Error:wwnn address assignment failed for a vhba

Hello,
We are trying to create a service profile but get this message for the vhba:
wwnn address assignment failed for a vhba
Currently the Storage is not connect yet to the 6200.
Can someone please help ?
Regards,

Full error is:
wwnn address assignment failed for a VHBA, possibilty illegal WWNN address or no available WWN in the pool
Yes this is happning when I try to assign from the WWNN pool.

Similar Messages

  • Resource control assignment failed for project

    I've setup a new project (we run sap), and keep getting the following msg
    pam_unix_cred: project.max-sem-ids resource control assignment failed for
    project "PAB"
    I know you can get this sort of msg if you have wrong syntax in your project, but it all looks well to me. Any ideas gratefully received. cheers Lou
    /etc/project >
    PAB:1000:SAP System PAB:orapab,pabadm::
    process.max-sem-nsems=(priv,2048,deny);project.max-sem-ids=(priv,1024,deny);project.max-shm-i
    ds=(priv,256,deny);project.max-shm-memory=(priv,18446744073709551615,deny)

    Hi
    The original entries were created with projadd.
    I've just done a projdel and another projadd (as below) and watching out for error msgs - will post again when I get the error msgs - cheers Lou
    root@sappab # projadd -p 1000 -c "SAP System PAB" -U pabadm,orapab \
    root@sappab > -K "project.max-sem-ids=(priv,1024,deny)" \
    root@sappab > -K "process.max-sem-nsems=(priv,2048,deny)" \
    root@sappab > -K "project.max-shm-ids=(priv,256,deny)" \
    root@sappab > -K "project.max-shm-memory=(priv,18446744073709551615,deny)" \
    root@sappab > PAB
    root@sappab # more /etc/project
    system:0::::
    user.root:1::::
    noproject:2::::
    default:3::::
    group.staff:10::::
    PAB:1000:SAP System PAB:orapab,pabadm::process.max-sem-nsems=(priv,2048,deny);project.max-sem-ids=(priv,1024,deny);project.max-shm-i
    ds=(priv,256,deny);project.max-shm-memory=(priv,18446744073709551615,deny)

  • Mac book pro (2008)will not start up,command-v gives (error) Import:Importer start failed for 89(kr:268435459)invalid destination port)

    will not start up.
    tried Command-v
    message reads
    (error) Import:Importer start failed for 89 (kr:268435459)invalid destination port)

    First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Issthe PO Error message *Account assignment mandatory for material

    At the time of creating the PO after putting the material and plant I get the error message " *Account assignment mandatory for material 10000213". The plant for which i want to raise is 3004 which i have created recently and only in this plant this message is showing. Please help me out
    Edited by: amitekum on Sep 17, 2010 12:34 PM

    you should have searched sdn first for this
    anyways it means that the in tcode OMS2.
    you need to mark the check box quantity and value updation for the material type of your material in combinationwith your plant
    it means this material is acting as consumable material

  • ERROR: tax/calc: Build failed for . . .in variant "default": Used component

    Hi Friends,
    Could anyone help me in find the way to get rid of the above error.
    I have installed and configured the JDI, and created a sample DC with java as mentioned in the help in the NWDS.
    I created the DC, i have created Java package, but when tried to build the DC, i am getting the following :
    "<i><b>
    Nov 14, 2005 3:36:26 PM /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: tax/calc: Build failed for deloitte.dc.com/tax/calc(mydeloitte.org_MYDELOITTECOMPONENT_1) in variant "default": Used component not found: sap.com/tc/bi/bp/javaLib</b></i> "
    Please help me in this regard. Thanks for your time.
    Thanks,
    RP

    Seems like the SAP_BUILDT SCA is missing from your track. Did you check-in and import all three SCA's (SAP_BUILDT, SAP_JTECHS and SAP-JEE)?
    See http://help.sap.com/saphelp_nw04/helpdata/en/ab/6760b8d7b64b6eb74052eb5bdf1405/frameset.htm for more info.
    Message was edited by: Pascal Willemsen

  • BAPI Error: No account assignment exists for service line 0000000000

    I am using BAPI : BAPI_PO_CREATE1 to create a PO.
    I am getting this error while creating PO  "No account assignment exists for service line 0000000000"
    Please help.

    Yes...
    for each item i am creating one parent service record and one child service record with REQUISITION_SERVICES.
    the Package no for parent is the subpackage no for child.
    also for each item, I fill REQUISITION_ACCOUNT_ASSIGNMENT and REQUISITION_SRV_ACCASS_VALUES
    Still I get the Error.
    Thanks to help me resolve.

