Error with VF02-header-output fails

Hi all
Vf02 is giving some errors, when you try to print the invoice via header-output
it complains that it failed to process
and when i try to get the detailed log
it says can not load the graphics!!
i checked se78 to find out the graphics but could not succeed much
this sis a smartform i think
can you please give some advise?

hi sai
how can you check whether the graphic fits in smartforms?
i have not done smartforms before
please let me know

Similar Messages

Running a report with large data output, fails with error.

Hi,
We have a report that contains a logo (size 60kb) and we have 1000 records that need to be printed and the logo needs to be printed for each record. We are successful in printing 100 records at present.
While trying to print 1000 records, we are getting an Internal Server Error. What could be the reason? & How do can we overcome this problem?
We are using Oracle Reports 10g Release 2.
Thanks & Regards,
Sairam SP

May be below is the correct forum to place the question.
Reports
Cheers
Sarma.

Error with XML data output

The Employee W2 XML Interface finished with Warning. In the output there's partial data and at the with the following error:
<SS_WITHHELD>3403.15</SS_WITHHELD
&gThe XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Only one top level element is allowed in an XML document. Error processing resource 'http://cvlx12.vancouver.center:8002/OA...
<W2REGISTER>
-^
t;
<MED_WAGES>54889.55</MED_WAGES>
<MED_WITHHELD>795.9</MED_WITHHELD>
Also the concurrent request log file shows:
Beginning post-processing of request 3877215 on node CVLX12 at 16-NOV-2010 11:54:50.
Post-processing of request 3877215 failed at 16-NOV-2010 11:54:50 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
But the Output Post Processor is up running. If I go to the server I will be able to see the output just created ok. Anyone know what's wrong? Thanks

Thanks for your response. I have ftp the file from server and it looks good. But When I ran XML Report Publish against this request, it was error out, message:
Process template
--XDOException
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:570)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:235)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:182)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1665)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:975)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5936)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
     at oracle.apps.xdo.oa.cp.JCP4XMLPublisher.runProgram(JCP4XMLPublisher.java:684)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
Caused by: org.xml.sax.SAXParseException: <Line 268, Column 6>: XML-20109: (Fatal Error) PI with the name 'xml' can occur only in the beginning of the document.
     at oracle.xdo.parser.v2.XMLError.flushErrorHandler(XMLError.java:441)
     at oracle.xdo.parser.v2.XMLError.flushErrors1(XMLError.java:303)
     at oracle.xdo.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:305)
     at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:289)
     ... 17 more
I have registered Employee W2 XML Interface with XML Publisher with Oracle seeded template. Thanks,

Issues while generating the output(using VF02- header- output)

Hi Group,
I have issues while generating output using the tcode VF02.
the issue is that, I have got an output type which is configured for the medium "Special Function" and the o/p program generates PDF depending on certain criteria.
now, when I try to "repeat output" option to generate output again, I was getting errors. it works sometimes by choosing the option "Successfully processed" then selecting the record and then saving it. if I do the same thing again, the output make be running into error or success, it is varying everytime.
I am not able to understand why the process is not working correctly, when doing the "Repeat output" option on the "Successfully processed" record, the system is giving error instead of a Successful message. it is succeeding once and sometimes not.
Kindly let me know your inputs if you have encountered same kind of issue.
Regards,
Vishnu.

hi Group,
when I checked the configuration part of the o/p type I am currently processing, I could see that, in customizing part of this o/p type, there was a checkbox for Multiple Issuing - which is not checked.
when it is not checked, it should not be possible to run the o/ps for multiple times, but when I tried to generate o/ps again and again, in a few attempts I could to generate the PDFs and in some cases not. I don't know why there is no relevance for this check box Multiple Issuing.
Could you please let me know why this issuing of o/p is working in some occassions and not working work sometimes, which is having the configuration of checkbox Multiple Issuing - not being checked.
thanks for your help in advance.
Regards,
Vishnu.

Terrible error with kerberos, win2003 - Checksum failed!

Now i'm trying to use CAS SSO with kerberos for authentication.
I done all settings by instruction, see this tutorial http://www.ja-sig.org/wiki/display/CASUM/SPNEGO.
So, the error is: Failure unspecified at GSS-API level (Mechanism level: Checksum failed).
I guess, there is a problem with encryption type, but i don't know how to resolve it. Please help
My stacktrace shown below:
Caused by: GSSException: Failure unspecified at GSS-API level (Mechanism level:
Checksum failed)
        at sun.security.jgss.krb5.Krb5Context.acceptSecContext(Krb5Context.java:
741)
        at sun.security.jgss.GSSContextImpl.acceptSecContext(GSSContextImpl.java
:323)
        at sun.security.jgss.GSSContextImpl.acceptSecContext(GSSContextImpl.java
:267)
        ... 75 more
Caused by: KrbException: Checksum failed
        at sun.security.krb5.internal.crypto.ArcFourHmacEType.decrypt(ArcFourHma
cEType.java:85)
        at sun.security.krb5.internal.crypto.ArcFourHmacEType.decrypt(ArcFourHma
cEType.java:77)
        at sun.security.krb5.EncryptedData.decrypt(EncryptedData.java:168)
        at sun.security.krb5.KrbApReq.authenticate(KrbApReq.java:267)
        at sun.security.krb5.KrbApReq.<init>(KrbApReq.java:134)
        at sun.security.jgss.krb5.InitSecContextToken.<init>(InitSecContextToken
.java:79)
        at sun.security.jgss.krb5.Krb5Context.acceptSecContext(Krb5Context.java:
724)
        ... 77 more
Caused by: java.security.GeneralSecurityException: Checksum failed
        at sun.security.krb5.internal.crypto.dk.ArcFourCrypto.decrypt(ArcFourCry
pto.java:388)
        at sun.security.krb5.internal.crypto.ArcFourHmac.decrypt(ArcFourHmac.jav
a:74)
        at sun.security.krb5.internal.crypto.ArcFourHmacEType.decrypt(ArcFourHma
cEType.java:83)
        ... 83 more

