Error with speed retiming render
Having some probs and would be very grateful if someone could point out where my workflows going wrong.
Im working with hdv 1080i50 footage in final cut pro. I ctrl-click on the footage in my timeline, select send to Motion project and motion opens displaying the clip. I then click add behaviour and time remapping. I then change the clip speed from 100 to 50 using the side bar, turning all the other sliders down to 0 as im just going for a straight 50% reduction in the clip speed. I then bring the final cut window back up but the footage still runs at its original speed in the timeline in fcp. I bring the clip up in the fcp viewer, click the motion tab at the top of the window and redo the changes I made to clip speed in Motion. I render and the clip plays back smoothly at 50% speed in the timeline. I save the Motion project, but as soon as I close Motion the sequence in final cut goes red again. When I render it comes out at 25% of original speed and only includes 50% of the original footage.
I've been trying to figure this out for a while now and cant see the wood for the trees. Any help really gratefully received.
sorry. was stupid and could have just used the motion tab in fcp. apologies if i wasted anyones time
Similar Messages
-
Playback and Render Errors - communication error with child process failed
Tried a reinstall, does not fix the issue, will get the gray screen with text: communication error with child process failed
This happens during playback (About 30% of the frames or so) as well as when rendering an output.
On PC.So I updated my nvidea drivers to the latest and greatest (GeForce 327.23). I also reinstalled SpeedGrade CC (which is quite the pain, btw! why can't we keep a local .exe file? Have to download every time you want to resintall ... even if only ten minutes apart!)
Still the issue seems to persist.
The footage is from the BlackMagic Pocket Cinema Camera. It worked fine about a month ago when I was working on some footage from the same line of cameras.
Intel Core i7-3610QM CPU @ 2.30GHz
16GB RAM
Win7 Ultimate
Geforce GTX 670M
GPU Engine Specs:
336 coresCUDA Cores
598 MHzGraphics Clock (MHz)
33.5Texture Fill Rate (billion/sec)
Memory Specs:
1500Memory Clock
GDDR5Memory Interface
192bitMemory Interface Width
72.0Memory Bandwidth (GB/sec)
Anyone have any suggestions? -
After Effect errors with GeForce GTX 860M !!
Hello everybody,
I have tried the trial version of After Effect on my brand new laptop MSI GE70-2PE048FR with Nvidia GeForce GTX 860M CUDA v6 - Mobile QuadCore Intel Core i7-4700HQ, 3300 MHz (33 x 100) and Im getting errors while trying to render a test composition using the GPU... First the GPU was not recognized so I modified a file in After Effect diretory and then it get recognized. Even before that, I tried to force the use of the GPU (with checking the special checkbox to force it in the GPU INFO PANEL of After Effect CC) and it was getting the sames errors anyways !
I have been using and testing MSI factory NVidia drivers v332.35 that are not even available on NVidia web site and I have been teting with NVidia BETA drivers v337.50. Got same results.
My configuration :
Thanks for any advice.
I would like to know if after effect is planning to support this GPU ? When ? Or anyone have any clue resoving these errors ?
