"Error: writer not found"

Anyone else get this when trying to export a WMV from CS3? I believe it's related to installing the trial of CS4, which I did last week.
Been searching the web, and no fixes as yet!

Did you check all 7,190,000 hits from Google? STFW again.

Similar Messages

Export error: Writer not found

Hello,
I am using PPCS3 with Aspect HD.
I am using the Cineform HD 30p preset.
I keep getting an export error: writer not found
when I try to export a short movie using two uncompressed .avi's I obtained from 3DS Max 2009.
Any ideas what "Writer not found" means.
Simon

Have you installed anything CS4 at all? Even a public beta of Soundbooth or some other non-Premiere component?
I never did find out what I installed that trashed .wmv export for me in Pr CS3 on my old XP system. Maybe it was the beta of Sb or maybe it was the free stand-alone Microsoft Windows Media Encoder.
Anyway, a full uninstall and reinstall of CS3 will likely fix the problem, but I can't say for sure because I never got around to doing it. I used the MS Windows Media Encoder until I could load CS3 on my new system (dual-boot XP32 with Vista64).
EDIT: All is well with .wmv export on the new system. No CS4 on XP32 and no WME there, either.

Adobe media encoder export error "writer not found"

When trying to export to wmv using adobe media encoder I get an export error of "writer not found". I did a search and found others having the same issue with no fix as far as I can see. Just wondering if anyone has any more iformation on this. I'm using Vista Ultimate and Premiere CS3.
Thanks

I registered the WMEncoderHelper.exe file with regserv, but I still get
the "writer not found error". I wish I knew what codec it is trying to find and use.

BB protect: Error starting net_rim_bb_dryad_gui:Class 'net.rim.device.api.iui.theme.Themes$Writer' not found

Hello there.
I am using a blackberry curve 8520. It came with version 4 of the OS. I upgradede it yesterday, 15 feb to version 5. After the upgrade so far I am experiencing 2 technical problems.
1 is with the blackberry protect app. which when I launch give me this error message: BB protect: Error starting net_rim_bb_dryad_gui:Class 'net.rim.device.api.iui.theme.Themes$Writer' not found with an OK button.
2. When I enter the blackberry app world it give me the following message: A BlackBerry Idenity update is neeeded. Would you like to install it now ? yes/no. The problem here is, it never installs, tried it the whole day yesterday as I am still trying it now. I have rebooted the device, removed battery and sim several times. Still. This is what it give me instead. Blackberry idenity installation failed. Please try again later. (80003).
Sorry if I am askign basic questions but I am not a techy person at all. Thanks in advance,

Hi and welcome to the forums!
We need to fix your issues in reverse order.
The Blackberry Protect program requires a valid Blackberry ID to operate.
(To use BlackBerry Protect you must have the following items:
• BlackBerry® ID account
• Data plan from your wireless service provider)
I suggest we use KB29613 to fix the Blackberry Identity problem.
Once your Blackberry ID is established you can access Blackberry App World
and download the latest version of Blackberry Protect.
Let us know how it goes!
Thanks,
Bifocals
KB29613 The error "BlackBerry Identity installation failed. Please try again later. (80003)" is displayed within BlackBerry App World
User Guide - BlackBerry Protect
Security Note - BlackBerry Protect
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

