Error writing to field point

I am trying to connect Field point FP-1001 by Ni PCI-485/2 multifuction adaptor . when i start the program by Ni scope i found " ERROR WRITING TO FIELD POINT".
i have checekd the pci card and its setting is quite Ok. the picture attached for referance. please help .
Attachments:
image001.jpg ‏9 KB
image002.JPG ‏33 KB
image003.JPG ‏34 KB

Dear Shane,
Thanks for yor response. I have tried again yesterday and rectify the probelm. The confilect was between PC port 485 confirgration setting and VISA configration setting. First i treid to change setting but failed to change then i again install all the program again and tried to change the setting.this time i got successs. i per you question the driver and PCI card was installed properly.
Thanks again.
Regards,
wajid
Shane-C wrote:
Ok, if it worked on that system before, you should be able to get it working again. Does your PCI card show up properly in NI MAX? Can you upload a screen shot of the device there? Do you have an option in MAX to send a command to the FP-1001 and see if the communication was established properly? How does your PCI card show up in the Windows Device Manager, any exclamation points indicating that the device driver is not installed or recognized?

Similar Messages

Error on compact field point cfp-1808

hello,
why compact field point cfp 1808 not comunicate with lookout field point driver?
i set ip adress yak file and lookout crash. i have on the fieldpoint 5.1 firmware.

What do you mean by "crash"? Any alarms or errors? If possible, please provide some screenshots.
Which version of lookout?
Is everything working with 1808 in MAX?
Please delete all 1808 related configuration in MAX, and let it find 1808 again. Find devices, and save the .iak file. Then try Lookout. Tell me if you can reproduce the "crash" each time you do this.
Ryan Shi
National Instruments

Unable to Build VC++ application it showing error 1 LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib' but I am Using Measurement Studio 2009 ,NI DAQ 7.01 and Field Point 6.05.

I am having a application in Visual Studio 2003 on Windows XP , Now I am Migrating the application in Visual Studio 2005 on Windows-7 .
In my Development PC , I was install Measurement Studio 2009 , NI DAQ 7.01 and Field Point 6.05.
my application is Showing following error:
Linking...
LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib'
Build log was saved at "file://c:\EdacsNt\Source\SaftyServices\NICfpDAQDl?l\Debug\BuildLog.htm"
NICfpDAQDll - 1 error(s), 0 warning(s)
When I copy from NiFieldPoint71D.lib library from Measurement Studio 7.1 and put in :\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib.
my application is Showing following error:
1>Linking...
1>atlsd.lib(atltrace.obj) : error LNK2005: "unsigned int (__stdcall* ATL::g_pfnGetThreadACP)(void)" (?g_pfnGetThreadACP@ATL@@3P6GIXZA) already defined in NiFieldPoint71D.lib(StdAfx.obj)
1>atlsd.lib(atlbase.obj) : error LNK2005: "class ATL::CAtlWinModule ATL::_AtlWinModule" (?_AtlWinModule@ATL@@3VCAtlWinModule@1@A) already defined in NiFieldPoint71D.lib(StdAfx.obj)
1> Creating library ..\..\lib\debug\NICfpDAQDll.lib and object ..\..\lib\debug\NICfpDAQDll.exp
1>..\..\bin\debug\NICfpDAQDll.dll : fatal error LNK1169: one or more multiply defined symbols found
I want to ignore NiFieldPoint71D.lib from using project setting(Linker->Input->ignore Specific Library ) but still it is showing same error.
In the project Setting I am done following setting:
"C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"
C:\Program Files\National Instruments\NI-DAQ\Lib"
Linker->Input->ignore Specific Library: mfcs71d.lib;libc.lib;'NiFieldPoint71D.lib
Please provide some solution.
Thanks
Nityanand

You posted this in the LabVIEW forum.
Are you programming in LabVIEW?
There is a separate Measurement Studio for VC++ forum. http://forums.ni.com/t5/Measurement-Studio-for-VC/bd-p/231

How can I get all the options of Field Point Explorer 3.0.2 in Measurement and Automation Explorer 3.1?

