Error : You 're not permitted to perform this action - Absence Report

Dear all, I need some help here,
My user need to open "Inventory in Warehouse" report. Basically, he could open aforementioned report (parameter selection), but after he click "OK" button, SAP subsequently show error message as below
You 're not permitted to perform this action - Absence Report
I have already grant "Full Authorization" for "Inventory in Warehouse" report (indeed, my user could already open "Inventory in Warehouse" forms, problem occurs after he click "OK" button)
Its pretty confusing for me, because this only occurs for "Inventory in Warehouse" report only. It doesn't occurs for "Inventory Posting List" report or for instance "Inventory Status" report. It only occurs for "Inventory in Warehouse" report.
Some advice would be appreciated here.
Thanks in advance.

Hi Iwan...........
You have two modules to be authorised to your users for that. One is Inventory module and give authorisation to inventory reports. And second is Reports module in which again you have to give authorisation to the same inventory reports sub module.
I hope this will work out.
Regards,

Similar Messages

You are not permitted access to this workstation at the moment. Please contact y

Showing error "
You are not permitted access to this workstation at the moment. Please contact your IT administrator.
This topic first appeared in the Spiceworks Community

Showing error "
You are not permitted access to this workstation at the moment. Please contact your IT administrator.
This topic first appeared in the Spiceworks Community

When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

If you'd asked a question in your original post it might have solicited more pertinent responses. As it is, you were stating a fact. No one knew whether you considered that fact a problem, or what you were hoping to gain by doing so.
The simple addition of 'can anyone help me fix this so I can run Terminal' would have counted for a lot.
As it is, your solution is likely to require the Terminal, so you're going to need to fix that one way or another. The simplest would be to create a new admin account (System Preferences -> Users & Groups) then log in using that account.
Then try and launch the terminal. If that works the problem is specific to your original account and can likely be fixed via some command-line tweaking. I'd start with:
dscl . read /Users/<username>
(where <username> is the short name of the account having a problem). This will show the records in the directory data for your account, one of which will be UserShell. Chances are that value is invalid, or missing, and can be corrected via:
sudo dscl . -change /Users/<username> UserShell <currentValue> /bin/bash
(where <currentValue) is the current setting for UserShell) which will change the user's shell to /bin/bash (the default).
Of course, you might already know this and already tried, but since you didn't say so in your original post it's worth checking.

You have no permission to perform this action.

Hi All,
I created a new role for out IT Help which has just one Iview to unlock the users. I assigned this roe to a dummy user just to test. when i navigate to the Workset of which this Iview is part of I get this error on this Iview 'You have no permission to perform this action.'.
this is the Iview which i Copied from the PCD as a delta Link to my foder.
'pcd:portal_content/com.sap.pct/admin.templates/iviews/com.sap.portal.lockedUsers'.
Help will be greatly appriciated.
thanks
amandeep

In the role Property i changed the Property Manage_all to 'Yes'. Works now.
thanks
Amandeep

How do I resolve: You are not permitted to open this document. It may be assigned to another user."

I am the only user on a computer, and have ordered two codes on line, and used them for a long time. Recently redid hard drive, and now I cannot open those two files only. I get the message: "You are nbot permitted to open this document. It may be assigned to another user." I am the only user, and maybe the name of the computer is different. How can I resolve this by accessing what permission and what user it is talking about.
Thanks to anyone who may be able to assist.
Gary

Thanks for your answer, however the user currently have the next configuration to sales documents flow:
Sales - A/R     Various Authorizations
Sales Quotation     Read-Only
Sales Order     Read-Only
Purchase Order Confirmation     Read-Only
Delivery     Read-Only
Return     Full Authorization
A/R Down Payment Invoice     Full Authorization
A/R Invoice     Full Authorization
A/R Invoice + Payment     Full Authorization
A/R Credit Memo     Full Authorization
A/R Reserve Invoice     Full Authorization
Document Generation Wizard     Full Authorization
Document Draft     Read-Only
Document Printing     Full Authorization
Dunning Wizard     No Authorization
Execute a dunning run     No Authorization
Sales Reports     Full Authorization
Sales Analysis     Full Authorization
Backorder Report - Selection Criteria     Full Authorization
Checking the configuration, this user can create for example AR invoices, but could not see previous records and neither the created by him. Using the Open Item list, the user can see the documents but can not open it. In the other hand the system has not activated the data onwership function.
Regards,
Manuel

FR Studio 11.1.1.3 : You're not authorized to use this function...

