdoggy wrote:
Cannot open Finale 2009 at all nor can I get rid of notice that I have ASIO problems with Creative.
Could use some help. I am senior citizen and this is not helping my senility. Thanks!!
Are there error messages coming out?
Which operating system are you using?
NOTE: Samplerate and bit-depth for ASIO in Audigy series cards is fixed to 6-bit/48kHz (and 24-bit/96kHz). If your 'project' is set for 44.kHz, it's possible that you can't get it started.
If you can't get the software started because of ASIO error then, you could try
- temporarily rename ctasio.dll (this file can be found under Windows\System32\) so the software/system can't find it anymore
- install asio4all driver which supports all samplerates your card is able to ( http://www.asio4all.com )
jutapa
@82.8.5.25

Setup could nod detect any Sound Blaster Audigy 2 on your sys

I want update my Sound Blaster Audigy 2 driver. I click on Software AutoUpdate, system show me version my driver - DR release .84., than offered update to - Creative Sound Blaster Audigy2 and Audigy2 ZS Driver Update .84.55, then download file SBA2_PCWDRV_LB__84_55-R.exe. I run file and see the message ".
please ensure that your Sound Blaster hardware is properly installed before running this Setup program.
Setup will now exit". How can i fix it's

You might find some help here:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=44974

I have some Audigy card Sound Blaster Audigy SB1394 EAX ADVANCED HD maybe can

I have some Audigy card Sound Blaster Audigy SB394 EAX ADVANCED HD maybe can i get some info about this card.. it is 5./6. some details about it. i found it in my closed :P
it will be great if someone help me about this card. because i have my SB li've Value if this audigy better i'l just change it.

i think it is an Creative Labs SoundBlaster Audigy with 394 PCI Sound Card
32-Bit Professional Quality Effects Engine
? Creative's Audigy? patented effects processor
? Support for real-time digital effects like reverb, chorus, normalizer, pitch shifter, or distortion across any audio source
? Capable of processing, mixing and positioning audio streams using up to 3 available hardware channels
? Full 32-bit digital mixer maintains all sound mixing in the digital domain, eliminating noise from the signal
High Definition Audio Quality
? Playback of 64 audio channels, each with its own independent sample rate
? 24-bit Analog-to-Digital and Digital-to-Analog conversion
? 6-bit recording with sampling rates of 8, .025, 6, 22.05, 24, 32, 44. and 48kHz
? Supports Sony/Philips Digital Interface (SPDIF) input and output of up to 24-bit/96kHz quality
? SPDIF output up to 24-bit resolution at selectable sampling rate of 44., 48 or 96kHz
? Low latency multi-track recording with ASIO? support
EAX?ADVANCED HD?, Advanced Audio and 3D Audio Technology
? Optimized user-selectable settings for headphones, two, four or six speakers and external A/V amplifiers
? Dolby? Digital audio decoding to 5. speaker channels in both analog and digital modes
? Upgradeable 3D audio architecture for future improvements
? Hardware acceleration of EAX ADVANCED HD for games
? Creative Multi Speaker Surround? (CMSS) technology places any mono or stereo source in a 360? audio space
? User-selectable EAX ADVANCED HD music presets, pre-configurable DSP modes simulating various acoustic environments
? Time-scaling
? Audio Clean-Up
SB394 Connectivity
? High speed connection to IEEE? 394-enabled devices with up to 400Mbps transfer rate
? Interconnection of up to 63 devices for peer-to-peer communication
? SB394 Certification Program thoroughly tests and certifies participating vendors' 394-enabled devices with Sound Blaster Audigy for optimal performance and ease of use
? Hot-plug support for ease of connecting or disconnecting external devices
Realistic Wave-Table Synthesis
? Creative's Audigy music synthesis engine
? 64-voice hardware polyphony with Creative's patented 8-point interpolation technology that reduces distortion to inaudible levels
? Uses SoundFont? technology for user-definable wave-table sample sets
? Unlimited sample size can be loaded into host memory for professional music reproduction (limited to available system memory size)
? Scalable PCI wave-table synthesis architecture with multi-timbre capability
? 48 MIDI channels with 28 GM & GS compatible instruments and 0 drum kits
MIDI Interface/Joystick Port
? Support for analog and digital or DirectInput? game devices
? Support for two simultaneous MIDI devices with Sound Blaster Audigy Dri've
On-Board Connectors
? Analog / Digital Out (Analog Center & Subwoofer / 6-channel SPDIF Output)
? Line in
? Microphone in
? Line level out (Front) / Headphone out
? Line level out (Rear)
? SB394 port
? Telephone Answering Device in
? Analog CD Audio in
? Digital CD Audio in
? Expansion header to an external 5-pin Joystick / MIDI port
? Internal SB394 header to Sound Blaster Audigy Dri've
? Expansion header to the Sound Blaster Audigy Dri've
Sound Blaster Audigy Audio Performance
? Signal-to-Noise Ratio (A-Weighted) = 00dB
? Crosstalk (Left/Right and vice versa) = -00dB
? Total Harmonic Distortion + Noise at kHz (A-Weighted) = 0.004 %
? Frequency Response at -3 dBr = <0 Hz to 22 kHz