  • Error ORABPEL-10902 compilation failed, for an almost empty bpel  file

    Thank you for reading my post
    I have a problem with a bpel process in Oracle SOA suite 10.1.3.1 and its compliance jdeveloper (10.1.3.1).
    when i try to compile the appliaction and deploy it to server it returns and error which i include in this message.
    Here is the bpel file
    <process name="Puchase_Request" abstractProcess="no"
             enableInstanceCompensation="no" suppressJoinFailure="no"
             targetNamespace="www.testi.com"
           xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
             xmlns:xsd="http://www.w3.org/2001/XMLSchema"
             xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
             xmlns:ns1="http://testi2.com/"
             xmlns:ns2="www.testi.com"
             xmlns:ns3="www.testi.com" >
                  </process>and here is the error message it returns
    Problem is that i get an error like :
    Error:
    [Error ORABPEL-10902]: compilation failed
    [Description]: in "F:\appplication\bpel\Puchase_Request.bpel", XML parsing failed because "".
    [Potential fix]: n/a.
    Does any one faced such problem?

    Hi
    I too got similar problem
    [Error ORABPEL-10902]: compilation failed
    [Description]: in "bpel.xml", XML parsing failed because "undefined part element.
    In WSDL at "file:/C:/JDeveloper/jdev/mywork/CICWorkSpace/CICBPEL/bpel/CICBPEL.wsdl", message part element "{http://xmlns.oracle.com/orchestration}confirmationMessage" is not defined in any of the schemas.
    Please make sure the spelling of the element QName is correct and the WSDL import is complete.." [Potential fix]: n/a.
    WSDL
    =====
    <definitions
    name="CICBPEL"
    targetNamespace="http://xmlns.oracle.com/CICBPEL"
    xmlns="http://schemas.xmlsoap.org/wsdl/"
    xmlns:ns4="http://www.1sync.org"
    xmlns:ns1="http://www.globalcompany.com/ns/sales"
    xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:ns3="http://xmlns.oracle.com/pcbpel/adapter/db/top/CICSPECIFIC"
    xmlns:ns2="http://xmlns.oracle.com/orchestration"
    xmlns:ns5="http://xmlns.oracle.com/pcbpel/adapter/db/top/selectmsg"
    xmlns:client="http://xmlns.oracle.com/CICBPEL"
    >
    <types>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns4="http://www.1sync.org" xmlns:ns1="http://www.globalcompany.com/ns/sales"
    xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/" xmlns:ns3="http://xmlns.oracle.com/pcbpel/adapter/db/top/CICSPECIFIC"
    xmlns:ns5="http://xmlns.oracle.com/pcbpel/adapter/db/top/selectmsg" xmlns:ns2="http://xmlns.oracle.com/orchestration"
    xmlns:client="http://xmlns.oracle.com/CICBPEL">
    <xsd:import namespace="http://www.1sync.org" schemaLocation="CatalogueItemConfirmationProxy.xsd"/>
    <xsd:import namespace="http://xmlns.oracle.com/CICBPEL" schemaLocation="CICBPEL.xsd"/>
    <xsd:import namespace="http://xmlns.oracle.com/orchestration" schemaLocation="CanonicalConfirmationMessageSchema.xsd"/>
    </xsd:schema>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns4="http://www.1sync.org"
    xmlns:ns1="http://www.globalcompany.com/ns/sales" xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
    xmlns:ns3="http://xmlns.oracle.com/pcbpel/adapter/db/top/CICSPECIFIC" xmlns:ns2="http://xmlns.oracle.com/orchestration"
    xmlns:ns5="http://xmlns.oracle.com/pcbpel/adapter/db/top/selectmsg" xmlns:client="http://xmlns.oracle.com/CICBPEL">
    <xsd:import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/selectmsg" schemaLocation="selectmsg_table.xsd"/>
    </xsd:schema>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns4="http://www.1sync.org"
    xmlns:ns1="http://www.globalcompany.com/ns/sales" xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
    xmlns:ns3="http://xmlns.oracle.com/pcbpel/adapter/db/top/CICSPECIFIC" xmlns:ns5="http://xmlns.oracle.com/pcbpel/adapter/db/top/selectmsg"
    xmlns:ns2="http://xmlns.oracle.com/orchestration" xmlns:client="http://xmlns.oracle.com/CICBPEL">
    <xsd:import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/selectmsg" schemaLocation="message.xsd"/>
    <xsd:import namespace="http://xmlns.oracle.com/orchestration" schemaLocation="CanonicalConfirmationMessageSchema.xsd"/>
    </xsd:schema>
    </types>
    <message name="CICBPELRequestMessage">
    <part name="payload" element="ns5:M4uDmdMessagesCollection"/>
    </message>
    <message name="CICBPELResponseMessage">
    <part name="payload" element="ns4:envelope"/>
    </message>
    <message name="canonical_CICMessage">
    <part name="payload" element="ns2:confirmationMessage"/>
    </message>
    <portType name="CICBPEL">
    <operation name="initiate">
    <input message="client:CICBPELRequestMessage"/>
    </operation>
    </portType>
    <portType name="CICBPELCallback">
    <operation name="onResult">
    <input message="client:CICBPELResponseMessage"/>
    </operation>
    </portType>
    <plnk:partnerLinkType name="CICBPEL">
    <plnk:role name="CICBPELProvider">
    <plnk:portType name="client:CICBPEL"/>
    </plnk:role>
    <plnk:role name="CICBPELRequester">
    <plnk:portType name="client:CICBPELCallback"/>
    </plnk:role>
    </plnk:partnerLinkType>
    </definitions>
    I dont understand the problem

