Error with update CS5 after new installation (new Computer)

Good Morning i whant to update the CS5 Programms
but ervery time i try, an error epears (error in downloading)

manually update,: http://www.adobe.com/downloads/updates/

Similar Messages

Is there compatibility problem with updating OS-X Lion to new Mountain Lion?

is there compatibility problem with updating OS-X Lion to new Mountain Lion?

http://www.apple.com/osx/specs/

Hi guy! I have been using iPhone since 2010 but now I'm facing problem with hardware still after i reclaim new iPhone some times my phone just completely blackout!! any idea??

hi guy! I have been using iPhone since 2010 but now I'm facing problem with hardware still after i reclaim new iPhone some times my phone just completely blackout!! any idea??

If there is a problem with your AppleID, you - and not the provider - must
straighten out the matter.
AppleID disabled:
http://support.apple.com/kb/TS2446
http://www.apple.com/support/itunes/contact/
https://getsupport.apple.com/Issues.action

I was updating ipod touch to new iOS5 and it told me that all data would be lost with update and to put it oon computer, but update not there. How do i update with out this happening?

I am looking for some help with updating to iOS5, i downloaded to computer to avoid losing data on ipod touch but update was not there. I've done three times and same result. If I have all music on usb drive will I be able to reupload it after update, or is there another way to do it by transferring my music from ipod touch to computer and the re-installing in itunes. Alot of the music I have is copied off of discs and not from itune purchases. Any help will be greatly appreciated and my computer skills are satisfactory but I am by no means a computer guru. Thanks

As all of the msuic came from your computer in the first place it should still be there. Is it not?
EVERYTHING on your ipod should also be on your computer and should be included in your regular backup copy of your computer.
Make sure that everything is on your computer. You can transfer itunes purchases from the ipod. Without syncing: File>Transfer Purchases.
When everything is on your computer, then it can be synced back to the ipod after updating.

Error with update my windows phone 801883f error couldn't be installed

Dear Sir,
Plz Solve this Issue ASAP
error with update my windows phone 801883f error couldn't be installed
therefore, i can't update my windows phone
Salim

Hi,
This error code means that the specified path couldn't be found.
To fix this issue, I suggest we try following steps and try to reinstall again:
Step 1: Clean update temp files:
1. Press Windows key + R, type service.msc and press enter.
2. Stop Windows update service.
3. Run following command lines one by one to clear update temp files:
cd %windir%
ren SoftwareDistribution SDTemp
exit
4. Restart Windows update service.
Step 2: Clear windows store catch:
Press the Windows + R keys on your keyboard to open the Run dialog.
Type WSReset.exe, and click/tap on OK.
The Store will now open, and state the following: The cache for the store was cleared. You can now browse the store for apps
Then, please try to update Windows 8.1 again.
Regards,
Kate Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Has anyone had trouble with photo albums after downloading a newer version of iPhoto?

Has anyone had trouble with photo albums and viewing photos after downloading a newer version of iPhoto?

I downloaded mountain lion and then iPhoto '11 in order to tap into iCloud capabilities with all of my devices. (My Mac was outdated in regards to operating platform to do this). After installing iPhoto 11, I had to repair and rebuild my library of photos. However, after doing this, all of my albums were jumbled and, while I can see the image thumbnail, when I click on the thumbnail, and error that looks like a black triangle and gray exclamation pops up as opposed to the larger hi def image I want to view.

Software Update Issue-After Leopard Installation

I installed Leopard yesterday and ran the first software update; everything worked OK; the first software updated included three updates: Remote Desktop Client update; iDVD update and Garageband update.
Today I tried to run another update and had this issue: while the Software Update is displaying a message saying "New software is available for your computer" there is nothing listed below and the install button is disabled! Then I went to the Software Update Preference and saw a message there saying Last Attempt Failed; error occurred while checking
Does anyone have the same issue while trying a new software update after Leopard installation?
I do understand there is another new update issued yesterday by Apple regarding login key
Grateful for any insight re this problem

Hi. I had the same problem after doing an erase and install of Leopard yesterday. When I go into Terminal (actually iTerm) and type "softwareupdate -l" (to list all updates), I see:
XML parser error:
Encountered unexpected EOF
Old-style plist parser error:
Malformed data byte group at line 1; invalid hex
This appears to be a problem with com.apple.SoftwareUpdate.plist, the property list for Software Update, but I'm not sure. If I type "find ~/Library/ -name '*plist' -exec plutil {} \;" to check all the plists, however, the Software Update plist checks out as OK. Furthermore, deleting that property list and rebooting to force the OS to create a new plist does not fix the problem. Weird. Now, if I type "sudo softwareupdate -i -a" to install all updates (change "-a" to "-r" to only install recommended updates), it works fine. I still get that same error when I try to run Software Update normally afterwards, but if I go to the preferences, all of the updates are listed under Installed Updates. So, I can get the OS to update automatically, but only through the Terminal. This is very weird, and I hope someone can shed more light on this situation.
Message was edited by: timocrates