Hi,
we have FR Studio (client, v. 11.1.1.3.0238 and Report Server v. 11.1.1.3.0.0301) distributed on Citrix terminal server (windows 2003 32-bit) and on latest 2 prod servers we have this error "You're not authorized to use this function. Contact your administrator." appearing.
On QA server FR Studio works fine, we had an issue there when we forgot to set ports
8295-8299 to "listening mode" = they were not defined on FR server's FR_servp.properties config files.
This is also fixed on Prod FR servers and we have double checked firewalls are open.
After adding them to QA FR servers we had no issues with FR Studio on QA, but on PROD the issue still exists.
We have also checked that this shouldn' have anything to do with authentication.
Odd thing is that we get at least partially same sort of error messages on both working and non-working FRClient.log files.
On FRClient.log there are for example following records:
08-04 09:26:11 ERROR ConfigResourceBundle Could not find fr_configcache.properties file
08-04 09:26:11 ERROR SerializableResourceBundle Could not get registry instance
08-04 09:26:11 ERROR SerializableResourceBundle java.io.FileNotFoundException: C:\Apps\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
com.hyperion.hit.registry.exceptions.RegistryException: java.io.FileNotFoundException: C:\Apps\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
 at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:158)
 at com.hyperion.hit.registry.RegistryConnection.getInstance(RegistryConnection.java:155)
 at com.hyperion.hit.registry.Registry.getInstance(Registry.java:309).....
Caused by: java.io.FileNotFoundException: C:\Apps\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
 at java.io.FileInputStream.open(Native Method)
 at java.io.FileInputStream.<init>(FileInputStream.java:106)
 at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:151)
 ... 15 more
08-04 09:26:11 ERROR HRResourceBundleFactory Could not locate registry
08-04 09:26:11 ERROR HRResourceBundleFactory 5500
com.hyperion.reporting.util.HyperionReportException: Server not yet configured. Please configure the server.
 at com.hyperion.reporting.config.ConfigResourceBundle.<init>(Unknown Source)
 at com.hyperion.reporting.config.ConfigResourceBundle.getInstance(Unknown Source)
 at com.hyperion.reporting.config.HRResourceBundleFactory.getConfigBundle(Unknown Source)...
That propably gives already an idea what FR Studio is logging.
Does anyone have idea about this .properties file for frconfig cache?
Should that be defined somehow during system configuration as we don't find that from any of our environments?
Just for additional info:
We have used following packages and installed HFM Admin Client, FR Studio and EPMA File Generator GUI.
• 02. installer - V17382-01.zip
• 03. foundation 1 of 4 - V17397-01.zip
• 03. foundation 2 of 4 - V17369-01.zip
• 04. architect - V17398-01.zip
• 08. financial reporting - V17378-01.zip
• 11. financial management - V17365-01.zip
Patches:
+ hfm_11113_50-p9976978_111130_WINNT.zip
+ financial reporting_11113_20-p9657652_11113_WINNT.zip
During the installation we selected:
Foundation \
Performance Management Architect\Performance Management Architect File Generator
Financial Management\
Financial Management Client
Financial ManagementADM Driver
Financial Reporting\
Financial Reporting Studio Client
I noticed that apparently no configuration was run neither in QA or in PROD, not sure though if FR Studio even requires that? HFM Admin Client does work on all environments Citrix servers.
But in Dev and LAB where FR Studio is working fine - FRClient logs absolutely no recods at all and there we did run configuration to tell which SQL db is on background.
Not sure though whether that config run has any significance for FR Studio.
Sorry for extremely long story, but just in case if anybody has faced similar issues and whether there could be something with Windows server settings I should go and check?
Btw... even adding this fr_configcache.properties manually (to try to highlight FR server name and port) it seems FR Client can't find the file.
Br, MJK

Denis,
Thank you for the prompt reply.
>
Denis Konovalov wrote:
> if those reports were saved with security - you're not goingt o be able to open them with Xi3.1 Deski.
Forgive me for my mundane question but what does saving with security mean?
Thanks

