Error with target resource of the FPGA in project tree

Good evening
I am completing the tutorial about NIeval quit of CompactRIO.
I am using a RIO 9631 and after compiling the 1st example(simple counter example)
I get this error:
"you cannot run this VI because the because the target resource does not match the actual type of device"
I go to project and I see than FPGA resouerce is RIO0, the same that is by default in the project, the same is in the tutorial guide and the same appears in MAX.
I have to say I had installed the Labview before testing the card so I only have copied the folder of the tutorials in my desktop and I have opened from there.
Can u help to solve this error??

Hi,
Ok here is some update on the issue:
After again querying the WF table
we found that this is the WF which ran
"PA Mass Assignment Transaction Workflow" (PARMATRX) 5109937 -10001.
Also the notification went to a person who is not at all related to this project in any way. Want to find out how to over the come with the problem of blue dots and need to find how the submitter attribute value in the WF is getting populated.
Please let me know your views/hints.
Thanks
Anand.

Similar Messages

Error when retrieve resource by the property contentlink

We are facing problems to retreive an resource by the property "contentlink", for example:
We have an resource in the wpccontent repository, and your property "contentlink" has this value /irj/servlet/prt/portal/prtroot/docs/guid/3062f0a0-a97e-2c10-19ac-bcc642332ee1. When try to retrieve the resource, we received an Rerource404Exception error.
But when we replace the value in the address bar of web browser from /guid... by the value of property "shortID", that contains the value /guid/a05daa5e-a18a-2c10-14bf-cd2506ea3c94, the resource is displayed normaly.
The property "contentlink" can be with wrong values? Can anybody tell me why this happen?
Note: This error happen with any kind of resource, but not with all resources. The error occurs with some resources only. And the folder does not have versioning enabled.
Thanks & regards,
Raphael

Hi Shushmakad,
If you set Preserve Sequence Property=true. BizTalk will always expect source node will be in sequence, but you have option to change sequence of destination schema by updating xslt.
Can you test your map with sample input message with sequence.
Debug xslt (use this url for reference)
http://msdn.microsoft.com/en-us/library/ms255602(v=vs.110).aspx
Regards
Suman

Error with adautocfg.sh on the DB during final stage of upgrade

Hi ;
I have same issue like:
Error with adautocfg.sh on the DB during final stage of upgrade
i folled documents but somehow i cant recreate xml file
i use this:
cd <RDBMS ORACLE_HOME/appsutil/bin
perl adbldxml.pl
but nothing happen!! it doesnt do nothing!
i rename my xml file under <RDBMS ORACLE_HOME/appsutil/ but there is no new xml file!!
Is anyone know why?
Thanks

Hi hussein;
Those note solved my problem, but i have one other problem now.. when i try to create new context file by usng :
perl adbldxml.pl tier=db appsuser=apps appspasswd=apps jtop=/u01/VIS/visdb/10.2.0/jre/1.4.2
i have this error:
FOLLOWING ERROR OCCURED :
+3 >= 3+
StackTrace:
java.lang.ArrayIndexOutOfBoundsException: 3 >= 3
at java.util.Vector.setElementAt(Unknown Source)
at oracle.apps.ad.context.GenerateContext.setJRETOP(GenerateContext.java:7483)
at oracle.apps.ad.context.GenerateContext.InstantiateRestForDB(GenerateContext.java:3057)
at oracle.apps.ad.context.GenerateContext.main(GenerateContext.java:8150)
Upgrade to DB 10g fails with error - cannot generate contextfile
i found note 369179.1, Note says i need to apply lastest autoconfig patch...
When i donwload patch 6372396 which is lasest patch number for r11( i sourced r11 env file), and try to apply patch to my system its gives me that:
AutoPatch error:
adprdf(): At line 3 in file u6372396.drv:
This patch is not compatible with your on-site release:
patch's intended release version and
on-site          release version
do not have identical major and minor version numbers (first two components)
patch's intended release is "11.5.0"
on-site          release is "12.0.4"
Processing line   10000.
Processing line   20000.
+24658 lines processed.+
AutoPatch error:
AutoPatch encountered errors parsing and loading the patch driver file.
+STRT_TASK: [Prereq checking logic] [] [Sun Jun 28 2009 09:04:57]+
So i decide to apply autoconfig patch 7237313 for r12, so i source r12 env file and then start path end its ended wihtout error
After i try to create context file by using this command again:
perl adbldxml.pl tier=db appsuser=apps appspasswd=apps jtop=/u01/VIS/visdb/10.2.0/jre/1.4.2
and have still same error :(
FOLLOWING ERROR OCCURED :
3 >= 3
StackTrace:
java.lang.ArrayIndexOutOfBoundsException: 3 >= 3
at java.util.Vector.setElementAt(Unknown Source)
at oracle.apps.ad.context.GenerateContext.setJRETOP(GenerateContext.java:7483)
at oracle.apps.ad.context.GenerateContext.InstantiateRestForDB(GenerateContext.java:3057)
at oracle.apps.ad.context.GenerateContext.main(GenerateContext.java:8150)
so now what i have to do?
thanks for advice

