Errors 0x80070057 and 0x800703ed creating 'system repair' and 'system image' DVDs

  I have an HP620/WZ294UT#ABA using Win7 which I bought in May2011. At that time,
I successfully created the DVDs listed above.
  Last week, while using Adobe Flash Player 10 to listen to an audiocast,
after about an hour, I lost my internet connection. Other things were also
wrong, so I re-booted. However, after trying to signon, it just hung and clocked.
Waited over 10 minutes, but I never got my background image nor the taskbar.
Multiple re-boots failed the same way. Since I couldn't start any monitors,
I don't know what was wrong.
 I ended up using the above DVDs to successfully (apparently) recover my system
via f11. It seemed to work, however, on the final 'system image' DVD, I got an
error 'unreadable 0x80070570'. However, my system seems to be working OK.
  I re-installed all my own software that I installed since that backup.
  However, I wanted to make an updated set of DVDs so that,
1. if the 'unreadable' error was due to a faulty DVD
2. if my system failed again, I wouldn't have to re-install so much software.
However, both the above functions failed as stated above.
 For the 'create system repair' function, either thru your menus, thru
Control Panel, and even thru recdisc.exe, it fails. ProcMon shows this:
recdisc.exe 5680 5684 IRP_MJ_CREATE SUCCESS \Device\HarddiskVolume3 Desired Access: Read Data/List Directory, Read Attributes, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened 0.0000370 "C:\Windows\System32\recdisc.exe"  3400 358 10:20:01.6272718 PM
recdisc.exe 5680 5684 IRP_MJ_DEVICE_CONTROL FAST IO DISALLOWED \Device\HarddiskVolume3 Control: IOCTL_VOLUME_GET_VOLUME_DISK_EXTENTS 0.0000035 "C:\Windows\System32\recdisc.exe"  3400 359 10:20:01.6273383 PM
recdisc.exe 5680 5684 IRP_MJ_DEVICE_CONTROL SUCCESS \Device\HarddiskVolume3 Control: IOCTL_VOLUME_GET_VOLUME_DISK_EXTENTS 0.0000259 "C:\Windows\System32\recdisc.exe"  3400 360 10:20:01.6273525 PM
recdisc.exe 5680 5684 IRP_MJ_DEVICE_CONTROL FAST IO DISALLOWED \Device\HarddiskVolume3 Control: IOCTL_DISK_GET_PARTITION_INFO_EX 0.0000031 "C:\Windows\System32\recdisc.exe"  3400 361 10:20:01.6273958 PM
recdisc.exe 5680 5684 IRP_MJ_DEVICE_CONTROL SUCCESS \Device\HarddiskVolume3 Control: IOCTL_DISK_GET_PARTITION_INFO_EX 0.0000143 "C:\Windows\System32\recdisc.exe"  3400 362 10:20:01.6274070 PM
recdisc.exe 5680 5684 IRP_MJ_CREATE INVALID PARAMETER \Device\HarddiskVolume3\ Desired Access: Synchronize, Disposition: Open, Options: Directory, Synchronous IO Non-Alert, Open For Free Space Query, Attributes: n/a, ShareMode: None, AllocationSize: n/a 0.0000085 "C:\Windows\System32\recdisc.exe"  3400 363 10:20:01.6274663 PM
recdisc.exe 5680 5684 IRP_MJ_CLOSE SUCCESS \Device\Harddisk0\DR0  0.0000143 "C:\Windows\System32\recdisc.exe"  3400 443 10:20:01.6300329 PM
recdisc.exe 5680 5684 IRP_MJ_FILE_SYSTEM_CONTROL INVALID DEVICE REQUEST F: Control: FSCTL_GET_NTFS_VOLUME_DATA 0.0000388 "C:\Windows\System32\recdisc.exe"  3400 444 10:20:01.6300650 PM
recdisc.exe 5680 5684 IRP_MJ_CLEANUP SUCCESS F:  0.0000098 "C:\Windows\System32\recdisc.exe"  3400 445 10:20:01.6301288 PM