Root cause of error " Access denied. You do not have permission to perform this action or access this resource" - workflow - SharePoint 2013

Good evening, technet community
I hope you are doing well.
When configuring my SharePoint workflow, I encounter the problem below:
Problem Description:
Let's say my domain is: test.com, my group user is: test\group , my user is: test\user1
Except an admin account with full control at both "Web Application" and "Site Collection", all others account all have problem when creating a list item. After creating a list item, the workflow status is "cancelled" immediately
with the following message:
RequestorId: 262a35e4-99f4-40f0-929b-5d04b415f147. Details: System.ApplicationException: HTTP 401 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["10"],"SPRequestGuid":["262a35e4-99f4-40f0-929b-5d04b415f147"],"request-id":["262a35e4-99f4-40f0-929b-5d04b415f147"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Thu, 06 Nov 2014 12:14:28 GMT"],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["NTLM"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
{"error":{"code":"-2147024891, System.UnauthorizedAccessException","message":{"lang":"en-US","value":"Access denied. You do not have permission to perform
this action or access this resource."}}} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor,
BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
- The workflow is still fail even I assign "full control" to my users group "test\group" – at Site Collection level.
Surprisingly, I have successfully found a solution for this error message. However, I still have some points that I do not clearly understand. Let's start with my solution first.
Solution:
*** i. Assign permission policy at Web Application level – Central Admin site ***
1. Central Administration ==> Application management
==> Manage Web application
2. Go to "permission policy", then create a new permission level. This permission level contains all "edit item" permission.
3. Select "user policy", then I assign it directly to my user account: test\user1.
*** ii. Assign "edit item" permission at Site Collection level ***
1. Site Setting ==> Site permission
2. Assign "Edit" permission to my test\group.
(Actually I removed all permissions of my user group at Site Collection level. It seem my group has inherited permission from Web Application level, is that correct? )
*** iii. Create a new list item and workflow runs ……. ***
==> My question is:
1. Why I cannot assign permission to my users group - "test\group" -
at "Web Application" level? Instead I have to assign permission policy for each users, one by one?
2. Could you please let me know how to collect full detail error message of workflow status?
Thank you very much! Have a nice weekend.

Thank you for your very detail response.
Point 1: Yes my 2 service: user profile & profile sync service are running. I performed "full synchronization" as well. Actually i've tried 3 another action plans before coming up with the solution i posted:
*** Actions completed ***
1. Activate the feature: workflow can use app permissions.
Site actions > Site Settings > Site features >activate the feature below:
Workflows can use app permissions
2.
Refresh trusted security token services metadata feed
Get-SPTimerJob
"RefreshMetadataFeed"
| Start-SPTimerJob
- then restart the machine.
3. Start full user profile synchronization.
Point 2:
- Yes my user had Edit permission at workflow task list + list affected by workflow.
I have just remove all permissions of my user at "Site Collection" level. However, when i show my user permissions at my workflow task list and my users still have "Edit" Permission ( assigned at Web Application level. These permissions
still exist even after my workflow task list stop inheriting permission).
==> the problems probably belongs to "permission" at "Site Collection level". It seems "permission level at my Site Collection does not work". All users accounts are also suffer from the same issues except farm admin account
( which has full control at Web Application level).
I would appreciate if your guys can guide me how to make "permission" at my "Site Collection level" work again?
Thank you very much.

Essbase error:You do not have sufficient access to perform a lock on this..

Hi all,
I tried to retrieve the members in the spreadsheet addin client and I am getting the error as follows:
Essbase error: You do not have sufficient access to perform a lock on this database.
But Iam trying to do only a retrieve operation. Essbase version is 9.3.0.1.02 and OS is windows XP.
Also under Essbase->options->Mode tab, the check box update mode was unchecked.
I was able to do the operation before without any error and suddenly Iam facing this issue.
Can anyone help me on the above
Thanks in advance,
Raja

Hi Raja,
Check this out../
Weird problem regarding Essbase Excel plug in
It might help
Regards
Amarnath

