Error: Your browser is unable to perform strong encryption.

I received the following message while trying to log onto my credit union:
Your browser is unable to perform strong encryption. For your protection, we require 128 bit encryption in order to secure your banking session.
Please upgrade your browser to Internet Explorer 5.5+ or Netscape Navigator 4.73+
Anyone have any suggestions?

Hi,
Try enabling the 'Develop menu' via Safari preferences > Advanced. Once the menu is available, try selecting a different User Agent setting such as Internet Explorer.
It sounds like your credit union is doing some kind of basic browser checking and their checks don't recognise Safari. If that change does work make sure you notify them of the problem and hopefully they'll add Safari as a recognised browser.

Similar Messages

Error Your browser/program is not supported by Web Dynpro

Hi,
1. I am getting error "Your browser/program is not supported by Web Dynpro" while executing Web dynpro java application
2. Portal is EP 7.0 with SP15
3. Browser is IE 8.0
4. Which browser(s) (& sp level) are supported by web dynpro?
5. Is it possible to customize this error message?
6. If so, from where (Web dynpro java application or Visual Admin)
7. My web dynpro application supports multiple languages.
8. Is it possible to maintain this message in messagecomponent.xlf file
Thanks & regards,
Nilesh

Hi Nilesh
IE8 and IE7 is not supported.
For browser/program is not supported by Web Dynpro----
check this forums link
/message/6416540#6416540 [original link is broken]
/message/2842083#2842083 [original link is broken]
Re: browser/program is not supported by Web Dynpro!
Hope this link information will help you
Regards
Ruturaj

Error in Opening Worklist -"Unable to perform the request.............."

Hi,
On clicking on Worklist in portal, a user is getting the following error:
"Unable to perform the request. Try again. If the problem persists, inform your system administrator" error .
Any pointers will be of great help.
Please let me know how should I go about to solve this problem

You see this error in a lot of situations. Where exactly is this issue happening ? (clicking on item or clicking on attachment....)
Check the UWL log and post more details. You may choose to increase the log severity to ALL.
1. You may try to assign the user more authorizations and check if it fixes the issue.
2. Make sure that the work item is still valid in the corresponding backend system.
3. Based on your UWLJWF version - check for available SAP Notes
4. If you have not already implemented, try to implement sapnote_0001133821 - UWL Destination Service Configuration
5. Make sure that the user id validity is far enough in the future in the backend system
6. Upgrade to the latest support pack
Thanks,
Shanti

JSP Designer: Error: "Your browser is not JavaScript enabled"

Oracle jDeveloper 11g 11.1.1.0.2
FireFox 3.5b4
IE 7.0.5730.13
In the design view of an xml document created from the faces-config I'm getting an error that JavaScript is not enabled.
"This page uses JavaScript and requires a JavaScript enabled browser. Your browser is not JavaScript enabled.
I did not see an option to change the default browser in jDeveloper.
I know that JavaScript is enabled in both browsers.

Hi,
this randomly happens to me as well and the way to resolve the issue is to delete the "systems" directory of JDeveloper and restart the IDE. I wished there was a way to always reproduce this behavior
Frank

When using the online editor in our wordpress blog on any other online editor I get this error "Your browser security settings don't permit the editor to automatically execute cutting operations. Please use the keyboard for that (Ctrl+X)" Please help.

I have online editors for our blog and websites for generating articles and blog posts. Different editors from different sites and programmers. Firefox doesn't allow me to use the cut/paste/copy functions with these editors. I get this message or something similar every time. "Your browser security settings don't permit the editor to automatically execute cutting operations. Please use the keyboard for that (Ctrl+X)"

See:
*http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
*https://addons.mozilla.org/firefox/addon/852 - AllowClipboard Helper

In printer services error message says "unable to perform this operation"

when I try to check my ink levels in the printer services area, an error message comes up "unable to perform this operation"
I have deleted and reinstalled my printer. I have downloaded the lastest driver--all to no avail

Please read this post then provide some details. What printer model? What operating system?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Unable to remove a host from VMM - Error (2606) Unable to perform the job because one or more of the selected objects are locked by another job.

