Error with Voided Check

Hi all, I am having an issue with a check that appears to be voided.  When running FCHX to extract the check to be sent to the bank we get a failure message saying the check is invalid.  I tried to run FCHG to reverse the voiding of the check but it tells me that check data does not exist.  I then tried to run FCHE to delete the check and that did not work either, I received an error message saying only manually voided checks can be deleted.  I either need to update the database so the check looks like it has been extracted or delete the check.  If I can't do either than FCHX will continue to fail for that check when we run it.  Anyone have any ideas?
Thanks!

Hi Brett,
With note 1014716 the below mentioned behaviour was introduced
in standard, with this the system checks that the name in the
check PAYR-ZNME1 is blank that is contains only (CO) values ' .'. Then
the error FIBL010 is shown as in your case.
According to SAP standard system design, a check should contain correct
payee information. If it is blank, the above error is
shown as you have already noticed in the standard coding.
See the below part standard source code:
IF l_txtfield CO ' .'.
CALL FUNCTION 'READ_CUSTOMIZED_MESSAGE'
  EXPORTING
    I_ARBGB = 'FIBL'
    I_DTYPE = 'E'
    I_MSGNR = '010'
  IMPORTING
    E_MSGTY = l_msgty.
IF l_msgty NE '-'.
  MESSAGE ID 'FIBL' TYPE l_msgty NUMBER '010' WITH i_chect txtfield.
ENDIF.
This change is as per changes with note 1014716.
Please refer the solution part of the Note 1056209 which should help you
to resolve this issue.
Best Regards,
Fernando Evangelista

Similar Messages

  • Dbx error with access checking after attaching

    I used dbx - <pid> to attach to a process that had LD_PRELOAD /opt/SUNWspro/lib/librtc.so in its environment. I had previously used the same setup to enable leaks/memuse checking. When I tried to enable access checking I got the following error:
    (dbx 5) check -all
    access checking - ON
    memuse checking - ON
    RTC: Enabling Error Checking...
    RTC: access error limit reached -- disabling access checking
    RTC: Running program...
    Setup is Sol8 Forte 6U2. Any thoughts?

    Thanks. Meanwhile I've found another problem of course. I'm again trying to get access/leaks checking working in my process. This time, the process was started from within dbx, no attaching, but the process died with a SEGV in __rtc_trap_handler:
    detected a multithreaded program
    access checking - ON
    memuse checking - ON
    Running: sogo
    (process id 2972)
    RTC: Enabling Error Checking...
    RTC: Running program...
    stopped in main at line 98 in file "sogo.cpp"
    98 return ::sogo::main(argc, argv, arge);
    dbx: warning: can't find symbolic information for thrown type
    t@3 (l@3) signal SEGV (no mapping at the fault address) in __rtc_trap_handler at 0xfe9610d8
    0xfe9610d8: __rtc_trap_handler+0x0058: ld [%l5], %l0
    dbx: warning: invalid frame pointer
    (dbx 1) where
    current thread: t@3
    [1] setup_context(0xfdf90600, 0xf8ffbfa0, 0xf3514738, 0xf8f00000, 0xfc000, 0xfb7fbbd0), at 0xf35146d8
    [2] thrpcreate(0xfdf90200, 0x0, 0xfdf90600, 0x0, 0x41, 0x0), at 0xf3508fc4
    [3] thrcreate(0x0, 0x0, 0xe0900d54, 0x0, 0x41, 0x0), at 0xf3509208
    [4] thr_create(0x0, 0x0, 0xe0900d54, 0x0, 0x41, 0x0), at 0xfe947738
    [5] door_create_server(0x0, 0xffffffff, 0x2, 0x1, 0xfb7fbf18, 0x3), at 0xe0900da8
    [6] __door_return(0x25d700, 0x0, 0x0, 0x0, 0xfb7fbfa0, 0x4), at 0xf9999264
    (dbx 2)
    the actuall invocation of dbx looked like (from a script):
    dbx -C -q -c \
    "check -all -frames 16; \
    ignore SIGQUIT ; \
    dbxenv run_autostart on ; \
    runargs $* ; \
    step ; \
    cont" \
    sogo &
    Does the RTC library not play nicely with doors? Setup is still sol8/6U2.
    Thanks.