Am trying to download itunes as it has previously deleted during an update, and it comes up during the installation that there is a file error with my resources

Am trying to download itunes as it has previously deleted during an update, and it comes up during the installation that there is a file error with my resources

That's perfect, thanks.
error writing to file: C:\Program
files\ i tunes\ i tunes.Resources\ja.lproj\AppleTVStream
itxib. Verify that you have access to that directory
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Error finding target string from the repository

I am using Oracle Database 10g Release 10.2.0.2.0 - 64bit Production on Oracle Enterprise Linux
EM was not configured initially for a 2 node RAC database and now I am trying to configure it.
The instance names are orcl1 and orcl2 and database name is orcl.
When I am initially creating the repository I was doing it from RAC1 node where orcl1 instance sits.
So the database SID I entered was orcl1
But now the repository is created and when I log in to the EM I get this error when I look for metrics , performance or any other link.
Error finding target orcl.ie from the repository. The target does not exist or you may not have the access to the target.

I don't see an error message anywhere in your post. Don't post your impression of an error message. Post the full and complete message along with any relevant log file entries.

Workflow erroring with ORA-06512 on the Reserve document activity

Hi
Can anyone help? We have a intermittent problem where the workflow for a requisition or PO errors with the following:-
An Error occurred in the following Workflow.
Item Type = POAPPRV
Item Key = 101931-203179
User Key =3096034
Error Name = -6512
Error Message = ORA-06512: at line
Error Stack =
Wf_Engine_Util.Function_Call(PO_REQAPPROVAL_ACTION.RESERVE_DOC, POAPPRV, 101931-203179, 101776, RUN)
Activity Id = 101776
Activity Label = DOC_RESERVE_PROCESS:RESERVE_DOCUMENT
Result Code = #EXCEPTION
Notification Id =
Assigned User =
It can be moved on by retrying the worklfow but we are getting alot of these and some of our POs are time critical which is getting missed by the time we have realised we have an error.
We are currently on 11.5.10.2 and DB version 10.2.0.4 and we use RAC with 2 database teirs and 3 application teirs.
Regards
Ruth

Hi Srini
We have had a SR open from the start of March at a serverity 2 and its got nowhere. They say unless they can get a trace of it happening they cant do anything and since the problem is intermittent and not reproducable thats impossible to get as we have 800 users and between 300 to 400 pos being created a day.
I am hoping that maybe someone may have an idea of a direction i can look at on the forum as we are pulling our hair out.
Regards
Ruth