Champ
Valeur
Ordinateur
Type de système
PC ACPI avec processeur x64 (Mobile)
Système d'exploitation
Microsoft Windows 8.1
Service Pack du système
[ TRIAL VERSION ]
Internet Explorer
11.0.9600.16659
DirectX
DirectX 11.2
Nom du système
MSI-APACHE-PRO
Nom de l'utilisateur
Fabien
Domaine de connexion
[ TRIAL VERSION ]
Date / Heure
2014-04-11 / 19:30
Carte mère
Type de processeur
Mobile QuadCore Intel Core i7-4700HQ, 3300 MHz (33 x 100)
Nom de la carte mère
MSI MS-1759
Chipset de la carte mère
Intel Lynx Point HM87, Intel Haswell
Mémoire système
[ TRIAL VERSION ]
DIMM3: Kingston MSI16D3LS1KBG/8G
[ TRIAL VERSION ]
Type de Bios
AMI (02/21/2014)
Moniteur
Carte vidéo
Intel(R) HD Graphics 4600 (2080 Mo)
Carte vidéo
Intel(R) HD Graphics 4600 (2080 Mo)
Carte vidéo
Intel(R) HD Graphics 4600 (2080 Mo)
Accélérateur 3D
Intel HD Graphics 4600
Accélérateur 3D
nVIDIA GeForce GTX 860M
Moniteur
Chi Mei N173HGE-L11 [17.3" LCD]
Multimédia
Carte audio
Realtek ALC892 @ Intel Lynx Point PCH - High Definition Audio Controller [C-2]
Stockage
Contrôleur IDE
Intel(R) 8 Series Chipset Family SATA AHCI Controller
Contrôleur IDE
Realtek PCIE CardReader
Contrôleur de stockage
Contrôleur des espaces de stockage Microsoft
Disque dur
HGST HTS721010A9E630 (1000 Go, 7200 RPM, SATA-III)
Disque dur
SanDisk SD6SF1M128G (119 Go)
Lecteur optique
HL-DT-ST DVDRAM GTA0N
État des disques durs SMART
OK
Partitions
C: (NTFS)
SSD 128Go
D: (NTFS)
914.0 Go (803.7 Go libre)
Z: (NTFS)
989 Mo (601 Mo libre)
Taille totale
[ TRIAL VERSION ]
Entrée
Clavier
Périphérique clavier PIH
Clavier
SteelSeries PS2 Device
Souris
ELAN PS/2 Port Smart-Pad
Souris
Logitech HID-compliant Cordless Mouse
Souris
Souris HID
Réseau
Adresse IP principale
[ TRIAL VERSION ]
Adresse MAC principale
Carte réseau
Bluetooth Device (Personal Area Network)
Carte réseau
Intel(R) Dual Band Wireless-AC 3160 (192. [ TRIAL VERSION ])
Carte réseau
Killer e2200 Gigabit Ethernet Controller (NDIS 6.30)
Carte réseau
Microsoft Wi-Fi Direct Virtual Adapter
Périphériques
Imprimante
Brother HL-2250DN series Printer
Imprimante
Brother HL-2250DN series
Imprimante
Fax
Imprimante
Microsoft XPS Document Writer
Contrôleur USB2
Intel Lynx Point PCH - USB 2.0 EHCI Host Controller 1 [C-2]
Contrôleur USB2
Intel Lynx Point PCH - USB 2.0 EHCI Host Controller 2 [C-2]
Contrôleur USB3
Intel Lynx Point PCH - USB 3.0 xHCI Host Controller [C-2]
Périphérique USB
Carte Intel(R) Wireless Bluetooth(R) 4.0 + HS
Périphérique USB
Generic USB Hub
Périphérique USB
Generic USB Hub
Périphérique USB
HD-6000 - Microsoft LifeCam.
Périphérique USB
Microsoft LifeCam HD-6000
Périphérique USB
Périphérique d’entrée USB
Périphérique USB
Périphérique d’entrée USB
Périphérique USB
Périphérique d’entrée USB
Périphérique USB
Périphérique d’entrée USB
Périphérique USB
Périphérique d’entrée USB
Périphérique USB
Périphérique d’entrée USB
Périphérique USB
Périphérique USB composite
Périphérique USB
Périphérique USB composite
Périphérique USB
Périphérique USB composite
Batterie
Adaptateur secteur Microsoft
Batterie
Batterie à méthode de contrôle compatible ACPI Microsoft
DMI
Distributeur du Bios
American Megatrends Inc.
Version du Bios
E1759IMS.512
Fabricant du système
Micro-Star International Co., Ltd.
Nom du système
GE70 2PE
Version du système
REV:1.0
N° de série du système
[ TRIAL VERSION ]
UUID du système
[ TRIAL VERSION ]
Fabricant de la carte mère
Micro-Star International Co., Ltd.
Nom de la carte mère
MS-1759
Version de la carte mère
REV:0.B
N° de série de la carte mère
[ TRIAL VERSION ]
Fabricant du châssis
Micro-Star International Co., Ltd.
Version du châssis
N/A
N° de série du châssis
[ TRIAL VERSION ]
Identifiant du châssis
[ TRIAL VERSION ]
Type du châssis
NotebookGuys, I have exectly the same problem. Please Mr Adoby let us know what is the solution to this problem!!!!
-
Error with rendering of CSS code
I may of found an unknown error with ADE. I did a gogole search and didn't see the same error.
