Error with transporting datasource

Hello,
I have an issue activating a datasource. I created a generic datasource called 'ZHIP_TD_CLOSE_INV_BALANCE' within BW - i.e the source is BI and NOT R/3. I created transformation from datasource to Cube and loaded data. Everything is working fine. Now when I transport the datasource from Dev to Quality the transport failed. The error log says 'InfoSource ZHIP_TD_CLOSE_INV_BALANCE is not available in source system WP1CLNT310' & 'Error when activating DataSource ZHIP_TD_CLOSE_INV_BALANCE WP1CLNT310'. I do not have an infosource to begin with. So then when I go and try to activate the datasource in Quality, I get the same message i.e. 'InfoSource ZHIP_TD_CLOSE_INV_BALANCE is not available in source system WP1CLNT310'. How do I fix the error and get the transports through? Remember, the existing config works fine in Dev. Thanks for your help in advance.
Thanks
Nisha

what objects are you trying to transport along with the data source ? If you have transfer rules along with this request then might be you would get this error. Also check if your source conversion is maintained correctly. you can check that in RSA1 > Tools > Conversion of Source system names.
Here maintain the system conversion. Once done, recreate a transport request with only data source and transport. Once done replicate and  transport your other objects.

Similar Messages

  • Error while transporting Datasources in Production

    Dear All,
    I have facing a problem while transporting objects pertaining to BI Cockpit in Production.
    Earlier I had transported all the obects (in more than one transports) in Quality (from Development). After testing the objects, I had imported the same number of transports (and in the same order) to Production and now some of the requests have ended in errors like:
    DataSource 0TCTWHMTFM_TEXT does not exist in source system PW1CLNT003 of version A
    Such errors have occured for most of the Datasources.
    Can anyone let me know
    1) Why the transports have failed while importing in Production when similar requests have been transported successfully to Quality.
    2) The possible solution to correct the error.
    Request your kind help to overcome this problem.
    Regards
    Shalabh

    Dear All,
    Thanks for your kind reply.
    There are no R/3 Datasources involved. Our BI Cockpit landscape is based upon only BI system. No data transfer to take place between R/3 and BI.
    Secondly, you mean to say that I need to replicate my Source system in Production and then proceed with the transporting of the requests from Dev to Prod.
    But I never did the same in Quality while transporting from Dev. Is it that it might have been done in Quality beforehand by someone ?
    Also, when the Datasources have not been transported to Production (resulting in error) then how can i replicate these datasources in Production ???
    Let me know if I have not understood correctly.
    Many thanks again for your efforts.
    /Shalabh

  • Error when transporting datasource and transformation from DEV to QA

    I'm attempting to transport a DataSource that was converted to 7.0 from 3.x along with its transformation to QA I receive the following log error. I've most post in regards to very similar errors but nothing showing 'Errors occurred during post-handling RS_AFTER_IMPORT for RSDS L' what is this?
    Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
    Activation of Objects with Type Transformation
    Checking Objects with Type Transformation
    Checking Transformation 0R526789C2X70Q5XBGCAQ0G3Y4Q7LV9A
    No rule exists
    Saving Objects with Type Transformation
    Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Delete Mode)
    Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Delete Mode)
    Errors occurred during post-handling RS_AFTER_IMPORT for RSDS L
    RS_AFTER_IMPORT belongs to package RS
    The errors affect the following components:
       BW-WHM (Warehouse Management)
    Post-import method RS_AFTER_IMPORT completed for RSDS L, date and time: 20071018113149
    Post-import methods of change/transport request D30K913684 completed
         Start of subsequent processing ... 20071018113116
         End of subsequent processing... 20071018113149
    Execute reports for change/transport request: D30K913684
    Reports for change/transport request D30K913684 have been executed
         Start of................ 20071018113149
         End of.................. 20071018113149
    Execution of programs after import (XPRA)
    End date and time : 20071018113149
    Ended with return code:  ===> 8 <===

    Hi Davis,
    Before transporting transformation make sure either of source or target should availble in target system.
    suppose you have a transformation between Data source and Data Target, first transport Data source, then transport Transformation along with data target.
    Before tansporting Transformation either source or target should be avaialble in QA system..then only transportation will happen smoothly..
    Hope this helps.
    regards
    SK

  • Error with Transport system not configured that may be related to CHaRM

    Who has in depth knowledge on setting up SAP Solution Manager CHaRM. Had an odd problem with the transport system failing when the QA system was shut down for maintenance. Transports were not able to be created or save to.  Error message was Transport System not configured.  Brought up QA and re-distributed system and Transport group and transport requests started working again.

