Error : "Wrong Digital Signature for Addon Installer"

I'm having some problems at the time of installing any kind of addon in sap B1
Everytime I'm having an error -
"Wrong Digital Signature for Addon Installer"
even when I'm adding SCREEN PAINTER

Hi
This error could be cause by a versioning or corrupted installation:
1. For the version please check if you have another add-on installed with the same version like 2.1.2 (try to change it add-on file and try again)
You can also try to change the add-on installation order (in case of you have another add-ons installed).
2. If checking the version does not help please check those notes on How to clean client after corrupt installation of addon and also Re-registering the UI.                                                                               
808354 UI Server is not loaded with SAP Business One client        
819501 How to clean client after corrupt installation of addon     
Paulo Calado
SAP Business One Forums Team

Similar Messages

  • Wrong digital signature for Add-on

    I have just upgraded to 2004 (patch 5). My Add-on is installed (finally) and is successfully loading (finally)when SAP B1 is launched. Whenever I re-compile my Add-on for development and replace my Add-on exe I get the error "Wrong digital signature for Add-on" when SAP goes to load the Add-on again.
    I cannot successfully create my .ard file without a digital signature for the Add-on .exe (even though the documentation says it is optional).
    How can I test my Add-on in development mode if I have to re-create the .ard file and re-install the Add-on everytime I re-compile?? This does not seem correct.
    Please advise. Thanks.

    I found a solution to this problem.
    We were not debugging in development mode properly.

  • Wrong digital signature for add-on installer

    I have created a addon and it gives error as,
    Wrong digital signature for add-on installer  
    When I tried installing this addon on another SAP server,it worked.On the problamatic server,the antivirus has expired.Is virus capable to creating this problem ? I have tried all the options for solving the problem such as,
    1.Delete the temporary files.
    2.Delete the SBO files.
    3.Create a new addon and release it.
    4.Create a new addon with different name.

    Hi Dilip,
    Refer This...........
    Link: [url] Wrong Executable Digital Signature for Add-on
    Link: [url] SAP Business One AddOn Installer
    Link: [url] Wrong digital signature for add-on installer
    Link: [url] Wrong Digital Signature...
    Thanks
    Shafi
    Edited by: shafi_sunshine on Aug 18, 2011 7:21 AM

  • Wrong Digital Signature for Add-on - After Install - When Start Add - on

    Hi there,
    I have created Addon Installer with the B1DE Installer Setup. After that also use batch file AddOnRegDataGen.bat to Generate Ard File.
    After I addon install successfully, BUT when I want to Start it , It Prompts message
    "Wrong Digital Signature for Add-on."
    I do not know more what to make, already I read all the answers of the SDN and I did not solve the problem.
    I am losing the hopes. Please Help!
    Thanks a lot!

    Hi
    Try editing the AddOnRegDataGen.bat and changing the version number to corellate to the setup executable you have created and then execute the batch file to recreate a new ard file.
    Regards
    John

  • Error:Wrong Executable Digital Signature for Add on.

    Hi,
    We we are starting ALL Add on's we are Getting Error; Wrong Executable Digital Signature for Add on . Before Also we got Same Error After that We Uninstall All Add -ons and Freshly we Installed from Partner Portal and Installed. after That Alll Add os it's working OK there is no Error yesterday.but today i login my server it's shwoing Same Error; Wrong Executable Digital Signature for Add on.
    I Checked Digital Signature AddOnChk in SARI Table Under SBO and adddonsig Under Under .ard file in Installer Package. Both are Same. How we Can Solve this issues Please Advise.
    AA_Application runs without Mandatory AddOn
    SAP Note:925984
    See this Link for Wrong executable digital signature for Add-on[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000925984|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000925984]
    Symptom
    After changing a Mandatory AddOn's executable, without updating the ard file, the error message "Wrong executable digital signature for Add-on" is generated. However the application continues to work normally.
    Other terms
    AddOn, SAP Business One, Mandatory, continues, ard, Wrong executable digital signature for Add-on
    Reason and Prerequisites
    Bug
    Solution
    This issue will be fixed in a 2005A SP1 patch, please refer to the info.txt file on the Service market Place to confirm if the fix was included.
    Can any one Guide me on this Note ? How we can solve this issues.
    Regds,
    Samapth Kuamr Devunuri.
    Edited by: sampathdevunuri kumar on Nov 8, 2008 6:15 AM
    Edited by: sampathdevunuri kumar on Nov 8, 2008 6:18 AM