Error with Informatica when running the data load for BI Apps

Hi All,
We are facing a different issue on prod which we haven't got on QA. Below given is session log :
Target tables:
W_ORDER_PARTY
READER_1_1_1> RR_4050 First row returned from database to reader : (Wed Sep 22 10:36:16 2010)
READER_1_1_1> BLKR_16019 Read [885] rows, read [0] error rows for source table [S_ORDER_BU] instance name [S_ORDER_BU]
READER_1_1_1> BLKR_16008 Reader run completed.
LKPDP_1> DBG_21097 Lookup Transformation [LKP_ETL_PROC_WID]: Default sql to create lookup cache: SELECT ETL_PROC_WID,ROW_WID FROM W_PARAM_G ORDER BY ROW_WID,ETL_PROC_WID
LKPDP_1> TE_7212 Increasing [Index Cache] size for transformation [LKP_ETL_PROC_WID] from [1048576] to [1050000].
LKPDP_1> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
LKPDP_1:READER_1_1> DBG_21438 Reader: Source is [SFAPROD1], user [siebel]
LKPDP_1:READER_1_1> CMN_1021 Database driver event...
CMN_1021 [DB2 Event Using Array Inserts. connect string = [SFAPROD1]. userid = [siebel]]
LKPDP_1:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_1:READER_1_1> BLKR_16007 Reader run started.
LKPDP_1:READER_1_1> RR_4049 SQL Query issued to database : (Wed Sep 22 10:36:17 2010)
LKPDP_1:READER_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
LKPDP_1:READER_1_1> RR_4035 SQL Error [
*[IBM][CLI Driver][DB2/AIX64] SQL0204N "SIEBEL.W_PARAM_G" is an undefined name. SQLSTATE=42704*
sqlstate = 42S02
Database driver error...
Function Name : Execute
SQL Stmt : SELECT ETL_PROC_WID,ROW_WID FROM W_PARAM_G ORDER BY ROW_WID,ETL_PROC_WID
DB2 Fatal Error].
LKPDP_1:READER_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
LKPDP_1:READER_1_1> BLKR_16004 ERROR: Prepare failed.
WRITER_1_*_1> WRT_8333 Rolling back all the targets due to fatal session error.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [LKP_ETL_PROC_WID], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [EXPTRANS1], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [EXPTRANS1], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [SQTRANS], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [SQTRANS], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [SQTRANS], and the session is terminating.
TRANSF_1_1_1> DBG_21511 TE: Fatal Transformation Error.
WRITER_1_*_1> WRT_8325 Final rollback executed for the target [W_ORDER_PARTY] at end of load
WRITER_1_*_1> WRT_8035 Load complete time: Wed Sep 22 10:36:16 2010
In the above log W_PARAM_G table is a warehouse table. We have checked Informatica to find out the issue but there is no error in informatica.
Thanks in advance.
Deepak.

Hi Sandeep,
Yes but if you see the log ,its connecting to OLTP DB(DB2 for Siebel source DB),which it shouldnt
KPDP_1:READER_1_1> DBG_21438 Reader: Source is [SFAPROD1], user [siebel]
LKPDP_1:READER_1_1> CMN_1021 Database driver event...
*CMN_1021 [DB2 Event Using Array Inserts. connect string = [SFAPROD1]. userid = [siebel]]*
LKPDP_1:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_1:READER_1_1> BLKR_16007 Reader run started.
LKPDP_1:READER_1_1> RR_4049 SQL Query issued to database : (Wed Sep 22 10:36:17 2010)
LKPDP_1:READER_1_1> CMN_1761 Timestamp Event: [Wed Sep 22 10:36:17 2010]
LKPDP_1:READER_1_1> RR_4035 SQL Error [
*[IBM][CLI Driver][DB2/AIX64] SQL0204N "SIEBEL.W_PARAM_G" is an undefined name. SQLSTATE=42704*
I Have check the mapplet ,its same no issues in that as well.
Regards,
Deepak.

[SOLVED] Error with Nvidia Drivers (following the Beginner's Guide)

I followed the beginner's installation guide and everything worked fine all the way up untill updating the kernel module dependencies using the "depmod -a" command..
First I created the "xorg.conf" file with the "nvidia-xconfig" command and it said:
Make sure all instances of DRI are commented out:
# Load "dri"
However, there are no instances of "dri" in my xorg.conf file, so i skipped this step and moved on.
Next it said:
Double check your /etc/X11/xorg.conf to make sure your default depth, horizontal sync, vertical refresh, and resolutions are acceptable.
But I don't know what they should be set to, so I skipped this and moved on again.
This is where everything fails:
The next step is to use the following command to update the kernel module dependencies for the nVidia drivers.
depmod -a
But when i do that, it fails.
Anyone know possibly why or has had this issue?
Last edited by trusktr (2010-02-19 07:22:32)

PirateJonno wrote:um, I don't think you can just 'do' a kernel update, you have to wait for a new one to come out first
You can run any kernel version you wish on Arch, if you compile yourself, of course.
trustktr wrote:Hmmmm, yeah, that is a good question: When to run depmod -a?
When you first install the proprietary drivers. That's it, unless you will be maintaining a custom kernel system or something. In fact, the proprietary drivers might even run the depmod script themselves, I don't know, since it is a black box binary. Makes sense, but someone else would need to answer that.
EDIT: Also wanted to add that many shell commands throw no output whatsoever upon successful completion. Therefore, the absence of error output can be interpreted as no error. Just FYI.
Last edited by Misfit138 (2010-02-21 02:58:04)

Getting a error with red mark in the measures columns..