I am unable to remove a host from my Virtual Machine Manager 2012 R2. I receive the following error:
Error (2606)
Unable to perform the job because one or more of the selected objects are locked by another job.
Recommended Action
To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
I have already tried running the following command in SQL Server Management Studio
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
I received this error back:
Msg 8169, Level 16, State 2, Line 1
Conversion failed when converting from a character string to uniqueidentifier.
I have also tried rebooting both the host and the Virtual Machine Manager Server. After rebooting them both, I still receive the same error when trying to remove the host.
Here are my server details
VMM Server OS = Windows 2012 Standard
VMM Version = 2012 R2 3.2.7510.0
Host OS = Windows 2012 R2 Datacenter
Host Agent Version = 3.2.75.10.0
SQL Server OS = Windows 2012 Datacenter
SQL Version = 2012 SP 1 (11.0.3000.0)

Hi there,
How many hosts are you managing with your VMM server?
The locking job might be the background host refresher job. Did you see any jobs in the jobs view, when the host removal job failed?
If there is no active jobs in the jobs view when this host removal job fails, can you please turn on the VMM tracing, retry the host removal, and paste back the traces for the failed job (search for exception and paste the whole stack)?
Thanks!
Cheng

Unable to perform the request error while selecting completed tasks in UWL

Hi,
When user is selecting the Completed Task in the UWL, the below error is displaying
error: Unable to perform the request. Try again and if the problem persists, inform your system administrator.
While selecting completed tasks in the drop down, it is showing "Completed Tasks(30)". But after selecting "Completed Tasks(30)" from the drop down, the above error message is getting.
How can we resolve this??
Note: We are using EP 7.0 SP 17. When I checked in sdn, I found that there is a problem with completed tasks earlier to sp14. But in SP14, this issue was fixed. But why we are facing this issue?
Thanks,
VV

Hi,
Please let us know if you can found any relevant logs on
1) dafault.trc file
<Drive>:\usr\sap\<sys-id>\JC<inst-no>\j2ee\cluster\server0\log\
2) UWL logs:
usr\sap\<version>\JC00\j2ee\cluster\server0\log\applications\sap.com\u
wl
Also Have a look on note 1120556.
Please remember to evaluate the replays, this incentive the SDN to keep growing,
regards,
Fabio

Getting error message "unable to perform in-app purchase"

I have been trying to renew the subsription on the Sun app on my iPhone 4 but i am getting the error message "Unable to perform in-app purchase", I have money in my account, i have turned my phone off and back on and restarted it. Also my internet connection is fine. I cant work out why it won't make the purchase when i have had this app for a few months now and have always been able to renew my subscription each month without any issues, any idea why this could be happening?
thanks =)

Did you check your restrictions?

Troubleshoot Error - Unable to perform table-based value assignment config

After to creating class, characteristics, and value assignment type, the system is unable to perform table-based value assignment configuration. The following error is displayed:

Hi Mr. SAP,
Based on the diagnosis, you can figure out that most likely someone is already editing the customizing table or might you are not authorized..
In case if you have the access to SM12 Transaction code, kindly check if an entry present there. If yes it means the table is locked and you can't proceed on that. you have to reach out to the specific resource to unlock the table who did a lock, else you need to reach out to BASIS to make that entry delete.
Regarding authrization for locking of table, please check SU53 after the execution of the T-code, if you are missing any role. If you find anything there, then reach out to your Security team to get and assigned roles to your profile.
Regards,
Abhi

Cookie error message for online college course...cuyamlp We detected that the following feature of your browser is turned off: Cookies Cookies are sto

The error message is below and its been the same on firefox, chrome and internet explorer on my same computer. All the cookies are on and accpeted on all three. There shouldnt be a reason why Im getting this still, help!
cuyamlp
We detected that the following feature of your browser is turned off:
Cookies
Cookies are stored text files that save information about your preferences and use
of this site. The use of these cookies enables the delivery system to authenticate
your identity, password, and log the time spent within a specific course.
This feature must be turned on for optimal performance in your online course. Please
follow the instructions listed below to turn on the feature(s). (Note: you may want
to print this page, so you have the instructions in front of you while working with
the browser settings.)
Instructions for Netscape 6.2 and above and Cookies:
•Choose the Edit menu.
◦Select Preferences....
◾In the white box on the left, click once on the word Advanced.
◾Verify that the box Accept all Cookies is checked. If it is not, click in the box to enable it.
◾Click OK to return to the browser window.
◾Restart your Browser and Login.

Is the problem only on one site??
If you get the same error in all browsers, it could be your security software. Often there will be a set of privacy options that allow you to filter what is sent to sites. Can you find anything like that and see whether any cookies are blocked, such as "third party" cookies?
In case the message is referring to Flash Local Storage Objects (sometimes called supercookies) instead of regular browser cookies, you can check your Flash storage settings on these pages:
* General setting: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html
* Site-specific settings: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html

Exchange 2013 EAC shows "error Sorry, your request couldn't be completed. Try deleting the cookies from your browser, and then sign in again. If the problem continues, contact your helpdesk."