    Hi,
    The runtime error can be caused by a corrupt installation.    
    I am attaching 2 notes for you to go through.                 
    How to clean client after corrupt installation of add-on and also Re-registering the UI.    
    [808354|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=000808354] UI Server is not loaded with SAP Business One client        
    [819501|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=000819501] How to clean client after corrupt installation of add-on                                
    Please follow the steps in [819501|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=000819501]  to make your machine clean and then install the add-ons again.
    If you are still experiencing problems please try the following: 
    - Backup the SBO Common                                          
    - Re-run Upgrader Common from patch                              
    Result is a new SBO common with a new SARI.        
    hope it helps,
    Regards,
    Ladislav
    SAP Business One Forum Team

  • Add on XL reporter : Wrong executable digital signature for Add on

    Hi Experts,
    I have a client who gets this error 'Add on XL reporter : Wrong executable digital signature for Add on' when they try to login. They are on 2007A PL45. This happens on the server as well as on clients. Uninstalll and reinstall of client didn't work.  We had a look at the AddonLocalRegistration folder to see if XL reporter is registered but can't see any.
    I have found a similar link in the forum but that says about 2005b.
    Any help will be appreciated.
    regards
    Johnson

    Sir,
    Please do the following steps :
    1. Please go to the SBO-COMMON database, find table SARI, you will get
    the data entry for your Addon. Please check the value of field
    "AddOnChk". This is the digital signature of Addon executable file.
    2. Then go to installer package of the Addon, open the ard file
    (XLReporter.ard) with notepad then check the value of "addonsig".
    3. Compare these two values, if they are different, please overwrite
    "AddOnChk" field in database with the value of "addonsig" in ard file.
    and then try to start the addon again.
    4. If there are the same, the ard file or the executable file has been
    corrupted. I would like to suggest you remove the installer package
    from your machine, and download a fresh installer of Addon from SAP
    Service Marketplace. After that, please follow the steps as per the
    attached note ( Note no. 819501 ) to make your machine clean and
    then install the addon again.
    Regards,
    AVTAR SINGH

  • Hi all, Wrong Executable Digital Signature for Add-on

    hi all,
       i m getting error when installing my addon.
    "Wrong Executable Digital Signature for Add-on "
    i remove path from "AddOnsLocalRegistration". and also remove folder  from path
    "C:\Program Files (x86)\SAP\SAP Business One\AddOns" and also clean %temp% folder
    but i still getting same problem.
    Regards
    Rajkumar G

    Hi,
    Did u try recreating the add on, may be there was some problem when creating the ARD. If that also dosent work then try the following.. In the following path C:\Program Files\SAP\SAP Business One u will find the file AddOnsInstall.sbo now open this file with notepad and then remove the entries for ur add on. 
    Hope it helps,
    Vasu Natari.

  • Wrong Executable Digital Signature for Add-on

    Hi All
    I have created Addon Installer with the B1DE Installer Setup. After that also use batch file AddOnRegDataGen.bat to Generate Ard File.
    After I addon install successfully, BUT when I want to Start it , It Prompts message
    "Wrong Executable Digital Signature for Add-on."
    i am using SAP b1 2007 and BIDE 1.5.
    I have already read all the answers of the SDN and but i my problem didnt solve
    I am losing the hopes. Please Help!
    Thanks
    Rupinder

    Hi Rupinder ,
    Pls don't loose hope.
    This is the problem of exe, Actaullt while creating ADDon two files are created,
    one is ard and other is exe,
    take care about the version of Addon .,Generate all the keys again and see whether the old version of addon is ther or not if there pls remove that carefully .and create the addon again .
    Rgds,
    Anshu
    Edited by: anshu srivastava on Feb 17, 2009 12:12 PM

  • Hi Experts/Friends  wrong executable digital signature for Add-on

    i create add on when i start addon  from addon manager error
    msg raise "wrong executable digital signature for Add-on"
    Awaiting soon Reply
    raj