Thank you for advice, my friend.
I have analyzed info in TGS-REQ request, but i could not find any SPN in it.
Please see this screenshot and say me: where is needed SPN in ticket?
Here is my full configuration:
[logging]
[libdefaults]
ticket_lifetime = 24000
default_realm = MYCORP.KUBA
dns_lookup_kdc = true
dns_lookup_realm = true
default_tkt_enctypes = rc4-hmac des3-hmac-sha1 des-cbc-crc
default_tgs_enctypes = rc4-hmac des3-hmac-sha1 des-cbc-crc
[realms]
MYCORP.KUBA = {
kdc = mycorp.kuba:88
admin_server = mycorp.kuba:749
default_domain = mycorp.kuba
[domain_realm]
.mycorp.kuba = MYCORP.KUBA
mycorp.kuba = MYCORP.KUBA
[domain_realm]
.mycorp.kuba = MYCORP.KUBA
[appdefaults]
autologin = true
forward = true
forwardable = true
encrypt = true
<bean class="org.jasig.cas.support.spnego.authentication.handler.support.JCIFSConfig"
          p:jcifsDomainController="xxx"
          p:jcifsNetbiosWins="xxx"
          p:jcifsServicePrincipal="HTTP/MYUSER.mycorp.kuba"
          p:jcifsServicePassword="secret"
          p:useSubjectCredsOnly="true"
          p:kerberosDebug="true"
          p:kerberosRealm="MYCORP.KUBA"
          p:kerberosKdc="xxx"
          p:kerberosConf="c:/winnt/krb5.conf"
          p:loginConf="C:/mypath/WEB-INF/login.conf"
     />
jcifs.spnego.initiate {
   com.sun.security.auth.module.Krb5LoginModule
   required
   debug=true
   realm="MYCORP.KUBA"
   principal="HTTP/MYUSER.mycorp.kuba"
   storeKey=true
   doNotPrompt=false
   client=true
   refreshKrb5Config=true
   storePass=true
   isInitiator=false
   useKeyTab=true
   useTicketCache=false
   keyTab="c:\a.keytab"
jcifs.spnego.accept {
   com.sun.security.auth.module.Krb5LoginModule
   required
   debug=true
   realm="MYCORP.KUBA"
   principal="HTTP/MYUSER.mycorp.kuba"
   storeKey=true
   doNotPrompt=false
   client=true
   refreshKrb5Config=true
   storePass=true
   isInitiator=false
   useKeyTab=true
   useTicketCache=false
   keyTab="c:\a.keytab"
setspn -A HTTP/MYUSER.mycorp.kuba myuser
ktpass -out a.keytab -princ HTTP/[email protected] -pass secret -mapuser [email protected] -ptype krb5_nt_principal -crypto RC4-HMAC-NTWhat is wrong with it? Please correct it if you can?

Notification Center error with "apsd: MIG demux failed"

This error is flooding:
1/16/13 11:12:41.029 PM apsd[33669]: MIG demux failed. This message ID is invalid: 0x72fd8
killing apsd doesn't help.
I cannot open Notification Center by the icon on the menu bar, while two-finger gesture can. But I cannot close that, and cmd+tab, space switching, dock don't work, until "killall -HUP Dock". Well, the error message is still there.
I'm running OS X 10.8.3 (12D50)

I don't know if problems in beta version should be posted here...

Preverification failed with error code 1. BUILD FAILED

Hallo Oracle,
Am learning my first J2me application and when i build it am getting this error. can some one help me understand what it means
Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
Copying 1957 files to C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified
Preverifying 1957 file(s) into C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified directory.
Error preverifying class com.sun.activation.registries.MailcapFile
    VERIFIER ERROR com/sun/activation/registries/MailcapFile
.<init>(Ljava/lang/String;)V:
Cannot find class java/util/Map
C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\nbproject\build-impl.xml:431: Preverification failed with error code 1.
BUILD FAILED (total time: 25 seconds)
this is the contents of build-impx.xml
<?xml version="1.0" encoding="UTF-8"?>

<project name="watsdownapp-impl" default="jar" basedir="..">
    
    <target name="pre-load-properties">
        <property file="nbproject/private/private.properties"/>
        <property name="user.properties.file" location="${netbeans.user}/build.properties"/>
        <available property="user.properties.file.exists" file="${user.properties.file}"/>
    </target>
    <target name="exists.config.active" unless="config.active">
        <echo level="warning" message="Active configuration (config.active property) is not set - using default."/>
        <property value="" name="config.active"/>
    </target>
    <target name="exists.netbeans.user" unless="netbeans.user">
        <echo level="warning" message="NetBeans IDE user directory (netbeans.user property) is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: ant-ext library home, ...). You could also open this project in the NetBeans IDE - in this case this property would be set automatically."/>
    </target>
    <target name="exists.user.properties.file" unless="user.properties.file.exists">
        <echo level="warning" message="User properties file (user.properties.file) property is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: libraries, platforms, ...)."/>
    </target>
    <target name="load-properties" depends="pre-load-properties,exists.config.active,exists.netbeans.user,exists.user.properties.file">
        <loadproperties srcfile="nbproject/project.properties">
            <filterchain>
                <containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
                <concatfilter prepend="nbproject/project.properties"/>
                <containsregex pattern="^platform.active=|^deployment.method=|^deployment.instance="/>
            </filterchain>
        </loadproperties>
        <property name="deployment.instance" value="default"/>
        <loadproperties srcfile="${user.properties.file}">
            <filterchain>
                <replaceregex pattern="^platforms\.${platform.active}\." replace="platform."/>
                <replaceregex pattern="^deployment\.${deployment.method}\.scriptfile=" replace="deployment.scriptfile="/>
                <replaceregex pattern="^deployments\.${deployment.method}\.${deployment.instance}\.([^=]+)=" replace="\1="/>
            </filterchain>
        </loadproperties>
        <loadproperties srcfile="nbproject/project.properties">
            <filterchain>
                <containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
                <concatfilter prepend="nbproject/project.properties"/>
            </filterchain>
        </loadproperties>
    </target>
    