I was having issues with ADE rendering my backround image in a table. It show up find in sigil but not ADE. And my other EPub I create did show up correctly I try everything I new (I'm just learnng CSS).
I had a thought, what if my file name was to long. But I dismiss that idea. As a last temp effort, I try renaming it to a shorting name and it work. However, it was not the lenth of file name, but that I had parentheses " () " in my file name. As soon as I took them out it render correctly. My backround image show up as it should.
Not sure if this is known, but I couldn't find the issue with a google search or searching these forums. I know that some programes rename dupicate files with parentheses.hi
go to CUNI
select ISO codes give new entry for CAR
then save and come back in CUNI select the UOM then double click onur unit at right u will get field of ISO code give iso code here and save
regards
kunal -
Error with font as shown in the image below.
http://i1085.photobucket.com/albums/j432/Lazmarr/Firefoxfontweird2.pngHello,
Firefox on Windows is now following display scaling options which may render text larger on high resolution displays.
You can adjust your screen resolution.
To modify it do the following:
* Type '''about:config''' into the Firefox address bar and tap on the Enter key.
* If the warning '''This might void your warranty''' appears, click '''I'll be careful, I promise'''.
* Search for '''layout.css.devPixelsPerPx'''
[[Image:Fx22layout.css.devPixelsPerPx]]
* Double-click on layout.css.devPixelsPerPx to modify its value. The default is -1.0 in Firefox 22 and above. Change it to '''1.0''' to make it work like in previous Firefox versions.
If necessary, further adjust the value in 0.1 or 0.05 steps. Use values between 1.0 and about 0.5 to reduce elements in size. Use values greater than 1.0 to increase size. For example, a value of 1.25 will increase font size to 125% to accommodate the default DPI setting in Windows 8. '''Double check the value that you enter.''' Setting a too small value will make everything disappear and a too large value will blow things up.
If web pages still need to be adjusted then you can look at the [https://addons.mozilla.org/firefox/addon/default-fullzoom-level/ Default FullZoom Level] or [https://addons.mozilla.org/firefox/addon/nosquint/ NoSquint] extension.
To adjust the font size for the user interface, you can use the [https://addons.mozilla.org/firefox/addon/theme-font-size-changer/ Theme Font & Size Changer] extension.
Did this fix your problems? Please report back to us!
Thank you. -
I can’t believe the amount of concern / disappointment / frustration spread across every associated Fireworks forum re: CS5’s
"An internal error occurred"
"Could not render the database"
"Not enough memory"
"Crash without notification"
Etc.,
We installed the CS5 trial – being more than wary about Adobe’s past releases – and lo and behold, all of the above beared ‘true’!
This is nothing new of course, we’ve all been experiencing this since CS3 – but hoping against hope - a newer release would solve the poor memory management and general ‘bug-ridden’ code; alas - as per usual, Adobe has not responded with any pro-solution based action, but successfully furthered our frustration with a couple of fresh gimmicks without strengthening the core software.
As an avid fan of adobe software […and a Fireworks freak] working in a design house that has many different employees with widespread software tastes – I eventually said ‘enough is enough’ after the umpteenth crash [as of 3 weeks ago] and have revisited the Rebel Alliance; ‘yes, CorelDraw’! No I’m not going to go into some tirade about how much better Corel is etc. - as it has its own strengths and weaknesses, too […but without the hourly crashes] – so to be honest, we figure the time increase in some projects due to using Corel […time is diminishing with each project’s acquired experience] are negated by the downtime of Fireworks; so far, this is holding true.
This may seem drastic, but it has been a long time coming – that is, implementing a move from our decade invested workflow to a ‘somewhat’ new schema, but due to the disappointing aforementioned, eventually principal / expenditure comparisons / sanity / lack of support all culminate to such, and if there’s no support for the competition, well – then there is ‘no’ competition; a luxury Adobe has taken for granted way too long.
I truly hope Adobe turns around and fixes their ways, until then – we’ll be supporting those that do – and hopefully along the way, just maybe, with the added funds from disgruntled adobe x-pats – the software will far exceed what I used to love and adore […how I miss macromedia]; honestly, it would be near on impossible to argue which suite was better ‘either way’ – so it may not be such a distant future. Besides, with the market-door Adobe is opening due to such poor software, the new player sniffing around the edges will be welcomed by many with open arms; I know my/our allegiance will go straight to the company with the greatest software stability and sound support, whomever that maybe.