Error: You do not have sufficient access to perform a lock on this database

Hi,
Can anyone help on this.
When user try to load data through Excel it throws the following error "You do not have sufficient access to perform a lock on this database"
We are using Essbase 6.5.
We have tried following options
FIX1:
In Microsoft Excel, under ESSBASE -> OPTIONS, under the MODE tab, the check box UPDATE MODE is checked.
When the UPDATE MODE check box is selected retrievals will automatically lock the corresponding database area with each retrieval. Disable Update Mode to stop locking blocks automatically. In update mode, the Send command (which updates the server with data values from the spreadsheet) does not automatically unlock data after the send.
1. Launch Microsoft Excel
2. Select ESSBASE -> OPTIONS
3. Select the MODE tab
4. Uncheck "Update Mode" to return to normal mode
This error is seen when trying to lock and send data via the Hyperion Essbase Spreadsheet Add-in into that fall within a replicated target partition definition
1. Go to HYPERION APPLICATION MANAGER -> DATABASE -> PARTITIONMANAGER
2. Select the relevant partition
3. Select EDIT
4. On the CONNECT TAB, select SETTINGS and tick the option THETARGET PARTITION CAN BE UPDATED
Also gave write access to that user.
Can anyone give another possible solutions.
With thanks,
babu

Hi Raja,
Check this out../
Weird problem regarding Essbase Excel plug in
It might help
Regards
Amarnath

Error: "You do not have suffficient access to perform a lock on this database

Hi, I have a problem with Essbase Excel Add-in, i can´t retrieve because appears this error: Error: "You do not have suffficient access to perform a lock on this database Plese, help me. Idon´t have speak inglish.

If the problem is limited to a single PC, I would suggest that you uninstall the Essbase client on that PC, reboot, and the reinstall the client including the addin. It appears that some sort of macro is running on that PC that does teh login in update mode. I'd also remove all copies of any excel spreadsheets that might be involved, copying a clean version from another PC. If you are using any third-party tools, like toolbars or other addins for excel and essbase, I'd clean them out also. You haven't said whether a login from an new, blank spreadsheet works. If it does, the problem is in the spreadsheet you are using to retrieve the application, otherwise, the problem may be in a corrupted add-in, or even possibly with your excell installation. It's hard to diagnose a problem when you haven't given us any more information about the problem. You haven't really answered any of the questions we've asked about behaviour and whether the problem existsin certain other circumstances. I'm certain that if language is a problem, someone might be able to help you in some language other than English, but generally this forum works in English because it a a common language in the Hyperion community.

Getting this error while opening a folder : This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel

Hi,
While trying to open a folder on my Windows 7 Home Premium, an error comes "This file does not have a program associated with it for performing this
action. Please install a program or, if one is already installed, create an association in the Default Programs control panel." I tried searching on the net but did not get great support for the issue when it happens with folder opening.

