Errore connessione plantronics explorer 395

Ciao, ho configurato il nuovo iPhone 4s con auricolare plantronics explorer 395. L'installazione è andata a buon fine solo che se provo a spegnere e poi riaccendere l'auricolare, quest'ultimo non viene più visto dall'iPhone. Da considerare che funziona correttamente con altri cellulari.
Ho l'ultimissima versione ios 5.01.
Tutti mi dicono che è compatibile, ma a me non funziona, Cosa altro devo fare ???
ciao
vito

I am having the same issue with a Plantronics Explorer 245. The funny thing is that this bluetooth headset worked flawlessly with my first iPhone 4 (iOS 5.0.1). I had a warranty issue and had the phone replaced a few weeks ago. Now with my replacement iPhone 4 (iOS 5.0.1), I have to delete my headset and re-pair it every time it is turned off. Very frustrating! I'd love to know the source of the problem, and would appreciate any definitive answers. The bluetooth is several years old, so I'm willing to upgrade it so long as a different model will actually work.

Similar Messages

Plantronics explorer has to be re-paired with iphone

New iPhone4; can easily pair my Plantronics Explorer 395 bluetooth earpiece to it, but when the phone or earpiece is turned off, it will not re-connect. I have to tell the phone to "forget" this device then re-pair it to connect.

I am having the same issue with a Plantronics Explorer 245. The funny thing is that this bluetooth headset worked flawlessly with my first iPhone 4 (iOS 5.0.1). I had a warranty issue and had the phone replaced a few weeks ago. Now with my replacement iPhone 4 (iOS 5.0.1), I have to delete my headset and re-pair it every time it is turned off. Very frustrating! I'd love to know the source of the problem, and would appreciate any definitive answers. The bluetooth is several years old, so I'm willing to upgrade it so long as a different model will actually work.

Equium A60: I get error message using explorer.exe

Everytime I try to open an image file using Paint or Fax/Image viewer, or I try to drag a file into a folder I get the following error message:
"Windows Explorer has encountered a problem and needs to close. We are sorry for the inconvenience"
The error report says:
"AppName: explorer.exe AppVer: 6.0.2900.2180 ModName: rpcrt4.dll
ModVer: 5.1.2600.2180 Offset: 000847a6"
Also I cannot open webpages that open in new IE windows. Norton Internet Security 2005 also would not open, but did claim to be active in the background.
Does anyone have any advice for me?
I've tried all the help for explorer.exe problems on helpwithwindows.com but nothing they suggested worked - such as spyware, malaware removal. I've run a few online virus checks - since Norton won't work I had to try the online scans.
The laptop was bought last year, and we've lost the recovery CDs - so if we need them, then where can we get replacements?
Many thanks,
Jonathan

Hi
Well, this sound like a OS software malfunction. It's possible that some registry entries or/and data files are corrupted and damage.
However, the best solution is to recover the OS.
The other possibility is to use the "system restore" tool of Win XP.
Then you can try to roll back the OS to the early point. But if it doesnt work so the new installation is needed.
regards