  • Error in voiding check

    Hi Sappers!
    When trying to Void a check, (using FCH8), I am receiving Account 153668 2001 is blocked for posting..message.  Need to have it unblocked/all company codes and all purchasing organizations.
    Justification:
    To void and reissue check#1730509 payment owed to vendor.
    Appreciate you time!
    Edit: The vendor account and the recon account are not blocked in FK02 and FS00

    Thanks Shridhar!
    It's the vendor account that is blocked.
    When I try to unblock the vendor account in FK05 (unblock in all company codes) I get an error :
    System error on reading screen values
    Message no. F2 109
    Would appreciate your suggestions!
    Thanks for your time!

  • OraRRP Error with "Unable to copy data file;Error code 2, check disk space"

    Hi,
    Some users get this message -"Unable to copy data file;Error code 2, check disk space" when run report with orarrp, but most users do not get it.
    I check free space at both server and client side, they are very sufficient.
    I also checked directory exists for REPORTXX_TMP variable.
    My user call reports via URL (rwservlet) and it occur for all reports.
    How I can solve this problem?
    Thanks in advance.
    Tawatchai R.

    Hi,
    have the same problem now. One user has temporarily problems to download .rrpa files via URL (rwservlet) request. Error code: -"Unable to copy data file;Error code 2, check disk space". Did you get a solution??
    Thanks in advance. Axel

  • Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

    Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

    in OIM 11g R2
    Message was edited by: 2b3c0737-074f-48d0-a760-e24e3ed9a37c

  • TS2516 an error occurred uploading my iPhoto Book order. It puts the book together and starts to send but at the very last moment comes up with an error message. but checking the book in iPhoto there are no problems to be found.

    an error occurred uploading my iPhoto Book order. It puts the book together and starts to send but at the very last moment comes up with an error message. but checking the book in iPhoto there are no problems to be found.

    This user talked to Apple Support personnel and confirms what Larry is suggesting:
    crowland1066
    Re: book upload fails
    Nov 30, 2013 3:02 PM (in response to pablo123)
    Just got off the phone with apple support.  If the photo book completes the assembly process but fails during the upload process the problem is in their overloaded servers.They just started a free shipping promotion for the holidays which has increased the traffic dramatically. I bought a calendar a week ago and it went right through. I'm going to try again during less peak times.
    Happy Holidays

  • Background job failing with license check error

    Hi Experts
    In our ERP 6.0 system ,all the background jobs are failing with license check error.
    Have checked the license in SLICENSE and the license is fine.
    There is no warning while users are loggign in ,but when any background job is runing its failing with error
    Job started
    Logon not possible (error in license check)
    Job cancelled after system exception ERROR_MESSAGE
    Also performed the license test which is failing
    F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
    \XX1_DVEBMGS00_host_xx
    Protocol saplicense test:
    Read sapsytem name
           ok, sapsytem name = XX1
    Read message server host
           ok, host = hostname
    Read message server service port
           ok, service port = sapmsXX1
    Connect to message server
           ok, connect done
    Read hardware key from message server
           ok, got hardware key
    Detach from message server
           ok, detached
    Check hardware key
           ok, hardware key = T0343073854
    Connect to database
           ok, connected
    Check license
           ok, check done
    Disconnect database
           ok, database disconnected
    test result: license test failed
    LICENSE system: XX1 hardware key: T0343073854 expiration_date:
            installation no:  key:
            userlimit: 0 productid: R3_BASIS
            system-nr:
    license expired ***
    Please suggest how to troubleshoot.
    Regards
    Ajay