    <target name="exists.platform.active" unless="platform.active">
        <echo level="warning" message="Active platform (platform.active property) in not set. If you set this and user.properties.file property, many properties required by the project will be automatically evaluated (e.g.: platform home, platform classpath, ...)."/>
    </target>
    <target name="exists.platform.configuration" unless="platform.configuration">
        <echo level="warning" message="Platform configuration (platform.configuration) is not set. Using default (CLDC-1.0) configuration."/>
        <property name="platform.configuration" value="CLDC-1.0"/>
    </target>
    <target name="exists.platform.profile" unless="platform.profile">
        <echo level="warning" message="Platform profile (platform.profile) is not set. Using default (MIDP-1.0) profile."/>
        <property name="platform.profile" value="MIDP-1.0"/>
    </target>
    <target name="basic-init" depends="exists.platform.active,exists.platform.configuration,exists.platform.profile">
        <fail unless="libs.j2me_ant_ext.classpath">Classpath to J2ME Ant extension library (libs.j2me_ant_ext.classpath property) is not set. For example: location of mobility/modules/org-netbeans-mobility-antext.jar file in the IDE installation directory.</fail>
        <fail unless="platform.home">Platform home (platform.home property) is not set. Value of this property should be ${platform.active.description} emulator home directory location.</fail>
        <fail unless="platform.bootclasspath">Platform boot classpath (platform.bootclasspath property) is not set. Value of this property should be ${platform.active.description} emulator boot classpath containing all J2ME classes provided by emulator.</fail>
        <fail unless="src.dir">Must set src.dir</fail>
        <fail unless="build.dir">Must set build.dir</fail>
        <fail unless="dist.dir">Must set dist.dir</fail>
        <fail unless="dist.jar">Must set dist.jar</fail>
        <property name="javac.source" value="1.3"/>
        <property name="javac.target" value="1.1"/>
        <property name="javac.encoding" value="${file.encoding}"/>
        <property name="deployment.number" value="0.0.1"/>
        <property name="deployment.counter" value="000002"/>
        <condition property="no.deps">
            <istrue value="${no.dependencies}"/>
        </condition>
        <condition property="no.preprocess">
            <isfalse value="${use.preprocessor}"/>
        </condition>
        <condition property="no.javadoc.preview">
            <isfalse value="${javadoc.preview}"/>
        </condition>
        <condition property="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes},**/*Test.java,**/test,**/test/**">
            <istrue value="${filter.exclude.tests}"/>
        </condition>
        <property name="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes}"/>
        <condition property="deployment.do.override.jarurl" value="">
            <istrue value="${deployment.override.jarurl}"/>
        </condition>
        <condition property="config.active.name" value="DefaultConfiguration">
            <length string="${config.active}" trim="true" length="0"/>
        </condition>
        <property name="config.active.name" value="${config.active}"/>
        <taskdef resource="org/netbeans/mobility/antext/defs.properties">
            <classpath>
                <pathelement path="${libs.j2me_ant_ext.classpath}"/>
            </classpath>
        </taskdef>
        <condition property="skip.deployment">
            <equals arg1="${deployment.method}" arg2="NONE" casesensitive="false" trim="true"/>
        </condition>
        <condition property="app-version.autoincrement.trigger">
            <istrue value="${app-version.autoincrement}"/>
        </condition>
        <condition property="debug.timeout" value="30000">
            <or>
                <equals arg1="${debugger.timeout}" arg2="" trim="true"/>
                <not>
                    <isset property="debugger.timeout"/>
                </not>
            </or>
        </condition>
        <property name="debug.timeout" value="${debugger.timeout}"/>
        <nb-overrideproperty name="buildsystem.baton" value="${src.dir}"/>
    </target>
    
    <target name="cldc-pre-init">
        <condition property="cldc-platform.trigger">
            <equals arg1="CLDC" arg2="${platform.trigger}" casesensitive="false"/>
        </condition>
    </target>
    <target name="cldc-init" depends="cldc-pre-init" if="cldc-platform.trigger">
        <property name="preverify.sources.dir" location="${build.dir}/preverifysrc"/>
        <property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
        <property name="platform.device" value=""/>
        <property name="dist.jad.url" value="file://"/>
        <property name="run.cmd.options" value=""/>
        <condition property="evaluated.run.security.domain" value="">
            <isfalse value="${run.use.security.domain}"/>
        </condition>
        <property name="evaluated.run.security.domain" value="${run.security.domain}"/>
        <condition property="override.jarurl.trigger">
            <and>
                <istrue value="${cldc-platform.trigger}"/>
                <istrue value="${deployment.override.jarurl}"/>
            </and>
        </condition>
        <property name="deployment.jad" location="${dist.dir}/${dist.jad}"/>
        <property name="deployment.jar" location="${dist.dir}/${dist.jar}"/>
        <property name="deployment.dir" location="${dist.dir}"/>
        <patternset id="deployment.patternset">
            <include name="${dist.jad}"/>
            <include name="${dist.jar}"/>
        </patternset>
    </target>
    
    <target name="cdc-init">
        <condition property="cdc-platform.trigger">
            <equals arg1="CDC" arg2="${platform.trigger}" casesensitive="false"/>
        </condition>
        <available file="${manifest.file}" property="manifest.available"/>
        <condition property="main.class.applet">
            <equals arg1="${main.class.class}" arg2="applet" casesensitive="false"/>
        </condition>
        <condition property="main.class.xlet">
            <equals arg1="${main.class.class}" arg2="xlet" casesensitive="false"/>
        </condition>
        <condition property="manifest.available+main.class+fat.jar">
            <and>
                <isset property="manifest.available"/>
                <isset property="main.class"/>
                <istrue value="${platform.fat.jar}"/>
                <not>
                    <equals arg1="${main.class}" arg2="" trim="true"/>
                </not>
            </and>
        </condition>
        <condition property="manifest.available+main.class">
            <and>
                <isset property="manifest.available"/>
                <isset property="main.class"/>
                <isfalse value="${platform.fat.jar}"/>
                <not>
                    <equals arg1="${main.class}" arg2="" trim="true"/>
                </not>
            </and>
        </condition>
        <condition property="application.version.invalid" value="true">
            <equals arg1="${deployment.number}" arg2="" trim="true"/>
        </condition>
        <fail if="application.version.invalid" message="Property deployment.number must not be empty and must contain version in format %d.%d.%d!"/>
        <condition property="sign.jar.trigger" value="true">
            <and>
                <isset property="cdc-platform.trigger"/>
                <istrue value="${sign.enabled}"/>
            </and>
        </condition>
    </target>
    
