Error with View Quality Results in workorder

Hi All
  When I do a View Quality Results for a workorder, getting error :
      "Error   - no data found for region (/oracle/app/qa/region/ )
  Please suggest
Thanks,

please post applicaation release Db version and os platform
did you bounse apache?
was this working before or first time?
steps to reporoduce the issue ?
please see this
No Data Found For Region () When Searching Item In IProcurement [ID 1521355.1]
No Data Found for Region IRC_VACANCY_EDIT_REVIEW_PAGE Error When Updating an Approved Vacancy [ID 809593.1]
No Data Found For Region When Entering QA Results From EAM [ID 1327150.1]
Unable to view Quality Results, You have encountered an unexpected error. Please contact the System Administrator for assistance. [ID 799707.1]
AppsMAsti
Sharing Is Caring

Similar Messages

  • Run Report error while viewing the results in BIP

    Hi friends,
    When I tried to view the BIP report once after building data model with lov in an layout using BIP 10g, im getting the below error like
    Report Cannot Be Rendered Because Of An Error, contact administrator
    Im not sure with the above error, as it is not showing the cause for the problem.
    Kindly friends help me with this issue.
    Thanks
    Brgds,
    Mini

    Vineeth,
    Thanks alot for your response.
    Actually, I have installed the OBIEE in Linux. I have directly ported the RPD file that I have created in my local windows system onto the OBIEE in linux host. I am not aware of any setup that needs to be done prior to start working on this. Can you please let me know what are all the changes to be done in odbc.ini or point me to any resource which has those details.
    Thanks,
    Raj Kumar

  • IMovie to iDVD with higher quality results

    I have been working for several weeks on a 30 minute presentation using iMovie. It was a little slow at the start, but it's absolutely gorgeous now with video, stills, voice over, multiple CD tracks, etc. I am thrilled at the result and it's going to be given out to a lot of people who were involved in a huge service project. My problem is that when I export to iDVD and burn it, the photos are pretty bad. I've adjusted iDVD to highest setting, but it's still so disappointing. Options? Are there non-Apple solutions for this or another version of iDVD? I would appreciate your help. I have not been on here before so if this has been solved somewhere else--just point me there.

    Also, iMovie 9 uses single-field processing when exporting, so basically you are losing every other horizontal frame. There have been huge discussion threads about this with recommendations for obtaining better quality exports: Ziatron prefers iMovie 6 with iDVD 8/9. Steve Mullen posts lots about video quality....but does not realy use iDVD.
    http://discussions.apple.com/thread.jspa?messageID=12065177&#12065177
    http://discussions.apple.com/thread.jspa?messageID=11486202&#11486202
    http://discussions.apple.com/thread.jspa?messageID=10831381&#10831381
    http://discussions.apple.com/thread.jspa?messageID=11490388&#11490388
    These threads can get you started....there is much more info in these discussions!

  • Error while viewing the result in OBIEE

    Hi,
    we have installed OBIEE in a linux host. I am able to start the server and I am able to login. During the creation of report,.. after selecting the columns, when I press on the result , I see the following exceptions ..
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16023] The ODBC function has returned an error. The database may not be available, or the network may be down. (HY000)
    SQL Issued: SELECT "Event Facts"."Event Id" saw_0, "Event Facts"."Event Date" saw_1 FROM APPS ORDER BY saw_0, saw_1
    I have just checked if OC4J server , BI server and JAVA HOST service started properly. only JAVA HOST service did not seem to start properly. I have checked the <OBIEE Installation Directory>//OracleBIData/web/log/javahost.out.log
    It has the following error "List of process IDs must follow -p."
    Please let me know what could have been the problem causing this error.
    Thanks,
    Raj Kumar

    Vineeth,
    Thanks alot for your response.
    Actually, I have installed the OBIEE in Linux. I have directly ported the RPD file that I have created in my local windows system onto the OBIEE in linux host. I am not aware of any setup that needs to be done prior to start working on this. Can you please let me know what are all the changes to be done in odbc.ini or point me to any resource which has those details.
    Thanks,
    Raj Kumar