EPM 11.1.2.3 ,Error 404 - Not Found

Hi All,
I am getting the following error after my installation and configuration of EPM 11.1.2.3 and when I try to access the Workspace URL.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol --
HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the
Request-URI. No indication is given of whether the condition is temporary or
permanent.
If the server does not wish to make this information available to the client,
the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code
SHOULD be used if the server knows, through some internally configurable
mechanism, that an old resource is permanently unavailable and has no forwarding
address.
I installed 11.1.2.3 in windows 7 ultimate OS and 64 bit and using sql server 2005 Database and configured Essbase,planning, hfm, arm, fcm,fdm ,hpcm, , everything was configured successfully but when I open the workspace URL it is throwing "Error 404 not found"
I tried accessing http://machinename:7001/console (I replaced machinename with my machinename)
even here I am getting the same error, but I checked the database and it has the table hss_component_types and it is populated with the various products.
could you guide me
Regards,
SG
The following is the error I am getting in C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services
<Jul 9, 2013 7:30:18 PM CDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Jul 9, 2013 7:30:18 PM CDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Jul 9, 2013 7:30:18 PM CDT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\audit-client.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\css.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ctg_custom.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ldapbp.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\opencsv-1.8.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\registry-api.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\wlpool.jar>
<Jul 9, 2013 7:30:18 PM CDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.2.5-50-153520-1.6.0_37-20121220-0844-windows-x86_64 from Oracle Corporation>
<Jul 9, 2013 7:30:47 PM CDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<Jul 9, 2013 7:30:57 PM CDT> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://SUBHASUBBU:7001.>
<Jul 9, 2013 7:30:57 PM CDT> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Jul 9, 2013 7:30:57 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jul 9, 2013 7:30:57 PM CDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Jul 9, 2013 7:30:58 PM CDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jul 9, 2013 7:30:58 PM CDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log00002. Log messages will continue to be logged in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log.>
<Jul 9, 2013 7:30:58 PM CDT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log is opened. All server side log events will be written to this file.>
OracleFileSSOWalletImpl.getWalletData: enter...
OracleFileSSOWalletImpl.getWalletData: System.getProperty(user.name)=SUBHASUBBU$
OracleFileSSOWalletImpl.getWalletData: locking (shared) dummy sso file..
OracleFileSSOWalletImpl.getWalletData: locking (shared) sso file..
Oracle Wallet: wallet size 8349
OracleWallet: getSecretStore
OracleSecretStore: loading wallet from stream
OracleSSOKeyStoreImpl: engineLoad
OracleKeyStoreSpi: Loading wallet from stream
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
Processing TP 0
Storing TP 0 as CN=Entrust.net Secure Server Certification Authority
Processing TP 1
Storing TP 1 as CN=Entrust.net Secure Server Certification Authority 1
Processing TP 2
Storing TP 2 as CN=Entrust.net Certification Authority (2048)
Processing TP 3
Storing TP 3 as CN=GTE CyberTrust Global Root
Processing TP 4
Storing TP 4 as OU=Secure Server Certification Authority
Processing TP 5
Storing TP 5 as OU=Class 1 Public Primary Certification Authority
Processing TP 6
Storing TP 6 as OU=Class 2 Public Primary Certification Authority
Processing TP 7
Storing TP 7 as OU=Class 3 Public Primary Certification Authority
OracleKeyStoreSpi: Storing Secret0
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret1
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret2
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret3
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Keystore Loaded
OracleWallet: getSecretStore
OracleFileSSOWalletImpl.getWalletData: enter...
OracleFileSSOWalletImpl.getWalletData: System.getProperty(user.name)=SUBHASUBBU$
OracleFileSSOWalletImpl.getWalletData: locking (shared) dummy sso file..
OracleFileSSOWalletImpl.getWalletData: locking (shared) sso file..
Oracle Wallet: wallet size 3941
OracleWallet: getSecretStore
OracleSecretStore: loading wallet from stream
OracleSSOKeyStoreImpl: engineLoad
OracleKeyStoreSpi: Loading wallet from stream
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
Processing TP 0
Storing TP 0 as OU=Class 1 Public Primary Certification Authority
Processing TP 1
Storing TP 1 as CN=GTE CyberTrust Global Root
Processing TP 2
Storing TP 2 as OU=Class 2 Public Primary Certification Authority
Processing TP 3
Storing TP 3 as OU=Class 3 Public Primary Certification Authority
OracleKeyStoreSpi: Storing Secret0
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret1
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret2
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret3
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Keystore Loaded
OracleWallet: getSecretStore
<Jul 9, 2013 7:31:19 PM CDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jul 9, 2013 7:31:19 PM CDT> <Notice> <Security> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\security\boot.properties>