    <target name="semc-pre-init" if="cdc-platform.trigger">
        <condition property="semc-platform.trigger">
            <equals arg1="semc" arg2="${platform.type}" casesensitive="false"/>
        </condition>
    </target>
    <target name="semc-init" depends="semc-pre-init" if="semc-platform.trigger">
        <condition property="semc.icon.invalid" value="true">
            <or>
                <contains string="${semc.application.icon}" substring="$${"/>
                <equals arg1="${semc.application.icon}" arg2="" trim="true"/>
            </or>
        </condition>
        <condition property="no.certificateorkey" value="true">
            <or>
                <isset property="no.application.uid"/>
                <equals arg1="${semc.certificate.path}" arg2="" trim="true"/>
                <contains string="${semc.certificate.path}" substring="$${semc.certificate.path"/>
                <equals arg1="${semc.private.key.path}" arg2="" trim="true"/>
                <contains string="${semc.private.key.path}" substring="$${semc.private.key.path"/>
            </or>
        </condition>
        <property name="j9.dist" location="${build.dir}/j9/${semc.application.uid}.j9"/>
        <taskdef resource="org/netbeans/modules/j2me/cdc/project/defs.properties">
            <classpath>
                <pathelement path="${libs.cdc-ant-utils.classpath}"/>
            </classpath>
        </taskdef>
        <taskdef resource="org/netbeans/modules/j2me/cdc/project/semc/defs.properties">
            <classpath>
                <pathelement path="${libs.semc-ant-utils.classpath}"/>
            </classpath>
        </taskdef>
        <property name="deployment.dir" location="${dist.dir}"/>
        <patternset id="deployment.patternset">
            <include name="*.sis"/>
            <include name="*.SIS"/>
        </patternset>
    </target>
    
    <target name="savaje-pre-init" if="cdc-platform.trigger">
        <condition property="savaje-platform.trigger">
            <equals arg1="savaje" arg2="${platform.type}" casesensitive="false"/>
        </condition>
    </target>
    <target name="savaje-init" depends="savaje-pre-init" if="savaje-platform.trigger">
        <property name="savaje.application.uid" value="TBD"/>
        <condition property="savaje.bundle.base.invalid" value="true">
            <or>
                <equals arg1="${savaje.bundle.base}" arg2="" trim="true"/>
                <contains string="${savaje.bundle.base}" substring="$${savaje.bundle.base"/>
            </or>
        </condition>
        <condition property="savaje.unsupported.main" value="true">
            <or>
                <equals arg1="${main.class.applet}" arg2="true"/>
            </or>
        </condition>
        <condition property="savaje.icon.invalid" value="true">
            <or>
                <isset property="no.application.uid"/>
                <contains string="${savaje.application.icon}" substring="$${"/>
                <equals arg1="${savaje.application.icon}" arg2="" trim="true"/>
            </or>
        </condition>
        <property name="jnlp.dist" value="${build.dir}/jnlp/bundle.jnlp"/>
        <property name="deployment.dir" location="${dist.dir}"/>
        <patternset id="deployment.patternset">
            <include name="bundle.jnlp"/>
            <include name="bundle.policy"/>
            <include name="lib/*"/>
        </patternset>
    </target>
    
    <target name="sjmc-pre-init" if="cdc-platform.trigger">
        <condition property="sjmc-platform.trigger">
            <equals arg1="sjmc" arg2="${platform.type}" casesensitive="false"/>
        </condition>
    </target>
    <target name="sjmc-init" depends="sjmc-pre-init" if="sjmc-platform.trigger"/>
    
    <target name="ojec-pre-init" if="cdc-platform.trigger">
        <condition property="ojec-platform.trigger">
            <equals arg1="ojec" arg2="${platform.type}" casesensitive="false"/>
        </condition>
    </target>
    <target name="ojec-init" depends="ojec-pre-init" if="ojec-platform.trigger"/>
    
    <target name="cdc-hi-pre-init" if="cdc-platform.trigger">
        <condition property="cdc-hi-platform.trigger">
            <equals arg1="cdc-hi" arg2="${platform.type}" casesensitive="false"/>
        </condition>
    </target>
    <target name="cdc-hi-init" depends="cdc-hi-pre-init" if="cdc-hi-platform.trigger"/>
    
    <target name="nokiaS80-pre-init" if="cdc-platform.trigger">
        <condition property="nokiaS80-platform.trigger">
            <equals arg1="nokiaS80" arg2="${platform.type}" casesensitive="false"/>
        </condition>
    </target>
    <target name="nokiaS80-init" depends="nokiaS80-pre-init" if="nokiaS80-platform.trigger">
        <property name="j9.dist" location="${build.dir}/j9/NOKIA.j9"/>
        <property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
        <condition property="nokia.icon.invalid">
            <or>
                <contains string="${nokiaS80.application.icon}" substring="$${"/>
                <equals arg1="${nokiaS80.application.icon}" arg2="" trim="true"/>
            </or>
        </condition>
        <property name="deployment.dir" location="${dist.dir}"/>
        <patternset id="deployment.patternset">
            <include name="${dist.jar}"/>
        </patternset>
    </target>
    
    <target name="pre-init"/>
    <target name="post-init"/>
    <target name="init" depends="pre-init,load-properties,basic-init,cldc-init,cdc-init,semc-init,savaje-init,sjmc-init,ojec-init,cdc-hi-init,nokiaS80-init,post-init"/>
    
