Error wwhile intalling Oracle 10g Designer 9.0.4.5

While installing this Oracle product i have two errors
The first one http://www2.shrani.si/files/napakaor449149.jpg
and after clickinh on "Stop installation for this component only" I get
this error:
http://www2.shrani.si/files/napakaor449150.jpg
Can please anyone help me.
Thx

Try to deinstall Oracle Developer Suite products clear all registry entries reference to Oracle Developer Suite , then restart your system and try again...

Similar Messages

Error while installing Oracle 10g on Fedora Core 1

Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
We have tried by using the on-line procedure and changing the required script to make believe it as said.

Are you createing DB also???

Error while installing Oracle 10g on Solaris 9 x86

Hi all,
I got several error after install oracle 10g. After I run the root.sh. It prompt :
Starting Oracle CSS service under init(1M)
Expecting the CRS daemons to be up within 120 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
and when I start sqlplus, it prompt:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Intel SVR4 UNIX Error: 2: No such file or directory
and following the error message prompt every minutes.
"oracle: (Oracle CSSD will be run out of init)"
"root: Failure in CSS initialization opening OCR."
I don't think reinstall oracle will solve my problem if I don't figure out what going wrong. Could anyone tell me what I need to do? Thanks very much for helping.
Cheers,
Alex

Check also if the t-bit is set:
[root@vtl1g121 ~]# ls -dl /tmp
drwxrwxrwt 11 root root 4096 Apr 10 11:44 /tmp
This is needed to mark the filesystem/directory as temporary.
Sometimes this can cause such problems also
Command: chmod +t /tmp

Error while installing oracle 10g on AIX

I am receiving the following error while installing oracle 10g on AIX..
error in invoking target 'relink' of makefile 'u01/app/oracle/product/10.2.0/orcl/precomp/lib/ins_precomp.mk'..
i am installing enterprise edition. pl help

Hi;
What is AIX version?
Please see:
Installing 10g On Aix 5.3:'Error In Invoking Target 'Relink' Of Makefile ...' [ID 309668.1]
AIX: On Silent Install, Getting Several 'Error In Invoking Target' Messages [ID 351380.1]
"Error invoking target ... of makefile ... " Errors While Installing 8.1.6 [ID 113781.1]
Please also check below and be sure you have all prereq. on your server:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

Error encounded during oracle 10g installation on mac os 10x

Hi All,
I am installing oracle 10g on my mac laptop os 10 x, I am getting the below error during execution of dbca script for db creation, I am not able to proceed further, please advice
[Thread-3] [17:11:23:18] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
[Thread-3] [17:11:23:18] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
[Thread-3] [17:11:23:19] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-3] [17:11:23:20] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
[Thread-3] [17:11:23:20] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-3] [17:11:23:25] [InitParamAttributes.sortParams:3532] m_sortOn:-1 sortOn:4
[Thread-3] [17:11:23:53] [Host.noEntryinOratab:5115] Check made for oratab arg passed............
[Thread-3] [17:11:23:53] [Oratab.getTempFile:710] Temp oratab: /tmp/oratab
[Thread-3] [17:11:23:94] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@29da77
[Thread-3] [17:11:23:95] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
[Thread-3] [17:11:23:96] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=/app/oracle/flash_recovery_area
[Thread-3] [17:11:23:96] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
[Thread-1] [17:11:24:476] [BasicStep.handleNonIgnorableError:430] oracle.sysman.assistants.util.UIMessageHandler@29da77:messageHandler
[Thread-1] [17:11:24:476] [BasicStep.handleNonIgnorableError:431] ORA-12547: TNS:lost contact
:msg
[Thread-3] [17:11:27:466] [SQLEngine.done:1966] Done called
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12547: TNS:lost contact
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1482)
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.connect(SQLEngine.java:829)
     at oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:244)
     at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
     at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
     at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)
     at java.lang.Thread.run(Thread.java:552)
[Thread-3] [17:11:27:470] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@29da77
[Thread-3] [17:11:27:470] [StepContext$ModeRunner.run:2504] oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:435)
oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)
java.lang.Thread.run(Thread.java:552)
Thanks
Vijayaprakash

Duplicate post - Error encounded during oracle 10g installation on mac os 10x
Srini

Error while download oracle 10g release2 for linux x-86

Hi,
I got errors while downloading oracle 10g r2 for linux x-86 from
http://www.oracle.com/technology/software/products/database/index.html
i got htis error:
source file not found
contact administrator.
how do i download?