    Hello,
    if a system, e.g. QA system, will not be available due to a maintenance task,
    we set the status of this system to "temporarily inactive" (see header data in transaction SMSY).
    This status allows us, to create new transport requests in DEV-System although consolidation system QA is not available.
    (Of course you have to reset the status, when QA-system ist started again.)
    Hint: it is not possible to release or to import a transport request, when consolidation system is shut down.
    Therefore the developer should pay attention to the messages, which raise in urgent corrections.
    best regards
    Horst

  • Error with standart  datasources

    Hi all,
    i'm activating standart datasources on CRM, i first transefered the application component hierarchy and second the data sources i want to use.
    When i test any of the transfered data sources (RSA3) i get an error, the log says:
         "The extraction program does not support object 0SLS_ACTIV_TEXT"
    (taking 0SLS_ACTIV_TEXT as example).
    Any clue on how to solve this ?
    thx in advance.

    solve it activating metadata for data sources on transaction BWA5.
    thanks anyway.

  • Error while transporting webservice datasources

    Hi all,
    I have created webservice datasources to fetch EP data to BW. and now i am transporting that Datasources from DEV to QA. I have colllected datasources alone in one req. (source system i have created in QA manually and i mapped that with DEV)
    But while transporting i am getting the folllowing error,
    3S3T   Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)  
    Error  Screen output without connection to user .                                                                               
    Error when activating DataSource ZANS_MASTER BI7001                                                                               
    Please through some light is there any predefined settings i need to do in QA system?.
    Thanks in advance,
    V.Sen

    Dear All,
    Thanks for your kind reply.
    There are no R/3 Datasources involved. Our BI Cockpit landscape is based upon only BI system. No data transfer to take place between R/3 and BI.
    Secondly, you mean to say that I need to replicate my Source system in Production and then proceed with the transporting of the requests from Dev to Prod.
    But I never did the same in Quality while transporting from Dev. Is it that it might have been done in Quality beforehand by someone ?
    Also, when the Datasources have not been transported to Production (resulting in error) then how can i replicate these datasources in Production ???
    Let me know if I have not understood correctly.
    Many thanks again for your efforts.
    /Shalabh

  • Error while transporting custom datasource

    Hi All,
    Below is the scenario that was carried out in my project.
    1. Created OHD to load data from a CUBE to Data base Table /BIC/ABC.
    2. Created a custom Datasource ZABC_TEST with the above table.
    3. Activated the DataSource and loaded the data. (Data load successfull. It works fine).
    4. Tried transporting the above. But trows error while transporting the data source.
    Error -- InfoSource ZABC_TEST is not available in source system BITST.
    Let me know what can be done to solve the above error. Please suggest if i have missed out something.
    Thanks in advance.
    Maddy

    HI,
    The problem seems to be occuring since you are transporting both OHD and DS in the same TR request.
    Transport first the DS in a request, then in another request transport the OHD.
    This should resolve the issue.
    hope this helps.
    thanks,
    rahul

  • Error while transporting Generic Datasource in R/3

    Hi All,
    I have created a generic datasource(R/3) on a view. As it was in $TMP, I have assigned the datasource, ZABCD, and the view, ZVIEW to a devlopment package and also to a transport request. I released the Transport request and when I tried to import it into Q, it throwed me an error with below messages:
    Extract structure ZOX**** is not active
    The extract structure ZOX**** of the DataSource ZABCD is invalid
    Errors occurred during post-handling RSA2_DSOURCE_AFTER_IMPORT for OSOA L
    The errors affect the following components:
    BC-BW (SAP Business Information Warehouse Extractors)
    The extract structure ZOX**** is the structure used by the datsource. I forgot to assign that to the earlier TR and I think the error is because the structure is missing in the TR. Am I correct?
    How should I deal with it now? DO I need to create a new TR with this structure alone as the earlier TR is already released?
    Thanks,
    RPK.

    As you comment it is possible error was not include the structure in earlier TR.
    You can create, in se09 or se10, an empty TR. In these transactions you have a buttoun with a box drawed. Set focus on your new empty TR and push button.
    Add object from TR transported with error and the missed structure.