Hi,
My Exchange 2013 Hybrid environment is at CU5 level. Multiple administrators have started experiencing the error message
"error
Sorry, your request couldn't be completed. Try deleting the cookies from your browser, and then sign in again. If the problem continues, contact your helpdesk."
It only started two weeks ago and did not coincide with any infrastructure changes. The message occurs when clicking anything on the EAC GUI and it eventually allows you to perform the operation but only after the message
pops up a few times.
I have tried clearing the browser cookies, history, etc. Note that using the Office 365 EAC does not yield the same messages and it only happens in IE (IE 11).
Thanks.

Hi,
From your description, please make sure that the "Require SSL" is checked in IIS Manager -> Sites -> Exchange Back End -> ECP -> SSL Settings.
What's more, ensure that EAC site is added to the “Compatibility Mode”.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

Getting error Unable to perform transaction on the record.

Hi,
My requirement is to implement the custom attachment, and to store the data into custom lob table.
my custom table structure is similer to that of standard fnd_lobs table and have inserted the data through EO based VO.
Structure of custom table
CREATE TABLE XXAPL.XXAPL_LOBS
ATTACHMENT_ID NUMBER NOT NULL,
FILE_NAME VARCHAR2(256 BYTE),
FILE_CONTENT_TYPE VARCHAR2(256 BYTE) NOT NULL,
FILE_DATA BLOB,
UPLOAD_DATE DATE,
EXPIRATION_DATE DATE,
PROGRAM_NAME VARCHAR2(32 BYTE),
PROGRAM_TAG VARCHAR2(32 BYTE),
LANGUAGE VARCHAR2(4 BYTE) DEFAULT ( userenv ( 'LANG') ),
ORACLE_CHARSET VARCHAR2(30 BYTE) DEFAULT ( substr ( userenv ( 'LANGUAGE') , instr ( userenv ( 'LANGUAGE') , '.') +1 ) ),
FILE_FORMAT VARCHAR2(10 BYTE) NOT NULL
i have created a simple messegefileupload and submit button on my custom page and written below code on CO:
Process Request Code:
if(!pageContext.isBackNavigationFired(false))
TransactionUnitHelper.startTransactionUnit(pageContext, "AttachmentCreateTxn");
if(!pageContext.isFormSubmission()){
System.out.println("In ProcessRequest of AplAttachmentCO");
am.invokeMethod("initAplAttachment");
else
if(!TransactionUnitHelper.isTransactionUnitInProgress(pageContext, "AttachmentCreateTxn", true))
OADialogPage dialogPage = new OADialogPage(NAVIGATION_ERROR);
pageContext.redirectToDialogPage(dialogPage);
ProcessFormRequest Code:
if (pageContext.getParameter("Upload") != null)
DataObject fileUploadData = (DataObject)pageContext.getNamedDataObject("FileItem");
String strFileName = null;
strFileName = pageContext.getParameter("FileItem");
if(strFileName == null || "".equals(strFileName))
throw new OAException("Please select a File for upload");
fileName = strFileName;
contentType = (String)fileUploadData.selectValue(null, "UPLOAD_FILE_MIME_TYPE");
BlobDomain uploadedByteStream = (BlobDomain)fileUploadData.selectValue(null, fileName);
String strItemDescr = pageContext.getParameter("ItemDesc");
OAFormValueBean bean = (OAFormValueBean)webBean.findIndexedChildRecursive("AttachmentId");
String strAttachId = (String)bean.getValue(pageContext);
System.out.println("Attachment Id:" +strAttachId);
int aInt = Integer.parseInt(strAttachId);
Number numAttachId = new Number(aInt);
Serializable[] methodParams = {fileName, contentType , uploadedByteStream , strItemDescr , numAttachId};
Class[] methodParamTypes = {fileName.getClass(), contentType.getClass() , uploadedByteStream.getClass() , strItemDescr.getClass() , numAttachId.getClass()};
am.invokeMethod("setUploadFileRowData", methodParams, methodParamTypes);
am.invokeMethod("apply");
System.out.println("Records committed in lobs table");
if (pageContext.getParameter("AddAnother") != null)
pageContext.forwardImmediatelyToCurrentPage(null,
true, // retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES);
if (pageContext.getParameter("cancel") != null)
am.invokeMethod("rollbackShipment");
TransactionUnitHelper.endTransactionUnit(pageContext, "AttachmentCreateTxn");
Code in AM:
public void apply(){
getTransaction().commit();
public void initAplAttachment() {
OAViewObject lobsvo = (OAViewObject)getAplLobsAttachVO1();
if (!lobsvo.isPreparedForExecution())
lobsvo.executeQuery();
Row row = lobsvo.createRow();
lobsvo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
public void setUploadFileRowData(String fName, String fContentType, BlobDomain fileData , String fItemDescr , Number fAttachId)
AplLobsAttachVOImpl VOImpl = (AplLobsAttachVOImpl)getAplLobsAttachVO1();
System.out.println("In setUploadFileRowData method");
System.out.println("In setUploadFileRowData method fAttachId: "+fAttachId);