Spry Validation Error in Internet Explorer

Hi,
I have a PHP form with Spry Validation for Textfields and Selction.
The init part in the HTML form looks like this:
      var spryradioanrede = new Spry.Widget.ValidationRadio("spryradioanrede", {isRequired:true, validateOn:["change,blur"]});
       var sprytextfieldvorname = new Spry.Widget.ValidationTextField("sprytextfieldvorname", "none", {isRequired:true, validateOn:["change,blur"]});
       var sprytextfieldnachname = new Spry.Widget.ValidationTextField("sprytextfieldnachname", "none", {isRequired:true, validateOn:["change,blur"]});
       var sprytextfieldstrasse = new Spry.Widget.ValidationTextField("sprytextfieldstrasse", "none", {isRequired:true, validateOn:["change,blur"]});
       var sprytextfieldhausnummer = new Spry.Widget.ValidationTextField("sprytextfieldhausnummer", "none", { validateOn:["change,blur"]});
       var sprytextfieldplz = new Spry.Widget.ValidationTextField("sprytextfieldplz", "none", {useCharacterMasking:true, pattern:"00000", validateOn:["change,blur"]});
       var sprytextfieldort = new Spry.Widget.ValidationTextField("sprytextfieldort", "none", {isRequired:true, validateOn:["change,blur"]});
       var sprytextfieldemail = new Spry.Widget.ValidationTextField("sprytextfieldemail", "email", { validateOn:["change,blur"]});
       var sprytextfieldvorwahl = new Spry.Widget.ValidationTextField("sprytextfieldvorwahl", "none", {validation:isNumeric,isRequired:false, validateOn:["change,blur"]});
       var sprytextfieldrufnummer = new Spry.Widget.ValidationTextField("sprytextfieldrufnummer", "none", {validation:isNumeric, isRequired:false, validateOn:["change,blur"]});
       var sprytextfieldausweisnummer = new Spry.Widget.ValidationTextField("sprytextfieldausweisnummer", "none", {validation:isValididentitycard, validateOn:["blur"]});
       var sprytextfieldstaatsangehoerigkeit = new Spry.Widget.ValidationTextField("sprytextfieldstaatsangehoerigkeit", "none", {isRequired:true, validateOn:["change,blur"]});
       var spryselectfieldtag = new Spry.Widget.ValidationSelect("spryselectfieldtag", {isRequired:true, validateOn:["change,blur"]});
       var spryselectfieldmonat = new Spry.Widget.ValidationSelect("spryselectfieldmonat", {isRequired:true, validateOn:["change,blur"]});
       var spryselectfieldjahr = new Spry.Widget.ValidationSelect("spryselectfieldjahr", {isRequired:true, validateOn:["change,blur"]});
When loading the page an error in Internet Explorer 8 occures:
Error Details from IE:
Benutzer-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; MDDR; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
Zeitstempel: Mon, 31 Aug 2009 08:54:38 UTC
Meldung: 'this.input.defaultValue' ist Null oder kein Objekt
Zeile: 1734
Zeichen: 2
Code: 0
URI: http://.../SpryAssets/SpryValidationTextField.js
When loading the page the first time it's not a big problem. But when the users enters some unvalid data the page lodes again and in the onload section from the body the function validateall is startet.
function validateall()    {
                status = 0;
                status += spryradioanrede.validate();
                status += sprytextfieldvorname.validate();
                status += sprytextfieldnachname.validate();
                status += sprytextfieldstrasse.validate();
                status += sprytextfieldstrasse.validate();
                status += sprytextfieldplz.validate();
                status += sprytextfieldort.validate();
                status += sprytextfieldemail.validate()
                status += sprytextfieldvorwahl.validate();
                status += sprytextfieldrufnummer.validate();
                status += sprytextfieldausweisnummer.validate();
                status += sprytextfieldstaatsangehoerigkeit.validate();
                status += spryselectfieldtag.validate();
                status += spryselectfieldmonat.validate();
                status += spryselectfieldjahr.validate();
                if (status < 15) {
                    return 0;
                } else {
                    return 1;
The error occurs again and the validation is not yet done. Which means, that the fields with problems will not be marked. When entering the field afterward and changing or blur everything works ok and the field is marked in red. Only the onload is not working.
Any ideas, what the problem is?
Thank
Michael