<Jul 9, 2013 7:31:41 PM CDT> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of EPMServer0 has been migrated to backup server and the backup server is accessing the TLOG of EPMServer0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>
<Jul 9, 2013 7:31:42 PM CDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jul 9, 2013 7:31:42 PM CDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\access.log00002. Log messages will continue to be logged in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\access.log.>
<Jul 9, 2013 7:32:18 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jul 9, 2013 7:32:18 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Using OraclePKI Provider
javax.net.ssl.TrustManagerFactory supported
javax.net.ssl.KeyManagerFactory supported
Using OracleJSSE103 Provider
<Jul 9, 2013 7:32:21 PM CDT> <Warning> <JDBC> <BEA-001552> <The logging last resource (LLR) data source accountreconciliation_datasource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
<Jul 9, 2013 7:32:21 PM CDT> <Warning> <JDBC> <BEA-001552> <The logging last resource (LLR) data source financialclose_datasource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
<Jul 9, 2013 7:33:42 PM CDT> <Warning> <Security> <BEA-090668> <Ignored deployment of role "Admin" for resource "type=<url>, application=DMS Application#11.1.1.1.0, contextPath=/dms, uri=/">
<Jul 9, 2013 7:33:47 PM CDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'ACCOUNTRECONCILIATION [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false]..
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false].
at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
Truncated. see log file for complete stacktrace
>
<Jul 9, 2013 7:34:12 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'RuleService_AsyncRequestProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncRequestProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:34:12 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'RuleService_AsyncResponseProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncResponseProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:34:13 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\aps\AppServer\InstallableApps\Common\aps.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:34:13 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\APS_11.1.2.0\mizf54/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:35:15 PM CDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'FINANCIALCLOSE [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false]..
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false].
at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
Truncated. see log file for complete stacktrace
>
<Jul 9, 2013 7:35:44 PM CDT> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: com/oracle/adfm, Specification-Version: 1, referenced from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\FMADFWEB_11.1.2.0\nw1g9o]. Make sure the referenced optional package has been deployed as a library.>
<Jul 9, 2013 7:35:49 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'ActionsService_AsyncRequestProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncRequestProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:35:49 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'ActionsService_AsyncResponseProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncResponseProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:36:57 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\SHAREDSERVICES_11.1.2.0\dt7o9d\interop.war/WEB-INF/web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:38:12 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\odi\setup\manual\oracledi-agent\oraclediagent.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:38:12 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\oraclediagent\cn250y/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:38:12 PM CDT> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.bam.odi.library, Specification-Version: 11.1.1, referenced from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\oraclediagent\cn250y]. Make sure the referenced optional package has been deployed as a library.>
<Jul 9, 2013 7:38:13 PM CDT> <Emergency> <Deployer> <BEA-149259> <Server 'EPMServer0' in cluster 'EPMServer' is being brought up in administration state due to failed deployments.>
Hyperion Provider Services - Release 11.1.2.3.4408
Copyright (c) 1991, 2013 Oracle and / or its affiliates. All rights reserved.
connection mode : HTTP
essbase.properties: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0/bin/essbase.properties
java System properties -DESS_ES_HOME: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0
Mode: Non Fusion read from Registry
registry.isRegistryDatabaseCreated()true
Registry was initialized sucessfully
Component was found from component type DISC_MAN_PRODUCT
Updating version Disclosure_dbVersion with DISC_MAN_PRODUCT
Warning: Starting ADF Library jar post-deployment on WebLogic Server. Is "provider-lazy-inited" init-param missing from LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not being used.
Started: ADF Library non-ADFJspResourceProvider post-deployment
Finished: ADF Library non-ADFJspResourceProvider post-deployment (millis): 46
Essbase® Administration Services - Version 11.1.2.3.000.4415
Copyright © 1991, 2013 Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose other than the recipient's personal use, without the express written permission of Oracle.
US Patent Number 5,359,724
US Patent Number 6,317,750
Current time stamp: Tue Jul 09 19:38:54 CDT 2013
Server started successfully
Waiting for client requests
HRContextListener::contextInitialized
Warning: Starting ADF Library jar post-deployment on WebLogic Server. Is "provider-lazy-inited" init-param missing from LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not being used.