recdisc.exe 5680 5684 IRP_MJ_CLOSE SUCCESS F:  0.0000080 "C:\Windows\System32\recdisc.exe"  3400 446 10:20:01.6301498 PM
recdisc.exe 5680 5684 FASTIO_NETWORK_QUERY_OPEN FAST IO DISALLOWED F:\Recovery\WindowsRE  0.0000040 "C:\Windows\System32\recdisc.exe"  3400 447 10:20:01.6458293 PM
recdisc.exe 5680 5684 IRP_MJ_CREATE PATH NOT FOUND F:\Recovery\WindowsRE Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a 0.0000201 "C:\Windows\System32\recdisc.exe"  3400 448 10:20:01.6458735 PM
recdisc.exe 5680 5684 FASTIO_NETWORK_QUERY_OPEN FAST IO DISALLOWED C:\Recovery\WindowsRE  0.0000049 "C:\Windows\System32\recdisc.exe"  3400 449 10:20:01.6480058 PM
recdisc.exe 5680 5684 IRP_MJ_CREATE NAME NOT FOUND C:\Recovery\WindowsRE Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a 0.0000246 "C:\Windows\System32\recdisc.exe"  3400 450 10:20:01.6482481 PM
recdisc.exe 5680 5684 FASTIO_NETWORK_QUERY_OPEN PATH NOT FOUND \Device\HarddiskVolume1\Recovery\WindowsRE  0.0000151 "C:\Windows\System32\recdisc.exe"  3400 451 10:20:01.6483517 PM
recdisc.exe 5680 5684 FASTIO_NETWORK_QUERY_OPEN FAST IO DISALLOWED F:\Recovery\WindowsRE  0.0000036 "C:\Windows\System32\recdisc.exe"  3400 452 10:20:01.6517514 PM
recdisc.exe 5680 5684 IRP_MJ_CREATE PATH NOT FOUND F:\Recovery\WindowsRE Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a 0.0000178 "C:\Windows\System32\recdisc.exe"  3400 453 10:20:01.6517947 PM
recdisc.exe 5680 5684 FASTIO_NETWORK_QUERY_OPEN FAST IO DISALLOWED C:\Recovery\WindowsRE  0.0000044 "C:\Windows\System32\recdisc.exe"  3400 454 10:20:01.6537628 PM
recdisc.exe 5680 5684 IRP_MJ_CREATE NAME NOT FOUND C:\Recovery\WindowsRE Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a 0.0000250 "C:\Windows\System32\recdisc.exe"  3400 455 10:20:01.6540064 PM
recdisc.exe 5680 5684 FASTIO_NETWORK_QUERY_OPEN PATH NOT FOUND \Device\HarddiskVolume1\Recovery\WindowsRE  0.0000156 "C:\Windows\System32\recdisc.exe"  3400 456 10:20:01.6541042 PM
recdisc.exe 5680 5684 IRP_MJ_CREATE NAME NOT FOUND C:\Windows\System32\Recovery\Winre.wim Desired Access: Generic Read, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a 0.0000236 "C:\Windows\System32\recdisc.exe"  3400 457 10:20:01.6543260 PM
recdisc.exe 5680 5684 FASTIO_NETWORK_QUERY_OPEN FAST IO DISALLOWED C:\Windows\System32\netmsg.dll  0.0000045 "C:\Windows\System32\recdisc.exe"  3400 458 10:20:01.6546834 PM
  My f: drive does NOT have a Recovery DIR, and my c: drive does not have a
WindowsRE DIR in its Recovery DIR. Further, the \Windows\System32\Recovery DIR
only has 1 file, and not what ProcMon says what is being accessed.
  I found something VERY DISTURBING in your Web site, which SEEMS TO IMPLY that
these above functions can ONLY be run once:
"CAUTION: The HP Recovery Manager allows the creation of only one (1) set of
recovery discs,".
If so, that's VERY horrible; when my software is changed/updated, how am I
supposed to be able to recover my current system without a new 'system image'?
  Am I screwed here, and will I be forced to spend many hours recovering my system
to make it current? Patiently awaiting your answer...