It seems to be an Error in Spry,
Open the SpryValidationTextField.js
find:
Spry.Widget.ValidationTextField.prototype.reset = function() {
     this.removeHint();
     this.oldValue = this.input.defaultValue;
     this.resetClasses();
     if (Spry.is.ie) {
          //this will fire the onpropertychange event right after the className changed on the container element
          //IE6 will not fire the first onpropertychange on an input type text after a onreset handler if inside that handler the className of one of the elements inside the form has been changed
          //to reproduce: change the className of one of the elements inside the form from within the onreset handler; then the onpropertychange does not fire the first time
          this.input.forceFireFirstOnPropertyChange = true;
          this.input.removeAttribute("forceFireFirstOnPropertyChange");
     var self = this;
     setTimeout(function() {self.putHint();}, 10);
and replace with:
Spry.Widget.ValidationTextField.prototype.reset = function() {
     this.removeHint();
     this.oldValue = this.input && this.input.defaultValue ? this.input.defaultValue : "";
     this.resetClasses();
     if (Spry.is.ie) {
          //this will fire the onpropertychange event right after the className changed on the container element
          //IE6 will not fire the first onpropertychange on an input type text after a onreset handler if inside that handler the className of one of the elements inside the form has been changed
          //to reproduce: change the className of one of the elements inside the form from within the onreset handler; then the onpropertychange does not fire the first time
          this.input.forceFireFirstOnPropertyChange = true;
          this.input.removeAttribute("forceFireFirstOnPropertyChange");
     var self = this;
     setTimeout(function() {self.putHint();}, 10);
To see if it helps

Error compiling [/jsps/explorer/enterwsdl_main.jsp] of alias [wsnavigator]

hello
I am getting the above error when I try to start the Web Services Navigator in my J2EE engine of Solution Manager 4.0 system.
I am on NW 7.0 Java Components SP10.
The full error message is:
500 Internal Server Error
com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException:
Error compiling [/jsps/explorer/enterwsdl_main.jsp] of alias [wsnavigator] of J2EE application
Can anyone help me out please? Or is it a case of just applying the latest SP?
Many Thanks
Steve

I have had a suggestion that I need to make sure that tools.jar is in the classpath for Tomcat. How can you get the value of variables Tomcat is using such as its CLASSPATH or JAVA_HOME ? Where are these set ? I assume that there must be a config file someplace...
Thanks in advance for any suggestions,
-James

Error in Internet Explorer when loading from cache

Hello all,
I have this error in internet explorer when it's loading the swf from cache
"ArgumentError: Error #2015: Invalid BitmapData.
at flash.display::BitmapData()"
If you have a solution for me I will appreciate.
Thanks

I've just run into this error as well. It only occurs when you have loaded your SWF into cache and you refresh the page. This error does not occur if the user opens a new tab and visits the site (even if the cache has that SWF). Right now, I am stumped on how to resolve this issue without the help of Adobe. There is a critical site launch that depends on BitmapData to work properly.
Adobe, I will also be posting this in your bug system.

Error in Internet Explorer with Muse

I have an error in Internet Explorer and cannot seem to find the resolve in your Q&A databases. It is: museJSAssert: Error calling selector function:Error: Invalid argument; I have gone thru this website for answers (looked at the code thru a code editor and any broken links as per mentioned in posted discussions)... This site is live right now, it works in Safari, Chrome and Firefox. NEED HELP ASAP PLEASE!
I have periods instead of dashes in the phone numbers... could this be it? OR some of the page links are not active yet... I am guessing at this point as I am relatively new to web/muse design. Any help would be fantastic! Thank you very much! Oh, the website address is www.rubarb.ca (yes, that is spelled correctly)... THANKS AGAIN!

I've just run into this error as well. It only occurs when you have loaded your SWF into cache and you refresh the page. This error does not occur if the user opens a new tab and visits the site (even if the cache has that SWF). Right now, I am stumped on how to resolve this issue without the help of Adobe. There is a critical site launch that depends on BitmapData to work properly.
Adobe, I will also be posting this in your bug system.

ERRORE CONNESSIONE BLUETOOTH

ERRORE CONNESSIONE BLUETOOTH
Ho acquistato l'app Phone Director for Nokia e durante la connessione bluetooth fra cellulare e Mac mi appare il seguente errore:
The computer cannot connect to the port: "NOKIAE5-DATA TRANSFER"
This port is occupied by other application or OS X.
Port error: 100 Access denied
Non riesco quindi a fare funzionare l'app che dovrebbe scaricare i dati del telefono sul Mac.
Aspetto vostre indicazioni su come poter risolvere il problema!!
Grazie!!!!