Started: ADF Library non-ADFJspResourceProvider post-deployment
Finished: ADF Library non-ADFJspResourceProvider post-deployment (millis): 203
- WEBLOGIC
null
- The AMHM configuration file path is..nullconf
- getting attributes for bsp.jsr: [Migration, Ant-Version, Manifest-Version, Created-By, Version]
- going to get value for Migration attribute
- Encryption Type : AES
- Invocation of generateSecurityFile Successful
- userName :
- ServiceID :
- applicationName :
- Configuration File (config.xml) does not exist under C:\Oracle\Middleware\user_projects\epmsystem1\Planning\planning1\config.xml Process aborted.
- Migration Failed
Utf8Filter: forceRequestCharacterEncoding set to true (init-param=true)
Utf8Filter: repairRequestParameters set to false (init-param=false)
Utf8Filter: rebuildPathInfo set to false (init-param=false)
Utf8Filter: revertRequestURI set to true (init-param=true)
Utf8Filter: settings are true/false/false/true
Initializing CORBA ORB.
CORBA ORB initialization complete.
Loading configuration from registry
WSBaseServlet.setDefaultGSMContext(): Servlet GSM context. host=192.168.204.1:6800
Log configuration: file:/C:/Oracle/Middleware/user_projects/epmsystem1/ReportingAnalysis/RAFrameworkWebapp/WEB-INF/logging.properties
<Jul 9, 2013 7:39:39 PM CDT> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Jul 9, 2013 7:39:39 PM CDT> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EPMServer.>
<Jul 9, 2013 7:39:44 PM CDT> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on fe80:0:0:0:0:5efe:c0a8:ed01:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[9]" is now listening on fe80:0:0:0:0:100:7f:fffe:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[13]" is now listening on 0:0:0:0:0:0:0:1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:c0a8:cc01:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:0:5efe:c0a8:7:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[12]" is now listening on 127.0.0.1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[8]" is now listening on fe80:0:0:0:3415:3499:e650:c29e:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[10]" is now listening on fe80:0:0:0:2d02:d309:55d5:a150:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[11]" is now listening on fe80:0:0:0:5894:d88c:c022:f32b:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.204.1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 192.168.0.7:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on fe80:0:0:0:c885:cffb:be7a:3e0b:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:1d4d:5292:d06b:f62b:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.237.1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EPMServer0" for domain "EPMSystem" running in Production Mode>
<Jul 9, 2013 7:40:09 PM CDT> <Warning> <Server> <BEA-002611> <Hostname "SUBHASUBBU", maps to multiple IP addresses: 192.168.204.1, 192.168.237.1, 192.168.0.7, fe80:0:0:0:c885:cffb:be7a:3e0b%18, fe80:0:0:0:1d4d:5292:d06b:f62b%20, fe80:0:0:0:3415:3499:e650:c29e%15>
<Jul 9, 2013 7:40:09 PM CDT> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<Jul 9, 2013 7:40:11 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Jul 9, 2013 7:40:11 PM CDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in ADMIN mode>
<Jul 9, 2013 8:11:16 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HSS_COMPONENT_TYPES WHERE 1 = 0" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:11:16 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM V8_VERSION WHERE 1 = 0" set up for pool "raframework_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:11:54 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,190 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:12:04 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,198 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:12:19 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on 0:0:0:0:0:0:0:1:54,216 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HSS_COMPONENT_TYPES WHERE 1 = 0" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM ARM_ATTRIBUTES WHERE 1 = 0" set up for pool "accountreconciliation_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM AIF_LOOKUP_MAPPINGS WHERE 1 = 0" set up for pool "aif_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM CALCMGRCONFIG WHERE 1 = 0" set up for pool "calc_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM DISCMAN_COUNTER WHERE 1 = 0" set up for pool "discman_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM SERVERLOGID WHERE 1 = 0" set up for pool "eas_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM FCC_USER_ATTRIBUTES WHERE 1 = 0" set up for pool "financialclose_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from SNP_LOC_REP" set up for pool "odiMasterRepository" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from SNP_LOC_REP" set up for pool "odiMasterRepository" failed with exception: "java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver]Object has been closed.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from SNP_LOC_REPW" set up for pool "odiWorkRepository" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HSPSYS_CLUSTER WHERE 1 = 0" set up for pool "planning_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HPM_APPLICATION WHERE 1 = 0" set up for pool "profitability_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:18:49 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,579 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:22:29 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,820 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:29:44 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:55,178 during the configured idle timeout of 5 secs>