    <target name="conditional-clean-init">
        <uptodate property="no.clean.before.build" targetfile="${build.dir}/.timestamp">
            <srcfiles dir="nbproject">
                <include name="project.properties"/>
                <include name="build-impl.xml"/>
            </srcfiles>
        </uptodate>
    </target>
    <target name="conditional-clean" depends="init,conditional-clean-init" unless="no.clean.before.build" description="Clean project in case its meta information has changed.">
        <antcall target="do-clean" inheritall="true" inheritrefs="true"/>
    </target>
    
    <target name="deps-jar" depends="conditional-clean" unless="no.deps"/>
    
    <target name="pre-preprocess"/>
    <target name="do-preprocess" unless="no.preprocess">
        <fail unless="preprocessed.dir">Must set preprocessed.dir</fail>
        <property name="abilities" value=""/>
        <property name="debug.level" value="debug"/>
        <mkdir dir="${preprocessed.dir}"/>
        <echo message="ignore me" file="${build.dir}/.timestamp"/>
        <nb-prep destdir="${preprocessed.dir}" preprocessfor="${config.active.name},${abilities},DebugLevel=${debug.level}" encoding="${javac.encoding}">
            <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated}"/>
        </nb-prep>
        <copy todir="${preprocessed.dir}">
            <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
        </copy>
        <nb-overrideproperty name="buildsystem.baton" value="${preprocessed.dir}"/>
    </target>
    <target name="post-preprocess"/>
    <target name="preprocess" depends="deps-jar,pre-preprocess,do-preprocess,post-preprocess" description="Preprocess project sources."/>
    
    <target name="pre-compile"/>
    <target name="do-compile">
        <fail unless="build.classes.dir">Must set build.classes.dir</fail>
        <mkdir dir="${build.classes.dir}"/>
        <javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" destdir="${build.classes.dir}" srcdir="${buildsystem.baton}" bootclasspath="${platform.bootclasspath}" encoding="${javac.encoding}">
            <classpath>
                <path path="${libs.classpath}"/>
            </classpath>
        </javac>
        <copy todir="${build.classes.dir}">
            <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
        </copy>
        <nb-overrideproperty name="buildsystem.baton" value="${build.classes.dir}"/>
    </target>
    <target name="extract-libs" description="Extracts all bundled libraries.">
        <mkdir dir="${build.classes.dir}"/>
        <nb-extract dir="${build.classes.dir}" excludeManifest="true" classpath="${libs.classpath}" excludeclasspath="${extra.classpath}"/>
    </target>
    <target name="post-compile"/>
    <target name="compile" depends="preprocess,pre-compile,extract-libs,do-compile,post-compile" description="Compile project classes."/>
    
    <target name="pre-compile-single"/>
    <target name="do-compile-single">
        <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
        <mkdir dir="${build.classes.dir}"/>
        <javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" srcdir="${buildsystem.baton}" destdir="${build.classes.dir}" bootclasspath="${platform.bootclasspath}" includes="${javac.includes}" encoding="${javac.encoding}">
            <classpath>
                <path path="${libs.classpath}"/>
            </classpath>
        </javac>
    </target>
    <target name="post-compile-single"/>
    <target name="compile-single" depends="preprocess,pre-compile-single,do-compile-single,post-compile-single" description="Compile selected project classes."/>
    
    <target name="proguard-init" description="Up-to-date check before obfuscation.">
        <property name="obfuscation.level" value="0"/>
        <condition property="no.obfusc">
            <or>
                <equals arg1="${obfuscation.level}" arg2="0"/>
                <uptodate targetfile="${obfuscator.destjar}">
                    <srcfiles dir="${buildsystem.baton}"/>
                </uptodate>
            </or>
        </condition>
        <uptodate property="obfuscation.up-to-date" targetfile="${obfuscator.destjar}">
            <srcfiles dir="${buildsystem.baton}"/>
        </uptodate>
    </target>
    <target name="skip-obfuscation" depends="proguard-init" if="obfuscation.up-to-date">
        <fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
        <nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
    </target>
    <target name="proguard" depends="skip-obfuscation" description="Obfuscate project classes." unless="no.obfusc">
        <fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
        <fail unless="obfuscator.srcjar">Must set obfuscator.srcjar</fail>
        <fail unless="obfuscator.destjar">Must set obfuscator.destjar</fail>
        <property name="obfuscator.classpath" value=""/>
        <dirname file="${obfuscator.srcjar}" property="obfuscator.srcjar.dir"/>
        <dirname file="${obfuscator.destjar}" property="obfuscator.destjar.dir"/>
        <mkdir dir="${obfuscator.srcjar.dir}"/>
        <mkdir dir="${obfuscator.destjar.dir}"/>
        <jar jarfile="${obfuscator.srcjar}" basedir="${buildsystem.baton}"/>
        <property name="obfuscation.custom" value=""/>
        <nb-obfuscate srcjar="${obfuscator.srcjar}" destjar="${obfuscator.destjar}" obfuscatorclasspath="${obfuscator.classpath}" classpath="${platform.bootclasspath}:${extra.classpath}" obfuscationLevel="${obfuscation.level}" extraScript="${obfuscation.custom}"/>
        <mkdir dir="${obfuscated.classes.dir}"/>
        <unjar src="${obfuscator.destjar}" dest="${obfuscated.classes.dir}"/>
        <nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
    </target>
    
    <target name="pre-obfuscate"/>
    <target name="post-obfuscate"/>
    <target name="obfuscate" depends="compile,pre-obfuscate,proguard,post-obfuscate" description="Obfuscate project classes."/>
    
    <import file="lwuit.xml" optional="true"/>
    <target name="-lwuit-check">
        <condition property="lwuit.allowed">
            <and>
                <available file="nbproject/lwuit.xml"/>
                <isset property="is.mesdk_lwuit"/>
            </and>
        </condition>
    </target>
    <target name="-pre-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
    <target name="-lwuit-build" depends="-lwuit-check" if="lwuit.allowed">
        <antcall target="lwuit_build"/>
    </target>
    <target name="-post-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
    <target name="lwuit-build" depends="-lwuit-check,-pre-lwuit-build, -lwuit-build, -post-lwuit-build" if="lwuit.allowed"/>
    