  • Error in transporting technical content  Datasource

    Hello
    We are facing issues with transporting the Datasource ans associated transfer rules for 0TCTSOURSYS_ATTR from development to quality.
    When transporting the following objects:
    >Datasource Replica
    >Transfer Rules
    >Transfer structure
    we are receiving the following error in the quality box during the import process:
    Methos execution ended with errors < return code 8>
    Start of the after-import method for object type R3TR ISMP (Activation Mode)
    DataSource 0TCTSOURSYS_ATTR does not exist in source system WFNCLNT100 of version A
    Mapping between data source 0TCTSOURSYS_ATTR and source system WFNCLNT100 is inconsistent
    DataSource 0TCTSOURSYS_ATTR does not exist in source system WFNCLNT100 of version A
    Field RLOGSYS will not be delivered from DataSource 0TCTSOURSYS_ATTR in source system <Quality box>
    Field SLOGSYS will not be delivered from DataSource 0TCTSOURSYS_ATTR in source system <Quality box>
    Field SRCTYPE will not be delivered from DataSource 0TCTSOURSYS_ATTR in source system <Quality box>
    Start of the after-import method for object type R3TR ISTS (Activation Mode)
    Reference to transfer structure 0TCTSOURSYS_ATTR_VA not available. No activation possible.
    If i check for this DS in table ROOSOURCE on the quality box I see that there in an entry with Delivered status (no entry for active version)
    checking in RSA5 I can find this datasource - however I cannot find it in RSA6
    In the development box this DS has both the active version and the delivered version - I can find the DS in RSA5 and RSA6
    Clicking on the transport button in RSA6 just gives a message that action completed succesfully. Therefore I tried tranporting it through tranport connection.
    Please advise as to where I am going wrong and how to proceed.
    Thanks in advance

    HI,
    Generally  the flow will be like this from Dev to Quality and then to Production and in the similar way the datasource also needs to be transported in the source system also
    D1 ->Q1 ->P1 (D-development,Q-quality,P-Production)
    SD1->SQ1->SP1 (SD-source development,SQ-Source Quality,SP-Source Production)
    please check whether the fields is present in the source system of the quality( or data source in our BW system) if not you need to transport them again
    Please let me know if you have any questions
    Regards,
    MADhu.

  • Transport error when transporting a transformation with formulas/routines

    Hi All,
    I have migrated some 3.5 dataflow (Datasource, Transfer rules, Update rules, Infosource etc..) to 7.0. I am able to load the datatargets using the DTP's just fine.
    The problem I am facing is transporting these dataflows to Quality and Production systems. I am specifically having problem with transporting transformations which has formulas/routines.
    I was able to transport the transformations with direct mapping from source field to target fields (no formulas/routines) without any problem and it works fine in Quality system. I tried to transport couple of transformations with formulas/routines, all of them give a shortdump ASSERTION_FAILED (transport fails with error code 12).
    I am not sure what the problem is. We are on support package 16. Has anyone faced this problem before? Any suggestions are appreciated.
    Points are assured
    Thanks,
    Sirish.

    Hi,
    What is the dump message you are getting? Check in ST22 and let us know. And try the process which is said in the previous post collect all the transformations through transport connections and transport them.
    Khaja

  • Transport Error: Cannot replicate datasource

    Hello Experts,
    I am trying to transport some requests from the dev to the the testing client. We have been facing a lot of errors while transporting which have all been fixed.
    But we are still getting one error, viz.
    ' Start of the after-import method RS_ISFS_AFTER_IMPORT for object type(s) ISFS (Activation Mode)
    Cannot replicate DataSource'
    Please help me with this issue.
    Regards,
    Prince

    Hi,
    As per the error message it appears that the datasource needs to be replicated in the target system of the transport. Please go to RSA1 in the
    Target BI system, select the source system that the datasource belongs to under the heading  'source systems, if you right click on the relevant
    source system there should be an option 'Datasource preview', if you click on this option you can then search for your datasource and right click on the
    datasource to replicate it. If you expand the error log for the failed transport/import in the target system you can find the technical name of the datasource.
    When you have this done please try the transport again.
    Best Regards,
    Des.

  • Error when transporting Oracle datasource and transformation.

