Error With Ubuntu and windows 8 dual boot
I have a levovo x240 and I had Ubuntu and windows 8 dual booted I removed the Ubuntu partition in windows partition modifier and when I restarted my computer it launch "grub rescue> "
How do I boot into windows and stop this problem
Yes, instead of posting in a forum dedicated to type, post in a forum associated with Premiere.
I will move your post for you.
- Dov
Similar Messages
-
ATI display driver lost with Linux and XP dual boot os
I brought ThinkPad W500 with windows vista. I want to get rid of the hidden boot system reserved partition and downgrade to windows xp and install OpenSuse os. Following some sourses found on the web, I first set the bios sata ahci mode to compatable mode. Then install windows xp and update the sata driver. Restart and reset the bios sata back to ahci mode. It works fine with windows xp and I install back all driver. Finally I install OpenSuse and create dual boot with Grub.
But a serious problem come up with me. Everytime after restart from the linux os and back to windows xp, xp doesn't regonize the ATI display divice and tell me no driver installed with low screen resolution. And I have to restart the machine and boot direct into xp for the second time and the problem gone. But it is so annoying of doing this everytime. Anyone can help? Many thanks.
Solved!
Go to Solution.Hi stanleyimko,
I don't have an answer, just a couple of questions:
Does your W500 have switchable graphics? If so, you may have to turn off "let the OS detect" or permanently select one or the other in BIOS. XP isn't switchable aware, so I don't know why that would make a difference.
Do you see the problem on cold (re) boot to XP, or only on warm reboot from Linux to XP?
Seems like something is leaving your BIOS in an odd state (I guess that's obvious) and maybe a cold reboot would sort it.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
How to run solaris 10 and windows, dual booting.
I installed solaris 10 first and then windows 2000 on my celeron pc. Nopw every time i start pc, it starts windows, coz of windows mbr.
how to set at startup before booting the option which ask for solaris or windows? suggest me a easy way as i am a new user of solaris.The procedure to reinstall the Solaris boot sector
(along with lots of info on dual booting) can be
found here: http://multiboot.solaris-x86.org
Another approach is to use the Windows 2000/XP boot
menu. Assuming your S10 DVD is on D:\, type at a
command prompt:
copy
d:\Solaris_10\Tools\Boot\usr\lib\fs\ufs\mboot
c:\bootsect.solThen add the following line at the end of the
C:\boot.ini file:
C:\bootsect.sol="Solaris"(google "boot.ini" for more info on the above)
Now Windows will display a boot menu where you can
choose between Win2K and Solaris.
BlaiseThe menu appears as you mentioned but there is another problem it tells me that there is no active partitions.
i have to hards in my system, and it seems i screwed the booting thing during installation since this is the first time i install solaris.
regards
firas nemer -
I/O errors with certain discs- Windows w/Boot Camp Please help.
I wasn't sure which forum to post this problem in. It fits in a few categories, so I apologize if I've gotten it wrong.
I tried to install a game (Last Half of Darkness, 2005) yesterday, and with about 1/3 of installation complete, I got this message: An error occurred while trying to copy a file: I/O error 23. I had my choice of abort, retry or ignore. After the 1st error message I chose retry. After a bit more of the installation I got another error message: I/O 1117. I then tried to ignore, that didn't work, so I aborted. I tried to install a second time, and even tried a second copy of the same game, then tried to install the 2007 sequel to Last Half, same error messages. After each attempt at installation, I could not get the drive to eject the disc. I eventually did by restarting in OSX. My iMac is 13 months old. In November I had a similar problem with another game, this one from about 2004. In that case, the game installed, but froze a few minutes into playing. Because I couldn't play, and couldn't eject, without a great deal of time and "spinning" noise, I took the computer to the Apple Store to have them look at it. I figured that if it was 2 months from being out of warranty, I should get it fixed right then. Of course all the messing with it they did showed no drive problems. All other CD or DVDs, either commercial or homemade, music, video or games have installed and run just fine.
An internet search found this: http://support.microsoft.com/kb/891894 I did everything except the clean boot install, and contacting the manufacturer. After changing the transfer mode per these instructions, I could get all of 2/3 of the way through installation before the error messages popped up.
All drivers are up-to-date according to Windows automatic update and Apple update.
This is my 4th Mac, so I have little experience with PC/Windows. Can anyone give me a suggestion as to what I can do to install and play these games? Any help greatly appreciated.
RuthHi Ruth,
I sure don't know what the issue is however you might want to go to the Bootcamp forum and post it, maybe someone knows there.
http://discussions.apple.com/category.jspa?categoryID=237
Regards,
Roger -
Error with premiere and windows 8.1
I have recently update my PC system to windows 8.1. I reinstalled Premiere 7.0 and now I can't make it work. It crushes when I try to create a new project and the program send a massage saying that there was an error and the program will close to try a solution and will let me know.