IPad 2 errore connessione H3G: clamoroso! Dopo l'aggiornamento a IOS 8.0.2 è praticamente impossibile la connessione. Nessun servizio o nessuna sim installata. È semplicemente pazzesco

IPad 2 errore connessione H3G: clamoroso! Dopo l'aggiornamento a IOS 8.0.2 è praticamente impossibile la connessione. Nessun servizio o nessuna sim installata. È semplicemente pazzesco!

IPad 2 errore connessione H3G: clamoroso! Dopo l'aggiornamento a IOS 8.0.2 è praticamente impossibile la connessione. Nessun servizio o nessuna sim installata. È semplicemente pazzesco!

I have a 3GS. Am trying to sync a plantronics explorer 232 Bluetooth headset and can't figure it out. I have Bluetooth turned on but it searches for devices and the headset never shows up. Anyone know exactly how to do this? My tech skills are lacking

I have a 3GS. Am trying to sync a plantronics explorer 232 Bluetooth headset and can't figure it out. I have Bluetooth turned on but it searches for devices and the headset never shows up. Anyone know exactly how to do this? My tech skills are lacking

I have the same blueparrott headset headset with the directions. Actually reading them just fixed my iphone pairing issue.
Here they are in case u still need them along with what I needed to do to get mine to work with iphone 4
Pair Headset with Phone
Turn off headset off
Hold down headset's MFB (large top button) until red & blue lights flash and you hear 2 rising tones, followed by 4 more tones. Must wait for all before you release the MFB button!! (I had my hubby hold the MFB while I waited for the tones since both come from the headset
Release the MFB and follow your phone's instructions to place it in 'bluetooth' discoverable mode. With the iphone4, go to "General" and then "Bluetooth" and turn indicator to "ON".
This is where my issue occurred as the phone could not find the bluetooth, although it worked with my LG phone. So after trying it several times thinking I was nuts and that the issue was with the iphone, I looked further in the blueparrot's directions and found this step that fixed the issue.
Reset Paired Devices List
On the bluetooth, press and hold down both the volume up & volume down buttons for 5-6 seconds. A double beep will be heard and the list will be reset. Pairing info for devices previously paired will be lost.
The bluetooth directions provide this as step 4 but that did not work for my phone (see below)
4. Once the phone discovers the headset, select "pair" and enter "0000" code and that when pairing is complete the blue light on the headset will stop flashing and phone will prompt you to 'connect'.
This is what I had to do after resetting the device list on my bluetooth
4. My iphone instanting discovered the headset and displayed it under 'Devices" but showed a message that it was 'not connected'. Once I selected the device on the iphone by pressing on it then it changed to "connected".
Even when I turn the bluetooth on and off the device remains on the list and alll I do is select it to connect and disconnect after I turn on my blueparrott bluetooth
I hope this helps others!

Error message in explorer of content management

Hello,
I have an error message when I click on "documents" in the explorer.
The message:
"Runtime Error
An exception occured while processing the request.
Additional information: com/sapportals/portal/prt/service/usermanagement/IUserManagementService
Exception ID = 203c12a3-5d03-2910-4b88-919ed557336d"
What is wrong?
I hope somebody can help me.
Kind regards
Susanne

Hi Susanne,
this is hard to say from this message only. I would guess that KM tries to resolve users in groups and this leads to some exception as there may be a problem with the UME backend (do you have an LDAP connected?) or some inconsistency within your UME (maybe there are groups set within the ACL which do not exist any longer or something like this).
For further details, please check the default.trc log where you should find addtional information on this error, maybe a stack trace.
Hope it helps
Detlev

Information space creation error in BOBJ Explorer

while creating the information space i am getting the following error
Failed to retrieve the data source details.
The creation of the data source object tree failed.
Cannot perform this operation: no valid license found
Looks like a license key issue, but while installing the BOBJ Explorer setup does not asked for any license key,
How to solve this error? How to get the license key and how can i update the license key information?
Thanks,
Kiran