Works for me in western Canada right now.
You might want to try again, and if it still happens try clearing your browser cache and cookies.

Error to connect oracle 10g client and designer BO 4.0

hello,
I try to connect oracle 10g client and designer BO 4.0.
I created an ODBC connection to function in the administration tools of data sources but I can not connect once in designer.
I tried using the driver directly oracle designer 10 but I have the same error that is this:
DBD: ORA-12154: TNS: connection identifier specified could not be resolved
someone there had the same concerns?
cordially

Hi,
so it looks like that your TNSNAMES.ORA file isn`t properly configured. Thats why you can connect with the IDT to your Oracle Database.
Your DBA`s should sent you the correct TNSNAMES.ORA file or the entry for your DB prior. After the tnsping works, you will be able to use the IDT properly.
Regards
-Seb.

Error in Installing Oracle 10g Express Edition Universal on WIndows2003

While Installing Oracle 10g XE Universal On WIndows 2003 Server Standard Edition(Which is a standalone Machine). I got an following Error:
Error No: 0x80040707
Error Description: DLL Function Call Crashed: GetHostnameDll.getHostname.
Plz find some solution for the above problem.

Hi
Here's the resolution that can work for you:
Disable the "Print Spooler" service before running the installer.
1.Open Control Panel: Start --> Settings --> Control Panel
2.Double-click "Services"
3.On the list of NT Services, right-click "Print Spooler"
4.Select "Stop"
5.Select "Properties"
6.Under Startup Type, select "manual" or "disabled"
7.Reboot your NT Server
8.After rebooting, verify that the Print Spooler is still "stopped".
9.Delete Program Files\Common Files\Installshield\Engine folder
10.Re-run the installer.
11.After installation, re-set the Print Spooler service to Startup type "Automatic" and start the service.
Also, have a look at the installshield page: http://consumer.installshield.com/kb.asp?id=Q108167
-Priya

How do I view Migrate Data errors - Access 2003 - Oracle 10g

I'm trying to use the SQL Developer to migrate data from an Access 2003 database to an Oracle 10g database. I followed the instructions found here:
http://www.oracle.com/technology/tech/migration/workbench/files/omwb_getstarted.html
I was able to complete every step except the actual data move. I exported the xml for the Access database, I captured the export and then ran the generation scripts on my target Oracle database (I'm using the same schema for the migration repository and the actual data). It created the tables with only one or two errors which I resolved.
Now, when I select Migration->Migrate Data, I get the dialog that appears to start 4 or 5 threads and attempts to migrate each table. They all error and do not transfer any rows. I can see that there's one error per table, but I can't see the error text. I just know that an error occurred. Is there a log somewhere or is the error displayed somewhere else? How do I know what's gone wrong?
Thanks.