    @Michael
    In SLICENSe the Hardware key field is not BLUE or BLACK and its showing the exact hardware key which i can see at OS level with saplicense -get command.
    @Jagadish
    Note is good refrence, i reiinstalled the Digitally signed license with saplikey command and it was successful.
    But still the license test is failing at OS Level..below is the command prompt output.
    ===================================================================
    F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplikey -install C:\license_script_XX.txt pf
    =F:\usr\sap\XX\SYS\profile\XX_DVEBMGS00_mngsez148079
    SAP License Key Administration  -  Copyright (C) 2003 SAP AG
    2 SAP license key(s) successfully installed.
    F:\usr\sap\XX\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
    \MD1_DVEBMGS00_mngsez148079
    Protocol saplicense test:
    Read sapsytem name
           ok, sapsytem name = XX1
    Read message server host
           ok, host = host
    Read message server service port
           ok, service port = sapmsXX1
    Connect to message server
           ok, connect done
    Read hardware key from message server
           ok, got hardware key
    Detach from message server
           ok, detached
    Check hardware key
           ok, hardware key = T0343073854
    Connect to database
           ok, connected
    Check license
           ok, check done
    Disconnect database
           ok, database disconnected
    test result: license test failed
    LICENSE system: XX1 hardware key: T0343073854 expiration_date:
            installation no:  key:
            userlimit: 0 productid: R3_BASIS
            system-nr:
    license expired ***
    ============================================================
    @Juan
    The hardware key was changed and we requested a new license with new hardware key,system was runing fine for couple of weeks with all background jiobs for SPAM./SAINT Ok .We performed EHP4 on this system.
    But now this issue is here,so i guess we should troubleshoot.
    Please let me know any other pointers.
    Regards
    Ajay
    PS In SLICENSE new installed license is fine and all users can login.

  • Our apologies but there was an unexpected error with the application. This problem has been noted, and an email has been sent to the administrators. Please check back in a few hours to try the download again. What is

    What is going on here. I've waited 4 weeks for my ipad which will not do anything untill I've downloaded the latest version of itunes which I can't do because this message keeps appearing,
    Our apologies but there was an unexpected error with the application.
    This problem has been noted, and an email has been sent to the administrators.
    Please check back in a few hours to try the download again.
    Reading another post, someone is still trying after two days!
    Anyone got a solution to this please, or, if not, does anyone know how to email itunes.
    Thanks, Allan

    Found this
    http://www.v3.co.uk/v3-uk/download-review/1955243/apple-itunes-1011
    Hope it helps

  • Table BUT000 error in DDIC - Check table with SE14

    Hi Experts,
    When I import the sap_all profile to a new SAP BI 7 installation, i get the message
    Table BUT000 error in DDIC - Check table with SE14
    Is it a serious problem or I can continue using this BI platform?
    Regards
    Obayd

    HI,
    This is some wat not that much a general problem any way Have a look at the SAP Note 1276895 - Add. info. about Upgrading to SAP Solution Manager 7.0 EHP1 and
    SAP Note 1169247 - Enhancements to Solution Manager 7.0 EHP1 upgrade.
    thanks,
    karthik

  • Error: Table /1FB/MD___M8001X error in DDIC - Check table with SE14

    Hi Buddy,
    I have some trouble with copy client 000 to 400, Error: Table /1FB/MD___M8001X error in DDIC - Check table with SE14.
    TABL /1FB/MD___M8001X was not activated
    Check table /1FB/MD___M8001X (MST.EKA/14.04.11/10:33)
    POSITION is a reserved word (Select another field name)
    Field name MANDT can be provided in this system. Please do not use.
    Field name SID can be provided in this system. Please do not use.
    Field name TABNAME can be provided in this system. Please do not use.
    Field name FIELDNAME can be provided in this system. Please do not use.
    Field name AS4LOCAL can be provided in this system. Please do not use.
    Field name AS4VERS can be provided in this system. Please do not use.
    Field name POSITION can be provided in this system. Please do not use.
    Index /1FB/MD___M8001X-01 is not in the customer namespace
    Table /1FB/MD___M8001X must be created in the database
    Check on table /1FB/MD___M8001X resulted in errors
    how to solve this problem...??
    Thanks & Regards
    Eka Sumargo

    Hi MST Support
    Are there any other errors in SCC3. What kind of client copy you're performing SAP_ALL or CUST?
    As per the logs in your post it seems that the table MD___M8001X does not exist in the database.You could try SE11 or SE14 to check the table.
    Any other info would be really helpful.
    Regards,

  • When i do a softwre update it comes up with an error occurred while checking for a software update

    can you help

    I had a jailbroken ipod touch 4th generation, 8 Gigabyte model with about 150mb left of free storage. I tried checking for an update on my ipod touch using the OTA A LOT OF TIMES but it said, "an error occured while checking for a software update." I finally backed up my ipod to iCloud and iTunes and updated my ipod using my desktop PC. I now have an UNJAILBROKEN ipod running IOS 5.1.