Error with Sound Blaster Audigy 2 installation...driv

Hi
I am really stuck with this issue and was wondering if someone out there could help. I have an Audigy 2, and have had it working for a long period of time. I had to re install Windows not so long ago and since then I have found a number of errors with my sound.
Firstly there are a lot of pops and clicks when either gaming or playing audio files. Admittedly the pops and clicks happen a lot more when gaming (multiple sounds playing at once ?).
Therefore I decided to come onto creatives site and download the new drivers for my sound card. I was still running the original drivers from the CD supplied, so felt it was about time.
I downloaded the file SBA2_PCWDRV_LB__84_55-R, which is the correct update for my card and tried to install it.
It comes up with a message:
Setup could not detect and Sound Blaster Audigy 2 on you system.
Please ensure that your sound blaster hardware is properly installed before running this setup program.
setup will not exit
After that message i was a little confused, because as far as I was concerned everything was working ok, sound was coming out and was coming out correctly from my 5. surround system.
So i double clicked on the Creative Volume Control to check everything was on.
I'm not sure if this is an error but a long the top where you select the output device mine says:
SB Audigy [A000]
I'm not 00% sure but I don't think it said that before, I think it said something else, but I could be wrong.
I decided to uninstall my sound card and re-install. Everything installed absolutely fine from the CD, recognised the card and no complaints.
So I tried to re-install the driver update, and same message. (And the output device is still SB Audigy [A000].
Again I uninstalled and tried the Beta patch on the off chance that that would work, still nothing, it does not recognise the card in my computer.
I definately have an Audigy 2 and it has worked properly allowing me to update it before.
Sorry to have such a long message, but I am really confused about all of this and would really like to get everything working properly.
Any advice and help would be appreciated.
Thanks

fedepolito,
I assume that you are running WinXP with Service Pack 3. Did you do a clean sweep of all the Creative Software and reinstall from the A2ZS CD? Do you get sound then?
Me disculpo que no entend?a que todo que usted dijo en su poste. Asumo que usted est? funcionando Windows XP con el Service Pack 3. ?Usted hizo un retiro del barrido limpio de todo el Creative software? (Busque los foros para el "clean sweep." ) ?Despu?s de eso, cuando usted reinstala del CD de Audigy 2 ZS, usted consigue el sonido?
Message Edited by Katman on 03-29-2009 2:59 [email protected]

Getting error while applyin patch after R12 installation

I applying patch 8940108 after R12 installation. Pls. suggest what needs to be done.
Patch 8940108: Optional component(s) missing : [ oracle.precomp.lang, 11.1.0.7.0 ]
Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
The details are:
Patch 7708340:
Archive Action: Source file "/db01/opt/oracle/product/11.1.0_egebrt/.patch_storage/7708340_Jan_28_2009_11_33_00/files/lib/libpls11.a/pkv.o" does not exist.
'oracle.rdbms, 11.1.0.7.0': Cannot update file '/db01/opt/oracle/product/11.1.0_egebrt/lib/libpls11.a' with '/pkv.o'
Archive Action: Source file "/db01/opt/oracle/product/11.1.0_egebrt/.patch_storage/7708340_Jan_28_2009_11_33_00/files/lib/libpls11.a/pkv.o" does not exist.
'oracle.rdbms.rman, 11.1.0.7.0': Cannot update file '/db01/opt/oracle/product/11.1.0_egebrt/lib/libpls11.a' with '/pkv.o'
ApplySession failed during prerequisite checks: Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
System intact, OPatch will not attempt to restore the system
The following warnings have occurred during OPatch execution:
1) OUI-67078:Interim patch 8940108 is a superset of the patch(es) [ 7708340 ] in OH /db01/opt/oracle/product/11.1.0_egebrt
OPatch failed with error code 74

Hi;
The following warnings have occurred during OPatch execution:
1) OUI-67078:Interim patch 8940108 is a superset of the patch(es) [ 7708340 ] in OH /db01/opt/oracle/product/11.1.0_egebrt
Its mean if you have patch 8940108 on your system already and if you try to apply patch 7708340 than you dont need to apply patch 7708340,coz patch 8940108 already cover patch 7708340.
You can try this
opatch -lsinventory|grep 8940108
Regard
Helios

Error connecting to CMS after fresh installation

I finish installing XI 3.0 on our Window 2003 server, Tomcat is installed. When I try to login to CMS I got the following error message:"Error: Server servername:6400 not found or server may be down (FWM 01003) null". I have tried the Administrator and blank password and my CMS DB owner password.
When I install XI 3.0 I have left the password blank. This is the second time I install XI 3.0 on this server. I have uninstalled my 1st XI 3.0 and than reinstall it for the second time. Not sure if this is related for my first install I have set a Administrator password. I am not sure if it is cached something in the system. However I did try to login to CMS with my 1st install password but still unable to login.
I have checked CCM that Tomcat and SIA is both running and I able to bring up the CMS webpage. I did research on the forum that there is a table mod I can do to reset the Administrator password. Can someone post these instructions?
One More thing is when I install Tomcat I changed the port number:
8080 -> 7080
8005 -> 7005
8443 -> 7443
Thank you
Edited by: Alan Mui on Sep 26, 2008 12:26 AM

Hi,
If this is a new installation - without any data - open your CCM and stop SIA. Double Click SIA, select configuration and tick under CMS System Database Configuration on "Specify". Select "Recreate the current datasource". This option will re-initialize the current data source and all data present will be lost. The Administrator password will be reset to deafult.
I hope this helps,
Regards,
Tim

Why can't I install VS 2013 with update 4 after acquiring successfully?