    Hi Raj,
    in Which method you created ARD..through B1DE or AddonRegdatagen..
    1) it may show error due to wrong .exe file selection  while creating the .ard file.
    2)Delete your older versions completely and try again..it will happen due to mismatch of versions also..
    Delete the folder SM_OBS_DLL(close sap and do) in your  %temp%  directory
    and try again..
    3)check you are using right version of B1DE ....
    Regards,
    Ganesh K

  • Add-on blank agrement wrong executable digital signature for add-on

    hai,
    when we trying to install the sample add-on called balnked agrement in sdk
    help file we are getting the follwing error.
    add-on blank agrement wrong executable digital signature for add-on.
    how do recftify this error.
    thanking
    nagababu

    Nagababu,
    I have seen this error when either the .ard file is corrupt or the license file is corrupt.  You may want to try getting a new license key from SAP and/or create a new .ard file.
    Eddy

  • The digital signature for this package is incorrect- error itunes install

    I won an ipod shuffle at MacWorld Wednesday. I need to update my itunes to 7.02, but keep getting this error after install is attempted:
    The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by “Apple”.
    G5   Mac OS X (10.4.8)  

    Ok..... got no help, but through lots of trial and error found the following. If I download the file my work on a flash dirve it installs fine. Best I can see is it must be some issue with my Netgear router.
    Try downloading on another system. File comes in as .dmg and then opens to a .mpkg when all is fine. Mine would never open the enclosing folder.
    Best of Luck!
    G5   Mac OS X (10.4.8)  

  • Wrong Digital Signature while installing ADDons

    Wrong Digital Signature while installing ADDons

    Hi,
    Please add the command line arguments in the command line parameters and access this parameters while connecting to the SBO application. and then build the setup for add on.
            '// Use an SboGuiApi object to establish connection
            '// with the SAP Business One application and return an
            '// initialized application object
            Dim SboGuiApi As SAPbouiCOM.SboGuiApi
            Dim sConnectionString As String
            bModal = False
            SboGuiApi = New SAPbouiCOM.SboGuiApi
            '// by following the steps specified above, the following
            '// statement should be sufficient for either development or run mode
            sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
            '// connect to a running SBO Application
            SboGuiApi.Connect(sConnectionString)
            '// get an initialized application object
            oSBOApplication = SboGuiApi.GetApplication()
    Regards,
    Noor

  • Wrong Digital Signature

    Hi,
           I have SAP B1 2004 &  I developed the addon using VS 2005.While tries to attach the addon in Addon administration it gives me wrong digital signature. The addon was successfully installed in SAP B12005 But it gives me error in SAP B12004.Plz Assist me its urgent. I have tried to created Setup & ard file using both B1DE2003 & B1DE2005. But the error was same......
    -Manmath

    Hi Manmath,
    Every time you recompile your addon code or the installer exe you need to reopen the AddOnRegDataGen application and regenerate the file again (you can open your old one and only press regenerate after).
    You can use B1DE installation wizards, they can create for you the complete installer project + a .bat you only have to rerun to regenerate the new ard file everytime you need it.
    Hope it helps
    Trinidad.

  • How to get digital signature for Google Map geocoding V3 in PL/SQL?