  • Error with viewing out of Firewire (hard to explain in 1 line)

    I am editing on an iMac with FCP 5.1. For capturing I have my DV camera running into one of the firewire ports and my external drive running into the other firewire port which I am capturing to. This works great
    However while I am editing I view the screen on a TV plugged into the output of the camera so the video streams from FCP into the camera and out into the tv. However this is having issues with not displaying the video properly and just getting black bars in footage when trying to stream footage. It looks fine on the computer but its not streaming out to the camera properly. Now I realise that the iMac has only one firewire bus but I thought that if it captures fine streaming both signals at once then the reverse should also work. Any ideas?
    G5 iMac 20inch, Macbook   Mac OS X (10.4.7)   FCS 5.1, 500GB External

    #8 External Monitor Viewing.
    Shane's Stock Answer #8:
    A simple path is mac > firewire > camera or deck > rca cables > tv
    Then start up your camera and tv, then open fcp.
    Then go View > External video > all frames
    Video playback should be Apple firewire NTSC (If you are using an NTSC set)
    Audio playback should be Audio follows Video
    Techinially, this should send synched video to your TV
    If for some reason you can't view your timeline on your external monitor, there are a few things to try:
    1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
    2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
    3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
    4) Click in the % box above the image and select FIT TO WINDOW.
    5) Go to VIEW->refresh A/V devices
    6) Make sure the Log & Capture window is closed
    If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
    Shane

  • Error with view link and ADF table Tree

    Hello
    ( Note: View objects are created based on static data but not from database tables)
    I created two view objects "SuiteViewObject" and "FamilyViewObject" which are based on static data( stored in collection) but not on database entity. A veiw link "SuiteFamilyViewLink" is created from the above two view objects. An ADFTreeTable is created from the above view objects and view link. When run the jspx page containing ADFTreeTable, following error is occured in the browser.
    JBO-30003: The application pool (staticviewobjects.staticappLocal) failed to checkout an application module due to the following exception:
    oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.InvalidOperException, msg=JBO-26016: Cannot set user query to view "FamilyViewObj2" because it is a destination in a view link
    Any help on the above error message.?
    Thanks in Advance
    Kristi
    Bangalore
    Message was edited by:
    user576892

    Hello
    The above error is coming becuase view link's SQL query expects tables. But in my case I dont have tables, view objects are created from static data source(collection).
    How to create a view link from view objects which are created based on static data source(collection)?

  • Possible error with viewing same site on desktop and iPad

    Site is viewing correctly on desktop but on iPad everything not pinned is being pushed to left with white space to the right of page.
    There are no hidden or active elements off the page anywhere..

    Here is an observation.
    With Acrobat Reader 11.0.02 installed on OS X 10.8.2 and Windows 7 (with latest updates), the reported default page display resolution in Reader's preferences is 81 for OS X, and 96 for Windows. What this means in English is that PDF that are viewed on OS X appear noticeably smaller than when viewed at 96 ppi. Like looking backwards through binoculars.
    What happens if you adjust the Reader custom display resolution to 96 ppi. Does this improve the visuals with Windows counterparts?
    On IOS, and in particular, later models of iPad and iPhone, you are looking at PDF at default display resolutions upwards to 326 ppi. I would hope that the PDF look sharper on IOS 5/6 than they do on OS X. Try setting the custom display resolution in Adobe Reader on OS X to 326 ppi. Notice any sharper (albeit) huge resolution difference?
    Are you requesting the “Best” setting for Pages PDF export, or “Better.” There is a 150 ppi resolution difference for text in those settings.