First of all "I installed 11.1.2.3 in windows 7 ultimate OS", it is not a supported OS so if you want assistance problem solving you should stick with a supported OS.
It also looks like you have installed a whole range of products some requiring additional configuration and the requirement of SOA.
I recommend starting with a support OS and only install products that are required.
Cheers
John
http://john-goodwin.blogspot.com/

Cannot create Windows Media with PRE 8 - Writer not found

I have recently installed PRE 8 (paid single user) on my Windows 7 dual-core machine, and I have installed the 8.0.1 patch. I can import, edit and render video and audio just fine. I can save files as AVI and MPEG, but whenever I try to save a my movie as a Windows Media file, the rendering progress bar is displayed followed immediately by a pop-up entitled "Export error" with notification "Writer not found." I have reinstalled PRE8, turned of my antivirus, but nothing seems to resolve this problem. I cannot seem to find any remedy on the web. Anyone else experiencing this issue?

As I mentioned above I am running Windows 7 (omitted above: 64 Home Premium Edition). I have all updates installed, and I have verified I have latest device drivers. With regards to QuickTime, I am suffering from the accursed "Error 46: Could not load or fine Quicktime Active X control." So I am running withouy quicktime, but do I really need an Apple product to produce Windows Media?
I have tried to correct the Error 46 problem by using the "Subinacl/Reset" solution desribed in many places (e.g. http://research.gerger.com/?view=lab:en&aID=1006 under "Quicktime Annoyances"), but that solution isn't working for me. I can see that the issue is with registry priviledges -- no one can read the QT registry keys once QT is installed ("Insufficient Priviledge"). I suspect this solution isn't working, because I never installed an account named "administrator" on my machine, and it looks like the reset.cmd script assumes that you have.
I sure hope I don't need Quicktime to produce Windows Media, otherwise, I have spent a lot of money on a tool (PRE 8) that won't serve my needs.

Error:Can not found "javax/xml/soap"

Hi:
I'm fairly new to Java development and I'm trying to write a wrapper class that will access a webservice. The problem I'm running into is that I keep getting this error message when I try to compile my class:
./STest.java:1: error:Can not found "javax/xml/soap" [JLS 7.5.2, 7.6]
I've installed the jwsdb-1_2 and I think mh env is set up correctly.
The above error message is generated by:
import javax.xml.soap.*;
Please help!

I've searched every jar file and it doesn't seem as though any of them have the soap stuff....
This page, http://java.sun.com/webservices/docs/1.0/api/overview-summary.html, seems to say that I need the Web Services Developer Pack, which is was the wsdp is....

DADs on WLS 11g (version 10.3.6.0) do not work (Error 404--Not Found)

Actually we use Application Server 10g (version 10.1.2.3.0) for different Forms 10g Applications (roundabout 1000 Forms) and want to change to Forms 11g and Weblogic Server 11g (version 10.3.6.0). A Test-Application on the Weblogic Server works fine, but DAD’s do not work at all.
In Enterprise Manager 10g i can configure DADs within the GUI of the Enterprise Manager, where i can see, if a connection could be established or not.
In Enterprise Manager 11g Fusion Middleware Control this doesn't seem to exist anymore, so i tried to configure the DADs manually, but something has to be wrong or missing, because there is no connection to the database and the following error appears:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I added several DAD’s to /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/mod_plsql/dads.conf like this:
<Location /pls/jd-download-dev>
SetHandler pls_handler
Order allow,deny
Allow from All
AllowOverride None
PlsqlDatabaseUsername w_web_user_download
PlsqlDatabasePassword @BWKChfgPacV6yQL40lIKZqXUUA9wC4cmAw==
PlsqlDatabaseConnectString jddev TNSFormat
PlsqlNLSLanguage German_Germany.WE8ISO8859P1
PlsqlAuthenticationMode Basic
PlsqlDefaultPage w_anwendung.p_web_show_document
PlsqlAlwaysDescribeProcedure Off
PlsqlErrorStyle DebugStyle
</Location>
The passwords were obfuscated with dadTool.pl and the http-Server restarted with /opt/oracle/product/Middleware/asinst_1/bin/opmnctl restartproc process-type=OHS
The files /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/mod_plsql.cache.conf and /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/moduleconf.plsql.conf were left unchanged.
Our Test-Application generates the following link
'http://172.106.2.7:9001/pls/jddevdev/B_ARCHIVE.P_ARCHIVE_VIEW?docfid=200'
that seems to be ok, because when i replace IP and port with our old IAS it works fine, but the WebLogic Server generates the above mentioned error.
To get some more information i searched an error_log in /opt/oracle/product/Middleware/asinst_1/diagnostics/logs/OHS/ohs1 but there isn’t any.
I used the following Documentation for configuring the DADs which is for HTTP Server 11g Release 1 (version 11.1.1), because I could not find one for version 10.3.6.0:
http://docs.oracle.com/cd/E23943_01/web.1111/e10144/under_mods.htm#i1055269
So probably there are differences between configuring version 10.3.6.0 and version 11.1.1 and so something is wrong configured or missing...
Thank you in advance for your help
Udo