    Hi, Gurus:
        Could anyone provide me an example about how to generate digital signature for Google Maps service v3 in PL/SQL? We tried to upgrade our program using Google maps service from v2 to v3. We are using PL/SQl on background to send request to Google for geocoding. We found some sample code to register with digital signature, but none of them is based on PL/SQl. Notice I used Google business client ID "gme-XXX" and wallet.
    https://developers.google.com/maps/documentation/business/webservices/auth#digital_signatures
    Google Maps API - more URL signing samples
    Here is my code for V2. I notice in order to get signature, I need to use HMAC-SHA1 algorithm.
    procedure Get_Geocoding(P_s_Address in varchar2, P_s_Geocoding out varchar2, P_n_accuracy out number, P_b_success out boolean) is
      l_address varchar2(4000);
      l_url varchar2(32000);
      l_response varchar2(3200);
      n_first_comma number;
      n_second_comma number;
      n_level_length number;
    BEGIN
      /* TODO implementation required */
      l_address:=APEX_UTIL.URL_ENCODE(P_s_Address);
      l_address := replace(l_address,' ','+');
      l_url := 'http://maps.google.com/maps/geo?q='||l_address||'&'||'output=csv'||'&'||'client=gme-XXX';
    l_response := utl_http.request(l_url, APEX_APPLICATION.G_PROXY_SERVER, '/u02/app/oracle/admin/apexsb/wallet', 'XXXXXXXX');
      n_level_length:=0;
      n_first_comma:=instr(l_response,',',1,1);
      n_second_comma:=instr(l_response,',',1,2);
      n_level_length:=n_second_comma-n_first_comma-1;
      P_n_accuracy:=0;
      if n_level_length>0 then
      P_n_accuracy:=to_number(substr(l_response,n_first_comma+1, n_level_length));
      end if;
      l_response:=substr(l_response,instr(l_response,',',1,2)+1);
      --dbms_output.put_line('In function: l_response ='||l_response);
      P_s_Geocoding:=l_response;
      if (P_s_Geocoding<>'0,0') then
      P_b_success:=true;
      --dbms_output.put_line('true');
      else
      P_b_success:=false;
      --dbms_output.put_line('false');
      end if;
    END;
    Thanks!

    Hi, guys:
        I tried to generate digital signature for Google map service
         Maps for Business: Generating Valid Signatures - YouTube
        Generating an HMAC-SHA-1 Signature Using Only PL/SQL
          OAuth and the PL/SQL | Data Warehouse in the Cloud
       but I got error message from Google:
    Unable to authenticate the request. Provided 'signature' is not valid for the provided client ID. Learn more: https://developers.google.com/maps/documentation/business/webservices/auth
       I think there is something wrong with my code to generate signature, as if I remove the part regarding client and signature, it will work, can anyone help me on this problem?
    /*Procedure Get_Geocoding is used to get geocoding with accuracy level for V3 business account, you can find Google map digital signature descrirption from
    https://developers.google.com/maps/documentation/business/webservices/auth#digital_signatures
    if geocoding is 0,0, procedure returns false to indicate failure of get geocoding*/
    procedure Get_Geocoding2(P_s_Address in varchar2, P_s_Geocoding out varchar2, P_n_accuracy out number, P_b_success out boolean) is
      --private key for Google business account, this is provided by Google with client name.
      l_private_key_src varchar2(200):='xxxxxxxxxxxxxxxxxxx';
      l_private_key_b64_alter varchar2(200):= translate(l_private_key_src,'-_','+/');
      l_private_key_bin raw(2000);
      l_client_name varchar2(100):='gme-xxx';
      l_signature_mac raw(2000);
      l_signature_b64 varchar2(200);
      l_signature_b64_alter_back varchar2(200);
      l_Google_service_domain varchar2(200):='http://maps.googleapis.com';
      l_address varchar2(4000);
      l_url varchar2(32000);
      l_path varchar2(32000);
      l_response varchar2(32000);
      l_page UTL_HTTP.HTML_PIECES;
      n_actual_length number;
      json_obj json;
      json_tempobj json;
      jl_listOfValues json_list;
      json_geom_obj json;
      json_loc json;
      l_lat  VARCHAR2(40);
      l_lng  VARCHAR2(40);
      l_status VARCHAR2(255);
      json_accuracy json;
      --temp_string varchar2(10000);
      n_first_comma number;
      n_second_comma number;
      n_level_length number;
      BEGIN
    /* TODO implementation required */
    l_private_key_bin := utl_encode.base64_decode(UTL_I18N.string_to_raw(l_private_key_b64_alter, 'AL32UTF8'));
    l_address:=APEX_UTIL.URL_ENCODE(P_s_Address);
    --dbms_output.put_line(l_address);
    l_address := replace(l_address,' ','+');
    l_path := '/maps/api/geocode/json?address='||l_address||'&'||'sensor=true';
    dbms_output.put_line(l_path);
    l_signature_mac :=DBMS_CRYPTO.mac(UTL_I18N.string_to_raw(l_path, 'AL32UTF8'), DBMS_CRYPTO.hmac_sh1,l_private_key_bin);
    l_signature_b64:= UTL_RAW.cast_to_varchar2(UTL_ENCODE.base64_encode(l_signature_mac));
    l_signature_b64_alter_back:=translate(l_signature_b64,'+/','-_');
    dbms_output.put_line(l_signature_b64_alter_back);
    --get response from Google map service
    l_url:=l_Google_service_domain||l_path||'&client='||l_client_name||'&signature='||l_signature_b64_alter_back;
    --l_url:=l_Google_service_domain||l_path;
    dbms_output.put_line(l_url);
    l_page:=utl_http.request_pieces( l_url, 99999);
    for i in 1..l_page.count loop
    l_response:=l_response||l_page(i);
    end loop;
    n_actual_length:=length(l_response);
    dbms_output.put_line(n_actual_length);
    dbms_output.put_line(l_response);
    --parse JSON result
    json_obj:=new json(l_response);
    l_status := json_ext.get_string(json_obj, 'status');
    IF l_status = 'OK' then
    jl_listOfValues := json_list(json_obj.get('results'));
    json_tempobj := json(jl_listOfValues.get(1));
    json_geom_obj := json(json_tempobj.get(3));
    json_loc := json_ext.get_json(json_geom_obj, 'location');
    l_lat := to_char(json_ext.get_number(json_loc, 'lat'));
    l_lng := to_char(json_ext.get_number(json_loc, 'lng'));
    P_s_Geocoding:=l_lat||','||l_lng;
    dbms_output.put_line('##########'||P_s_Geocoding);
    case json_ext.get_string(json_geom_obj, 'location_type')
    when 'ROOFTOP' then P_n_accuracy:=9;
    when 'RANGE_INTERPOLATED' then P_n_accuracy:=7;
    when 'GEOMETRIC_CENTER' then P_n_accuracy:=5;
    else P_n_accuracy:=3;
    end case;
    P_b_success:=true;
    else
    P_b_success:=false;
    P_n_accuracy:=0;
    P_s_Geocoding:='0,0';
    end if;
      END;