I already try disabling antivirus and firewall.
Any suggestion??Yes, instead of posting in a forum dedicated to type, post in a forum associated with Premiere.
I will move your post for you.
- Dov -
OS X and Arch dual-boot on MBP - bootloader error
I have a Macbook Pro 9,2, and I dual-boot OS X and Arch. My main Arch partition is encrypted with an LVM on LUKS setup, and my main OS X partition is encrypted with Firevault 2. I run the vanilla Arch kernel, and I use xfce as my DE. I use refind as my boot manager, and grub as the bootloader for the Arch partition. This setup has worked flawlessly for several months. I update my Arch system once per week, and last Sunday was a large update since xfce got a large overhaul (in terms of program and config files). However, since the update I cannot boot into OS X (I am posting this here instead of an OS X forum since no change occurred to the OS X system so the problem must be with a change to my Arch system).
When I attempt to boot into OS X, I am asked for my password to decrypt the partition, but then I get the following error message:
efiboot loaded from device: Acpi (PNP0A03,0)/Pci(1F12)/SATA(0,0)/HD(Part3.Sig698A
48BA-88E6-471C-9359-AD63C7EEBE74
boot file path: \System\Library\CoreServices\boot.efi
............Read error 0x6
Error loading kernel cache (0x6)
Error: Aborted returned from boot.efi
*Hit any key to continue*
Starting boot.efi
Using load options ''
efiboot loaded from device: Acpi (PNP0A03,0)/Pci(1F12)/SATA(0,0)/HD(Part3.Sig698A
48BA-88E6-471C-9359-AD63C7EEBE74
boot file path: \com.apple.recovery.boot\boot.efi
.............Read error 0x6
Error loading kernel cache (0x6)
Error: Aborted returned from boot.efi
*Hit any key to continue*
When I hit a key, I get taken back to the refind menu. If I choose OS X again, I get the same error. This cycle can be repeated ad nauseam. Booting into my Arch partition, on the other hand, works just fine, with one hiccup. While usability does not seem to be reduced, after I input my password to decrypt the Arch partition, and before I see the tty1 login, I (since Sunday) occasionally get the following error message that I have never had before:
19.636262] [drm:crypt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder
19.636264] [drm:crypt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
19.331860] ata1.00: exception Emask 0x50 SAct 0x1100 SErr 0x280900 action 0x6 frozen
19.331927] ata1.00: irq_stat 0x08000000, interface fatal error
19.331974] ata1: SError: {UnrecovData HostInt 10B8B BadCRC }
19.332821] ata1.00: failed command: READ FPDMA QUEUED
19.332866] ata1.00: cmd 60/00:40:70:c1:01/01:00:24:00:00/40 tag 8 ncq 131072 in
19.332866] res 40/00:60:b0:55:2a/00:00:24:00:00/40 Emask 0x50 (ATA bus error)
19.332176] ata1.00: status: { DRDY }
The "READ FPDMA QUEUED" line and those below it repeat a few time with different numbers following "cmd" and "res," but then after a few moments the messages clear off the screen and I arrive at my tty1 login screen and from there everything in Arch (including my now-upgraded DE) works normally. This error does not occur during all boots, but I cannot discern any pattern behind when I see it and when I do not. The OS X error and failure to boot occurs every time I try to boot into OS X.
I have learned a lot as an Arch user, but this problem is beyond me. Google has not been particularly friendly, understandably so given the peculiarity of the problem and my setup. I have not yet tried undoing the update I did on Sunday because (a) it would be a pain since there were >30 packages that were upgraded, and (b) I have no evidence that the upgrade was actually causative of this issue, though I may eventually attempt the downgrade out of desperation if I cannot find a solution. Note that the update I keep referencing did not including a kernel update.
I appreciate any advice or insight that you can offer.I don't have much in the way of a solution for your problem, but to start with, what were the > 30 packages? In particular, was grub/refind updated (or anything else that would likely touch your efi partition? I know from my own messing with refind, that you can potentially 'damage' your partition layout with certain commands which maybe causing osx not to boot...
Then again, the errors may have nothing to do with your arch installation and maybe indicative of a different problem all together. Normal procedure is at this point is to backup your complete disk (clone/mirror it, read up on how to do that especially with regards to the encryption systems used), and try to diagnose for any problems the mbp maybe having.
You could use an apple rescue cd (that may no longer be available with newer mbp , I have no idea..) or maybe use a different harddisk and install osx there and see if you can get everything running 'normally' thus ruling out any funky errors with the hw. check apple's recovery options if need be.