System.out.println("In setUploadFileRowData method fName: "+fName);
System.out.println("In setUploadFileRowData method fContentType: "+fContentType);
RowSetIterator rowIter = VOImpl.createRowSetIterator("rowIter");
while (rowIter.hasNext())
AplLobsAttachVORowImpl viewRow = (AplLobsAttachVORowImpl)rowIter.next();
viewRow.setFileContentType(fContentType);
viewRow.setFileData(fileData);
viewRow.setFileFormat("IGNORE");
viewRow.setFileName(fName);
rowIter.closeRowSetIterator();
System.out.println("setting on fndlobs done");
The attchemnt id is the sequence generated number, and its defaulting logic is written in EO
public void create(AttributeList attributeList) {
super.create(attributeList);
OADBTransaction transaction = getOADBTransaction();
Number attachmentId = transaction.getSequenceValue("xxapl_po_ship_attch_s");
setAttachmentId(attachmentId);
public void setAttachmentId(Number value) {
System.out.println("In ShipmentsEOImpl value::"+value);
if (getAttachmentId() != null)
System.out.println("In AplLobsAttachEOImpl AttachmentId::"+(Number)getAttachmentId());
throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
getEntityDef().getFullName(), // EO name
getPrimaryKey(), // EO PK
"AttachmentId", // Attribute Name
value, // Attribute value
"AK", // Message product short name
"FWK_TBX_T_EMP_ID_NO_UPDATE"); // Message name
if (value != null)
// Attachment ID must be unique. To verify this, you must check both the
// entity cache and the database. In this case, it's appropriate
// to use findByPrimaryKey() because you're unlikely to get a match, and
// and are therefore unlikely to pull a bunch of large objects into memory.
// Note that findByPrimaryKey() is guaranteed to check all AplLobsAttachment.
// First it checks the entity cache, then it checks the database.
OADBTransaction transaction = getOADBTransaction();
Object[] attachmentKey = {value};
EntityDefImpl attachDefinition = AplLobsAttachEOImpl.getDefinitionObject();
AplLobsAttachEOImpl attachment =
(AplLobsAttachEOImpl)attachDefinition.findByPrimaryKey(transaction, new Key(attachmentKey));
if (attachment != null)
throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
getEntityDef().getFullName(), // EO name
getPrimaryKey(), // EO PK
"AttachmentId", // Attribute Name
value, // Attribute value
"AK", // Message product short name
"FWK_TBX_T_EMP_ID_UNIQUE"); // Message name
setAttributeInternal(ATTACHMENTID, value);
Issue faced:
When i run the page for the first time data gets inserted into custom table perfectly on clicking upload button,
but when clicked on add another button on the same page (which basically redirects to the same upload page and increments the attachment id by 1)
i am getting the below error:
Error
Unable to perform transaction on the record.
Cause: The record contains stale data. The record has been modified by another user.
Action: Cancel the transaction and re-query the record to get the new data.
Have spent entire day to resolve this issue but no luck.
Any help on this will be appreciated, let me know if i am going wrong anywhere.
Thanks nd Regards
Avinash

Hi,
After, inserting the values please re-execute the VO query.
Also, try to redirect the page with no AM retension
Thanks,
Gaurav

Frm-40505:ORACLE error: unable to perform query in oracle forms 10g

Hi,
I get error frm-40505:ORACLE error: unable to perform query on oracle form in 10g environment, but the same form works properly in 6i.
Please let me know what do i need to do to correct this problem.
Regards,
Priya

Hi everyone,
I have block created on view V_LE_USID_1L (which gives the error frm-40505) . We don't need any updation on this block, so the property 'updateallowed' is set to 'NO'.
To fix this error I modified 'Keymode' property, set it to 'updatable' from 'automatic'. This change solved the problem with frm-40505 but it leads one more problem.
The datablock v_le_usid_1l allows user to enter the text (i.e. updated the field), when the data is saved, no message is shown. When the data is refreshed on the screen, the change done previously on the block will not be seen (this is because the block updateallowed is set to NO), how do we stop the fields of the block being editable?
We don't want to go ahead with this solution as, we might find several similar screens nad its diff to modify each one of them individually. When they work properly in 6i, what it doesn't in 10g? does it require any registry setting?
Regards,
Priya

Error: Your browser is unable to perform strong encryption.

Similar Messages

Maybe you are looking for