  • Error Msg: SQL login failed for HOSTNAME? Upgrade task?

    Hi everybody,
    Since some weeks we see an error message in all servers our SharePoint 2010 SP1 Farm, regulary every hour:
    SQL database login for 'SharePoint_Config' on instance 'sqlsrv' failed.
    Additional error information from SQL Server is included below.
    Login failed for user 'OURDOMAIN\SERVERNAME$'.
    The interesting part is that the
    server tries to connect to the SharePoint Config database, not a dedicated account, which is normally used for every SharePoint service.
    What circumstances can lead to an access of a server?
    Unfortunately I get no details of the service or application which is trying to access. The event log just states "SharePoint Foundation (Microsoft-SharePoint Products-SharePoint
    Foundation)" , Task Category "Database". The user who raises the error is "SYSTEM".
    In the ULS log I can find the Stack Trace below which indicates to an upgrade task. But why is the SYSTEM user trying an update? Normally we do an upgrade by running the Upgrade Wizard with an dedicated account. And only the SharePoint Administration
    windows service runs as Local System.
    And I never heard or read something like: Give Local System (so the server) access to the SharePoint Config database?!
    Thanks for your ideas :-)
    Benjamin
    System.Data.SqlClient.SqlException: Login failed for user 'DOMAIN\SERVERNAME$'.   
    at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)   
    at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)   
    at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)   
    at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)   
    at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
    at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)   
    at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)   
    at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)   
    at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)   
    at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)   
    at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)   
    at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)   
    at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)   
    at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)   
    at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)   
    at System.Data.SqlClient.SqlConnection.Open()   
    at Microsoft.SharePoint.Utilities.SqlSession.OpenConnection()
    at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean retryForDeadLock)   
    at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, Boolean retryForDeadLock)   
    at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command)   
    at Microsoft.SharePoint.Upgrade.SPDatabaseSequence.GetVersion(SPDatabase database, Guid id, Version defaultVersion, SqlSession session, SPDatabaseSequence sequence)   
    at Microsoft.SharePoint.Upgrade.SPDatabaseWssSequence.get_BuildVersion()   
    at Microsoft.SharePoint.Upgrade.SPSequence.get_CanUpgrade()   
    at Microsoft.SharePoint.Upgrade.SPUpgradeSession.CanUpgrade(Object o)   
    at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.get_CanUpgrade()   
    at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveCanUpgrade(Object o)   
    at Microsoft.SharePoint.Upgrade.SPUpgradeSession.NeedsUpgrade(Object o, Boolean bRecurse)   
    at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.get_NeedsUpgrade()   
    at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.ValidateBackwardsCompatibility()   
    at Microsoft.SharePoint.Administration.SPConfigurationDatabase.Initialize(SqlConnectionStringBuilder connectionString, Boolean enableCaching, Boolean checkCompatibility, Boolean bindRequestGuid)   
    at Microsoft.SharePoint.Administration.SPConfigurationDatabase.Initialize(SqlConnectionStringBuilder connectionString, Boolean enableCaching, Boolean checkCompatibility)   
    at Microsoft.SharePoint.Administration.SPConfigurationDatabase.get_Local()   
    at Microsoft.SharePoint.Administration.SPFarm.FindLocal(SPFarm& farm, Boolean& isJoined)   
    at Microsoft.SharePoint.Administration.SPWebService.get_ContentService()   
    at Microsoft.SharePoint.PowerShell.SPCmdletSnapIn.get_Cmdlets()   
    at System.Management.Automation.Runspaces.RunspaceConfigForSingleShell.MergeCustomPSSnapIn(PSSnapInInfo mshsnapinInfo, CustomPSSnapIn customPSSnapIn)   
    at System.Management.Automation.Runspaces.RunspaceConfigForSingleShell.LoadCustomPSSnapIn(PSSnapInInfo mshsnapinInfo)   
    at System.Management.Automation.Runspaces.RunspaceConfigForSingleShell.LoadPSSnapIn(PSSnapInInfo mshsnapinInfo)   
    at System.Management.Automation.Runspaces.RunspaceConfigForSingleShell.LoadPSSnapIn(PSSnapInInfo mshsnapinInfo, PSSnapInException& warning)   