I am a student using LabVIEW and Compact Field Point to implement a
senior design project in Electrical and Computer Engineering. We
have LabVIEW 7.1 and a cFP-2020 and additional modules. We are
trying to use the CTR-500 module to output a pulse train to drive a
stepper motor. We have found instructions online of how to do
this, but they all use Field Point Explorer. The instructions
make use of options in Field Point Explorer that are not included in
Measurement and Automation Explorer (the software included with the
cFP).
I have downloaded Field Point Explorer 3.0.2 and followed the
directions. Now, in LabVIEW, when I using the newly created .iak
file, I get a dialogue asking to find the SubVI: 'FP Read (Float Array
-IO).vi'. Included with LabVIEW are subvis for FP Read, but not
with the float array part. So I figure I cannot use Field Point
Explorer created .iaks with LabVIEW 7.1. So how cannot I access
the same options in Measurement and Automation that I was able to find
in Field Point Explorer?
Thanks

Hi,
FieldPoint Explorer is no longer used to configure FieldPoint systems. However, I do not think that the configuring your system in FieldPoint Explorer is causing the error.
FieldPoint systems are now setup in Measurement and Automation Explorer (MAX). Information on setting up FieldPoint systems in MAX can be found in the MAX help under: Installed Products>> FieldPoint. Also, I recommend upgrading to the latest FieldPoint driver and version of MAX. The FieldPoint VI's will be slightly different when you upgrade, so there is a good chance that this will eliminate the error.
Regards,
Hal L.

I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll

I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
tt2

Error in ALV : Field Does not exists in Output table .

Hi All,
In my ALV report, program get dumped and showing error when i tried to put a col named Distribution channel ion the alv.
I have put the Distribution cannel field in the IT_FInal table , but still getting folwong errors :
Error : Field Symbol is not been assigned.
As Instructed i have passed I_INTERFACE_CHECK = 'X'.
By this i am getting detail error that :
Field Distribution channel does not exists in Output table & Heading for List is missing .
But i have maintained the distribition channel in IT_Final table
Please suggest wheather we have to define dis channel in any other place.
Thanks in advance.
Can any one help me regrarding this.
Thanks in advance.

Hello,
You have to populate the same in the fieldcatalog as well, i think you have not maintained this field there.
BR,
Suhas
PS: Also make it a point to follow-up on your previous post: [Error in ALV : Field Symbol not been assigned.|Error in ALV : Field Symbol not been assigned.]

Can FTP-access to field point log file interrupt the running program?

Can FTP-access to field point log file interrupt the running program?
We have a problem where our factory process control program on a Field Pointer suddenly stops the process. We are running the development system on a PC, wich deploys the program on the Field point, with user interface on the PC. Quite often the process stops for no apparent reason. I'm not sure right now if the control program on the Field Point is still running or if it stops. We use FTP from a distant PC (over VPN) directly to the Field Point to check if the process is running, by looking for date and size of log files produced during running process. I've never opened och copied any log file during process run, because this I'm sure this would cause problems for new log entries to be written. But can the mere looking at the log folder via XP-pros ftp-functionality cause the Field Point to have problems writing data to a log file?
I'm not sure how windows XP pro handles "my network places" when it comes to FTP, it look that it keeps some kind of local copy of the folders, or at least the files opened.
Next version of the program will have only basic functionality on the Field Point, leaving logging etc. to another program on the PC, but right now we are stuck with this system.
Ola A

It turned out that the problem lies in the harware of the production machine, it was not a labiew-program problem at all!
Ola

Error writing output with iview for xml form builder

Hi,
I created a Xml Form Builder's project in which I developed an "Edit" and "ListEdit" sheet.
I also created an iview for theese in which the code link is:"com.sap.km.cm.xmlform",and the field for Style Sheet for List and for single item are set up correctly,but when I tried the preview the following error message happened:
com.inqmy.lib.xsl.xslt.XSLOutputException: Error writing output. -> org.w3c.dom.DOMException: Root Element is already present, cannot be appended as a child.
could someone help me?
thank's a lot!
Nick.

Hi,
Now I'm confused,what do you mean with create new data? Are users editing existing documents
(as if they go to a document example.xml > edit) or they are creating new documents (as if they go
on folder > new > forms)?
The problem is, in both cases a user would need read/write permissions.
The normal flow content (data) is created in KM is as follows:
1. user is assigned to a role
2. role contains KM Navigation iView
3. KM Navigation iView executes com.sap.km.cm.navigation component
4. user chooses New > Form UI command (edit_xml_forms)
5. edit_xml_forms UI command executes its code (com.sapportals.wcm.rendering.uicommand.cm.UIXMLFormsCreateCommand) and open xml edit for the user
6. user fill the form and click Save, form is created into folder
For what I understood so far, your requirement basically asks you to go directly to step 5, it is
possible to pass a URL that goes directly to step 5, the UI command button, but if you do that
you won't have a context, so chances that it will work are slim, since a context is required to
fill the parameters asked by the app (like folder, user, permissions, etc). Even though, in some cases you can
still pass the parameters via post in the URL but you must know which service/parameters the
app asks for it, also a URL is static...
That was the create scenario, I think it's more cons than pros, users would still be
able to bypass the URL iView created for that, I'd suggest evaluating again if it's really
a problem having users access cm to manage data
kind regards,
Rafael