Hi Raj,
it is a Sparc Solaris 10
and yes that's my enviorment.
After some more tests it's seems it's not a real bug but no realy nice working solution.
Eclipse uses for all instances the same secure storage, where OEPE also saves the password.
And if I look right the pasword was saved without the user context, so if you use an other user he takes the same password from the old user.
and I doesn't know how do OEPE check the connection in reality or only reply the last failed login message.
After deleting the complete secure storage and test it again with the juno version it works well.

Why does FCP error "File Not Found" when I try to open my sequences????

I recently updated all of my software and the following day I started getting errors "file not found" when I would try to open a sequence. Now all of my sequences are being lost and I am losing time and money because I can't meet deadlines! This *****!!! With one sequence I had to reedit the entire thing from scratch and when I did for some reason the old one would then open. But the next time I opened FCP both sequences would error out. Following the "file not found" the computer responds with another error "error: out of memory" What the devil is going on with this crap?

I seem to have figured out what my problem was. After trying to build the same project (that failed on the Mac Pro) on my laptop and encountering the same errors, I realized that the problem had to be with one or more of my assets and not my new version of FCP, since my PowerBook is running FCP 5.0.4 and my Mac Pro is running FCP 5.1.2.
In my case the "corrupt" file was a Photoshop PSD file. In the past (FCP 4.5) I was able to use PSD files with hidden layers. I would merge the visible layers into one layer, keep the hidden layers and save the file. Once in FCP, I imported the PSD file and kept right on truckin'. I've done this for years. For some reason now with FCP 5.1.2 (and 5.0.4), that's not flying anymore. Once I "Flattened" the PSD file in Photoshop (deleting all of the hidden layers) I was able to build the project without any errors.
Interestingly, the technique I used to figure out which file was "corrupt" also allowed me to salvage parts of some of my "lost" sequences. I saw this posted in a forum at Creative Cow (creativecow.net). Basically, I opened up the project, clicked the OK button after the File Not Found error, went into the Browser, right clicked on the offending sequence, selected "Make Offline". When I double clicked the sequence it opened in the timeline with all of my assets offline. Then in the timeline, one by one, I right clicked on each clip and selected "Reconnect Media". Once I linked up the media, if I didn't get an error message, I would save as a new project (to salvage what WAS working), and go to the next clip. I did this until I found the offending PSD files.
I hope this helps. Now it's time to play "catch-up"
Mac Pro 3Ghz, 1GB RAM, ATI Radeon X1900 XT Mac OS X (10.4.8)

[SOLVED] == ERROR: file not found: `/sbin/dmsetup'

[EDIT] A much simpler way to deal with this is to explicitly ignore the kernel update during a full system update:
pacman -Syu --ignore linux
Then explicitly update the kernel alone:
pacman -S linux
[EDIT] First, after a full system update I had to move the STUB kernel image from the UEFI directory back to /boot, them recreate the images a second time. The systemd service moved it back to the UEFI directory.
[EDIT] The use of 'mdadm_udev' in HOOKS= also seems to be no longer just 'preferred' to the 'mdadm' hook but instead is now mandatory.
I've read the news item...
Changes to LVM
2013-02-12 - Thomas Bächler
With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
The lvm2 initramfs hook now requires the udev hook.
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
The lvmwait kernel command line option is no longer needed and has no effect.
If you run pacman -Syu and update device-mapper, linux and lvm2 at the same time, you will get an error message that /sbin/dmsetup is missing. Run mkinitcpio -p linux again after the update to avoid any problems.
...and I do get the message...
==> ERROR: file not found: `/sbin/dmsetup'
...but after a full system update with...
pacman -Syu
...when I execute...
mkinitcpio -p linux
...this is what I get...
Building image from preset: 'default'
/boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
Building image from preset: 'fallback'
/boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
So of course if I reboot I get the dreaded 'No volume groups found' message.
I should mention that I use the systemd path and service to move the kennel after it has been updated.
Last edited by KairiTech (2013-04-07 02:45:12)