FredS wrote:
Thank you. I have Acronis on my XP machines.
I will probably do the same here. I just think I made a mistake leaving 32 bit XP
I'll leave XP when they pry it from my cold dead hard drive.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Similar Messages

  • Getting error when trying to create Exchange Connector in System Center Service Manager 2012

    Getting error when trying to create Exchange Connector in System Center Service Manager 2012
    The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
    Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
    Warm Regards, Pramod Kumar Singh Manager-IT

    Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
    Also, your question is related to SCSM, please post at SCSM forum if you have further question.
    Juke Chou
    TechNet Community Support

  • I installed Lion online and i ran disk repair and found that i needed to do a repair  but i have no start up disk.  How do i repair without burning a disk?

    I installed Lion online and i ran disk repair and found that i needed to do a repair  but i have no start up disk.  How do i repair without burning a disk?

    Lion creates a Recovery partition on your harddrive. You will need to boot from startup.
    click here
    http://support.apple.com/kb/HT4718

  • If I want to fill out estimates and have created a fill and sign form;

    If I want to fill out estimates and have created a fill and sign form; do I have to access formscentral everytime or is there a way to save the fill and sign form that is readable on my tablet?

    The clouds you see next to your music on the device and iCloud are two different things. When your music is not on your device it is in iTunes in the Cloud. Not the same thing as iCloud which is used to sync information between devices and house backups of your device contents. So that little cloud you see next to your songs is telling you that the music is not on your device. That's why it is giving you the message - because when you click on it, it is attempting to download it to your device.
    What may have happened is when you imported your photos to the PC, you may have sync'd your device via iTunes, and you did not have the Sync Music option checked in your device Profile screen.
    Hook up your device to your PC and open iTunes. Make sure the sidebar is showing (Control+S if you cannot see the sidebar with Devices listed), and click on your device to open the Device Profile screens to the right. Click on the Music tab, and make sure that the Sync All Music or Sync Selected Music box is checked. If you have Sync Selected Music checked, then below that, make sure you check all music that you want on your device. Then click on SYNC at the bottom (or APPLY).
    Once you have successfully sync'd your music to your device, you will no longer see the cloud next to the songs, and you also will no longer get a message since you will have the songs physically on your device and not in iTunes in the Cloud.
    Cheers,
    GB

  • My I-pod screen is cracked and my account says 'Repairs and Service Coverage: Active' does that mean I can get it fixed for free or replaced?

    My I-pod screen is cracked and my account says 'Repairs and Service Coverage: Active' does that mean I can get it fixed for free or replaced? the ipod is very usefull to me as it keeps my three younger brothers entertained for a few minutes or hours and yes I understand that the Ipod is not indestructible but when in my pocket with two euro coins, it should not break when I sit down.

    That kind of damage is accidental and is not covered by warranty.  You can get the unit replaced for a flat fee:
    Replace broken screen on i-device - https://discussions.apple.com/thread/3869709 - lllaass post.  Similar one at https://discussions.apple.com/thread/3925666
    Apple - Support - iPod - Repair pricing - http://www.apple.com/support/ipod/service/prices/

  • Satellite L635-10P - Stuck with system repair and blue screen

    Help!
    I have a satellite L635-10p with Windows 7. Windows does not load, getting blue screen after the 4 colorful glow bug, windows icon. Safe mode also resulting in blue screen
    System repair is stuck in a black screen with movable cursor (white arrow).
    Do not have recovery disk. misplaced it. lost.
    please advise:
    1. how I may get the data, document files from the desktop?
    2. how to fix this?
    thanx

    Hi there,
    If you don't have Windows DVD then i advise you to download Ubuntu Live CD. You can run it without installing it, and you can backup you data from there.
    If you have DVD with Windows on it, insert it and wait for it to load. When it loads then hit "Other options" or something like that or maybe "Advanced" and there you will find "Command Prompt" hit it and in the console type "notepad.exe". Why you may ask, well you will get Notepad window and you can browse your hard drive and copy and paste data. If you can't see all files just be sure to select "All Files" in File types. That's the way I backup up my data.
    2. What is the error on the blue screen ? Have you tried to Google for it ?
    Regards Strahinja.

  • [SOLVED]Install kernel failed and how can I repair my system.

    In order to get suspend function, I try to compile a new kernel, I used the second method in http://wiki.archlinux.org/index.php/Ker … rom_Source with makepkg and pacman. I download 2.6.31 kernel and makepkg is OK, but pacman tell me /lib/***(lots of
    files name) can not be overwritten. I'm not very happy, what make matter worse, I reboot my
    system, it seems it lost some modules, it do not mount ext4 partition and can not find Ethernet.
    I have lots of data in this system, I could not erase the hard disk and  re-install the whole system. Is there a good way to repair my system?
    my system have 5 partitions: /,/boot,/usr, /home, /var, I hope these partition can be all reserved as possible.
    Thank you in advance.
    Last edited by netawater (2013-06-14 00:48:56)

    First off - you should _never_ use the default name when rolling your own kernel, _always_ give it a unique name! (this way, you can always go back to your previous, working kernel/modules) - by the way - have you tried booting the fallback kernel?
    One safe way of keeping your own data - boot from a live cd/usb stick without involving the current OS at all. Then use an external usb-drive (hey - these days you can buy a 1TB usb drive for less than 100 bucks - it's a no-brainer!) and copy all the data you are concerned about to the usb-drive.
    Once that is done you can start experimenting - or just plain and simple reinstall or try to reinstall the original kernel. If some of your partitions wont mount (private data), then remake to ext3 _after_ having backed it all up.
    I have not looked at the wiki, but I'm sure there is some warning about kernel naming - at least I _know_ that subject has been discussed in this forum.