Distribute measurment studio application with opc conntection to field point

I have written an Measurement Studio application with an DataSocket connection to an OPC Sever of an field point 1808. If I distribute this application to another computer I can't get a connection to the OPC Server of the field point. The application works fine on the developent computer of the application. On the other computer is just installed the MAX and the drivers from the Field Point CD. As well I configured the Field Point on that computer. We I browse for an OPC tag in the distibuted application I am not able to access any OPC server, even if I see them. Does anybody have an explanation for that?
Thanks Bernd

Hi Daniel,
sorry that i answer you so late. I got an error like "opxproxy.dll could not be found". So meanwhile I checked the system and the opxproxy file was found in the "winnt/system32" directory. After i register the opcproxy.dll manually with the shell command " regsvr32 opxproxy..dll" everything was working fine. Normally, this file should register itself automatically.
Bye
Bernd

Digital Potentiometer control in Labview with Field Point Unit

Hi..
I need some help on programming the LABVIEW to control the digital potentiometer.
It is AD7376 which 4 channels are used to control the digital potentiometer, and Field Point Unit FP-DO-403 thr. RS232.
– Channel 0 (POT_D), Channel 2 (POT_CS), Channel 3 (POT_Clk), and Channel 7 (POT_R).
-SDI (serial data input) contains 7 data bits. The first is the MSB.
-ClK provides the correct time reading the serial data.
-CS (chip select) only allows the reading of the data. CS is on 0 during the loading. POT-CS is used when 7 bits data is finish loading.
- POT_R is used as CLEAR.
After the calculation depending of the different conditions, 7 data bits data is created and changed to the opposite numbers (1-->0, 0-->1).
For example; if the calculated binary number is 1001011, the the output 7 bits data is 0110100
so Those data has to go to SDI (Channel 0 (POT_D)) starting from 0110100 and for each bit CLOCK has turn on and off to shift the bits controlled by Channel 3 (POT_Clk).
For example,
0 ---> POT_D then POT_Clk -->On/Off
1---> POT_D then POT_Clk -->On/Off
0---> POT_D then POT_Clk---> On/Off
Can this be done automaticaly? Could you help me on this?
I was able to program it until producing 7 binary bits (refer to the attached file) but by Giving 7 different bits at once to ONE channel, I get error..
Message Edited by Black Comb on 11-01-2007 08:51 PM
Message Edited by Black Comb on 11-01-2007 08:54 PM
Attachments:
AD7376toBIN44.vi ‏49 KB

Black,
Here is a concept for how to do it. Did not have time to look at data sheet for IC but this should be a good starting point.
Attachments:
Create inverted 7Bit Array.vi ‏19 KB

CS6 "There was an error writing metadata" message PC and Mac

I have seen this in the forums but looks like no one has an answer yet. Adobe chat support was totally not helpful.
I am getting an error message when trying to apply keywords to some images in Bridge. The error is very non-specific, all it says is "There was an error writing metadata to "filename.ext"". This happens when trying to apply keywords to a batch or single images. If not all images in the batch are error-prone, keywords are applied to those images and I get the error message for each image that had a problem.
My version is CS6 5.0.2.4 x32, but my co-worker downloaded a free trial today for her PC and is having the same problem. Another co-worker downloaded to his Mac and has the same issue. I am on a windows machine.
Sometimes one co-worker get the error message on an image, and I am able to tag thje image without error. Other times, none of us are able to tag the image. The images were not made by the same camera and come from different sources.
We are all administrators on our computer and have tried opening Bridge with "run as administrator". We still get the error.
The images are on our local machine, not a shared network drive. Some of the images did live on a shared network drive at one point, but not all. We can't seem to find a pattern between the files this is happening with.

That sounds like a problem with your machine, perhaps not enough Ram, a hard drive going south, a permissions issue, etc.
BOILERPLATE TEXT:
Note that because this is boilerplate text, not all points may apply to any given, specific poster.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Error Writing Metadata thumbnail icon, why is this?