  • Error with font

    Error with font as shown in the image below.
    http://i1085.photobucket.com/albums/j432/Lazmarr/Firefoxfontweird2.png

    Hello,
    Firefox on Windows is now following display scaling options which may render text larger on high resolution displays.
    You can adjust your screen resolution.
    To modify it do the following:
    * Type '''about:config''' into the Firefox address bar and tap on the Enter key.
    * If the warning '''This might void your warranty''' appears, click '''I'll be careful, I promise'''.
    * Search for '''layout.css.devPixelsPerPx'''
    [[Image:Fx22layout.css.devPixelsPerPx]]
    * Double-click on layout.css.devPixelsPerPx to modify its value. The default is -1.0 in Firefox 22 and above. Change it to '''1.0''' to make it work like in previous Firefox versions.
    If necessary, further adjust the value in 0.1 or 0.05 steps. Use values between 1.0 and about 0.5 to reduce elements in size. Use values greater than 1.0 to increase size. For example, a value of 1.25 will increase font size to 125% to accommodate the default DPI setting in Windows 8. '''Double check the value that you enter.''' Setting a too small value will make everything disappear and a too large value will blow things up.
    If web pages still need to be adjusted then you can look at the [https://addons.mozilla.org/firefox/addon/default-fullzoom-level/ Default FullZoom Level] or [https://addons.mozilla.org/firefox/addon/nosquint/ NoSquint] extension.
    To adjust the font size for the user interface, you can use the [https://addons.mozilla.org/firefox/addon/theme-font-size-changer/ Theme Font & Size Changer] extension.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Regarding reversal of void check using FCH8

    Hi gurus,
        I am trying to reverse a void check using T-Code FCH8. I gave the options 5 for void reason code and 03 for Reversal Reason. I want the posting date to be the date when I reverse it i.e 10/22/2008 which is today. But when I hit enter it gave me an error message "Reversal Reason 03 only allows posting date 09/18/2008". This was the date when it was originally done. I tried it with different Reversal Reason  but got the same message. Is there a way that I can keep todays posting date for reversing it.
          Let me know if I am not clear. Can any one give some suggestions regarding this.
    Thanks in advance.
    Ravi Boppana

    Hi Shannon,
               It worked out well. Thank you very much that is what i was exactly looking for.
             I have another question regarding Configuration. When I am pulling Balance sheet or Income statement I am getting only year to date comparision. I want to get month to date comparision. Even if I select the field 11 to 11 its giving me year to date camparision. Is there a way to set it up. And the other issue is that for sales reports it is taking only calender year where as our requirement is to get fiscal year there. Can you also suggest me a way for this.
          Let me know if I am not clear about anything.
      Thanks in advance.
    Ravi Boppana

  • Error in Print checks in F110

    Hi ,
    I am facing errors in the checks number sequence in F110.
    For example, payment run today was supposed to pay 6 vendors (starting with 7xxxx)
    Proposal run was all correct but when the printing started, 57 printed checks came out with values paid on July 12 with vendors starting with (1xxxx). We were expecting only 6 checks.
    The check number ranges in FCHI updated 6 numbers, however, it printed 57 in the total and now we can not void the remaining 51 because SAP does not recognize.
    Any ideas what might have happened in SAP ?
    Regards,
    Rogerio

    Rogerio
    Please analyse the checks that have been printed vis-a-vis what had to be printed. There could be many things that are wrong here. Like my friends have said, the number of invoices could have been 57!! According to you, 6 checks need to be printed. This is based on the numbr of vendors...Now are the number of invoices 6? Also like my friend has said review the configuration in FBZP. You should also check the Vendor master data where in the automatic payment transaction, there is a check box for Individual Pmnt. When this is ticked, the payments are not grouped together.
    Please review these and let us know so that there could be a solution for you.
    Karthik

