Error with view reports by drill down

Hello all!
I have problem with show drill-down reports.
But step by step:
I have 2 reports (made by Answers). And drill down from 1-st to 2-nd.
When i click on link IE show that it cann't show page.
I press F5 same times after that 2-nd report show.
I cann't understand why it happend. Maybe You cen help me.
Thank you.

Thank you for all. I found the cause of the problem. In our network and security configuration in front of OBIEE service we have IIS. User connect to port of IIS (9704) and IIS connect to OBIEE. In make for more control of connect and actions.
When I connect direct to OBIEE the problem is gone.
Supposedly IIS created the problem when I click on reports

Similar Messages

How to insert "%" into the report figure in report painter/ drill down

Please kindly advice how to insert "%" in the calculated amount in the report painter/ drill down report.
Thank you
Sirirak

Hi,
Create a text variable (for query name, option available in query properties).
Processing Type would be Replacement path, replace with variable.
Give the variable name created for the selection box characteristic in 'Replace with variable' option.
This would replace value of the text variable with the user input value.
Hope this helps!

What is the difference in Interactive reports and Drill down reports?

What is the difference in Interactive reports and Drill down reports? Are they same?

Hi FRD ,
Both are same .
as far as i know there is no difference .
bye .

Reporting Services Error after Interactive sorting and drill down in pps

Hi
i have a report that has a drill down option that shows all workgroups within a specific parent group and an interactive sorting ass well on both columns parent group & workgroup
This is displayed in pps combined with a SharePoint
---the problem is that after sorting the parent group column by name i then press the drill through icon (+) next to it hopping to see all workgroups related to each parent group
- but instead
i receive this Reporting Services Error :
The value for parameter 'SortItem' is not specified. It is either missing from the function call, or it is set to null. (rsMissingParameter) Get
Online Help
If I don't press the sorting and just drill through it works fine. the sorting itself also works fine.
any suggestions ?

Hi Hyaron,
I am unable to reproduce the issue in my test environment. How did you add the drilldown feature? Were you doing that by setting visibility of the column or of the group? Please ensure to add the drilldown functionality by set the visibility of the workgroup
from the Grouping Pane in the Report Designer.
How did you add the Interactive Sorting on the headers of the two columns? Based on the drilldown functionality, the Interactive Sorting on the second column doesn’t work. So, you can move the Interactive Sorting on the second column. When configuring the
Interactive sorting on the first column, you should set the parent group to sort, and sort by the field that the parent group groups by.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support

Error with Member Report

HI Gurus,
I have a dimension with single hierarchy, I am able to process the dimension and view the members in a hierarchy on the excel.
On the admin tool under dimension -> Maintain dimension members -> View member Report gives an error that member report cannot be reviewed because of a circular reference and the application terminates. I am able to perform this activity for rest of the dimensions.
Any insight on this.
thanks

When you select the Dimension, Maintain Dimension Members, the Excel file opens, then click the View Member Report, do you get the interface box that allows you to select the dimension hierarchy and properties to add to your report, or do you get the error only? If you are getting the box called Make Report, and the information in the box states, cannot generate report, Error, there is a problem in the member which may indicate a circular reference, then there IS an issue with your hierachy and memberset. I am suprised that the file processes, but I would guess there a bad reference in the existing hierarchy.
My advice would be to take a portion of the dimension file, (ie delete some of the hierarchy), process it and test to see if you can build a report. Once you get to a point where the report may be built successfully, then add back in portions of the hierarchy until you get or find the error or portion of the file that will not allow for a report to be build. This may be an extreme test, but it should help narrow down the place where the report or hierarchy fails. I have tested examples in my system, and the report will not be constructed if the dimension is not processed succesfully.

Report Designer drill down issue

Hi Friends,
I am having an issue with report designer.When i run the report designer the characteristics are getting displayed in drill down form for each row of values.Is there any way to restrict this. i want to display the header part in tabular view.
Thanks in advance.
Mandadi.

Hi Srikanth,
In Report designer output i'm getting the header part as drill down which i dont want.
i want the output in the following format
header1        header2          header3       value
xxxx             abc                efg                10
yyyy             cfg                 tre                20
but i'm getting in the drill down format as follows
xxxx
abc
efg           10
yyyy
cfg
tre           20
Thanks
Mandadi

REPORT PAINTER DRILL DOWN REPORT

Hi,
i need to develop report painter report with drill down for cost elments and month wise
out should be cost elements and all months
Please suggest how to use drill down
Thanks and Regards
RAVi

Along these same lines. I have a user that cannot drill down into a drill down report. Let me clarify. This report does have drill down capability as some people can drill down into it but others cannot. If a user has authorization to run a report via GRR3. When they click on an item to drill down they do not get an authorization error statement, all they get is a statment that says "list contains no data". Any ideas why some can drill down and some can't? Thanks
Mark

Adding multiple views to a drill down pie chart

Hi,
I'm currently using OBIEE 10g and have a problem when drilling down on a pie chart.
I have a dashboard named spending analytics and it shows in a pie chart, spending by different categories (airlines, automotive, etc).
When i click on the Airlines slice of the whole pie chart i drill down to a pie chart with the spending from different airlines (American, United, etc)
However, I want to have another level of drill down where i can choose an option as speding by state as well. So, spending by state should be part of the airlines.
Then i should have Total Spending by category(airline) > Spending by type(United) > Spending by state(PA,DC, etc)
How can this be done?