So here’s to hoping no more, and actually doing! Very sad...I am also getting this error message. It happens randomly. Adobe help told me to close and reopen FW and then it stopped happening. Does this sound like a good solution to anyone?
-
Error After effects quicktime Render
Hello
I am facing a problem rendering in After Effects CS5.
This is my computer :
- Windows 7 Pro 64bit
- Processor: Intel Xeon E5 2660 V2 - 20CPU
- 32GB Ram
- CG: Nvidia GTX 780 TI
My problem:
I'm working on a movie with a green screen sequences in .mov, animation codec. When I start rendering, it runs for a few pictures and then the error:
Error made in the background. Rendering in the foreground will be activated after 229 images out of 486 (26 § 142)
After Effects (Error) Error (4) when reading image from file D: \ ****** \ Sequences \ TV_Sequence-3a6.mov. (86 § 2)
After Effects (error): Keylight out of memory. (4) (25 § 241)
I tried a lot of manipulation:
- Checking "using the OpenGL" and it works but the rendering time is multiplied by 10 if not more.
- By changing the format of the green screen sequences (wmv, mp4, avi) and it works. So it's really a .mov problematic.
- By activating or not, the hyperthreading and it crashes.
- By testing a render without movie inside the comp and it works
So I think it comes from Quicktime and the number of processor cores, but how to solve this problem? : s
I already check this link : troubleshooting QuickTime errors with After Effects CS5, CS5.5, CS6, and CC | After Effects region of interest but it doesn't works
Thank you for your help
(sorry for my english)The QuickTime version is 7.7.5.
With my old machine, it worked perfectly.
I can make a render in .mov (animation, h.264, etc ) with no .mov in my comp but if there is, after effects gives me an error ...
Thanks for your reply -
HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.thank's for reply and your help
i did the step's that you told me but i still have the same problem
i have the latest v.11.0.7
i
i disable the protected mode -
Odd Error with decode function in Order By Clause
I am trying to compile a procedure and can't get around an error with a dynamic order by that doesn't make much sense to me. I can repoduce the error with a plain select statment in sql plus so I can rule out a declaration error. Here is an example with 2 numeric columns and a date column.
select task_id, display_date, remark_id from task_list
where task_id > 1000
order by decode('Task_ID', 'Task_ID',Task_ID, 'Display_Date', Display_Date, 'Remark_ID',Remark_ID)
returns the error:
select task_id, display_date, remark_id from task_list
ERROR at line 1:
ORA-00932: inconsistent datatypes: expected NUMBER got DATE
I'm not sure why this error is occuring, because it doesn't even hit the Display_Date field in the Decode statment. If I take the Display_date out of the statement, it runs properly. If I change Display_Date to To_Char(Display_Date) it also runs fine, but the sorting is incorrect. Also I'm running 9.2, and do not want to use dynamic sql to build my query. Any Ideas out there as to the cause of this error?I did find a workaround to this issue by breaking the decode statment into three separate statement, but I still think that the way it is written above should work, and may be a bug, or an error that I don't understand fully.
The Order by was rewritten like this:
order by decode(pSort, 'Task_ID',Task_ID), decode(pSort, 'Display_Date', Display_Date),
decode(pSort, 'Remark_ID',Remark_ID);
Thanks -
XML Publisher Error with reports published in XML publisher
Hi All,
I am geting the following error with a report published using XML Publisher
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
The system cannot locate the resource specified. Error processing resource 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.d...
How can i Rectify this?Hi Ark,
In order to generate a report using xml publisher. we need the following.
1. XML Data
2. Template file (RTF/PDF/..)
XML data will not be created by the template file.
We will be required to create XML data. One of the easiest way to create xml output is using the RDF. We can change the rdf output type in the concurrent program to XML.
Once the xml and the template is available, "XML Report Publisher" will be able to generate the output in the required format.
Thanks,
K.Nataraja Suthan, -
Graphic problems/errors with Mainstage 3 and MBP (15'' 2011)
Hi,
I bought Mainstage 3 for my MBP (15'' 2011).