  • Elisa for i586: try to build gdk-pixbuf, error with libtool

    Hi there!
    I set up Archlinux on my Barebone, great job with the "new" i586 repo!
    i try to build to build the packages on my laptop by simply editing my makepkg.conf to:
    CARCH="i586"
    CHOST="i586-pc-linux-gnu"
    CFLAGS="-march=i586 -mtune=generic -O2 -pipe"
    CXXFLAGS="-march=i586 -mtune=generic -O2 -pipe"
    this works for me for freevo, mplayer and many other programs. but now i tried to install elisa on this machine, everything build correct, but when i start elisa, i only get:
    #--> elisa
    Launcher core version: 0.5.29
    /usr/lib/python2.6/site-packages/twisted/internet/_sslverify.py:5: DeprecationWarning: the md5 module is deprecated; use hashlib instead
    import itertools, md5
    Current core version: 0.5.29
    /usr/lib/python2.6/site-packages/elisa/core/utils/classinit.py:34: UserWarning:
    ClassInitMeta class is deprecated
    warn("ClassInitMeta class is deprecated")
    Traceback (most recent call last):
    File "/usr/bin/elisa", line 8, in <module>
    load_entry_point('elisa==0.5.29', 'gui_scripts', 'elisa')()
    File "/usr/lib/python2.6/site-packages/elisa/core/launcher.py", line 380, in main
    Launcher().main(sys.argv)
    File "/usr/lib/python2.6/site-packages/elisa/core/launcher.py", line 83, in main
    return self.main_after_voodoo(argv)
    File "/usr/lib/python2.6/site-packages/elisa/core/launcher.py", line 224, in main_after_voodoo
    self.run_application()
    File "/usr/lib/python2.6/site-packages/elisa/core/launcher.py", line 351, in run_application
    application = Application(self.options)
    File "/usr/lib/python2.6/site-packages/elisa/core/application.py", line 228, in __init__
    self._splash = SplashScreen()
    File "/usr/lib/python2.6/site-packages/elisa/core/utils/splash_screen.py", line 74, in __init__
    pixbuf = gtk.gdk.pixbuf_new_from_file(LOGO_PATH_SQUARE)
    glib.GError: Couldn't recognize the image file format for file '/usr/lib/python2.6/site-packages/elisa/core/data/splash_screen_square.png'
    gtk, gdk an anything else is build correct, so i thought, maybe there is something wrong with gdk-pixbuf. i don't post this thread in the i586 subforum, because i have the same problems building it for i686 arch, too! i fetch the newest pkgbuild from abs, heres the output:
    `--> makepkg
    ==> Making package: gdk-pixbuf 0.22.0-4 i586 (Wed Mar 4 00:26:53 CET 2009)
    ==> Checking Runtime Dependencies...
    ==> Checking Buildtime Dependencies...
    ==> Retrieving Sources...
    -> Found gdk-pixbuf-0.22.0.tar.bz2 in build dir
    -> Found gdk-pixbuf-0.22.0-bmp_reject_corrupt.patch in build dir
    -> Found gdk-pixbuf-0.22.0-bmp_secure.patch in build dir
    -> Found gdk-pixbuf-0.22.0-loaders.patch in build dir
    -> Found gdk-pixbuf-0.22.0-m4.patch in build dir
    ==> Validating source files with md5sums...
    gdk-pixbuf-0.22.0.tar.bz2 ... Passed
    gdk-pixbuf-0.22.0-bmp_reject_corrupt.patch ... Passed
    gdk-pixbuf-0.22.0-bmp_secure.patch ... Passed
    gdk-pixbuf-0.22.0-loaders.patch ... Passed
    gdk-pixbuf-0.22.0-m4.patch ... Passed
    ==> Extracting Sources...
    -> bsdtar -x -f gdk-pixbuf-0.22.0.tar.bz2
    ==> Removing existing pkg/ directory...
    ==> Entering fakeroot environment...
    ==> Starting build()...
    patching file gdk-pixbuf/io-bmp.c
    patching file gdk-pixbuf/io-bmp.c
    Hunk #1 succeeded at 883 (offset 7 lines).
    patching file gdk-pixbuf/io-ico.c
    patching file gdk-pixbuf/io-xpm.c
    patching file gdk-pixbuf.m4
    checking for a BSD compatible install... /bin/install -c
    checking whether build environment is sane... yes
    checking whether make sets ${MAKE}... yes
    checking for working aclocal... found
    checking for working autoconf... found
    checking for working automake... found
    checking for working autoheader... found
    checking for working makeinfo... found
    checking build system type... i686-pc-linux-gnu
    checking host system type... i686-pc-linux-gnu
    checking for gcc... gcc
    checking for C compiler default output... a.out
    checking whether the C compiler works... yes
    checking whether we are cross compiling... no
    checking for executable suffix...
    checking for object suffix... o
    checking whether we are using the GNU C compiler... yes
    checking whether gcc accepts -g... yes
    checking for ld used by GCC... /usr/bin/ld
    checking if the linker (/usr/bin/ld) is GNU ld... yes
    checking for /usr/bin/ld option to reload object files... -r
    checking for BSD-compatible nm... /usr/bin/nm -B
    checking whether ln -s works... yes
    checking how to recognise dependant libraries... pass_all
    checking command to parse /usr/bin/nm -B output... ok
    checking how to run the C preprocessor... gcc -E
    checking for dlfcn.h... yes
    checking for ranlib... ranlib
    checking for strip... strip
    checking for objdir... .libs
    checking for gcc option to produce PIC... -fPIC
    checking if gcc PIC flag -fPIC works... yes
    checking if gcc static flag -static works... yes