  • Digital signature for form-16

    Hi Experts,
    We have to implement digital signature for form-16 on only SAP system (not on portal). Can anyone write me steps to configure and impelement it in ECC6.0
    I have read SAP Note 1168740 and tried to open the link
    Steps to install these credetials is explained at following URL:
                             http://help.sap.com/saphelp_nw70/helpdata/en/db/ aafb211ead420faeeaa24e99eb5f41/frameset.htm
    Further information on digital signature can be found at:
                             http://help.sap.com/saphelp_nw70/helpdata/EN/46/ 1ca382f3ec5873e10000000a11466f/frameset.htm
    and also tried to get information on "Adobe Document Services Configuration Guide".
    However, i am unable to get the details. Pls help me to resolve this.
    Thanks & Regards,
    Shree NP.
    Edited by: SAP.HR.NP on Jan 4, 2012 11:20 AM

    Hi Shree,
    As mentioned in your post, the configuration given in the document is Basis related. However, the entire configuration for Digital Signature for Form 16 is available in Note 1168740. Are you facing some problem in opening the links mentioned in the Note?
    You can try to visit the below links:
    a) Uploading a digital signature in the system:
       You obtain your credentials and the corresponding public keys (as part of a certificate) for certifying and signing from a
       certification authority. Steps to install these credetials is explained at following URL:
    http://help.sap.com/saphelp_nw70/helpdata/en/db/aafb211ead420faeeaa24e99eb5f41/frameset.htm
    Further information on digital signature can be found at:
    http://help.sap.com/saphelp_nw70/helpdata/EN/46/1ca382f3ec5873e10000000a11466f/frameset.htm
    Also, go through the Note 1589254 (Form 16 central note for ADS configuration). In order to include digital signature to Form 16's PDF, some additional ADS configuration is required. This note provide check point of ADS configuration for Form16. Once done check the form 16 and let me know if you are getting some error on executing Form 16 with digital signature? Or are the signature not working at all?
    Regards,
    Nishtha

Maybe you are looking for