When i click con "perform" i get graphic errors.
I have the same issue with the old Mainstage version since Mountain Lion.
Also a fresh installation didn't help.
I think i'm not the only one with this issue!
I don't know how to report a bug?
Perhaps someone can help me.
(and I'm probably not the only one (see feedback in Apple Store) If you also have this problem, please add a comment with your configuration (Hardware, Software))
/forgotten ebi
So, here an example how it looks like when i click on "perform":Same configuration,same problem. BUT I found a workaround.
Mainstage has this error with the AMD video card and/or a second monitor connected.
With a little app (http://gfx.io) it's possible to really force the MBPro to use the Intel Graphics card.
This will work only with the internal screen, not with a second screen connected.
And sometimes you need to restart, to really make the Intel video card free.
This works fine...In the meantime of a fix. -
HI BI gurus,
we have a problem with an infoset.
We create an infoset in RSA1 linked to a cube and a DSO.
We activate it in english without problems and I can create a query with no errors (with a english logon).
If I try to create a query in italian language the query designer show mw this error: " unexpected error - RCF_SYSTEM_FAILURE. You must restart the query designer."
Do you have any idea how to fix and solve this problem? We try to activete the infoset in Italian but the error remains.
Thanks for any help.
SBHi,
is italien installed as a language in your system?
Siggi -
I took a lot of pictures and video on my recent trip to Ireland. Now I am trying to download the photos and videos from my iphone to my mac - iphoto. I have tried 3 times and each time (at a different point) I get a message telling me that there was an error with one of my photos and it wont load the pictures. Help!!
Try using Image Capture to download to a folder on the Desktop. If there's a damaged file on the iPhone that's preventing the download you can isolate it with Image Capture and then delete it from the iPhone.
-
Plug-in errors and dependency errors with a CAF app in DS in NW CE 7.1
I am learining to build CAF apps in Developer Studio in NW CE 7.1. Here are my steps and the errors I am getting:
Open Developer Studio
Switch to the CA perspective
File->New->Project
Choose Development Component under Development Infrastructure
Press Next
Choose Composite Application under sap.com
Choose MyComponents[demo.sap.com] under 'Local Development'
Vendor: demo.sap.com
Name: carpool
Caption: Car Pool
Language: American English
Domain: SAP-xApps
Support Component: CAF-APP (typed in, not chosen)
Press Finish
The following error appears:
Status ERROR
Plugin : com.sap.ide.metamodel.core.services.eclipse
code=0
Internal error
Plugin name: Metamodel Core
Internal error : com.sap.ide.metamodel.core.services.eclipse
Class : com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker
Method : computeIdeJarProperties
Message : C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
Exception : java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:203)
at java.util.jar.JarFile.<init>(JarFile.java:132)
at java.util.jar.JarFile.<init>(JarFile.java:70)
at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.computeIdeJarProperties(ArchiveVersionChecker.java:296)
at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.doFullCheck(ArchiveVersionChecker.java:214)
at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.checkProject(ArchiveVersionChecker.java:125)
at com.sap.ide.mmservices.core.eclipse.generation.GenerationServiceEclipse.checkArchiveVersions(GenerationServiceEclipse.java:110)
at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.checkArchiveVersions(GenerationBuilder.java:335)
at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.build(GenerationBuilder.java:85)
at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:624)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:166)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:197)
at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:246)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:249)
at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:302)
at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:334)
at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.java:137)
at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:235)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
I do not think I missed anything installing NW CE 7.1, but this error makes me think that some plug-in was erroneously left out of the install.
Incidentally, I can continue onward and build an app (this is obviously a tutorial), but when I try to deploy I get the following error:
The deployment of the archive failed with an exception!
([ERROR CODE DPL.DCAPI.1027]) DependenciesResolvingException.
Reason:[ERROR CODE DPL.DC.3033] An unresolved dependencies error
occurred while sorting the deployment batch items regarding the
dependencies.;nested exception is:
com.sap.engine.services.dc.cm.deploy.sdu_deps_resolver.UnresolvedDepen
denciesException:[ERROR CODE DPL.DC.3437]Unresolved dependencies
found for the following deployment items:
1. Component: name:'carpool~ear',vendor:'my.company',location:
'localDevelopment',version:'20080501110329',software type: 'J2EE',
dependencies:'[name:'cafruntimeear',vendor:'sap.com',name:
'cafcoreear',vendor:'sap.com']
Unresolved dependency:
name:'cafruntimeear',vendor:'sap.com' (not found in the admitted
batch items and the repository)
Unresolved dependency:
name:'cafcoreear',vendor:'sap.com' (not found in the admitted
batch items and the repository)
Please check the error log for further informations.