    <target name="pre-preverify"/>
    <target name="do-preverify" if="cldc-platform.trigger">
        <fail unless="preverify.classes.dir">Must set preverify.classes.dir</fail>
        <mkdir dir="${preverify.sources.dir}"/>
        <copy todir="${preverify.sources.dir}">
            <fileset dir="${buildsystem.baton}" includes="**/*.class"/>
        </copy>
        <mkdir dir="${preverify.classes.dir}"/>
        <nb-preverify srcdir="${preverify.sources.dir}" destdir="${preverify.classes.dir}" classpath="${platform.bootclasspath}:${extra.classpath}" configuration="${platform.configuration}" platformhome="${platform.home}" platformtype="${platform.type}" commandline="${platform.preverifycommandline}"/>
        <copy todir="${preverify.classes.dir}">
            <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
        </copy>
        <nb-overrideproperty name="buildsystem.baton" value="${preverify.classes.dir}"/>
    </target>
    <target name="post-preverify"/>
    <target name="preverify" depends="obfuscate,lwuit-build,pre-preverify,do-preverify,post-preverify" description="Preverify project classes."/>
    
    <target name="set-password-init">
        <property name="sign.enabled" value="false"/>
        <condition property="skip-sign-keystore-password-input">
            <or>
                <isfalse value="${sign.enabled}"/>
                <and>
                    <isset property="sign.keystore"/>
                    <isset property="sign.keystore.password"/>
                    <not>
                        <equals arg1="${sign.keystore}" arg2="" trim="true"/>
                    </not>
                    <not>
                        <equals arg1="${sign.keystore.password}" arg2="" trim="true"/>
                    </not>
                </and>
            </or>
        </condition>
        <condition property="skip-sign-alias-password-input">
            <or>
                <isfalse value="${sign.enabled}"/>
                <and>
                    <isset property="sign.keystore"/>
                    <isset property="sign.alias"/>
                    <isset property="sign.alias.password"/>
                    <not>
                        <equals arg1="${sign.keystore}" arg2="" trim="true"/>
                    </not>
                    <not>
                        <equals arg1="${sign.alias}" arg2="" trim="true"/>
                    </not>
                    <not>
                        <equals arg1="${sign.alias.password}" arg2="" trim="true"/>
                    </not>
                </and>
            </or>
        </condition>
    </target>
    <target name="set-keystore-password" if="netbeans.home" unless="skip-sign-keystore-password-input">
        <nb-enter-password keystore="${sign.keystore}" passwordproperty="sign.keystore.password"/>
    </target>
    <target name="set-alias-password" if="netbeans.home" unless="skip-sign-alias-password-input">
        <nb-enter-password keystore="${sign.keystore}" keyalias="${sign.alias}" passwordproperty="sign.alias.password"/>
    </target>
    <target name="set-password" depends="set-password-init,set-keystore-password,set-alias-password"/>
    
    <target name="add-configuration" unless="contains.manifest.configuration">
        <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
</nb-output>
        <nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
</nb-output>
    </target>
    <target name="add-profile" unless="contains.manifest.profile">
        <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
</nb-output>
        <nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
</nb-output>
    </target>
    <target name="create-jad" if="cldc-platform.trigger">
        <fail unless="dist.jad">Must set dist.jad</fail>
        <mkdir dir="${build.dir}"/>
        <dirname file="${dist.dir}/${dist.jad}" property="dist.jad.dir"/>
        <mkdir dir="${dist.jad.dir}"/>
        <condition property="evaluated.manifest.apipermissions" value="${manifest.apipermissions}">
            <not>
                <equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
            </not>
        </condition>
        <condition property="evaluated.manifest.pushregistry" value="${manifest.pushregistry}">
            <not>
                <equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
            </not>
        </condition>
        <condition property="contains.manifest.configuration">
            <contains substring="MicroEdition-Configuration: " string="${manifest.others}"/>
        </condition>
        <condition property="contains.manifest.profile">
            <contains substring="MicroEdition-Profile: " string="${manifest.others}"/>
        </condition>
        <property value="" name="evaluated.manifest.apipermissions"/>
        <property value="" name="evaluated.manifest.pushregistry"/>
        <property name="manifest.jad" value=""/>
        <property name="manifest.manifest" value=""/>
        <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.jad}</nb-output>
        <nb-output file="${manifest.build.file}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.manifest}</nb-output>
        <antcall target="add-configuration" inheritall="true" inheritrefs="true"/>
        <antcall target="add-profile" inheritall="true" inheritrefs="true"/>
        <property name="manifest.available" value="true"/>
    </target>
    
    <target name="do-extra-libs" if="extra.classpath">
        <property name="dist.lib.dir" value="${dist.dir}/lib"/>
        <mkdir dir="${dist.lib.dir}"/>
        <copy todir="${dist.lib.dir}">
            <path path="${extra.classpath}"/>
            <flattenmapper/>
        </copy>
    </target>
    
    <target name="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger">
        <fail message="Main class is not set!">
            <condition>
                <equals arg1="${main.class}" arg2="" trim="true"/>
            </condition>
        </fail>
        <mkdir dir="${build.dir}/j9"/>
        <taskdef name="j9builder" classname="org.netbeans.modules.j2me.cdc.project.J9Builder" classpath="${libs.cdc-ant-utils.classpath}"/>
        <j9builder jvmargs="${run.jvmargs}" mainclass="${main.class}" args="${application.args}" home="${platform.home}" dist="${j9.dist}" id="NOKIA" platform="${platform.type}" xlet="${main.class.xlet}" applet="${main.class.applet}" jarname="${dist.jar}"/>
        <copy file="${manifest.file}" tofile="${manifest.build.file}" failonerror="false"/>
        <property name="manifest.available" value="true"/>
        <loadfile property="nokia.manifest.j9" srcFile="${j9.dist}"/>
    </target>
    <target name="nokiaS80-prepare-manifest" depends="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger" unless="nokia.icon.invalid">
        <pathconvert property="logo.icon.name" pathsep=" ">
            <path path="${nokiaS80.application.icon}"/>
            <chainedmapper>
                <flattenmapper/>
                <globmapper from="*" to="*"/>
            </chainedmapper>


The error says class file is missing, you can try to clean and build.