Hi User,
Drill Down from Pie chart can be done.
Create a Pie chart report intially, add the same to compound layout.
Now, edit the pie chart.
You can view, Additional charting options icon. Click on it.
Now click on 3rd tab -> Interaction.
Select Navigate.
Add Navigation Target. Here, Browse the detail report and add the caption.
Here, you can add as many detail reports as you like.
I have created the same and added 3 different detail reports. It worked for me. Even, i used 10g.
I hope the same with you.
Award some points if it helps you and resolves your issue :)
Close the thread.

How to Avoid Printing the data twice when the sub report has drill down?

Hello,
I have a sub report that has drill down which is placed in report footer.When i run the report sub report displays the data but when i tried to drill down it displays the same data again.After that i can able to drill down on sub report.Is there any way to avoid
printing the same data twice.
Thanks in advance.

Hi,
If the subreport you're referring to does not grow in size and it does not span multiple pages and you know the size of it, here's what you can do to stop drilling into subreports :
1) Create a text object as large as the subreport (perhaps bigger than it) and fill it with spaces or new lines
2) Place it 'over' the subreport such that it covers the entire area occupied by the subreport
3) The subreport at all times should be smaller than the text object in all dimensions
Now, when you hover the mouse over the subreport, there isn't any magnifying glass for you to drill down into.
If the subreport has further drill-down functionality, then this isn't for you! Because, it just wouldn't allow you click on any objects in the subreport because of the text object eclipsing it. This is the only workaround I know at this point in time and I know a lot of users are looking for this.
I would suggest that you log this as an Enhancement Request at http://ideas.sap.com for our developers to have a look into this.
And finally, I also found an old forum post where Jamie has suggested a way to get this working on the Business Objects Environment. Give it a shot, if that's where the reports are eventually run.
How to disable subreport view
Hope this helps!
-Abhilash

OBIEE 11g Report-When drilling down to lower level, totals are not matching

Hi All,
I am creating a report in Analytics 7.9.6.3 , OBIEE 11g - Let’s say Budget Cost/Actual Cost based on the Date Dimension
Have selected the Fiscal Year Dim, Fact Budget Cost, Fact Actual Cost
FY BCost ACost
2011 100 120
2012 150 140
Total 250 260
But here when I am drilling down from Year to Quarter and Period - The values are not matching with the totals....
FY FY Qrt BCost ACost
2011 2011 Q1 80 100
2011 Q2 100 90
2011 Q3 110 120
2011 Q4 90 130
Total 380 440
Fiscal Year, Fiscal Quarter Budget Cost and Actual Cost are not returning correct results – When selecting cost's by fiscal year, or filtering on a specific fiscal year, the amount returned does not equal the fiscal year total;
when I am drilling down to Quarter and Period Level the BCost & ACosts are bumping the Numbers as above and not matching with totals
Any suggestions?

Check out the query in both the times.Execute against database and try to sum the data for quarter/period and compare it with Year data.
Just try to differentiate is it a report total that is getting wrong or the data in the database table itself is getting wrong stored.
Mark as helpful if it helps.
Regards,
Veeresh Rayan

Cash Management Report FF7B - drill-down from planning levels to AP/AR OIs

Hi
I'm configuring cash management and have created all planning levels and groups needed.
All master data, ie GL accounts, vendors and customers, have the correct planning level or group.
I've created all the groupings etc that I need.
I'm running the reports FF7A and FF7B. I have two questions and problems.
1. When running the Liquidity Forecsat for customers and vendors I drill-down to the standard PL or SL planning levels for AP and AR postings respectively. Then I drill into the planning groups correctly (E1-E9 and R1-R8). But when I try to drill into the cash management detail records (or is it the AP/AR line items?) I get "Memo Records: List - List Contains No Data". This happens every time. Should I now see the AP or AP line items? Or should I see some cash management memo records? I have deleted all the cash management data several times and recreated but I still get this problem (using reports RFFDDL00 and RFFDKU00)
When I do the same for purchase orders, purchase requisitions or sales orders I see a Memo Records List which agrees with the previous planning level total and I can then drill into the actiual POs, PRs or SOs from this list without an issue.
2. When running the Cash Position and I do the drill-down to the GL Line Items, I get an enormous list which does not just show the total of items at the previous planning level. Why is this please? Example: a bank account with a balance of £2,000 (shown on the panning level) but with 000's of line items totalling say £5m. Again I have deleted the CM data and recreated but without any improvement to the problem.
Any help anyone can give me with these issues will be very much appreciated.
Thanks.
Wayne