    checking if gcc supports -c -o file.o... yes
    checking if gcc supports -c -o file.lo... yes
    checking if gcc supports -fno-rtti -fno-exceptions... yes
    checking whether the linker (/usr/bin/ld) supports shared libraries... yes
    checking how to hardcode library paths into programs... immediate
    checking whether stripping libraries is possible... yes
    checking dynamic linker characteristics... GNU/Linux ld.so
    checking if libtool supports shared libraries... yes
    checking whether to build shared libraries... yes
    checking whether to build static libraries... yes
    checking whether -lc should be explicitly linked in... no
    creating libtool
    checking for gcc... (cached) gcc
    checking whether we are using the GNU C compiler... (cached) yes
    checking whether gcc accepts -g... (cached) yes
    checking for strerror in -lcposix... no
    checking for gcc option to accept ANSI C... none needed
    checking for a BSD compatible install... /bin/install -c
    checking whether ln -s works... yes
    checking whether make sets ${MAKE}... (cached) yes
    checking how to run the C preprocessor... gcc -E
    checking for X... libraries , headers
    checking for gethostbyname... yes
    checking for connect... yes
    checking for remove... yes
    checking for shmat... yes
    checking for IceConnectionNumber in -lICE... yes
    checking whether to enable maintainer-specific portions of Makefiles... no
    checking for glib-config... /usr/bin/glib-config
    checking for GLIB - version >= 1.2.0... yes
    checking for gtk-config... /usr/bin/gtk-config
    checking for GTK - version >= 1.2.0... yes
    checking whether make is GNU Make... yes
    checking for gnome-config... no
    Not building GnomeCanvasPixbuf library
    checking whether to build gmodulized gdk-pixbuf... yes
    checking whether dynamic modules work... libtool: line 397: CDPATH: command not found
    yes
    checking for location of rgb.txt database... /usr/lib/X11/rgb.txt
    checking for TIFFReadScanline in -ltiff... yes
    checking for tiffio.h... yes
    checking for jpeg_destroy_decompress in -ljpeg... yes
    checking for jpeglib.h... yes
    checking for jpeg_simple_progression in -ljpeg... yes
    checking for png_read_info in -lpng... yes
    checking for png.h... yes
    checking for png_structp in png.h... yes
    checking for ANSI C header files... yes
    checking for dirent.h that defines DIR... yes
    checking for opendir in -ldir... no
    checking for sys/wait.h that is POSIX.1 compatible... yes
    checking return type of signal handlers... void
    checking for gtkdoc-mkdb... true
    checking gtk-doc version (1.10) >= 0.6... yes
    checking for db2html... false
    checking for x86 platform... yes
    checking compiler support for MMX... yes
    configure: creating ./config.status
    config.status: creating Makefile
    config.status: creating gdk-pixbuf.spec
    config.status: creating gdk-pixbuf/Makefile
    config.status: creating gdk-pixbuf/gdk-pixbuf-features.h
    config.status: creating gdk-pixbuf/pixops/Makefile
    config.status: creating gdk-pixbuf-config
    config.status: creating demo/Makefile
    config.status: creating doc/Makefile
    config.status: creating config.h
    config.status: config.h is unchanged
    make all-recursive
    make[1]: Entering directory `/home/andieh/build/i586/gdk-pixbuf/src/gdk-pixbuf-0.22.0'
    Making all in gdk-pixbuf
    make[2]: Entering directory `/home/andieh/build/i586/gdk-pixbuf/src/gdk-pixbuf-0.22.0/gdk-pixbuf'
    Making all in pixops
    make[3]: Entering directory `/home/andieh/build/i586/gdk-pixbuf/src/gdk-pixbuf-0.22.0/gdk-pixbuf/pixops'
    /bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/usr/include/glib-1.2 -I/usr/lib/glib/include -I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include -I../../gdk-pixbuf -march=i586 -mtune=generic -O2 -pipe -c pixops.c
    ../../libtool: line 397: CDPATH: command not found
    ../../libtool: line 1075: func_opt_split: command not found
    libtool: Version mismatch error. This is libtool 2.2.6, but the
    libtool: definition of this LT_INIT comes from an older release.
    libtool: You should recreate aclocal.m4 with macros from libtool 2.2.6
    libtool: and run autoconf again.
    make[3]: *** [pixops.lo] Error 63
    make[3]: Leaving directory `/home/andieh/build/i586/gdk-pixbuf/src/gdk-pixbuf-0.22.0/gdk-pixbuf/pixops'
    make[2]: *** [all-recursive] Error 1
    make[2]: Leaving directory `/home/andieh/build/i586/gdk-pixbuf/src/gdk-pixbuf-0.22.0/gdk-pixbuf'
    make[1]: *** [all-recursive] Error 1
    make[1]: Leaving directory `/home/andieh/build/i586/gdk-pixbuf/src/gdk-pixbuf-0.22.0'
    make: *** [all-recursive-am] Error 2
    ==> ERROR: Build Failed.
    Aborting...
    i really dont know what went wrong here. maybe one of you could try to build this, so i know there is something wrong with my machine. i also tried to build this package on the barebone itself, but there is the same error, too.
    thank you very much for your help!
    andieh