  • Error with view reports by drill down

    Hello all!
    I have problem with show drill-down reports.
    But step by step:
    I have 2 reports (made by Answers). And drill down from 1-st to 2-nd.
    When i click on link IE show that it cann't show page.
    I press F5 same times after that 2-nd report show.
    I cann't understand why it happend. Maybe You cen help me.
    Thank you.

    Thank you for all. I found the cause of the problem. In our network and security configuration in front of OBIEE service we have IIS. User connect to port of IIS (9704) and IIS connect to OBIEE. In make for more control of connect and actions.
    When I connect direct to OBIEE the problem is gone.
    Supposedly IIS created the problem when I click on reports

  • Query find no records in Enter Quality Results Form (QLTRSMDF)

    Hi,experts
    When execute query (F11/ctrl F11) in Enter Quality Results Form (QLTRSMDF) for a particular plan,say I want to query all results in that plan,it found nothing.
    In system block/last query, found that it uses occurrence and collection_id which is newly created.
    And compare with the SQL used in Update Quality Results Form,there are different conditions used,say org_id is used in the Update form.
    Is it okay to query results in Enter Quality Results Form (QLTRSMDF) of a plan?
    or it is designed to use the Update form to query and update?
    Thanks in advance!
    Morris

    No you have to use the View Quality Results Form (QLTRSINF) to see already entered collection results. The enter form is only to enter new collection results.

  • Error With Export/Print from Crystal Report Viewer

    Hello there,
    I've searched through the web and SAP discussion boards with not much luck with this issue.
    After working through this for some days now I've decided to look here for help.
    Environment:
    I have created a web Crystal Report viewer application(Developed with SBOP BI Platform 4.0 SP06 .NET SDK Runtime) that communicates with a managed Cyrstal Server 2011 SP4 (Product 14.0)
    I am able to connect and authenticate with the server, retrieve a token for communication and display reports in the Crystal report Viewer successfully.
    Problem:
    When I attempt to export, I receive the prompt to select format and pages.
    When I click export after selections most times I receive an error with the text
    Unable to cast COM object of type 'System.__ComObject' to interface type 'CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{74EEBC42-6C5D-11D3-9172-00902741EE7C}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
    Other times the page simply refreshes on export.
    When I click to print, no print dialog is displayed the page always refreshes and no error is displayed.
    No Print or Export document is ever created.
    As many print/export issues seems to be related, I'm guessing this two issues are as well.
    Notes:
    I am utilizing the ReportClientDocument model
    I am storing this in session to use as the crystal report viewer report source on postbacks
    I am assigning a subset of export formats to the crystal report viewer
    I am setting particular parameters as well on the report source
    At this point I would appreciate every assistance I may receive on this issue
    Thanks in advance,
    Below is the pertinent code
    Code:
    <aspx>
       <CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
       AutoDataBind="true" EnableDatabaseLogonPrompt="False"
       BestFitPage="False" ReuseParameterValuesOnRefresh="True"
      CssClass="reportFrame" Height="1000px" Width="1100px" EnableDrillDown="False"
      ToolPanelView="None" PrintMode="Pdf"/>
    <Codebehind>
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Web;
    using System.Web.UI;
    using System.Web.UI.WebControls;
    using CrystalDecisions.Enterprise;
    using CrystalDecisions.ReportAppServer.ClientDoc;
    using CrystalDecisions.ReportAppServer.CommonObjectModel;
    using CrystalDecisions.ReportAppServer.Controllers;
    using CrystalDecisions.ReportAppServer.DataDefModel;
    using CrystalDecisions.ReportAppServer.ReportDefModel;
    using CrystalDecisions.Shared;
    namespace ClassicInternalReportPage
        public partial class Reports : System.Web.UI.Page
            protected override void OnInit(EventArgs e)
                base.OnInit(e);
                if (!String.IsNullOrEmpty(Convert.ToString(Session["LogonToken"])) && !IsPostBack)
                    SessionMgr sessionMgr = new SessionMgr();
                    EnterpriseSession enterpriseSession = sessionMgr.LogonWithToken(Session["LogonToken"].ToString());
                    EnterpriseService reportService = enterpriseSession.GetService("RASReportFactory");
                    InfoStore infoStore = new InfoStore(enterpriseSession.GetService("InfoStore"));
                    if (reportService != null)
                        string queryString = String.Format("Select SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS "
                           + "Where SI_PROGID='CrystalEnterprise.Report' "
                           + "And SI_ID = {0} "
                           + "And SI_INSTANCE = 0", Request.QueryString["rId"]);
                        InfoObjects infoObjects = infoStore.Query(queryString);
                        ReportAppFactory reportFactory = (ReportAppFactory)reportService.Interface;
                        if (infoObjects != null && infoObjects.Count > 0)
                            ISCDReportClientDocument reportSource = reportFactory.OpenDocument(infoObjects[1].ID, 0);
                            Session["ReportClDocument"] = AssignReportParameters(reportSource) ? reportSource : null;
                            CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
                            CrystalReportViewer1.DataBind();
                //Viewer options
                // Don't enable prompting for Live and Custom
                CrystalReportViewer1.EnableParameterPrompt = !(Request.QueryString["t"] == "1" || Request.QueryString["t"] == "4");
                CrystalReportViewer1.HasToggleParameterPanelButton = CrystalReportViewer1.EnableParameterPrompt;
                CrystalReportViewer1.AllowedExportFormats = (int)(ViewerExportFormats.PdfFormat | ViewerExportFormats.ExcelFormat | ViewerExportFormats.XLSXFormat | ViewerExportFormats.CsvFormat);
            protected void Page_Load(object sender, EventArgs e)
                if (IsPostBack && CrystalReportViewer1.ReportSource == null)
                    CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
                    CrystalReportViewer1.DataBind();
            private bool AssignReportParameters(ISCDReportClientDocument reportSource)
                bool success = true;
                if (Request.QueryString["t"] == "1" || Request.QueryString["t"] == "2" || Request.QueryString["t"] == "4" )
                    reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "STORE", Session["storeParam"]);
                    if (Request.QueryString["t"] == "2")
                        reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "FromDate", Request.QueryString["fromdate"]);
                        reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "ToDate", Request.QueryString["todate"]);
                else if (Request.QueryString["t"] == "3")
                    reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "SKU", Request.QueryString["sku"]);
                else
                    //Unknown report type alert
                    success = false;
                return success;