    at System.Management.Automation.Runspaces.RunspaceConfigForSingleShell.DoAddPSSnapIn(String name, PSSnapInException& warning)   
    at Microsoft.PowerShell.Commands.AddPSSnapinCommand.AddPSSnapIns(Collection`1 snapInList)   
    at Microsoft.PowerShell.Commands.AddPSSnapinCommand.ProcessRecord()   
    at System.Management.Automation.CommandProcessor.ProcessRecord()   
    at System.Management.Automation.CommandProcessorBase.DoExecute()   
    at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate)   
    at System.Management.Automation.PipelineNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)   
    at System.Management.Automation.StatementListNode.ExecuteStatement(ParseTreeNode statement, Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)   
    at System.Management.Automation.StatementListNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)   
    at System.Management.Automation.ifStatementNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)   
    at System.Management.Automation.StatementListNode.ExecuteStatement(ParseTreeNode statement, Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)   
    at System.Management.Automation.StatementListNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)   
    at System.Management.Automation.ParseTreeNode.Execute(Array input, Pipe outputPipe, ExecutionContext context)   
    at System.Management.Automation.ScriptCommandProcessor.ExecuteWithCatch(ParseTreeNode ptn, Array inputToProcess)   
    at System.Management.Automation.ScriptCommandProcessor.RunClause(ParseTreeNode clause, Object dollarUnderbar, Object inputToProcess)   
    at System.Management.Automation.CommandProcessorBase.DoComplete()   
    at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate)   
    at System.Management.Automation.PipelineNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)   
    at System.Management.Automation.StatementListNode.ExecuteStatement(ParseTreeNode statement, Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)   
    at System.Management.Automation.StatementListNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)   
    at System.Management.Automation.ParseTreeNode.Execute(Array input, Pipe outputPipe, ExecutionContext context)   
    at System.Management.Automation.ScriptCommandProcessor.ExecuteWithCatch(ParseTreeNode ptn, Array inputToProcess)   
    at System.Management.Automation.ScriptCommandProcessor.RunClause(ParseTreeNode clause, Object dollarUnderbar, Object inputToProcess)   
    at System.Management.Automation.CommandProcessorBase.DoComplete()   
    at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate)   
    at System.Management.Automation.Runspaces.LocalPipeline.InvokeHelper()   
    at System.Management.Automation.Runspaces.LocalPipeline.InvokeThreadProc()   
    at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)   
    at System.Threading.ThreadHelper.ThreadStart()

    http://aanuwizard.com/2010/04/30/login-failed-for-user-domainservername/
    It  will  need to add user ‘NT AUTHORITY\NETWORK SERVICE’
    to your database  to get rid of this problem.
    An asp.net application  is running under NT AUTHORITY\NETWORK SERVICE account.
    http://stackoverflow.com/questions/2806438/login-failed-for-user-domain-machinename
    NETWORK SERVICE and LocalSystem will authenticate themselves always as the correpsonding account locally (builtin\network service and builtin\system) but both will authenticate as the machine account remotely.
    If you see a failure like Login failed for user 'DOMAIN\MACHINENAME$' it means that a process running as NETWORK SERVICE or as LocalSystem has accessed a remote resource, has authenticated itself as the machine account and was denied authorization.
    Typical example would be an ASP application running in an app pool set to use NETWORK SERVICE credential and connecting to a remote SQL Server: the app pool will authenticate as the
    machine running the app pool, and is this machine account that needs to be granted access.
    When access is denied to a machine account, then access must be granted to the machine account. If the server refuses to login 'DOMAIN\MACHINE$', then you must grant login rights to 'DOMAIN\MACHINE$' not to NETWORK SERVICE. Granting access to NETWORK SERVICE
    would allow a local process running as NETWORK SERVICE to connect, not a remote one, since the remote one will authenticate as, you guessed, DOMAIN\MACHINE$.
    If you expect the asp application to connect to the remote SQL Server as a SQL login and you get exceptions about DOMAIN\MACHINE$ it means you use Integrated Security in the connection string. If this is unexpected, it means you screwed up the connection
    strings you use.
    If this helped you resolve your issue, please mark it Answered