    hi stefan, thank you for your reply.
    there is no ./autogen.sh, and autoreconf gives me the following output. i tried aclocal and autoconf, too, but also no success...
    autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
    autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
    autoheader: WARNING: is deprecated and discouraged.
    autoheader:
    autoheader: WARNING: Using the third argument of `AC_DEFINE' and
    autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
    autoheader: WARNING: `acconfig.h':
    autoheader:
    autoheader: WARNING: AC_DEFINE([NEED_FUNC_MAIN], 1,
    autoheader: [Define if a function `main' is needed.])
    autoheader:
    autoheader: WARNING: More sophisticated templates can also be produced, see the
    autoheader: WARNING: documentation.
    demo/Makefile.am: required file `./depcomp' not found
    demo/Makefile.am: `automake --add-missing' can install `depcomp'
    doc/Makefile.am:160: blank line following trailing backslash
    gdk-pixbuf/Makefile.am:121: `libexecdir' is not a legitimate directory for `LTLIBRARIES'
    gdk-pixbuf/Makefile.am:70: variable `libpixbufloader_tiff_la_LIBADD' is defined but no program or
    gdk-pixbuf/Makefile.am:70: library has `libpixbufloader_tiff_la' as canonic name (possible typo)
    gdk-pixbuf/Makefile.am:56: variable `libpixbufloader_ico_la_LIBADD' is defined but no program or
    gdk-pixbuf/Makefile.am:56: library has `libpixbufloader_ico_la' as canonic name (possible typo)
    gdk-pixbuf/Makefile.am:63: variable `libpixbufloader_ras_la_LIBADD' is defined but no program or
    gdk-pixbuf/Makefile.am:63: library has `libpixbufloader_ras_la' as canonic name (possible typo)
    gdk-pixbuf/Makefile.am:49: variable `libpixbufloader_gif_la_LIBADD' is defined but no program or
    gdk-pixbuf/Makefile.am:49: library has `libpixbufloader_gif_la' as canonic name (possible typo)
    gdk-pixbuf/Makefile.am:28: variable `libpixbufloader_png_la_LIBADD' is defined but no program or
    gdk-pixbuf/Makefile.am:28: library has `libpixbufloader_png_la' as canonic name (possible typo)
    gdk-pixbuf/Makefile.am:77: variable `libpixbufloader_pnm_la_LIBADD' is defined but no program or
    gdk-pixbuf/Makefile.am:77: library has `libpixbufloader_pnm_la' as canonic name (possible typo)
    gdk-pixbuf/Makefile.am:42: variable `libpixbufloader_xpm_la_LIBADD' is defined but no program or
    gdk-pixbuf/Makefile.am:42: library has `libpixbufloader_xpm_la' as canonic name (possible typo)
    gdk-pixbuf/Makefile.am:91: variable `libpixbufloader_xbm_la_LIBADD' is defined but no program or
    gdk-pixbuf/Makefile.am:91: library has `libpixbufloader_xbm_la' as canonic name (possible typo)
    gdk-pixbuf/Makefile.am:84: variable `libpixbufloader_bmp_la_LIBADD' is defined but no program or
    gdk-pixbuf/Makefile.am:84: library has `libpixbufloader_bmp_la' as canonic name (possible typo)
    gdk-pixbuf/Makefile.am:35: variable `libpixbufloader_jpeg_la_LIBADD' is defined but no program or