Creative Sound Blaster Audigy ZS And Vista Driver installation prob

HI!
I encounter Installation problems with that file:
Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
Thanks!
Julien

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

Help with an Older Sound Blaster Audigy Card! Computer freezing on driver upda

Hey everyone,
I'm new to these forums and dont know if anyone still has experience with the older cards.
I've had a Sound Blaster Audigy 2 Platinum for about 6 years now and noticed some popping and sometimes the card began to emit a high pitched whining sound. Thus I decided to install the newest drivers (can't hurt can it's)
However, when I finished installing the drivers, my system refuses to start. Sometimes it's at the Windows login screen, sometimes right after.
I finally got something that may be the reason why my system is hanging. I have a message that pops up that says:
Box Name: ReadReg Application :Version 6.0..36
Message: Completing installation of your audio card
??? Please wait.
My computer is now frozen.
Here are my system specs if it helps
P4 2.66Ghz
ASUS P4S800D-X
PNY 6800GT
SB Audigy 2 Platinum
GB Corsair XMS3200C2PT (2x52MB)
Windows XP Pro
DVD+/-RW DL
DVD ROM
After I did a system restore, the sound driver was missing. Said Creative Audigy in the driver section with the yellow exclamation mark. I installed the new drivers again with the same problem.
Any help is welcome!? Thank you for your time and consideration.
Message Edited by Bane99 on 2-02-2008 07:00 PMMessage Edited by Bane99 on 2-02-2008 07:0 PM

I would:
Pull the sound card.
Start up.Enter the BIOS setup utility to make sure your MB recognizes the change.
Save the BIOS
Start again.
If Windows works.
Run a thorough virus scan (I hope you're running some reputable anti-virus software!!!)
Install Service Pack 3.
Re-install the sound card..
I'll bet Windows finds a driver for it that works. If not, run Windows update manual and see if there's a driver update for the card.
If none of the above helps, well... I confess, I reinstall Windows at the drop of a hat and that usually solves all problems. Do it on a Sunday so you can watch football while Windows churns.
Power Quest Dri've image has saved me from the Windows install horror on many occasions. I think Symantec has pulled the program but there must be something similar out there. Buy it. And in the future, remember, if it ain't broke, don't fix it!
Good luck.

Sound Blaster Audigy 2 ZS - Driver is

Hello,
Recently my creative speaker settings and all my THX controls stopped working. I removed all my drivers, then reinstalled the following from the creative website.
. Creative Sound Blaster Audigy, Audigy 2 series and Audigy 4 series Driver 02.08.0004
This reinstalled the creative media center as well as the creative audio console, but it did not install the Sound Blaster Audigy 2 ZS folder or application etc, which is what has all the Creative Speaker Settings and THX control and all the other creative options. I tried using the driver installation disc which came with the soundcard, but although it shows the creative settings/ THX control installed, whenever i try to open those applications, I get an error message saying that it cannot open that audio device, install audio drivers. I searched for the right drivers and even did the automatic updater, yet it did not work.
So basically could anyone help me find the right driver to download so my creative speaker settings, THX console and all those other apllications will work?
Thanks for your time.

Even using just the CD drivers, shouldn't the applications still work?
right now when I try to open creative speaker settings I get the error:
The Audio device selected by this application is not detected. The application will exit.
Does that mean anything?

Sound Blaster Audigy 2: Can't install updated drive

Creative Media source was getting a error and disallowed me to access the EAX console.
So i did a clean sweep and uninstalled Audigy 2 and its components (Media Source etc).
With that i lost my updated drivers. I resently downloaded a updated driver from this site
Audigy2/2 zs Web update WDM. But... when i try to run the setup for the update i get this errror:
Setup did not detect a driver version supported by this web update: The installation will now close.
also another file from a different source:
Setup could not find any previous version of Sound Blaster Audigy 2 Web Update WDM Drivers
Installed.
My sound card is obiviously a Audigy 2. It displays this information:
Creative Audigy Audio Processor WDM (CF00)
Driver Version 5.2..328 (Version from the Installion CD)
Please help me get new Drivers!!!

letoon wrote:
i have the same problem and the driver package that reports this stupid?error is SBA2_PCWDRV_LB__84_55-R.exe?so first the web autoupdate detects the card and recommends a critical driver update to dl which then reports that it can't find the card (sb audigy 2) ?how to update then?
You can't install this if you have not install the EAX4 driver first. Read the detail information in those download page first.

Error with Sound Blaster Audigy 2 installation...driv

Similar Messages

Maybe you are looking for