Hello Gurus,
When we try to run the report in analysis, In the columns its shows red mark like this..
Please anyone can help on this issue..?
Thanks
PSN

Hi
this issue is not related to analysis for office in general
its a GDI+ painting error, thrown by the .net framework.
Is your windows system on the latest patches??
Regards
Thorsten

Encounter error with command "New-MailboxFolder" (The specified mailbox doesn't exist)

[Symptom]
======================
Generally, a user can use “New-MailboxFolder” command to create mailbox folder for his own mailbox successfully. See the following example:
The above command creates a new folder named “PersonalFAQ” in the mailbox of Administrator.
However, this command cannot be used to create folders on other user’s mailbox although the full access permission is assigned. See the follow example. (We already granted the full access permission of
test1 user to administrator user)
Just as what the picture shows, an error message will appear:
“The specified mailbox “username” doesn’t exist.”
[Cause Analysis]
=======================================
It’s by default. The “New-MailboxFolder” command cannot be used to create folders for other mailboxes.
[Workarounds]
==============================
1. Use EWS channel to create the folders for other mailboxes.
http://msdn.microsoft.com/en-us/library/office/dn535504(v=exchg.150).aspx#bk_createfolderewsma
2. Use MFCMAPI:
3. PFDAVADMIN (Exchange 2003/2007) or Exfolders (Exchange 2010)
More information:
Creating Folders (Exchange Web Services)
http://msdn.microsoft.com/en-us/library/office/aa563302(v=exchg.140).aspx
New-MailboxFolder
http://technet.microsoft.com/en-us/library/dd335113(v=exchg.150).aspx
Microsoft Exchange Server MAPI Editor
http://www.microsoft.com/en-gb/download/details.aspx?id=2953
Exchange 2010 SP1 (and later) ExFolders
http://gallery.technet.microsoft.com/office/Exchange-2010-SP1-ExFolders-e6bfd405
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Since this issue is related to only one user, this means that the USERPARAMS information for this user is corrupted.
The issue could be resolved by deleting all entries related to this user on this table on the HFM DB.
Kindly open the HFM DB and look for the <application name>_userparams table.
and,
Delete the enteries corresponding to the user.Backup this table prior truncating the table.Please get this operation done by an administrator.
Edited by: user10931567 on 16-Jul-2009 10:03 AM

Once in a while, I get some errors with every tap on the screen, I've been getting this following error since a few days ago, it says" Your request cannot be processed, Error code 1009" . What is it and what should I do?

What does this error mean?! " your request cannot be processed, error code 1009".

Read through this article for iTunes Store troubleshooting:
http://support.apple.com/kb/TS3297

Error with SDO_MBR when crossing the antimeridian

Hello All,
we're using Oracle Spatial 11.2 and I notice a strange behavior when calculating the MBR of a multipart line which crosses the antimeridian.
//fails if multipart line and crosses the antimeridian
select SDO_UTIL.TO_WKTGEOMETRY(
SDO_GEOM.SDO_MBR(
    MDSYS.SDO_GEOMETRY('MULTILINESTRING((178 0, 179.99 1), (-179.99 1, -178 2))',8307)
) from dual;
//returns POLYGON ((-179.99 0.0, 179.99 0.0, 179.99 2.0, -179.99 2.0, -179.99 0.0)) which is incorrect
//succeeds if simple line and crosses the antimeridian
select SDO_UTIL.TO_WKTGEOMETRY(
SDO_GEOM.SDO_MBR(
    MDSYS.SDO_GEOMETRY('LINESTRING(178 0, 179.99 1, -179.99 1, -178 2)',8307)
) from dual;
//returns POLYGON ((178.0 0.0, -178.0 0.0, -178.0 2.0, 178.0 2.0, 178.0 0.0)) which is correct
//succeeds if multipart line and does not cross the antimeridian
select SDO_UTIL.TO_WKTGEOMETRY(
    SDO_GEOM.SDO_MBR(
    MDSYS.SDO_GEOMETRY('MULTILINESTRING((-170 0, -160 1), (-150 1, -140 2))', 8307))
) from dual;
// returns POLYGON ((-170.0 0.0, -140.0 0.0, -140.0 2.0, -170.0 2.0, -170.0 0.0))
Any ideas?
Thanks!
--john