I downloaded VS 2013 with update 4 source (iso file) in VisualStudio.com
After extracting, I ran this command: vs2013.4.exe /layout
It worked and displayed the result.
Setup completed! All specified components have been acquired successfully.
A folder was created in C:\Users\...\Documents\Update 4
But, when I right clicked file vs2013.4.exe in that folder, cliked Run as Administrator. It didn't work.
An error was found:
Update 4 does not apply or is blocked by another condition on your computer
I tried to delete all files in C:\Users\...\AppData\Local\Temp and reinstalled it.
But, the result was the same.
I'm using Windows 8.1 64bit and install all Windows update. It includes KB2883200.
Can you tell me how to install it?
Many thanks!

Hi ntnguyen.victory,
According to the name of the installer "vs2013.4.exe", I think what you download is the update 4 for VS2013 instead of VS2013 with update 4.
You can check the update 4 download page:https://www.microsoft.com/en-us/download/details.aspx?id=44921
and the VS2013 with update 4 download page:http://www.visualstudio.com/downloads/download-visual-studio-vs
So when you right clicked file vs2013.4.exe in that folder, cliked Run as Administrator, it didn't work because you didn't install VS2013.
Please download VS2013 with update 4 with the link I paste.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

.PSD File incompatible with Photoshop CS5 after working on it in CS5 for hours

Hi. Sorry If I've posted in the wrong area, but I'm a little flustered and I have not a clue of where to put this. Couldn't find anything related to troubleshooting.
I was working on an Illustration in Photoshop CS5 yesterday; it was a trial version. After hours of work and saving regularly (yes, I'm POSITIVE I saved as a .PSD and did not add any extensions) I decided to get to bed. I woke up today, fired up the CPU, and I'm getting this message every time I try to open this file in either photoshop or windows image viewer;
Adobe Photoshop CS5 extended
Could not complete your request because the file is not compatible with this version of Photoshop.
The computer had been restarted after I had saved last night before I went to bed, and it opened the file just fine. All the other .PSD files from yesterday that I've saved are able to open without a problem.
I only used the brush tool and eraser tool to create the illustrations I worked on yesterday.
I've updated Photoshop CS5 to 12.0.4 after I found this problem. It didn't solve it.
I have not downloaded or installed any files to this CPU since I started work on the illustrations.
I'm running windows 7 64 bit
2.0 GB of Ram
AMD Athlon 64x2 Dual-Core Processor TK-55 1.8 GHz
If anyone needs any information regarding the CPU I'll be more than happy to get them for you; I'm sorry that I don't have all my specs, I'm not very good with computers. I'm sure that If you need something I can fish it out for you. I realize everyone has deadlines to work around; I've tried to get you as much information as possible. Thank you for your time in advance.

Could be a problem with your disk, a problem with the OS, or it could be the wrong file extension on the file.
How large is this file? If I could take a look at the file, I could probably narrow down the causes.

I am having problem with updates CS5

Hi,
I am having problems with updating my CS5. I keep getting an error message "There was an error downloading this update. Please quit and try again later"
Can you please help?
Thank you
Eli B

See if doing it manually works
All updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/

Okay Error with program not having valid installation.

Okay so whenever I try to open iTunes a message pops up saying "This action is only valid for products currently installed. So when I go to the uninstall/change a program it provides me with another error or problem. That the installation source for this product is not available.
I also have another problem I own an iPod touch and I got the plug your iPod into iTunes symbol and when I tried doing that it started the first problem... are they related?

Okay so whenever I try to open iTunes a message pops up saying "This action is only valid for products currently installed. So when I go to the uninstall/change a program it provides me with another error or problem. That the installation source for this product is not available.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install CleanUp"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC and reinstall iTunes. Does it go through properly this time?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

AppHangB1 error with Illustrator CS5

Hello, I'm currently still using CS5 and considering upgrading to the latest CC version. With my CS5 Illustrator I'm having an AppHangB1 error that is preventing me from launching the program. I'm concerned that if I upgrade the software I'll still have this issue. If anyone knows anything about this error code please let me know. I need to get back and running but don't want to waste time and money.
Thanks,
Will

Will,
If no one comes up with anything brighter, you may try the list.
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Error with update CS5 after new installation (new Computer)

Similar Messages

Maybe you are looking for