I guess you'll just have to fiddle about a bit and try to more closely determine what the actual problem is. and again, backup your stuff! -
Upgrading to lion: concern currently i am running Mac OS X 10.6.8 (10K549) with a windows dual boot (boot camp) on a imac, hardward configuration is good. my question is if i upgrade to lion will it effect my boot camp windows environment in any manner shape or form or will it stay pristine and I will be able to access it with no problem. as for the upgrade does it give you a clean install and upgrade options
any insight would be appreciated.
Also has anyone, added another partition and installed lion in their leaving the snow leopard partion intact.I would ask myself these questions first
What features am I hoping to benefit from by upgrading?
What apps do I have on OSX that I need to still fucntion? (research that they will)
Just a cautionary note - I have had problems, but only upgraded to see what was new - needed nothing, lost a lot -
Uninstall Linux and Grub dual boot from Win7 HP dm4..
uninstall Linux and Grub dual boot from Win7 HP dm4. I only have recovery disks. I just want to do a Startup Repair not a full system recovery.
When I reboot with the recovery disk there is no choice for Startup Repair.
thank you for any help.
Blue JacketHello bluecape. I understand you'd like to uninstall Grub/Linux. Is your recovery disc a Windows Recovery disc or the HP System Recovery disc?
You will need to begin by fixing the "Master Boot Record." This is where Grub is installed and what allows you to select your operating system. If you have a HP System Recovery disc the steps may be different--these steps are specifically for a Windows Recovery Disc. Try the following.
Boot the notebook with your Recovery Disc.
Select "Repair your Computer."
Select your Windows version once the dialog box populates.
Choose "Command Prompt" as your Recovery Tool.
From the command prompt type "bootrec /FixMbr" and press Enter.
Once this is finished type "exit" and press Enter.
Take the disc out and reboot the PC. It should boot straight into Windows without a boot loader prompting you.
The Linux files and partitions are still there but you can now remove those partitions from Windows. Simply format the partitions to "uninstall" Linux.
I hope this is helpful. If you have further questions just let me know. Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue. -
Error with update my windows phone 801883f error couldn't be installed
Dear Sir,
Plz Solve this Issue ASAP
error with update my windows phone 801883f error couldn't be installed
therefore, i can't update my windows phone
SalimHi,
This error code means that the specified path couldn't be found.
To fix this issue, I suggest we try following steps and try to reinstall again:
Step 1: Clean update temp files:
1. Press Windows key + R, type service.msc and press enter.
2. Stop Windows update service.
3. Run following command lines one by one to clear update temp files:
cd %windir%
ren SoftwareDistribution SDTemp
exit
4. Restart Windows update service.
Step 2: Clear windows store catch:
Press the Windows + R keys on your keyboard to open the Run dialog.
Type WSReset.exe, and click/tap on OK.
The Store will now open, and state the following: The cache for the store was cleared. You can now browse the store for apps
Then, please try to update Windows 8.1 again.
Regards,
Kate Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Any issues with PE7 and Windows 7?
Hi All,
I am considering purchasing a second computer. I have had great success with PE7 and Vista, But I can't get Vista on the new Alienware I want to buy. So, has anyone had any issues with PE7 and Windows 7? I have read many posts where there are issues with PE8 and Windows7.
Thanks, StanIt's a toshiba laptop.
4 gig DDR3
core duo
320 hard drive - partitioned
I also use a dual screen - 22" lcd monitor
I don't use it a lot, since I have a desktop. I've noticed having a
dedicated video card makes a world of difference in editing. This might be
your problem; a dedicated high end video card is the way to go.
If I do simple compilations I don't have any problems. I usaully am making
a DVD of soccer games. If there is a lot of special effects I'll use my
desktop that has XP. -
Problem with touchpad and Windows 8.1. Acer Aspire E5-511
I bought an Acer Aspire E5-511, but I have problem with touchpad and Windows 8.1.The touchpad (Synaptics) is not working with Windows 8.1 x64, but it works fine with Windows 7 x64 and Windows 8 x64.When I install Windows 8.1 and have to choose” language to install” I can’t choose anything with the touchpad. I should plug in my mouse to continue. I doesn’t work even when it’s fully installed and with latest driver (available only for win 8.1 x64) from Acer’s website. I tried with an older driver, but had no success. I updated BIOS, but it doesn’t work again. In hardware IDS in device manager it shows HID\… not ACPI\… (like win 7/8). Fn+F7 doesn’t help.When I try to install Windows7/8 the touchpad is working properly at the beginning (I can choose ”language to install”, “Time and currency format”… and the touchpad works after install even without driver).