I too receive unexplained error counts using the Migrate Data menu selection and unexplained failures using the Generate Data Move Scripts menu selection. Permissions granted by role or direct grants should not be a problem, but a Migrate Data error appears in the Migration Log panel at the bottom of the SQL Developer window, "Failed to disable constraints: ORA-00942 ... ". No further details available on what constraints or why the error. No other errors were detected while following the instructions found in the Oracle SQL Developer Migration Workbench Getting Started guide. SQL Developer never migrates the data from the existing Access 2000 mdb file to the newly created schema objects in Oracle 10g using either method. The following roles and privileges have been granted to both the repository owner and the target schema owner:
GRANT RESOURCE TO MIGRATE_USER WITH ADMIN OPTION;
GRANT CONNECT TO MIGRATE_USER WITH ADMIN OPTION;
ALTER USER MIGRATE_USER DEFAULT ROLE ALL;
-- 25 System Privileges for MIGRATE_USER
GRANT CREATE ROLE TO MIGRATE_USER;
GRANT ALTER TABLESPACE TO MIGRATE_USER;
GRANT ALTER ANY SEQUENCE TO MIGRATE_USER;
GRANT INSERT ANY TABLE TO MIGRATE_USER;
GRANT SELECT ANY TABLE TO MIGRATE_USER;
GRANT CREATE ANY TABLE TO MIGRATE_USER;
GRANT UNLIMITED TABLESPACE TO MIGRATE_USER WITH ADMIN OPTION;
GRANT DROP TABLESPACE TO MIGRATE_USER;
GRANT CREATE ANY TRIGGER TO MIGRATE_USER;
GRANT ALTER ANY ROLE TO MIGRATE_USER;
GRANT CREATE VIEW TO MIGRATE_USER WITH ADMIN OPTION;
GRANT DROP USER TO MIGRATE_USER;
GRANT CREATE TABLESPACE TO MIGRATE_USER;
GRANT GRANT ANY ROLE TO MIGRATE_USER;
GRANT CREATE ANY SEQUENCE TO MIGRATE_USER;
GRANT ALTER ANY TABLE TO MIGRATE_USER;
GRANT DROP ANY TRIGGER TO MIGRATE_USER;
GRANT DROP ANY ROLE TO MIGRATE_USER;
GRANT DROP ANY SEQUENCE TO MIGRATE_USER;
GRANT UPDATE ANY TABLE TO MIGRATE_USER;
GRANT ALTER ANY TRIGGER TO MIGRATE_USER;
GRANT COMMENT ANY TABLE TO MIGRATE_USER;
GRANT DROP ANY TABLE TO MIGRATE_USER;
GRANT CREATE PUBLIC SYNONYM TO MIGRATE_USER WITH ADMIN OPTION;
GRANT CREATE USER TO MIGRATE_USER WITH ADMIN OPTION;
-- 1 Tablespace Quota for MIGRATE_USER
ALTER USER MIGRATE_USER QUOTA UNLIMITED ON USERS;
Operating system for both Access 2000 and Oracle 10g is Windows XP PRO SP2.
Oracle SQL Developer is version 1.1.2.25 build MAIN-25.79 on Windows XP PRO SP2. All three are on the same PC.
Since only the last step failed, I created a User DSN with the ODBC administrator. Then, linked the newly created Oracle table to Access via ODBC using the DSN created. Next, I created an append query with the source being the Access table and the target being the Oracle table. I moved the data by pressing the red exclamation mark.

"Error In Writing to directory ..." getting the error while installing oracle 10g in laptop

Hi
I thought I'd make my first post a hijack of a vaguely related thread,
then some kind moderator could separate it out and branch it off to a post of its own.
I'm not even sure this is in the proper forum.
But anyhow ...
i am getting problem while installing oracle 10g in laptop its showing error as "Error in Writing to Directory C:\Users\Accent.Muthu\Appdata\Local\temp\OraInstall2011-03-03-10-51-53 AM.
Please ensure that the directory is writable and has atleast of 45 MB of disk space.Installation can not continue.
so please tell me the solution as soon as possible
thanks,
arshad ayub

Try the few resolutions mentioned here -
forms 10g installation error in writing to directory
Specially -
do not try to install from directory which has a space in its path
TMP and TEMP environment variables are set correctly, preferably to C:/tempRegards,
Anuj

ORA-01722: Invalid number - error only in Oracle 10g?

While trying to insert a numeric value into a decimal column, I get this error. Hitherto, my update statements used to look fine.
Can anyone let me know if this enforcement is specific to Oracla 10g? I am running :
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Thanks in advance for your help!
Niranjan

Well, you've a blank space which isn't a number, that's why you have an error.
Please see the following example to have a default value :
SQL> create table tutu (id number, text varchar2(10));
Table created.
SQL> alter table tutu modify id default 0;
Table altered.
SQL> insert into tutu values (' ', 'NoWork');
insert into tutu values (' ', 'NoWork')
ERROR at line 1:
ORA-01722: invalid number
SQL> insert into tutu values (null,'NullValue');
1 row created.
SQL> insert into tutu (text) values ('Default');
1 row created.
SQL> insert into tutu values (1,'NonDefault');
1 row created.
SQL> select * from tutu;
        ID TEXT
           NullValue
         0 Default
         1 NonDefault
SQL> Nicolas.
Message was edited by:
N. Gasparotto

ORA-01722: invalid number error coming in Oracle 10g.

Hi,
We are getting the error "ORA-01722: invalid number" while opening a cursor using CURSOR FOR LOOP.
This error has started coming only after we have migrated to Oracle 10g from Oracle 9i. Earlier the same code used to work properly. And also on Oracle 10g, its not happening every time. Sometimes it gives error while sometimes it works.
Does anybody know about any such bug in Oracle 10g. Our cursor is a parametrized cursor accepting a VARCHAR2 parameter and the value we are passing to it is also character.
Our database is Oracle 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production and is running on UNIX server.