With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
The lvm2 initramfs hook now requires the udev hook.
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
The lvmwait kernel command line option is no longer needed and has no effect.
Just to confirm. You did all these steps, right?
EDIT: I just noticed something:
KairiTech wrote:HOOKS="base udev autodetect sata mdadm usbinput keymap encrypt lvm2 filesystems timestamp shutdown"
Replace
mdadm
with
mdadm_udev
. Maybe this is nothing, but it is recommended to use this one instead of the other.
NEW EDIT: Expecially this one
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
Last edited by s1ln7m4s7r (2013-03-24 20:42:55)

Error File not Found in CS 5.5

When I go to open up PP CS 5.5 it provides a list of possible projects I can open up. Click on a project and it opens accordingly. However, over the past 2 days it has become problematic. I can click on the listed project but I now receive an error message: Error file not found. PP will not open up. I haven't moved any files, folders or projects around. I have simply closed the project, quit PP and then opened it again when wanting to edit. I have tried opening up the auto saved project file and I receive the same message?

Hi Todd both your solutions (and the one suggested by Colin) works initially. Dbl click the project file and it opens PPro. However, I tried this on another project which has a 3rd party pllugin (Smartsound Sonic Fire Pro) in it. Things get interesting with Smartsound being activated with me unable to quit out of it and I am not able to access Premier Pro. I have to Force Quit both programs. Then when I try to dbl click on the program that opened up OK the error message returns: File format not supported. There is no Smartsound file involved in this project? Same thread? New thread? many thanks for your responses

[solved] 'ERROR: file not found:' when running 'mkinitcpio -p linux'

$ sudo mkinitcpio -p linux
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: smsmdtv
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
Things seems to work, but I'm a bit worried.
It has just started. PS/2 atkbd stuff went fine.
journalctl shows
Feb 26 22:36:09 localhost systemd-udevd[62]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[63]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost systemd-udevd[64]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[65]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost kernel: sda: sda1 sda2 sda3 sda4
Feb 26 22:36:09 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Feb 26 22:36:09 localhost systemd-udevd[66]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[67]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export
I'm using [testing] but I don't know if it matters.
What should I post?
Last edited by karol (2014-03-15 15:03:56)

The systemd build hook looks like this:
build() {
local rules unit
# from base
add_binary /bin/mount
add_binary /usr/bin/kmod /usr/bin/modprobe
# systemd
add_binary /usr/lib/systemd/systemd /init
add_binary /usr/bin/systemd-tmpfiles
# generate sysroot.mount and sysroot-usr.mount
add_file "/usr/lib/systemd/system-generators/systemd-fstab-generator"
# udev rules and systemd units
map add_udev_rule "$rules" \
50-udev-default.rules \
60-persistent-storage.rules \
64-btrfs.rules \
80-drivers.rules \
99-systemd.rules \
map add_systemd_unit \
ctrl-alt-del.target \
initrd-cleanup.service \
initrd-fs.target \
initrd-parse-etc.service \
initrd-root-fs.target \
initrd-switch-root.service \
initrd-switch-root.target \
initrd-udevadm-cleanup-db.service \
initrd.target \
kmod-static-nodes.service \
sockets.target \
[email protected] \
systemd-journald.service \
systemd-tmpfiles-setup-dev.service \
systemd-udev-trigger.service \
systemd-udevd-control.socket \
systemd-udevd-kernel.socket \
systemd-udevd.service
add_symlink "/usr/lib/systemd/system/default.target" "initrd.target"
# libdbus needs the passwd info of the root user
# TODO: make sure this is no longer necessary when systemctl moves to sd-bus
add_file "/etc/nsswitch.conf"
add_file "/etc/passwd"
add_binary "$(readlink -f /usr/lib/libnss_files.so)"
# udev wants /etc/group since it doesn't launch with --resolve-names=never
add_file "/etc/group"
Do all of those files exist on your sytemd? I'm not running testing nor systemd in my initrd, so I can't do much checking.
Edit: You're not the only one. Bug report: https://bugs.archlinux.org/task/39059
Last edited by Scimmia (2014-02-27 06:59:55)

