ErrorI::000 while importing IDOC in IDX2

Hi,
While importing the IDOC metadata in IDX2 i am getting the error::000.
How to rectify that.
I have checked the port config,rfc connections butcannot identify any error.
any solutions to rectify?

Hi Saras,
plz control the SM59 destination. The modus is bullshit, you cant trust. Copy the destination and put your own user and log on remote to be shure. Then use the new destination temporary for the port to check, if you get the same error.
Additional check user authorisation at R/3. The user must have SAP_XI_IS_SERV_USER and a role including S_RFC (Activity Execute, RFC object EDIN, object type Function Group)
Regards,
Udo

Similar Messages

  • Error occured while importing .der file in R/3 System

    Hi Friends..
    I tried to connect R/3 system with portal through SSO concept.
    for that I have downloaded (.der) file from portal.
    After that I tried to import that file through STRUSTSSO2 transaction in R/3 system, at that time I got
    error message like " Error occured while importing"
    so I can't able to import that (.der) file into R/3 System.
    Please guide me with exact steps.
    What should I do?
    Thanks
    Gowrishankar

    Hi Micheal and raghav thanks for your reply.
    Yes Micheal already we have installed .der file to other client in the same R/3 System
    may be that's why it shows an error?
    so what is the solution for this kind of scenarious?
    Thanks
    Gowrishankar

  • Doubt while importing idoc (file 2 idoc scenario)

    hi,
    In IR, Imported objects..>Idocs
    while importing idoc there are two options to import
    according to software componet version,
    Overwrite sever info temporarily
    which one i have to use ? what circumstances i have to each option?

    Praba,
    Also please check this SAP help for the difference between these two:
    http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/content.htm
    Regards,
    ---Satish

  • I am importing videos from my canon sl1 to my macbook when i use iphoto is says "iPhoto cannot import your photos because there was a problem downloading an image." and when i use image capture it says "An error occured while importing. The item 'MVI_1040

    I am importing videos from my canon sl1 to my macbook air when i use iphoto is says "iPhoto cannot import your photos because there was a problem downloading an image." and when i use image capture it says "An error occured while importing. The item ‘MVI_1040'' Thanks in advance

    Can you access the images on the phone with Image Capture (in the Applications Folder) ?

  • HT4858 why am I getting an error message while importing from iPhone photo stream to iMac ?

    I have not shared any photo for a few months.  I tried to import photos into my iMac from iPhone photostream and I get a message saying "an error occurred while importing photo, please try again later".  What am I doing wrong ?

    There's no need to import photos from your iPhone to your iMac. Photostream is synced automatically via iCloud on Wi-Fi.
    On your iPhone, tap Settings > iCloud
    Make sure Photo Stream is switched ON.
    On your iMac, open System Preferences > iCloud
    Make sure Photo Stream is selected.

  • Ipod photo - error occurred while importing

    I think I bumped out the camera connector and now I have the "error occurred while importing" stuck on the screen. Can't even turn off the ipod now as it appears to be totally locked up. Any suggestions?

    The response posted by username BillKia on Feb 27, 2013 may help (note that I am not referring to the post marked as the "Answer" although that is a workaround): http://answers.microsoft.com/en-us/windowslive/forum/gallery-program/access-deni ed-when-importing-photos-to-windows/ce58ee23-ed87-435f-b572-474cead8f09a

  • Regd  internal error while importing IDOCs and RFC's

    Hi All,
    Any idea, why i am getting internal error while importing RFX from  ECC system to Dev system of PI.
    It takes lots of time to import and many times it shows internal error.
    I am able to login and select the RFC ... but all of sudden after selection ..the window gets freezed and i have to End task the IR part.
    Is this a system error which only basis can fix?, have anyone faced similar issue.If yes please reply ..
    Regards
    Srini

    Hi Srinivas
    sevral times i faced this issue , ask your basis person , to increase the heap size  a little more at XI server ,
    and most of the time it happens due to Network down / connectivity .
    take the help of your network team and basis team .
    Regards
    Abhishek

  • Error while Importing Idoc with Extension

    Hi All,
      I already imported idoc with extension and working fine. When I tried to transport the Idoc from Dev XI to Prd XI . I got the following error
    The objects as displayed in the navigation tree are possibly not up-to-date.
    So I tried to Re import the Idoc in IR but it is ending with below error
      + com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: The objects as displayed in the navigation tree are possibly not up-to-date.
    I already saw some threads in SDN for this error but I am not getting solution.
    Can anyone provide a solution ASAP for the above error .
    Regards,
    Prakash

    > When I tried to transport the Idoc from Dev XI to Prd XI . I got the following error
    Why are you transporting it form Dev? Why not from QA to Prd.
    Since this is a Z-IDOC so check if the extension has been released from R3 after doing any modification.
    Regards,
    Sarvesh