When I take a layered TIFF file from my Lightroom 3 photo library and make creative changes to the file in Photoshop CS5, when I save the file, close it and return to Lightroom, the image thumbnail in the Library Grid mode displays a warning exclamation point. Hovering over the icon displays the tooltip Error Writing Metadata. Can anyone tell me why this is happening and how to remedy the situation the right way?
Clicking the warning (exclamation point) icon present two options: "Import Settings from Disc" or "Overwrite Settings"
Thanks in advance
Doug

I found a pattern, this happens when I open and edit the file with gedit. Even when I am very carefully just push the del button. Mabe gedit add some inviseble chars when it saves.

Error writing to file when updating Itunes Windows 7

Error message: C\Program files (x86) Common Files\Apple\Mobile Device Support\AppleMobileDeviceHelper.resources\clientdescription.plist MAKE SURE YOU HAVE ACCESS TO THAT DIRECTORY.
HELP!!!

I don't know where to go from this point, but I threw caution to the wind and double-clicked iTunes Windows Installer Package. It went to work until I got another error message: "Error writing to file: C:\Config.Msi\1279ed.rbf. Verify that you have access to that directory."
Are you running Kaspersky security software on that PC? I tend to identify that message with Kaspersky interfering with the install.
If there is Kaspersky on board, we should try some general-principles getting-past-security-software-interference troubleshooting.
Download and save a fresh copy of the iTunesSetup.exe (32-bit installer file) or iTunes64Setup.exe (64-bit installer file) to your Hard drive. (Don't run the install on line, and don't start the install just yet.)
http://www.apple.com/itunes/download/
Restart the PC. After the PC restarts do not open any applications. Disconnect from your network and/or the internet. Now switch off all your security software (firewall, antivirus, antispyware).
Now start the install by doubleclicking the iTunesSetup.exe (or iTunes64Setup.exe) file you downloaded earlier.
Reenable all security software prior to reconnecting to your network and/or the internet.
Any better luck with the security software shut down?

Please help with "Error writing the project file. The specified module could not be found." error.

I am a student. I've been trying to install and use Visual Studio 2013 Professional for three weeks now and I cannot get it to work. I am now two weeks behind in my Visual Basic class. I've installed, uninstalled, ran the repair option...
I've tried everything I know how to do. I just spent 45 minutes on the phone with Microsoft, was transferred four times and finally told I will have to use the forums to find an answer. I'm almost completely out of patience with this.
I got the software through the Dream Spark program as a student. I installed it with the web installer and it appeared to install fine. When I try to create a new project, I get the error: "Error writing the project file. The
specified module could not be found."
When I exit the application, I also get: "The automatically saved settings file 'c:\users\user\documents\visual studio 2013\Settings\CurrentSettings-2015-02-02.vssettings' is not available for write. You can change this file on the 'Import
and Export Settings' Tools Options page."
Please tell me you can help.

Hi,
could you please try the points mentioned here:
http://social.msdn.microsoft.com/Forums/en-US/vssetup/thread/0376db8f-4761-4ae5-9af2-98c53216318a#VS_IDE_unexpected_problems to eliminate the possible cause of your issue?
Please update the result in the forum after you try the method above!
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Field Point FP-1000 communication issue - Device found but offline in MAX

Hello,
I am trying to control several field point PLCs in a level tank. They are communicating through a FP-1000 module. I am able to add the devices through a configuration file in MAX. But there is an error saying " The device is offline. Make sure the device is connected and its power is on. " All of the field point PLCs have green light on for both " Power" and "Ready". I am not sure what the issue is here. I am using Labview 2014 and Field Point , VISA drivers are installed. Please see attached pictures for details.
Many Thanks
FLiu
Attachments:
IMG_1359.JPG ‏4812 KB
IMG_1360.jpg ‏2220 KB
IMG_1361.jpg ‏2251 KB

Thanks for your reply. I installed the most updated version for both ones. It turns out the configuration file for FP-1000 bank points to the wrong COM port for the Serial communication. I am able to communicate with the system now. I do have another problem through. I only have excutable labview files and a configuration file for the control system that I am working with. The original VI project file were lost. After importing the right configuration file in MAX, I installed the excutables and tried to run it. There is no response at all.The labview only last a few seconds and stopped. Any thoughts are greatly appreciated.
Thanks
Fliu

Error writing to field point

Similar Messages

Maybe you are looking for