    Thanks Don for your response,
    I'm new to the SCN spaces and my content has been moved a couple of times already.
    In response to your questions
    The runtime is installed on the web application server, if by that you mean the machine hosting the created .NET SDK application.
    My question was whether it was also required on the Crystal Server 2011 (I.E. the main enterprise server with CMS and Report management and I guess RAS and all that). I figured this would remain untouched and queries would simply be made against it to retrieve/view reports e.t.c
    If install of the SDK on Crystal Server 2011 is indeed required should I expect any interruption to any of the core services after a restart. I.E. I'm hoping that none of the SDK objects would interfere with the existing server objects (in SAP Business Objects)Reason I ask is I note that much of the SDK install directories are similar to the existing Crystal Enterprise Server 2011 (Product 14.0.0)
    Is this temp folder to be manually created/configured or is it created by the application automatically to perform tasks. Or are you referring to the default C:\Windows\Temp directory and so saying that the application would try to use this for print and export tasks?Once I'm sure which I'd give the app pool user permission
    Printing is to be client side but I figured by default (with the Crystal Report Viewer) it would simply pool and print from the user's printer. This is how it works with the previously used URL reporting approach (viewrpt.cwr). Therefore a user can print the document from wherever they are with their own printer.We don't intend on printing from the server machine, but are you suggesting that a printer must be installed on server (which one web or enterprise server) for any client side printing to work.
    App pool is running in 32 bit mode
    Initially didn't get anything useful from fiddler but I'd try and look closer on your suggestion.
    It's also possible that some of my questions are a misunderstanding of APP vs RAS vs WEB, so please feel free to clarify. Currently I see the Web server as simply the created .NET SDK Application and RAS (Crystal Server 2011 e.t.c) as the existing fully established Application server which I simply pool for information.
    Thank you for your patience and advice,

  • Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results

    Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results which I filed a report but did not receive an answer. The application to block scripts actually worsened the problem and I could not correct the situation for a while (no response from Firefox, at all). I have also been through this procedure without any one contacting me, AT ALL.
    == URL of affected sites ==
    http://http://www.facebook.com (always) and www.YouTube.com (sometimes)

    There does appear to be any support whatsoever from mighty "non caring" FIREFOX & people are getting fed up. We may as well try another system, if they can't be bothered to provide any support for their system, we can't be bothered to use their system.
    Brianeng

  • Getting a "Displaying only the newest results below. To view all results, narrow your query by adding a filter" message in error

    I have a list with almost 10000 items. I have a view that should be returning 8 items. For me, the Farm Admin, I see the full set of expected values. The message "Displaying only the newest results below. To view all results, narrow your query by
    adding a filter" shows for other users. This makes no sense -
    there ARE filters on this view. I'd rather not increase the throttle limit.
    Anthony Kelly

    Hi Ajk,
    Check that the list is not scoped by an audience; but, I'm afraid that either way admin, (e.g. non Farm admin or site collection admin)
    I'd recommend exporting to excel, create two new spreadsheets and then import as custom lists.
    Best of luck and cheers,
    Stacy Anothersharepointblog.blogspot.com

  • Running a query in a View Designer results in an error, but running the same query in a Query window works

    Hi everyone,
    Just as my title says, I have a query which I've written in a query window and it works perfectly.
    But when I try to add the query code into the view designer, it throws a Syntax error.
    Error in ON clause near '('.Unable to parse query text.
    Also, when running the query from the view designer (pressing red exclamation mark) I get a different error.
    SQL Execution Error.Executed SQL statement: SELECT Sku, ParentSku, UPC, ...Error Source: .Net SqlClient Data ProviderError Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
    Has anyone else experienced this and is there any workaround?
    I have tried to create the view with T-SQL (CREATE VIEW etc.), but when opening it in the view designer I get the error from the 1st image.
    Thank you,
    Radu

    Hi Radu,
    Yes, I have faced similar issue. I had a View and it was working totally fine but when once I opened it in via right click - View Design, it was giving parse error.
    Cause is that Query designer parse and executes the query without error but the way View designer works, it can't parse it.
    Later I ignored View desinger and just used T-SQL like CREATE/ALTER view.
    Workaround is to do right click on View - Script View as - CREATE To/ ATER To.
    Regarding Timeout error, again the issue with View designer which couldn't execute query in there and ended up with timeout error.
    If your SELECT query and SELECT * FROM YourView works fine in Query designer, you are good to go.
    Similar threads:
    View with errors still saved, and still works...
    Parsing error when creating view
    -Vaibhav Chaudhari

  • Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

    Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

    Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar.  Select Size = Medium or Large.
    Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
    Follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com.  Why, because iDVD (and iWeb) was discontinued by Apple over a year ago. 
    Why iLife 09 instead of 11?
    If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides  themes from iDVD 5-7.  The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them. 
    Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
    This shows the iDVD contents in the iLife 09 disc via Pacifist:
    You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
    OT

  • Itunes was not installed correctly error 7 windows error 126. I have tried 3 or 4 times with the same result. I have deleted a previous version and tried a fresh install. I still get the same error. help please!

    I have tried to dowload and update itunes on my PC. I have had an error message error 7 (windows error 126) several times. I have deleted the previous version of itunes and tried a clean install, with the same result. What am i doing wrong????

    Hi DavidTPerrett!
    I have an article for you that will help you troubleshoot this issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

Maybe you are looking for