SOLUTION So guys after deep research and troubleshooting I found that you need to keep notice of a few things at time of installation: Installation Mode: UEFI (only)- LEGACY would create touchpad issues. after installation of windows just follow the driver installation hierarchy 1.Intel NB_Chipset_M Baytrail-M 2.Intel I/O Driver then rest of the crap. Note:After doing all this make sure your touchpad is active >> Fn+F7 Just wished if this solution came from an acer executive , the world would have been a better place , but anyways this is what community is for. Enjoy everyone
-
External Hard Drive Compatible with Mac and Windows?
So my old laptop is a Dell Latitude and I bought a Western Digital external hard drive and put all my files/pics/music on it. The information the WD came with said its compatible with Mac and Windows, but when I plug it into my brand spankin new Macbook, it doesn't register with the computer and won't show up. What's going on?
Message was edited by: philliesphanI recently ran into that problem. In order to have the hard drive compatible for both PC and Mac it must be in a FAT32 format. In order to do this though all your files will be deleted (in order to reformat). You can do this by plugging in the hard drive into you mac and going under disk utility and there you will find your hard drive and under erase change the format to FAT32 and then you press erase (all will be deleted off the external drive though)
-
Cannot convert webpages to pdf using Acrobat X Pro with IE9 and Windows 7, worked fine until a few months and updates ago
I tried your suggestion, not knowing that the direct pdf printer would also "save as" PDF, but when I try your suggestion and use the Adobe PDF printer that is a direct creation of the PDF from the browser (IE9), instead of the "black out" areas I get when I use the "Convert to" button, I get missing blocks of the resulting PDF, and only get the first 1/4 to 1/3 of the webpage.
Just to clarify, when I said I print the webpage and then scan, that is a work around I have to do if I need a scanned version of the way a webpage appears on a particular date and time, instead of the one step process I used to be able to do when Adobe Acrobat would actually convert the webpage to a pdf without blackout areas or, if I try your suggestion, blank spots with a partial webpage. But the idea was one I had not thought of and I appreciated the thought.
Yes, Acrobat was updated, and is updated, and was working fine until a few months ago, Win 7 and Office 32 bit versions, Office 2010 -
VNC tool compatibility with WinCE and Windows Embedded Compact 2013 operating systems
What are all the VNC tools that are compatible with WinCE and Windows Embedded Compact 2013 operating systems or are there any RDP solutions available?
I am looking for a common VNC tool which is compatible on both the operating systems?This forum is for POSREady. Please try one of the Windows CE forums:
http://social.msdn.microsoft.com/Forums/en-US/category/windowsembeddedcompact
Sean Liming - Book Author: Starter Guide SIM (WEI), Pro Guide to WE8S & WES 7, Pro Guide to POS for .NET - www.annabooks.com / www.seanliming.com -
Project Server 2010 compatibility with IE11 and Windows 8.1
Hi All!
Maybe a silly question since compatibility is always asked about older versions, but here is my question:
Is Project Server 2010 compatible with IE11 and Windows 8.1?
I personnaly tested with IE11 and it seems to be ok. All views and pages can be opened with IE11.
But what about windows 8.1?
Has Microsoft done any communication about this?
Thanks in advance for your helps.
Guillaume.
Guillaume Rouyre - MBA, MCP, MCTSI am seeing a minor issue with the timesheet grid after users are upgraded from IE8 to IE11.
We are using Project Server 2010 with SP1 and Oct 2013 CU.
When some users (using IE11) switches between filters or views in the Timesheet page, the grid shrinks making to content un readable. The only way to get it back is to refresh the page. After a refresh, the grid returns to normal size, but the pane
divider is too far to the left and always must be dragged to the right in order to see the task names in the left grid.
Maybe you are looking for
-
Problem with valueUnbound() in 5.1 SP12
We are facing a problem with WLServer 5.1 SP12 when the session gets invalidated. Please find the problem description below. References: 1.) SessionListener Class : A class that implements HttpSessionBindingListener 2.) Login JSP : A JSP which adds t
-
Is Adobe Reader really this bad?
Hi, I've been working on a PDF for a while now, but I have found Adobe Reader to be completely useless. In fact it has hindered my progress greatly. I have to ask if anyone else has found this or if for whatever reason I have just been cursed with th
-
I have been using iTunes for years to connect to the radio and just recently tried to tune in and an error sign pops up stating " A error occurred while contracting the radio tunning service. Check your internet connection or try again later." There'
-
Having trouble turning it on or even charging it.
-
Detect uncommitted yet posted data in my forms session?
In our application it is common practice to use the Forms POST built-in. Since we have our own exit-function with the application-wide look and feel we would like to catch the alert-box asking whether to save any changes. Is there a way to either ada