VF02- Issue while going into Menu Goto- Header - Output

Hi experts,
when i go in VF02 transaction and when i go to menu -goto
header - Output .
Then i select existing output and click on Repeat output button .
Then i select that output and click on Processing log button i get following message "No error log exists".
Can you please let me know why the error message is comming.
Thanks & regards,
Chetan

Hi Chetan,
May I know why you are creating more than one threat on the same issue?
I've replied you below on the other 2 threat:
start quote
"No processing log exists" should mean the output was generated successfully. Please let know if this is not the case.
You can give me more detail & I will see how I could be help.
Thanks.
-end quote-
Best regards,
HC.

Playback and Render Errors - communication error with child process failed

Tried a reinstall, does not fix the issue, will get the gray screen with text: communication error with child process failed
This happens during playback (About 30% of the frames or so) as well as when rendering an output.
On PC.

So I updated my nvidea drivers to the latest and greatest (GeForce 327.23). I also reinstalled SpeedGrade CC (which is quite the pain, btw! why can't we keep a local .exe file? Have to download every time you want to resintall ... even if only ten minutes apart!)
Still the issue seems to persist.
The footage is from the BlackMagic Pocket Cinema Camera. It worked fine about a month ago when I was working on some footage from the same line of cameras.
Intel Core i7-3610QM CPU @ 2.30GHz
16GB RAM
Win7 Ultimate
Geforce GTX 670M
GPU Engine Specs:
336 coresCUDA Cores
598 MHzGraphics Clock (MHz)
33.5Texture Fill Rate (billion/sec)
Memory Specs:
1500Memory Clock
GDDR5Memory Interface
192bitMemory Interface Width
72.0Memory Bandwidth (GB/sec)
Anyone have any suggestions?

How to download the output of a report along with column header

Hi,
Could someone please tell me on how to download the output of a report along with column header to .txt format. A download option needs to be given to the user using physical and logical file names .The report basically contains header details and item details and requirement is to download the same format into an .txt format.

Hello,
Try this FM:
Data: being of itab occurs 0,
matnr like mara-matnr,
maktx like makt-maktx,
end of itab.
data:begin of fld_tab occurs 0,
fld_name(20),
end of fld_tab.
fld_tab = 'Material'.
append fld_tab.
fld_tab = 'Material Desc'.
append fld_tab.
CALL FUNCTION 'WS_DOWNLOAD'
   EXPORTING
        BIN_FILESIZE            = ' '
        CODEPAGE                = ' '
         FILENAME                = 'C:\1.txt '
         FILETYPE                = 'DAT'
        MODE                    = ' '
        WK1_N_FORMAT            = ' '
        WK1_N_SIZE              = ' '
        WK1_T_FORMAT            = ' '
        WK1_T_SIZE              = ' '
        COL_SELECT              = ' '
        COL_SELECTMASK          = ' '
        NO_AUTH_CHECK           = ' '
   IMPORTING
        FILELENGTH              =
     TABLES
          DATA_TAB                = itab
          FIELDNAMES              = fld_tab
   EXCEPTIONS
        FILE_OPEN_ERROR         = 1
        FILE_WRITE_ERROR        = 2
        INVALID_FILESIZE        = 3
        INVALID_TYPE            = 4
        NO_BATCH                = 5
        UNKNOWN_ERROR           = 6
        INVALID_TABLE_WIDTH     = 7
        GUI_REFUSE_FILETRANSFER = 8
        CUSTOMER_ERROR          = 9
        OTHERS                  = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Naimesh

Ricoh Aficio MP C2051 Scan to Folder - Windows 7 64 bit Error: Authentication with the destination has failed check settings

I got an issue with OS of widows 7.
unable to scan documents to user's PC.am getting error message "Authentication with the destination has failed. Check settings. To check the current status, press [Scanned Files Status
Other Windows xp PC can do this.
How can I fix this problem?
Printer Model :C2051 /mp2001sp

Hi,
I searched for the error and it is mentioned in Ricoh's website:
Messages Displayed on the Control Panel When Using the Scanner Function
http://support.ricoh.com/bb_v1oi/pub_e/oi_view/0001045/0001045718/view/trouble/int/0036.htm
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Message
Cause
Solution
“Authentication with the destination has failed. Check settings. To check the current status, press [Comm. Status/Print].”
The entered login user name or login password is not correct.
Check that the user name and password are correct.
Check that the ID and password for the destination folder are correct.
A password of 128 or more characters may not be recognized.
From the solution, it mentioned that the issue could relate to user account or its password.
Please let me know if it is in domain environment. If so, please test to log the same user account currently on Windows 7 to Windows XP and see if issue persists.
Also please test to directly access the scanning folder on printer server to see if there is any issue in accessing the destination folder.

Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares.
When the Volume Shadow Copy service was running under the context of System, this was the error logged:
“failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
Which is likely due to not having permissions to write to the network location.
This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
  Then the error changed to this:
“failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
HRESULT 0x8078006b
DetailedHRESULT 0x8004230f
ErrorMessage %%2155348075
BackupState 12
VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
/></VolumeInfo>
We aren’t really seeing anything that gives any hint on what the issue is.
Any ideas? Thanks in advance!