Hi
I have the same trouble with Tcode FF7B. There´s a message "Memo Records: List - List Contains No Data"; bit in the TcodeFF7A, it runs OK. The message appears just witn Tcode FF7A.
Also, There´s all TR data in tables FDSB for GL accounts, FDSR and FDFIEP for customers/vendors.
Can you help me?? can you solved this issue?
Tanks for your Help

SAP Report Painter (Drill down)

Hi, SAP Experts,
I'm Henry. This is my first post on SCN.
I'm trying to solve a problem on drill down report of report painter.
I don't have much experiences. I really need your help.
The problem is that I developed one report painter (Balance Sheet) and one query (Line item report by account code).
I put the query on the report painter as drill down report. So, when I click a row on the report painter,
It should go to the query and see appropriate data on it.
However, somehow, company code is NOT copied to the query. Therefore, the result is the query shows all compnies data.
*My client has several compnay codes.
<Example>
[Selection field on the report painter (BS)]
   *Table: FAGLFLEXT
   1. Company code: "A1"
   2. Fiscal Year: "2014"
   3. Fiscal Month: "3"
[Selection field on the query (Line item report by account code)]
   *Logical DB: SDF
   1. Company code: blank (This is the problem. I need to know why the company code isn't copied)
   2. Account code: xxxxxxxxx (The account code is copied from the report painter. This is no problem.)
   3. Fiscal Year: "2014" (No problem)
   4. Fiscal Month: "3" (No problem)
   *After clicking a row on the report painter, I can see all companise data on the query. The query should give only one company which is selected.
If you have any solution or knowledge, could you please share it with me?
If you give me some advice, I would really appreciate it.
Best Regards,
Henry

Hiii Sai Krishna,
can u forward the same documentation to me..plsss
my mail id - [email protected]
thanks in advance
regards
ramki

Inconsistency in upper level report and drill down report

I have to reports:
1) Higher level report pulls data against customers and shows aggregated data for all promotions for that customer from a table A.
2) Lower level report pulls data from the same table A, but for all promotions against a customer after i drill down on a Customer.
However, the values of a measure when summed up for a customer in the higher and lower level reports, does not match sometimes. Sometimes its in sync, sometimes its not.
My Oracle BI servers are 2 in no. with clustered configuration. Can this be an issue related to caching of measure values? If not, please give me pointers in other directions i can look.

clustering is not a problem here....just check for some example...and do some unit testing to find the rootcause of mismatch..it might be including some some extra values..

Crystal Reports 2008 Server Error when viewing report

Hello All,
I have loaded a CR 2008 report onto the CR 2008 Server. When I view the report from InfoView or CMC, I get the following error message:
Error in File <report name>: Unknown Database Connector Error .
I setup the ODBC datasources on the server as they are on my client PC where the Report originally worked. Are the ODBC datasource connections supposed to copy over with the report? Or do I have to manually enter them into the "Database Configuration" section?
Thank you in advance.

1212487 - Error: "CRAXDRT Error Occured on Server. Error Number:-2147221005"
Symptom
A report is called through the Active Server Pages (ASP) Report Server to be displayed in the Report Viewer for ActiveX. However, the report is displayed with blank pages and when the viewer is switched to the Report Viewer for HTML the following error is displayed:
"CRAXDRT Error Occurred on Server. Error Number:-2147221005 Error Description: 006ASP 0177 Server.CreateObject Failed~Invalid Class String"
The same ASP application returns the report correctly when it is called from a client computer with the full version of Crystal Report 8 Developer Edition installed.
Resolution
It was found that the file, Emfgen.dll, was not installed and registered on the web server computer during the installation of the Crystal Reports ASP Reports Server. The report could be displayed correctly on the client computer, without Crystal Reports Developer Edition installed, after this file had been installed on the web server computer.
For more information on installing the Crystal Reports web components please search for and download Scr8_WebManualInstall.zip from our website at:

BEx analyzer don't work move columns in report (like drill down)

Hi
    I have an issue on BEx Analyzer...    When I built one report... add some characteristics and soo on... but then I need to move the order of columns... then I try to drill down.. or move to order of column... It doesn´t work,
    I did this function before.. when the poin of the mouse it's convert with other draw... like -->
                                           <--
    But this time it's not possible...
    Then If I press the icon that say design mode... I saw that the option of navigation is active... and when I close the design mode... the functionality of move columns work...:(
    It's difficult that each time that the user need to move columns in Bex will go to design mode... just for activate..
    I know thta we have some function on context menu.. for move columns one by other... but not for certain position..
    Could you help me please?
    I will appreciate your help and I will assign points for your answers.
Alice

Hi Alice,,
This happens some time, when i am unable to drill down by just dragging and dropping the columns. though i could not find out why. Best thing, what i do, i refresh the query and next time it works Ok.. and other th ing what you can do, right click, on the characteristics list on the left pane, go to "change drilldown", then " drill down by" there the user can select the option he is looking in for.
Hope this helps.
Shakeel.

Error with view reports by drill down

Similar Messages

Maybe you are looking for