  • Server Error In '/' Application - Login failed for user xyz ...

    Hi, I'm brand new here 
    I would be ever grateful for help on this. It's probably something simple.
    I'm coding a website in C# ASP.NET (http://project.arcza.net). There is a registration page where you send your email, username all that stuff to an SQL server. The SQL server runs on my IIS server too. On Visual Studio, I can debug the website (i.e. launch
    it on localhost:12345) and I get a fully working website that I can register as a user and it injects into the SQL server's table. If I query the SQL server, I see the results. So it works fine here.
    The problem: if I copy the files for the website into the live IIS directory (as opposed from the Visual Studio preview environment) I get a runtime error thing, I have no idea what this means. The live IIS folder is project.arcza.net and I have disabled
    security so you can see the full workings of the probem.
    It says login failed for user 'pap'. Pap is a user I have added in SQL server, with username pap and password pap. The credentials are correct. I have added a 'connection string' (I have very little idea what this is) with thees credentials for an SQL server
    @ localhost, in IIS manager.
    Thank you and if you have any idea I'd be very happy.
    I should also point out that if I edit properties of pap in SQL server's login thing where it lists the accounts, I cannot save the settings (you know the ones where you give it permissions to access, delete, etc?) I can tick them and click okay but if I
    reoped properties and click on (I think off the top of my head it's called 'securities' but I may be wrong, it's 2nd from the bottom of the pane on the left) I see the tickboxes remain unticked. Could this have something to do with the "login failed for
    'pap'" message I'm seeing?

    Have a look at
    Errorlog. you should get reason of login failed for user.
    Balmukund Lakhani
    Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
    This posting is provided "AS IS" with no warranties, and confers no rights.
    My Blog |
    Team Blog | @Twitter
    | Facebook
    Author: SQL Server 2012 AlwaysOn -
    Paperback, Kindle

  • Error "Account assignment 00 for  purchase document does not exist " when u

    Hai,
    I am encountering the following problem when posting a PO based Invoice using BAPI_INCOMINGINVOICE_CREATE.
    The error says " account assignment 00 for purchasing document does not exist".
    The scenario is very simple.  I need to raise an Invoice against a PO. the PO has a single line item of quantity 10 net price 10.  Tax code is U2 ( 7% tax).
    I am passing the following at header level.
    Invoice_indicator ( as 'X'),company code,doc date , posting date, gross amount (107, currency USD, calc tax indicator as 'X'.
    At line item i am passing Invoice document item 000001, po number , po item number, tax code(U2) item amount (100),
    Does this error has got any thing to relate configuration matters?
    Regards,
    Upender

    Hi Upender,
    In some cases, depending on the type of PO / Posting,
    you might have to populate the accounting data itab and pass in the BAPI parameter.
    you can select the accounting data from EKKN for the PO.
    Again it depends on the PO category, wether you need to populate Qty & Unit in accounting data.
    Further, the accounting data should be exactly the same as there in EKKN ( all the fields except Qty & Unit ).
    Thanks,
    Ram

  • Error in FB60 - Additional account assignment required for field BSEG-HBKID

    Hi Experts
    While posting an Invoice for a particular company code in FB60, we are facing the following error :
    "Additional account assignment required for field BSEG-HBKID"
    Message no. F5A122
    Diagnosis
    Additional account assignment has to be carried out for some fields on the detail screen.
    System Response
    Error message
    Procedure
    Select the relevant items and call up the detail screen.
    We are unable to post any Non PO Based Invoices in this company code.
    Kindly guide us on possible methods to rectify this error.
    Regards
    MM