And also on Oracle 10g, its not happening every time. Sometimes it gives error while sometimes it works. This is typically due to
a) environment settings that differ from session to session
b) or more often, data
The actual error means that Oracle expects a number and is unable to obtain a number from the input (data or SQL or bind variables) supplied. I agree with William that it looks a lot like an implicit TO_NUMBER() conversion failing.
Why not add a debug exception handler to the code? When that exception occurs, dump the PL/SQL call stack and values of all variables and parameters to a debug/logging table (using an autonomous transaction).

Getting Error while installing oracle 10g 1.0.2.0 on Redhat - linux 64bit

I am installing oracle 10g on Redhat 64bit (VM ware). In the middle it gives some error oracle Net services cancelled. Please see the error message below and advise.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser.dir=/u01/app/oracle/product/10.2.0/db_1/network/jlib -classpath /u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:/u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/10.2.0/db_1/network/jlib/netcam.jar:/
u01/app/oracle/product/10.2.0/db_1/network/jlib/netca.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/help4.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oracle_ice.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/swingall-1_1_1.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvm.jar:/
u01/app/oracle/product/10.2.0/db_1/network/tools:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt9.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt10.jar:/
u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/10.2.0/db_1/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /u01/app/oracle/product/10.2.0/db_1 /orahnam OraDb10g_home1 /instype typical /inscomp client,
oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /
u01/app/oracle/product/10.2.0/db_1/network/install/netca_typ.rsp
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.

865231 wrote:
I am installing oracle 10g on Redhat 64bit (VM ware). In the middle it gives some error oracle Net services cancelled. Please see the error message below and advise.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser.dir=/u01/app/oracle/product/10.2.0/db_1/network/jlib -classpath /u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:/u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/10.2.0/db_1/network/jlib/netcam.jar:/
u01/app/oracle/product/10.2.0/db_1/network/jlib/netca.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/help4.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oracle_ice.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/swingall-1_1_1.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvm.jar:/
u01/app/oracle/product/10.2.0/db_1/network/tools:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt9.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt10.jar:/
u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/10.2.0/db_1/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /u01/app/oracle/product/10.2.0/db_1 /orahnam OraDb10g_home1 /instype typical /inscomp client,
oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /
u01/app/oracle/product/10.2.0/db_1/network/install/netca_typ.rsp
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.I thought the error message gave the advice already:
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.Looks like you canceled the pop up to configure your tns files. No harm, your database created just fine, but probably didn't configure listener.ora, sqlnet.ora, and tnsnames.ora. Just run netca and finish the tns confiiguration.

Error while installing oracle 10g in redhat Server

Hi experts,
I installed Oracle 10g in RedHat Linux server. After the installation Oracle will work smoothly. After restarting the server we try to start the listener service manually but it is not starting. I configured listener.ora file using GUI interface and also set Oracle HOME and Oracle SID. But still it’s not starting.
when Try to start the listener the following error comes.
Tns-12537:TNS:Connection closed
Tns-12560:TNS:PROTOCOL ADAPTER ERROR
Tns-00507:TNS:Connection closed
Linux error 29:illegal Seek.
Please help me

Thanks for the answer it was helpful and i successfully started the oracle database.
and i am trying to import dump file to tha database by creating the new schema when i try this i used the command like
imp userid=username/password@servicename file=C:\filename.dmp fromuser=username touser=username but i got error as no such command.pls help

Error While Installing ORACLE 10g in Redhat Linux 5.0

Hi all,
Anybody please guide me regarding the posted error.
I'm trying to install ORACLE 10g in Redhat Linux 5.0 and finding error as "Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-10-15_09-20-56PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
I tired a lot to sort it out but unable to resolve.So please tell me the possible ways.
I appreciate all types of clarifications...
Thanks in Advance
Sajeev George

Sajeevcmc wrote:
Hi,
Thanks for the reply.
Could you please tell me the rpm full name and where i can download the same?
Thanks in Advance
SAJEEV GEORGEYou need to have the following packages installed already before starting Oracle installation
http://download.oracle.com/docs/cd/B19306_01/install.102/b15669/pre_install.htm#sthref80
binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
And from the following link, you can get the same list:
http://www.puschitz.com/InstallingOracle10g.shtml (Go to Checking Software Packages (RPMs))
And from my installation guide you can easily install Oracle on Linux by following step by step instruction
[Step by Step Installing Oracle Database 10g Release 2 on Linux (CentOS) and AUTOMATE the installation using Linux Shell Script|http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Error wwhile intalling Oracle 10g Designer 9.0.4.5

Similar Messages

Maybe you are looking for