Hi Nikunj Shah,
First, I suggest you download
Microsoft Safety Scanner or
Malicious Software Removal Tool to run a full scan.
The error messages here seems to be caused by the corrupted registries, which related with the folder association.
You may take a try to merge the following registry settings to reset the folder association, before that, remember to backup your registry settings first:
How to back up and restore the registry in Windows
Copy and paste the following commands into Notepad, and save it to a .reg file:
=================
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Folder]
"ContentViewModeLayoutPatternForBrowse"="delta"
"ContentViewModeForBrowse"="prop:~System.ItemNameDisplay;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;System.DateModified"
"ContentViewModeLayoutPatternForSearch"="alpha"
"ContentViewModeForSearch"="prop:~System.ItemNameDisplay;System.DateModified;~System.ItemFolderPathDisplay"
@="Folder"
"EditFlags"=hex:d2,03,00,00
"FullDetails"="prop:System.PropGroup.Description;System.ItemNameDisplay;System.ItemTypeText;System.Size"
"NoRecentDocs"=""
"ThumbnailCutoff"=dword:00000000
"TileInfo"="prop:System.Title;System.ItemTypeText"
[HKEY_CLASSES_ROOT\Folder\DefaultIcon]
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,00,68,00,\
65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\explore]
"MultiSelectModel"="Document"
"ProgrammaticAccessOnly"=""
"LaunchExplorerFlags"=dword:00000018
[HKEY_CLASSES_ROOT\Folder\shell\explore\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\open]
"MultiSelectModel"="Document"
[HKEY_CLASSES_ROOT\Folder\shell\open\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,45,00,78,00,70,00,6c,00,6f,00,72,00,65,00,72,00,2e,00,65,00,78,00,\
65,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess]
"MUIVerb"="@shell32.dll,-8518"
"MultiSelectModel"="Document"
"Extended"=""
"LaunchExplorerFlags"=dword:00000003
"ExplorerHost"="{ceff45ee-c862-41de-aee2-a022c81eda92}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow]
"MUIVerb"="@shell32.dll,-8517"
"MultiSelectModel"="Document"
"OnlyInBrowserWindow"=""
"LaunchExplorerFlags"=dword:00000001
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\BriefcaseMenu]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Library Location]
@="{3dad6c5d-2167-4cae-9914-f99e41c12cfa}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Offline Files]
@="{474C98EE-CF3D-41f5-80E3-4AAB0AB04301}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\DragDropHandlers\{BD472F60-27FA-11cf-B8B4-444553540000}]
@=""
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\BriefcasePage]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\Offline Files]
@="{7EFA68C6-086B-43e1-A2D2-55A113531240}"
[-HKEY_CLASSES_ROOT\Folder\ShellNew]
[HKEY_CLASSES_ROOT\Folder\ShellNew]
"Directory"=""
"IconPath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\
74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\
00,68,00,65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,\
00,00
"ItemName"="@shell32.dll,-30396"
"MenuText"="@shell32.dll,-30317"
"NonLFNFileSpec"="@shell32.dll,-30319"
[HKEY_CLASSES_ROOT\Folder\ShellNew\Config]
"AllDrives"=""
"IsFolder"=""
"NoExtension"=""
==================
Once done, right-click the REG file and choose Merge. Alternately, you can open the Registry Editor and then using the
Import option from the File menu, to merge the REG file contents.
Let me know if you need any further help.
Best regards
Michael Shao
TechNet Community Support

ITunes installation error: does not have program associated with it for performing this action

Repeated tries to install iTunes continues to fail. Installing on Acer laptop using Windows 7.
Error: does not have program associated with it for performing this action
We have done the following: open Default programs, clicked associate a file type, clicked on change program button and selected a program to open with and clicked OK/enter.
The installation continues. we get to the finish window; click finish.
Next error: iTunes has been installed incorrectly.
So, what do we do to get iTunes working?
Thank you.

Hi normeagle,
Welcome to Apple Support Communities.
You may find this article helpful for troubleshooting your iTunes installation:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Best,
Jeremy

Essbase add-in error:You do not have sufficient access to perform a lock

Hi,
I have a user who is doing a retrieve in Excel and is getting this error on v.9.3.1:
Essbase Error: "You do not have sufficient access to perform a lock and send on this database".
The user is just doing a retrieve, no lock and send.
I asked him to disable 'update mode' in add-in options (Mode tab) on each of his sheets.
But when he open a new sheet/document Excel 2007, the 'update mode' is enabled by default.
Where can we change that ? Is there a command to put in a .ini file?
I check all the threads but there no answer on how to change this default setting.
Thanks for your help,
Marie.

Hi Raja,
Check this out../
Weird problem regarding Essbase Excel plug in
It might help
Regards
Amarnath

Can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action.

Hi,
I can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action. I can access CRM with same user id and password from our office inside the network. I can get
the page to give login details once I have login details I got below error. Please help me to solve this issue. It was working before.
Access denied You do not have sufficient access rights or privileges to perform this action.
Regards,
Noushad
[email protected]

On Premise system Configured with AD FS server for claims-based authentication you need to update your host file with server url to access it from outside office network.
Refer
this on how to update host file.
Regards, Saad

On windows 7 I receive this error while installing error: "You do not have sufficient privileges to

error: "You do not have sufficient privileges to perform the requested action."
The resolution on the other thread did not work for me. What could be wrong? I have installed Adobe Flash Media Live before without an issue but after I reformatted my PC I keep receiving this. Thanks in advance.

I've solved it,
Change the permissions on the file (sudo chmod 755 httpd.conf)
then
sudo nano httpd.conf
and it works fine
thanks alot for your help

Error : You 're not permitted to perform this action - Absence Report

Similar Messages

Maybe you are looking for