    Dear,
    First Check the setup as described by Atif,
    Also in OBC4 you will not find HBKID field, for this u need to select appropriate FSG, Under Payment Transaction Group please check if own Bank field is optional or not. by doing this as optional system will show House ban Field in Payment Tab of FB60, will be enabled and there will be two field one for House Bank and Other will be for Account ID.
    Hope this helps.
    Br, Vivek

  • Essbase Error 1051440 - Authentication fails for user admin

    We are facing a very unique problem...
    The application is up & running.. even I can login into the application, can perform member addition, editing & mamage database from planning.... but I get this error while retreiving from excel addin or running scripts.
    What I analysed is that this problem is Actually coming when a particular set of members are called anywhere either in scripts or during retreival thru Addin.
    Recently we had added one dimension in one of the database of our application. After that that this problem started.
    There were fewer Xref functions used to pull data from other cubes.... The problem is cominng with only those set of members where this Xref function has been used.
    Even I had changed the formulas & incorporated member of new dimension in the formulas to point to target members....
    Can you guys ever had faced such kind of issue....
    Please help in resolving....
    Complete Error is: msg fromremote site[date n time] Local////Error(1051440) Essbase user[admin] Authentication fails against shared services serverwith Error[30:1005:Authentication failed for user admin. Enter valid credentials.]]

    Hi,
    are you sure that user "admin" has all necessary rights to run your scripts? I have to ask because we sometimes had problems with our admin user... There is an "native essbase server admin" and the admin user in shared services.
    We dont had any idea how this could happen but sometimes our admin user changed to the mentioned "native essbase server admin" - you can see it if you are connected as "admin (internal)".
    If you are logged in as "admin (internal)" you have to "externalize" this user.
    Hope this helps and my bad english is not so much confusing... :-)
    Kind regards
    André

  • Role Provisioning failed for System(s) : Connector Name . Error Message : malformedRequest

    Hi Everyone we are facing following issue in GRC-SAC-SAE 5.3_16.3. So far our CUP was connected to Enterprize portal (7.01) and auto provisioning for group to users worked. However now it is not working with below error.
    Role Provisioning failed for System(s) : <Connector Name>. Error Message :
    malformedRequest
    Failed request now
    Successful request used to provision
    Regards,
    Arpan Paik

    Arpan,
    We used to get those "malformed request" errors. We dealt with them by requesting the portal to be re-booted during the weekend maintenance window, making the portal security changes manually, cancelling the CUP request and notifying the requester. It's not a great solution, I know, but it was all we could come up with at the time. Then they upgraded the portal to NW 7.31, which is incompatible with GRC 5.3, and we have to do everything manually, so our situation went from bad to worse. Good luck!
    Cheers,
    Gretchen

  • Getting error in ME22 " Account assignment mandatory for material"

    Hi SAP Gurus,
    In ME22 tansaction I am entering 1 new line item, and system is not allowing and throwing error as " Account assignment mandatory for material:8121-1045 ( Enter account assignment catagory) but user dont want entering account assignment is mandatory. Please give your input on this issue.
    Thanks,
    Sharan.

    Hi Sharanappa
    The account assignment catagory becomes Mandatory when
    "Value Updating" is Not selected for the particular valuation Area for the Material Type
    For Maintaing the same pls follow the below Path
    SPRO>LOGICTICS GENERAL>MATERIAL MASTER->BASIC SETTING->MATERIAL TYPES-->DEFINE ATTRIBUTES OF MATERIAL TYPE
    Regards
    Vikrant

  • Error in db13 SXPG_COMMAND_EXECUTE failed

    Hi
    I have ecc6 ehp4 with oracle on windows this is cluster environment, I have installed standalone gateway on node2 successfully as per note 657999 and its up & running
    When I keep db and application on separate nodes I cannot schedule any job in db13 I am getting error as below
    Job started
    Step 001 started (program RSDBAJOB, variant &0000000000039, user ID TABRAYZ)
    Execute logical command BRCONNECT On host SAPFNP
    Parameters: -u / -jid CHECK20110727155211 -c -f check
    Can't exec external program (No such file or directory)
    WaitForSingleObject failedwith %d (No such deviceor address)
    SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: unknown
    Job cancelled after system exception ERROR_MESSAGE
    Please help me guys.
    Thanks
    Abdul Tabrayz

    Hi,
    there are two things that you need to make sure:
    1) Make sure your RFC for sxpg should run on gateway host of virtual db in SM59.
    2) Please make sure that you should have set additional env variable as per SAP note 378648 for user <sid>adm.
    Thanks
    Sunny

Maybe you are looking for