When the geometry crosses the antimeridian, the MBR is not well defined.
In such cases, we make the best possible guess about where the geometry is crossing the meridian line.
In the case of your multi-line, the line does not really cross the meridian line. It has two line segments that are on either
side of the meridian line. So the MBR returned by Spatial is a valid result for this case.
If the line actually crosses the meridian, we know it is supposed to cross the meridian and the expected result is returned.
siva

Error with trial Installation of the BusinessObject Integration Kit for SAP

Hi
I am using the trial version of Installation of the BusinessObjects Integration Kit for SAP
while doing the installing it gives me the screen of
BW Publisher Parameter in which I need to fill the
Program ID
gateway host
gateway service
Can anyone please let me know where can I get the program id and gateway host and service
Regards
JM

Hi John,
those depend on you landscape. Take a look here:
Publishing part 1
/people/ingo.hilgefort/blog/2008/09/23/businessobjects-and-sap--publishing-of-crystal-reports-part-1-of-3
Publishing part 2
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-2-of-3
Publishing part 3
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-3-of-3
and you can also look into the Installation Guide for the SAP Integration Kit
Ingo

Error message when I run the Web Dynpro Project

Dear friend,
I had deploy & run project, but it's got the error message under the line:
I had install NWDS V. 2.0.11 on my PC, but the project which I deployed was the version that I created by NWDS V. 2.0.9, and I had install new OS as XP Home instead the old one (Windows2000), are these the cause of problem?
Please advise how can I do.
Best regards,
SeMs
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; Media Center PC 3.0; .NET CLR 1.0.3705), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Vendor: SAP, Build ID: 6.4009.00.0000.20041104173322.0000 (release=630_REL, buildtime=2004-11-18:22:17:10[UTC], changelist=298578, host=PWDFM027)
Web Dynpro code generators of DC local/ZWelCome:
SapDictionaryGenerationCore: 6.4011.00.0000.20050127161623.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:34:47[UTC], changelist=324383, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4011.00.0000.20050121170001.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:38:14[UTC], changelist=322883, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4011.00.0000.20050121165648.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:28:49[UTC], changelist=322878, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4011.00.0000.20050217164947.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:53:22[UTC], changelist=329752, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4011.00.0000.20050217164947.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:53:22[UTC], changelist=329752, host=PWDFM026)
SapGenerationFrameworkCore: 6.4011.00.0000.20041104141254.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:28:00[UTC], changelist=298452, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4011.00.0000.20050215134310.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:42:02[UTC], changelist=329103, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4011.00.0000.20040609163924.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:32:12[UTC], changelist=253570, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4011.00.0000.20050121165648.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:28:59[UTC], changelist=322878, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4011.00.0000.20050215134310.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:42:32[UTC], changelist=329103, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: (unknown)
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
J2EE Engine:
No information available
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_08-b03, vendor: Sun Microsystems Inc.
Operating system:
Windows 2000, version: 5.0, architecture: x86
Message was edited by: Sukasem S.wattanakoon
Message was edited by: Sukasem S.wattanakoon

Probably the usual problem of deploying an application built with a newer NWDS (SP11) on an older server (SP9).
But without the stacktrace this is only a guess.
Armin