Again, this looks like I am missing some components.
Any assistance is greatly appreciated.
TBFurther developments: As you may note from the error message, DS is looking for com.sap.ide.metamodel.core.services.eclipse in both the C: and the E: drive at the same time. In fact, this file exists in the E: drive subdirectory listed, so I obviously have an error with two drive designations being concatenated. Does anyone know how I can change the lookup directory for this dependency (or any dependency)?
Thanks,
TB -
PeopleSoft XML Publisher report error with java.io.FileNotFoundException
Hi,
I have created two reports using XML Publisher in Peoplesoft Financials. The two reports are not related and they were submitted for processing separately. The first report completes without any issues. The second report results in error with the following message:
09.11.17 ..(CIS_POTRPT.XML_FILE.Step03) (PeopleCode)
[012309_091118154][oracle.apps.xdo.template.FOProcessor][EXCEPTION] IOException is occurred in FOProcessor.setData(String) with 'files/cis_potrpt.xml'.
[012309_091118500][oracle.apps.xdo.template.FOProcessor][EXCEPTION] java.io.FileNotFoundException: files/cis_potrpt.xml (A file or directory in the path name does not exist.)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java(Compiled Code))
at java.io.FileInputStream.<init>(FileInputStream.java:89)
at oracle.apps.xdo.template.FOProcessor.getInputStream(FOProcessor.java:1316)
at oracle.apps.xdo.template.FOProcessor.getXMLInput(FOProcessor.java:1100)
at oracle.apps.xdo.template.FOProcessor.setData(FOProcessor.java:372)
at com.peoplesoft.pt.xmlpublisher.PTFOProcessor.generateOutput(PTFOProcessor.java:53)
2009-01-23-09.11.18.000418 AePcdExecutePeopleCode [174] Exception logged: RC=100.
Error generating report output: (235,2309) PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:ProcessReport PCPC:51552 Statement:1153
Called from:CIS_POTRPT.XML_FILE.GBL.default.1900-01-01.Step03.OnExecute Statement:8
2009-01-23-09.11.18.000617 DoStepActions [1797] Exception logged: RC=100.
Process 598607 ABENDED at Step CIS_POTRPT.XML_FILE.Step03 (PeopleCode) -- RC = 24 (108,524)
In the process monitor detail > view log/trace page, the xml file is accessible so the file was generated to a valid directory.
The weird thing is I was able to run this report without any issues few weeks ago although another user also ran into same error. The PeopleCode step that has been identified is essentially same in the two reports. I checked the app server and the directory does exist as well as the xml files for the two reports. The problem does not occur in test environment, just in production. Any help would be appreciated.We encounter the same problem. Did you get the answer for this issue? Thanks in advance.
Maybe you are looking for
-
IPad will no longer sync after iOS 5 update
I updated my Original iPad to iOS 5 and now it no longer syncs; it stays stuck at the preparing to backup step. This happens whether I try it via WiFi or via the standard way with the cable. I'm thinking I should do a Restore from Backup and get it b
-
Hi Can anyone explain how does the GR processing time affect the scheduling of the process order & the latest start date in the operation overview.
-
The print window settings dialog box will not come up
When attempting to print a website, I need to select the option to print as laid out on the screen as described in this how-to: https://support.mozilla.org/en-US/kb/how-print-websites#w_print-window-settings. However, I have attempted to get this dia
-
Just wondering I just made a dvd from tape on my camcorder which is min dv. The picture quality of the dvd is not as good as when you play the tape onto the TV using the camera. In other word the dvd picture quality is not as good as the mini dv is t
-
HT1438 How can I verfiy my apple account if I dont know how to check it?
I'm trying to back-up my iphone 4 infomation by using Cloud. I now have the 5 and i cant back-up either of them. Everytime I try it says i must check my apple email for verfication. I dont know how to.