    gdk-pixbuf/Makefile.am:35: library has `libpixbufloader_jpeg_la' as canonic name (possible typo)
    gdk-pixbuf/Makefile.am:76: variable `libpixbufloader_pnm_la_LDFLAGS' is defined but no program or
    gdk-pixbuf/Makefile.am:76: library has `libpixbufloader_pnm_la' as canonic name (possible typo)
    gdk-pixbuf/Makefile.am:69: variable `libpixbufloader_tiff_la_LDFLAGS' is defined but no program or
    gdk-pixbuf/Makefile.am:69: library has `libpixbufloader_tiff_la' as canonic name (possible typo)
    gdk-pixbuf/Makefile.am:41: variable `libpixbufloader_xpm_la_LDFLAGS' is defined but no program or
    gdk-pixbuf/Makefile.am:41: library has `libpixbufloader_xpm_la' as canonic name (possible typo)
    gdk-pixbuf/Makefile.am:62: variable `libpixbufloader_ras_la_LDFLAGS' is defined but no program or
    gdk-pixbuf/Makefile.am:62: library has `libpixbufloader_ras_la' as canonic name (possible typo)
    gdk-pixbuf/Makefile.am:90: variable `libpixbufloader_xbm_la_LDFLAGS' is defined but no program or
    gdk-pixbuf/Makefile.am:90: library has `libpixbufloader_xbm_la' as canonic name (possible typo)
    gdk-pixbuf/Makefile.am:83: variable `libpixbufloader_bmp_la_LDFLAGS' is defined but no program or
    gdk-pixbuf/Makefile.am:83: library has `libpixbufloader_bmp_la' as canonic name (possible typo)
    gdk-pixbuf/Makefile.am:27: variable `libpixbufloader_png_la_LDFLAGS' is defined but no program or
    gdk-pixbuf/Makefile.am:27: library has `libpixbufloader_png_la' as canonic name (possible typo)
    gdk-pixbuf/Makefile.am:34: variable `libpixbufloader_jpeg_la_LDFLAGS' is defined but no program or
    gdk-pixbuf/Makefile.am:34: library has `libpixbufloader_jpeg_la' as canonic name (possible typo)
    gdk-pixbuf/Makefile.am:48: variable `libpixbufloader_gif_la_LDFLAGS' is defined but no program or
    gdk-pixbuf/Makefile.am:48: library has `libpixbufloader_gif_la' as canonic name (possible typo)
    gdk-pixbuf/Makefile.am:55: variable `libpixbufloader_ico_la_LDFLAGS' is defined but no program or
    gdk-pixbuf/Makefile.am:55: library has `libpixbufloader_ico_la' as canonic name (possible typo)
    /usr/share/automake-1.10/am/depend2.am: am__fastdepCCAS does not appear in AM_CONDITIONAL
    /usr/share/automake-1.10/am/depend2.am: The usual way to define `am__fastdepCCAS' is to add `AM_PROG_AS'
    /usr/share/automake-1.10/am/depend2.am: to `configure.in' and run `aclocal' and `autoconf' again.
    gdk-pixbuf/pixops/Makefile.am: Preprocessed Assembler source seen but `CCAS' is undefined
    gdk-pixbuf/pixops/Makefile.am: The usual way to define `CCAS' is to add `AM_PROG_AS'
    gdk-pixbuf/pixops/Makefile.am: to `configure.in' and run `aclocal' and `autoconf' again.
    gdk-pixbuf/pixops/Makefile.am: Preprocessed Assembler source seen but `CCASFLAGS' is undefined
    gdk-pixbuf/pixops/Makefile.am: The usual way to define `CCASFLAGS' is to add `AM_PROG_AS'
    gdk-pixbuf/pixops/Makefile.am: to `configure.in' and run `aclocal' and `autoconf' again.
    autoreconf: automake failed with exit status: 1

Maybe you are looking for