  • Transporting role menu and workbook created diurectly in production system

    Hi gurus,
    We have several workbooks (and queries) that are created directly in production system. thoose workbooks are connected to a role that is created in development system and transported to production system.
    Now, we would like modify this role in development then tranport it on production system, but we are afraid that will be wiped out (overwrite) our production system workbooks (because the role not contains this workbook in development).
    Could you please explain to us what we have to do in order to not wiped out our production workbooks.
    Thank you in advance

    thank you, it's more clear for me...
    Exactly, to have all my requests and workbook in development, I tried to use "Transport order of copy (it means transport queries from Production system to development system)", then to connect them with the corresponding roles in development, but I have the think that BW considers them as new requests when I re-transport them again on the prod.)
    Could you say me if i can transport my production system queries on my development system, and manage them in this system (development) in the future.
    Thank you in advance

  • HT1533 i have no control of my new imac as windows 7 starts suggesting system repair and usb ports seem to be

    how do i regain control of my mac to unhang it from needing system repair (windows7)
    should osx on an sd card work (only option?)!
    any response would greatly encourage success.

    If you are having Windows issues then you need to be in touch with a Windows forum for assistance. You did not state how you run Windows (Boot Camp, Parallels, Fusion, etc....) so I'm afraid I can't provide any more help than that. If you happen to use Boot Camp, there is a Boot Camp forum available which is where the Boot Camp and Windows gurus tend to hang out.  The same would hold true if you use virtualization apps such as Fusion or Parallels.
    Good luck.

  • How to Transport Variance Forms and Reports(created in KKO4 and KKO1)

    Hello Experts,
    I searched for the following but could not find matching  answer.Will you, therefore, suggest on the following
    1. I created form in KKO4/5
    2. Then I created report under above form in transaction KKO1
    I did above in development and now need to transport it to quality and then to production after testing
    When I select menu Form -> Transport in KKO5, system prompts for customizing request.
    Which options(subobjects) should I select? should I select Key figures ( I used standard available key figures in form defination)
    After above customizing request for form, I selected menu Report -> Transport in KKO2 to transport the report. It prompted for subobject selection
    (a) Report defination (This is by default selected and greyed out),(b) Report form, (c) Key figures , (d) Transport all languages
    Which subobjects should be selected out of above.
    After above selection for reports, system is prompting for workbench request creation, during WB request creation system is also giving 'prompt for customizing request' creation and by default displaying customizing request created for Form. Should such customizing requiest be part of WB request?
    Secondly, I have created 8 forms and more than one report under of the these forms. Should the menu Form/Report -> Transport be selected for each form/report in same transport request? Is only that particular form/Report included in the Transport Request or does it include all existing/standard forms/reports also in transport request.
    Your earliest help is greatly appreciated. Thank you in advance

    Hi Jose
    Thank you very much for the reply
    Could you please elaborate on "if any configuration maintained at
    sub-objects level"
    What I am worrying about is my transport request should not overwrite anything in quality and production systems. It should take only forms and reports that I add/select in it.
    I am following the below steps Please correct me if I am going wrong
    1) Create new formS in KKO4
    2) Create one or more reportS in KKO1 under each of above forms
    3) In KKO5 (report painter: Change From screen), select the form that I created in step (1), select menu Edit->Transport form, I get the pop up to select the dependent objects for form. Here I select sub object - Form/Layout, Key Figures, Transport All Languages. On choosing Enter, I get pop up "Prompt for customizing request”. I create new request
    4) In KKO5 I select second form I created in step (1) and follow the activities mentioned in step (3) but select the same customizing request. This way I add all the form I created in one customizing request
    5) In KKO2, select the report that I created in step (2) select menu Report -> Transport I get pop up selection of Dependent objects for Report. Here I select sub object – Report Definition, Report Form, Key Figures, Transport All Languages. On choosing Enter, I get pop up "Prompt for workbench request. I create new request. When I choose enter on this pop up system automatically gives pop for "Prompt for customizing request” and by default displays cust. request created in step (3). Should I select Continue/Enter here?
    And Does it mean both customizing and WB request are clubbed?
    What is the sequence of transporting them?
    Thank you in advance
    Regards
    Anand

  • I tried to instal lion but my iMac says "install fail because hard drive is damaged and can't be repaired" and my only option is to restart and it immediately tries to download it again, won't let me back to any other screen.  Is there anything I can do?