We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free.
We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there).
  If we try another network location, we receive the exact same error.
This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
Thank you for the link.
Looking in:
Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
But it doesn’t seem to give any more details:
Log Name:
Microsoft-Windows-Backup
Source:
Microsoft-Windows-Backup
Date:
7/8/2013 8:00:12 PM
Event ID:
5
Task Category: None
Level:
Error
Keywords:
User:
SYSTEM
Computer:
servername.edu
Description:
The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>5</EventID>
<Version>3</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
<EventRecordID>30</EventRecordID>
<Correlation />
<Execution ProcessID="3028" ThreadID="3996" />
<Channel>Microsoft-Windows-Backup</Channel>
<Computer>servername.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
<Data Name="HRESULT">0x8078006b</Data>
<Data Name="DetailedHRESULT">0x8004230f</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
<Data Name="BackupState">12</Data>
<Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
<Data Name="BackupTarget">\\servername\BACKUP</Data>
<Data Name="NumOfVolumes">2</Data>
<Data Name="VolumesInfo"><VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem
Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /></VolumeInfo></Data>
<Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
<Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="PrepareBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PrepareBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="DVDFormatStartTime"><TimesList></TimesList></Data>
<Data Name="DVDFormatEndTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyStartTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyEndTime"><TimesList></TimesList></Data>
<Data Name="BackupPreviousState">2</Data>
<Data Name="ComponentStatus"><ComponentStatus></ComponentStatus></Data>
<Data Name="ComponentInfo"><ComponentInfo></ComponentInfo></Data>
<Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SystemStateBackup"><SystemState IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="BMR"><BMR IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="VssFullBackup">false</Data>
<Data Name="UserInputBMR">false</Data>
<Data Name="UserInputSSB">false</Data>
<Data Name="BackupSuccessLogPath">
</Data>
<Data Name="BackupFailureLogPath">
</Data>
<Data Name="EnumerateBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="EnumerateBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupFlags">0x9</Data>
<Data Name="ComponentInfoSummary"><ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /></Data>
</EventData>
</Event>

Import error imp-00017: following statement failed with oracle error 1659:

Hi all,
I am trying to import a file (dmp) which is of 1.63GB size,
when I type
imp
dbname/pwd@db
c:\filepath
30720
no
no
yes
yes
yes
I am getting the error imp-00017: following statement failed with oracle error 1659:
-- end it says Ora-01659 unable to allocate minextents beyond 1 in tablespace USERS
--unable to create INITIAL extent for segment in tablespace USERS
--import terminated successfully with warnings
when I looked into
select maxbytes,file_name from dba_data_files where tablespace_name='USERS';3.4360+10 c:\oracle\product\10.2.0\oradata\orcl\users01.dbf
kindly help me in solving this is.
Regards,
aak
Edited by: AAK 460425 on Apr 12, 2009 6:33 PM

Thanks,
select bytes from user_free_space where tablespace_name='USERS'
BYTES
458752
720896
458752
655360
43384832
is the size less?
My apology I have updated this in the below thread, which is same as this one.
Re: Import error

Hi. I purchased Adobe Acrobat Xi Pro from a store (card). I submitted the number (under the scratch area on the card) on the adobe website, with my personal details etc. When I submitted the form, I got an error message: 413 header length too large (a

Hi. I purchased Adobe Acrobat Xi Pro from a store (card). I submitted the number (under the scratch area on the card) on the adobe website, with my personal details etc. When I submitted the form, I got an error message: 413 header length too large (and on top the page reads JRun Servelet Error). What does this mean? What should I do next?

Hi. I purchased Adobe Acrobat Xi Pro from a store (card). I submitted the number (under the scratch area on the card) on the adobe website, with my personal details etc. When I submitted the form, I got an error message: 413 header length too large (and on top the page reads JRun Servelet Error). What does this mean? What should I do next?

Ricoh Aficio MP C2051 Scan to Folder - Windows Server 2012 Error: Authentication with the destination has failed check settings

I have recently upgraded a clients servers to Windows Server 2012 & since doing so have lost the ability to scan to folder.
Both servers are domain controllers and previously on a 2008 domain controller I would have had to make the following change to allow scan to folder:
Administrative Tools
Server Manager
Features
Group Policy Manager
Forest: ...
Default Domain Policy
Computer configuration
Policies
Windows Settings
Security Settings
Local Policies
Security Options
Microsoft Network Server: Digitally Sign Communications (Always)
- Define This Policy
- Disabled
However I have applied this to the Windows 2012 server but am still unable to scan, possibly due to added layers of security in server 2012. The error on the scanner is Authentication with the destination has failed check settings.
I have also tried the following at the server:
Policies -> Security Policies
Change Network Security: LAN Manager authentication level to: Send LM & NTLM - Use NTLMv2 session security if negotiated.
Network security: Minimum session security for NTLM SSP based (including secure RPC) clients and uncheck the require 128 bit.
Network security: Minimum session security for NTLM SSP based (including secure RPC) servers and uncheck the require 128 bit
I have created a user account on the server for the ricoh and set this in the settiings of the Ricoh and verified everything is correct.
Are there any other things I have missed?

I can email anybody the firmware module if interested and how to...
Tell me your model and email
If your offer still stands we have an Aficio MP C3300
Firmwareversion
Modulnavn Version Delnummer
System/Copy 1.13 D0255562H
Network Support 8.16.1 D0255563D
Font EXP 1.03 D0255588
OptionPCLFont 1.02 D0255589
animation 1.3.1 D0255568A
Fax 01.10.00 D0255569B
RemoteFax 01.10.00 D0255564B
Printer 1.11 D0255572A
RPCS 3.7.5.4.1 D0255574A
Option PCL 1.00 D0255580A
Scanner 01.17 D0255570C
Network DocBox 1.00 D0255567B
Web Support 1.06 D0255565B
Web Uapl 1.07 D0255566C
libcvm(v4) 4.13 D4135765B
GWFCU3-13(WW) 03.00.00 D3935570C
PowerSaving Sys 1.10 D0255560C
Engine 1.51:09 D0255117E
OpePanel 1.03 D0251492A
LANG0 1.03 D0251496
LANG1 1.03 D0251496
ADF 03.420:02 D3665604
Finisher 01.090:03 D3725112
Best Regards/
Henrik Plougstad
henrik(a)pieroth.dk

Error with VF02-header-output fails

Similar Messages

Maybe you are looking for