  • Error while importing idocs in IR

    This is the error when I try to import Idocs in IR.
    "Unable to establish connection to R/3 system FR3 (client=850) Troubleshooting tips:
    Is the target system online?
    Check the connection data (note that server names and groups are case-sensitive)
    Tips for administrators (see the configuration guide for more details):
    Does the user have the required authorizations in the target system?
    Is the target system configured correctly in "etc/services"?"
    I have logged into the system and I have all the rights but still not able to figure out why I am unable to import Idocs /RFC

    Hi ,
    Check if the logsys name maintained in SLD is the same.
    You can view using the t-code scc4. Note that the entires are case sensitive.
    Also see if the tRFC port port cofiguration for importing metadata is correct ( Used tc IDX1 )
    Reward points if found useful
    Rgds,
    Sandeep

  • Error API0259 while Importing Processflow in to owb 11g

    Hi All,
    I am using owb 11.1.0.7.0. I am getting the following error while importing the process flow into owb (the mdl dump was taken from owb 10gR2)
    error: API0259: The object cannot be edited in Read-Only mode.
    Can any body please tell me the solution. Its urgent.
    Thanks in advance,
    Siva

    Hi Sutirtha,
    Thanks for u r reply, the problem was solved. What I was doing is , trying to import only one process flow which is using as sub process in other process flow.thats giving me the error.
    So, I have deleted all the process flows and imported whole process flow package in one go. That solved the problem.
    Regards,
    Siva

  • Error getting while importing support package in R/3

    Hi All,
    I am getting one error following error while importing support package in R/3.
    Open data extraction requests
    The system has found a number of open data extraction requests.These should be processed before starting the object import process, as changes to DDIC structures could prevent data extraction requests from being read after the import, thus causing them to terminate. Call the Customizing Cockpit data extraction transaction and process all open extraction requests.
    Can Anybody aware of this error.
    Thx & Regds,
    SGK

    Hi,
    I think I have to stop extraction process in LBWE or R/3. Can anybody tell me how to stop extraction process.
    Thx & Regds,
    SGK

  • Error occured while importing a map.

    I have got two design repositories and two runtime repositories in the same database. One is for OWB 9.2.0.4.0 and another for OWB 10.1.0.3.0.
    I was trying to export 1 mapping from a project in OWB10g to OWB9i where the said project does not exist. The export operation ran smoothly but the following error occured while the import operation:
    Error at line 25: MDL1261: Error importing DATAWAREHOUSE RTS/RTS.
    Detailed Error Message:
    MDL1162: System Type not specified before integrator.
    While importing the options i used were:
    Import option -----Add new metadata only
    Match by---------Universal identifier.
    Please help.

    just a guess: while exporting use "physical names" in naming

  • Error occured while importing the transport request to quality

    Hi,
    The driver program and form are in active status. We got the output also.
    When we checked the transport log for request(TR), it says that the form is not yet imported into EQ1. The system will update the transport log if there is any error related to driver program or form. Here we donu2019t find any error. As per the system response, u2018Import post-processing is not performed for this objectu2019.
    I am getting below error while importing the request.
    Import post-processing is not performed for this objectu2019.
    Could anyone please provide me the solution.
    Regards,
    Hemant.

    Hello,
    i think u r working on scripts ?
    if u r transportung the scripts i u need tcode SCC1.....
    Thank u ,
    santhsoh

  • Error occured while importing xsd.file(Name contains invalid characters: -

    Hello,
    i muss import xsd.file.  while importing this error occured:
    İFMEXTDEF CCTS_CCT_SchemaModule-2.0 | http://example.org/XXX/XXX/OUT/NOZ (SC_NOZ V001 of example.org):
    Name contains invalid characters: - .
    Only a(A)-z(Z), 0-9, and "_" are permitted
    This xsdfile name is CCTS_CCT_SchemaModule-2.0 but PI doesn't  accept "-". But i muss use this file because this file is standart. What can i do for this?
    Thanks
    Nurhan
    Edited by: Nurhan on Oct 18, 2011 11:22 AM

    HI,
      PI doestnt support special characters like '-'. first you need to change the file name as you specify '-'. to remove that and you have to give '_'. then uyou have to impot >XSD file into ESR under ExternalDefination.
    i hope this will help you.
    regards,
    ganesh.

  • ORACLE error 12705 while importing

    Hi,
    I exported two schemas which are using the same tablespace. While importing the second schema i got the following error while for the first one worked perfectly.
    IMP-00017: following statement failed with ORACLE error 12705:
    "ALTER SESSION SET PLSQL_COMPILER_FLAGS = 'INTERPRETED' NLS_LENGTH_SEMANTICS"
    " = 'BYTES' PLSQL_DEBUG = FALSE"
    IMP-00003: ORACLE error 12705 encountered
    ORA-12705: invalid or unknown NLS parameter value specified
    IMP-00000: Import terminated unsuccessfullythe NLS_LENGTH_SEMANTICS is set as 'bytes' for the database.
    I cannot figure out why this errot occured. Could anyone help what is causing this and how to correct it.
    Thanks in advace
    Muneer

    You are right ..it is 'BYTE', but even after correcting it I am getting the same error. As i said earlier it is not giving any errors for another schema!!
    Muneer

Maybe you are looking for