Error: file not found

Hello,
I am using a labview program which already exists. The program
inputs a file ( txt file with some numerical data) and gives the output
file at the required location after performing some calculations to it.
The problem is when I input my file path and run the program it always
gives an error ' file not found'. Please help me.
Thanks
Laxmikanth

Hi Laxmikanth,
Some more info would be helpful. Such as posting a image of your program, which version of labview, platform etc.
that being said if you are literally typing in the filepath that is the most likely source for the error. Is there a browse button visible to the right of the filepath control? If not try right clicking and under the visible menu make sure the browse button is selected. Then click on the browse button and find/select your disk file. Now run the program and see if you get the same error.
Cheers,
--Russ

Error : file not found in SharePoint 2010

I have a problem of error "file not found" in a site collection SharePoint 2010.
    I cannot access to home page, the page of list/library/permission,etc. All pages will appear an error "file not found"
    I can access to the page of "all content"
    I can access to the site setting page, but I cannot open the link on this page. For example, I select "quick launch" in "Look and feel" section, it will show an error "file not found".
    I think I must reset my master page, but I cannot use SharePoint Designer (forbidden in my application), I cannot open the link on site setting page, and I cannot open library page to check the master page
    I can access to mobile view, and all pages work well in mobile view, but I did not find site setting page
How could I check the master page? Or this problem has other solution?
Thank you in advance.

You might have referred an image or style sheet or some file from an invalid path. Check the error in detail, where you might be able to know which file or file path is not correct. Then recorrect it in the master page and then refresh the site.
UPDATE - Can you configure the web.config to display the detailed error? Make -
<CustomErrors Mode="Off">, CallStack="true" and
<compilation debug="true" />
Do an IISReset and then refresh the site.

BAPI_SALESORDER_CHANGE: Error-Item not found

Hi,
I am calling BAPI_SLESORDER_CHANGE from an enhancement in the include MV45AF0B_BELEG_SICHERN. This will be called after the commit work of sales order. Im using this BAPI for the purpose of changing/updating the Inquiry line item from which the SO is created.
When I execute the BAPI in SE37 by passing the Inquiry no. & item to be updated, it is not giving any error. In my enhancement, I am passing the same values but getting the error: ITEM NOT FOUND.
When I debugged the BAPI, the error is raised in the Fm SD_SALES_ITEM_READ.
In the below code in FM, VBAP is getting filled inside the PERFORM VBAP_BEARBEITEN_VORBEREITEN but when it comes out of this subroutine, the VBAP is initial.
But when executing with SE37, this VBAP value is not getting cleared after the subroutine.
PERFORM XVBAP_LESEN_DIREKT_SVBAP(SAPFV45P) USING ITEM_NUMBER.
PERFORM VBAP_BEARBEITEN_VORBEREITEN(SAPFV45P).
EVBAP = VBAP.
Please help me out to resolve this issue.

Yes,
but in sales order creation you are going thru a different code:
* Anlegen <= Here from sales order creation
IF SVBAP-TABIX = 0.
    CLEAR: MAEPV,
            MAAPV,
            MTCOM,
            XVBUP,
            XVBAPF,
            KONDD,
            XVBAP.
     *VBAP = XVBAP.                    " Getuntes clear
    HVBAP = XVBAP.                     " Getuntes clear
     *HVBAP = XVBAP.                   " Getuntes clear
    VBAP = XVBAP.                      " Getuntes clear
     *MTCOM = MTCOM.                   " Getuntes clear
    MOVE-CORRESPONDING XVBAP TO VBAPD. " Getuntes clear
     *VBAPD = VBAPD.                   " Getuntes clear
    CLEAR: HVBKD, *HVBKD.
* Steuerflag für Textverarbeitung initialisieren
    CLEAR NO_TEXT_COPY-ITEM.
    clear no_text_copy-check.
ELSE.
* Ändern <= Here from SE37
    VBAP = XVBAP.
It's a completely different behaviour!
Regards,
Klaus

"Error: writer not found"

Similar Messages

Maybe you are looking for