    I am doing transports in BI 7.0 from DEV to PRD. While moving transformation for Oracle Data Source to PRD, I am facing the method of execution error in transport. Please note for the same target we are using two transformations from different Oracle data sources. One is getting transported to PRD.  while the other one is failing with error message source system does not exist.
    Please help me to solve this issue. Points will be assigned.

    Hi Davis,
    Before transporting transformation make sure either of source or target should availble in target system.
    suppose you have a transformation between Data source and Data Target, first transport Data source, then transport Transformation along with data target.
    Before tansporting Transformation either source or target should be avaialble in QA system..then only transportation will happen smoothly..
    Hope this helps.
    regards
    SK

  • BEA-001156 error repates with DR datasource in 10.3.2

    I am getting an below error with 10.3.2 DG statsource (listner is down ). we have same configuration in 10.3.1 and errors out first time and does not repeat unlike 10.3.2 . any help is appreciated.
    ####<Jan 31, 2011 10:05:47 AM PST> <Warning> <JDBC> <hswebt1> <hsserver1> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1296497147549> <BEA-001129> <Received exception while creating connection for pool "DSESIDGDataSource": The Network Adapter could not establish the connection>
    ####<Jan 31, 2011 10:05:47 AM PST> <Info> <JDBC> <hswebt1> <hsserver1> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1296497147551> <BEA-001156> <Stack trace associated with message 001129 follows:
    java.sql.SQLException: The Network Adapter could not establish the connection
    at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
    at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:199)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:480)
    at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:413)
    at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:508)
    at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:203)
    at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:33)
    at oracle.jdbc.driver.OracleDriver.__AW_connect(OracleDriver.java:510)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:320)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:220)
    at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1180)
    at weblogic.common.resourcepool.ResourcePoolImpl$ResourcePoolMaintanenceTask.timerExpired(ResourcePoolImpl.java:2387)
    at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: oracle.net.ns.NetException: The Network Adapter could not establish the connection
    at oracle.net.nt.ConnStrategy.__AW_execute(ConnStrategy.java:328)
    at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java)
    at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:421)
    at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:634)
    at oracle.net.ns.NSProtocol.__AW_connect(NSProtocol.java:208)
    at oracle.net.ns.NSProtocol.connect(NSProtocol.java)
    at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:966)
    at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:292)
    at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:508)
    at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:203)
    at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:33)
    at oracle.jdbc.driver.OracleDriver.__AW_connect(OracleDriver.java:510)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:320)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:220)
    at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1180)
    at weblogic.common.resourcepool.ResourcePoolImpl$ResourcePoolMaintanenceTask.timerExpired(ResourcePoolImpl.java:2387)
    at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: java.net.ConnectException: Connection refused
    at java.net.PlainSocketImpl.socketConnect(Native Method)
    at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
    at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
    at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
    at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
    at java.net.Socket.connect(Socket.java:525)
    at java.net.Socket.connect(Socket.java:475)
    at java.net.Socket.<init>(Socket.java:372)
    at java.net.Socket.<init>(Socket.java:186)
    at oracle.net.nt.TcpNTAdapter.connect(TcpNTAdapter.java:127)
    at oracle.net.nt.ConnOption.connect(ConnOption.java:126)
    at oracle.net.nt.ConnStrategy.__AW_execute(ConnStrategy.java:306)
    at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java)
    at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:421)
    at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:634)
    at oracle.net.ns.NSProtocol.__AW_connect(NSProtocol.java:208)
    at oracle.net.ns.NSProtocol.connect(NSProtocol.java)
    at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:966)
    at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:292)
    at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:508)
    at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:203)
    at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:33)
    at oracle.jdbc.driver.OracleDriver.__AW_connect(OracleDriver.java:510)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:320)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:220)
    at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1180)
    at weblogic.common.resourcepool.ResourcePoolImpl$ResourcePoolMaintanenceTask.timerExpired(ResourcePoolImpl.java:2387)
    at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