Error with JSF for Single Page in MY Project But rmaining pages are working

SEVERE: Servlet.service() for servlet Faces Servlet threw exception
javax.servlet.jsp.JspException: The absolute uri: http://java.sun.com/jsf/core cannot be resolved in either web.xml or the jar files deployed with this application
at tags.templates.InsertTag.doEndTag(InsertTag.java:26)
at org.apache.jsp.updatetpl_jsp._jspx_meth_template_insert_0(updatetpl_jsp.java:123)
at org.apache.jsp.updatetpl_jsp._jspService(updatetpl_jsp.java:65)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:322)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:291)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:362)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:463)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:398)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:322)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:130)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:362)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:856)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:744)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:595)
update.jsp
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<%--
The taglib directive below imports the JSTL library. If you uncomment it,
you must also add the JSTL library to the project. The Add Library... action
on Libraries node in Projects view can be used to add the JSTL 1.1 library.
--%>
<%--
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
--%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<f:view>
<h:form id="customerform">
<h:dataTable id="updatecustomers" value="#{data.updateModel}" var="updat">
<h:column>
<f:facet name="header">
<h:outputText value="CustomerNumber"/>
</f:facet>
<h:inputText value="#{updat.customerNumber}"/>
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="FirstName"/>
</f:facet>
<h:inputText value="#{updat.firstName}"/>
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="LastName"/>
</f:facet>
<h:inputText value="#{updat.lastName}"/>
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="StreetAddress"/>
</f:facet>
<h:inputText value="#{updat.streetAddress}"/>
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="City"/>
</f:facet>
<h:selectOneMenu id="chooseCity" value="#{updat.city}"required="true">
<f:selectItem itemValue="TVM" itemLabel="TVM"/>
<f:selectItem itemValue="Cochin" itemLabel="Cochin"/>
<f:selectItem itemValue="Bglr" itemLabel="Bglr"/>
<f:selectItem itemValue="Mysore" itemLabel="Mysore"/>
<f:selectItem itemValue="Calicut" itemLabel="Calicut"/>
</h:selectOneMenu>
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="State"/>
</f:facet>
<h:selectOneMenu id="chooseState" value="#{updat.state}"required="true">
<f:selectItem itemValue="KL" itemLabel="Kerala"/>
<f:selectItem itemValue="KA" itemLabel="Karanataka"/>
</h:selectOneMenu>
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="Zip"/>
</f:facet>
<h:inputText value="#{updat.zip}"/>
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="Save"/>
</f:facet>
<h:commandButton id="savesubmit" value="Save" action="#{data.saveData}">
</h:commandButton>
</h:column>
</h:dataTable>
</h:form>
</f:view>
web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<context-param>
<param-name>com.sun.faces.verifyObjects</param-name>
<param-value>false</param-value>
</context-param>
<context-param>
<param-name>com.sun.faces.validateXml</param-name>
<param-value>true</param-value>
</context-param>
<context-param>
<param-name>javax.faces.CONFIG_FILES</param-name>
<param-value>/WEB-INF/faces-config.xml</param-value>
</context-param>
<context-param>
<param-name>javax.faces.STATE_SAVING_METHOD</param-name>
<param-value>client</param-value>
</context-param>
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>*.faces</url-pattern>
</servlet-mapping>

<listener>
<listener-class>com.sun.faces.config.ConfigureListener</listener-class>
</listener>
<session-config><session-timeout>
30
</session-timeout></session-config>
<welcome-file-list><welcome-file>
index.jsp
</welcome-file></welcome-file-list>
<taglib>
<taglib-uri>/WEB-INF/tlds/template.tld</taglib-uri>
<taglib-location>/WEB-INF/tlds/template.tld</taglib-location>
</taglib>
</web-app>
please help me i am working with net beaans............i have added all required .jar files with that.

The question mark icon on the dlls indicates that LabVIEW is unsure of
the location of the DLL, or is unable to locate the DLL on your
system. This can happen if the DLLs do not exist, or if the "Call
Library Function Node" just specifies the name of the dll, and not the
entire path to the dll. IVI and Instrument driver VIs will
typically not supply the entire path to the DLL, whch would cause the
question mark icon to appear.
If your application is working properly, then you should ignore the
question mark in the dependencies list. If your application is
broken because the DLLs cannot be found, they are installed with the
following drivers:
ivi.dll is installed with the IVI compliance package, which is available at the following link:
Drivers and Updates: IVI Compliance Package
You should also install the latest version of NI-VISA, which is required by the IVI Compliance Package:
Drivers and Updates: NI-VISA
ag3325b_32.dll is installed with the your instrument's IVI driver, which can be found below:
Agilent 3325b Instrument Driver
Jason S.
Applications Engineer
National Instruments

Error with target resource of the FPGA in project tree

Similar Messages

Maybe you are looking for