Hi all,
The problem has been solved, I added all the license keys to the CMC server and then the problem got solved.
Thanks,
Kiran

SpyrData.js Unknown error in Internet Explorer

Hello my most learned friends!
I am having a problem in Internet Explorer with a page I'm
developing. I'm using SpryData.js to import some XML data for a
photo gallery. It works fine in Safari and Firefox 2 but displays
nothing but an unknown error message at line 1178 in SpryData.js
which is:
if (!hasSpryContent)
// Clear the region.
rgn.innerHTML = ""; <--- line 1178
Is there a way around this?
Thanks.
- Peter

I found
this
post on the forum relating to sprydata.js and it got me
thinking . . . maybe I've got a tag or an element that doesn't have
an innerHTML. So I hunted for this tag like I hunt for my inner
child and I found the problem.
<script type="text/javascript"
SPRYREGION:DETAILSREGION="DSDATA"> //emphasis mine
Somewhere in the production cycle me inner child must have
put that "spry:region" in by mistake. Sorry to raise a fuss. I
learned something from this - let the adults do the coding and
leave the inner children with the design.

Unexpected error for file explorer

I have a user that was trying to browse her document lib by using the explorer feature in sharepoint. At first we were unable to even get the explorer working.. but then I followed these steps:
1- patch IE
For windows 7 x32 machines this update needs to be installed:
http://www.microsoft.com/downloads/details.aspx?FamilyId=27df4b80-e71b-457a-9a5f-02668b1651c8
For windows 7 x64 machines this update needs to be installed:
http://www.microsoft.com/downloads/details.aspx?FamilyId=2aa7d8a3-d48d-4b7b-bfb6-770af0536fe1
2 - trusted sites
Under the trusted sites in IE these need to be added:
https://*.lync.com
https://*.microsoftonline.com
https://*.outlook.com
https://*.sharepoint.com
3 - made sure this was running.
In the windows services the WebClient must be running.
Once I did that everything was working correctly. The explorer now came up for the user with no issues. However, when the user tried to copy or move a file they received this error: "An unexpected error is keeping you from copying the file.
If you continue to receive this error, you can use the error code to search for help with this problem. Error 0x800700E0: Access Denied. Before opening files in this location, you must first add the web site to your trusted sites list, browse to
the web site, and select the option to login automatically."
The option to login automatically has already been selected for this user. I also checked the permissions to the site and she has full control selected. So i'm now at a dead end. Anyone have any suggestions? She is running office
2010 and I tested this on my office 2010 machine and it worked with no issues... However I am an Admin to the site. Cheers.

here this guy is talking about the permission on the computer.
This is often caused because you are not an Administrator, or do not have administrator priveleges. A well phrased problem is half of the cure, and in this case just make
sure tht your account has the 'top dog' administrator priveleges, and is using them.
http://www.computerperformance.co.uk/Logon/code/code_80070005.htm
Also please try your account on her computer and see if you able to copy the files or not?
Thanks -WS SharePoint administrator, MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog *Please remember to mark your question as answered & Vote helpful,if this solves/helps your problem.*

Sizing Error in Internet Explorer 7

I am currently developing a website that uses the xspf mp3
player (
http://musicplayer.sourceforge.net/).
I set the object size to width=100% and height=100% when I embed
the flash swf file. In Firefox the player is correctly sized to be
contained within the div it resides in but in internet explorer it
ignores my size tags and makes it the default size of the player.
http://exile.thepocketofresistance.com/
Is this a known issue? Do I need to detect IE and run a
workaround in Javascript or am I just being dumb and missing
something? Ignore the content :) Obviously it is a dev site for a
friend.

I've just run into this error as well. It only occurs when you have loaded your SWF into cache and you refresh the page. This error does not occur if the user opens a new tab and visits the site (even if the cache has that SWF). Right now, I am stumped on how to resolve this issue without the help of Adobe. There is a critical site launch that depends on BitmapData to work properly.
Adobe, I will also be posting this in your bug system.

Errore connessione plantronics explorer 395

Similar Messages

Maybe you are looking for