    let me try that. here is my multi datasource xml.
    <?xml version='1.0' encoding='UTF-8'?>
    <jdbc-data-source xmlns="http://xmlns.oracle.com/weblogic/jdbc-data-source" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblo
    gic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/jdbc-data-source http://xmlns.oracle.com/webl
    ogic/jdbc-data-source/1.0/jdbc-data-source.xsd">
    <name>MDSESIOMMultiDataSource</name>
    <jdbc-data-source-params>
    <jndi-name>jdbc/ds/omds</jndi-name>
    <algorithm-type>Failover</algorithm-type>
    <data-source-list>DSESIOMDataSource,DSESIOMDGDataSource</data-source-list>
    <failover-request-if-busy>false</failover-request-if-busy>
    </jdbc-data-source-params>
    </jdbc-data-source>
    and actual jdbc config xml.
    <?xml version='1.0' encoding='UTF-8'?>
    <jdbc-data-source xmlns="http://xmlns.oracle.com/weblogic/jdbc-data-source" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblo
    gic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/jdbc-data-source http://xmlns.oracle.com/webl
    ogic/jdbc-data-source/1.0/jdbc-data-source.xsd">
    <name>DSESIDGDataSource</name>
    <jdbc-driver-params>
    <url>jdbc:oracle:thin:@DBD1.net:1521:eodsd10g</url>
    <driver-name>oracle.jdbc.OracleDriver</driver-name>
    <properties>
    <property>
    <name>user</name>
    <value>hist_conn</value>
    </property>
    </properties>
    <password-encrypted>{AES}AN9Yw6RZeH/ez0N272gp+dOF926FjteSjojdcZPCKGQ=</password-encrypted>
    </jdbc-driver-params>
    <jdbc-connection-pool-params>
    <test-table-name>DUAL</test-table-name>
    </jdbc-connection-pool-params>
    <jdbc-data-source-params>
    <jndi-name>jdbc/ds/esidev2</jndi-name>
    <global-transactions-protocol>None</global-transactions-protocol>
    </jdbc-data-source-params>
    </jdbc-data-source>

  • Error in transporting ODS(Error when creating the export DataSource.......)

    Hi All,
        When I try to transport ODS from dev to quality i m getting the following error.
      <b>DataSource 8XADDR1 does not exist in source system BQ1CLNT355 of version A  
    Error when creating the export DataSource and dependent Objects             
    Error when activating ODS Object XADDR1                                     
    </b>
        <b>XADDR1</b> is my ODS.  <b>BQ1CLNT355</b>  is myself source system. When i checked the connection in the source system tab in Quality,it is ok.
      Please Suggest solution,if any body encountered same problem. It is very urgent for me.
    Regards,
    Ramana.

    Hi
    You generate export datasource once again
    Replicate your source system in qual and then try to transport the ODS and the datamart object 8ODS ....
    Hope this helps
    Reg
    N Ganesh
    assign points if useful***

  • Help with Transport control program tp ended with error code 0203

    when i import queue and transport queue from dev to prd ,error show:
    Transport control program tp ended with error code 0203
    Message no. XT200
    Diagnosis
    An error occurred when executing a tp command.
    Command: IMPORT DEVK900298 P01 clientP01 U0 pf=/usr/sap/tra
    Return code: 0203
    Error text: wrong syntax in tp call
    Request: DEVK900298
    System Response
    The function terminates.
    Procedure
    Correct the error and execute the command again if necessary.

    Thank you !
    My DEV system  TP profile parameters is :
    TRANSDIR            = /usr/sap/trans
    DEV/CTC             = 0
    DEV/DBHOST          = P550A
    DEV/DBLIBPATH       = /usr/sap/DEV/DVEBMGS01/exe
    DEV/DBNAME          = DEV
    DEV/DBTYPE          = ora
    DEV/NBUFFORM        = 1
    DEV/TP_VERSION      = 266
    #System from Transport Domain DOMAIN_P01
    #TMS:0002:DOMAIN_P01
    P01/DUMMY           = 1
    P01/NBUFFORM        = 1
    P01/TP_VERSION      = 266
    P01/CTC             = 1
    My PRD system  TP profile parameters is :
    P01/CTC             = 0
    P01/DBHOST          = XCPRD01
    P01/DBLIBPATH       = /usr/sap/P01/DVEBMGS01/exe
    P01/DBNAME          = P01
    P01/DBTYPE          = ora
    P01/NBUFFORM        = 1
    P01/TP_VERSION      = 266
    #System from Transport Domain DOMAIN_DEV
    #TMS:0009:DOMAIN_DEV
    DEV/DUMMY           = 1
    DEV/NBUFFORM        = 1
    DEV/TP_VERSION      = 266
    DEV/CTC             = 1

Maybe you are looking for