    I am trying to install Lion and I keep getting a fail message that says "Mac OS X could not be installed because the disk Hard Drive is damaged and can't be repaired". It only gives me the option to restart to try again but fails every time, an no other option.   Is there anything I can do?

    I'll guess that you're upgrading from Snow Leopard? You should be able to start using your original install dvd by inserting the disc and restarting while holding the C key. Run Disk Utility from your install disc  and try to repair the drive. Then try the upgrade again.

  • I did disk utility, and verify disk and it asks to repair the disk using dvd installer...but when i insert the dvd- restart- hold c, it keep ejecting and can't read the dvd....i tried with my friends dvd too, but still fail...mac osx v10.6.7

    someone pls help me

    Well there is Resolve startup issues and perform disk maintenance with Disk Utility and fsck witch includes step by step instructions to run disk repair without the install disk.
    But before doing that, it's a good idea to backup. You may want to troubleshooting your superdrive / disk before hand. if I disk repair fails you may need the disk working to re-install the OS.
    Dose the computer read any DVDs? if no, you may want to use Troubleshooting the slot load optical disc drive.

  • JCO connection error:Couldn't create JCOClientConnection for logical System

    Hi All,
    We are facing a production outage issue.
      We have a Federated Portal Network setup where one of our producer goes down automatically (seems on heavy load).
      On this Producer server we have 3 Web Dynpro applications deployed and default trace is full with JCO connection error   saying Could   not create JCOClientConnection for logical System: CSVMR_WD_MODELDATA_DEST.
    We had issue with max allowed JCO connections so we changed the below mentioned parameters for JCO connection settings in portal:
    u2022     Minimum value of JCo Pool Size in total = 80
    u2022     Minimum value for CPIC_MAX_CONV per SAP Web AS = 320
    u2022     Maximum Number JCo Connections = 160
    Please let us know if we are missing on some settings, any help in this regard is appreciated.
    Regards,
    Priyanka

    Hi,
    As you have already increased the maximum number of connections/pool size but still you are facing this problem. I would suggest you to check the web dynpro application which might not be able to release/disconnect the JCO connection.
    Please check this [Thread|How to close a model object connection for Adaptive RFC?; for more details.
    Regards
    Puneet

  • What is the impact of destroying and re-creating from scratch the Open Directory Master?

    In order to try and solve some nasty issues hat I have since upgrading to OS X Server 3,0 I am considering completely destroying my OD Master and re-creating the users and groups from scratch. Before doing so (of course I will have multiple backups) I would like to understand:
    1.   When re-creating the users and groups is it sufficient to use the same ‘Unix’ groupid and userid numbers or do I also need to use the original GeneratedUIDs (is that even possible)? Are there any other aspects of the users/groups that I need to be sure to preserve?
    2.   Will there be any impact to services and their data from doing this? Specifically, I have users with data in Mail, Calendar, Contacts and the WiKi. Will they still be able to access their data after the OD destroy/re-create or is that data somehow tied to more than just the username (e.g. does it use the user/group UUID or indeed any other UUID from OD)?
    3.   Will there be any impact to OS X clients bound to the OD? Should I unbind them before destroying and re-bind them afterwards? Will there be any negative impact on the network users who log in via these systems (they all have ‘mobile’ accounts which do *not* sync to the server - all their data is local to the client)?
    Thanks in advance for any advice especially from anyone who has gone through this process.
    Chris

    Hi Rob,
    I have solevd my issue and I did not need to destroy / re-create the Open Directory. See my post here https://discussions.apple.com/thread/5785838 for all the gory details. The long and the short of it was that my problems all came from a point in the past when I changed the hostname of my server after I had created the Open Directory master. Seems like that is a very bad idea! Based on what I found it seems liek any small flaw in DNS forward and reverse name resolution can also cause similar issues. I don't knwo if either of thsoe may apply to your situation?
    As part of troubleshooting my issue I actually created a 'replica' of my server setup on another machine includingthe OD and associated users and groups. What I found was that many services (certainly mail, calendar and contacts) depend completely on the OD users and groups UUIDS. So if you wish to preserve user's data across an OD destroy and re-create it is vital that you carefully note for each group its Unix GID and its OD UUID and for each user their Unix uid, primary group id and UUID. When you are re-creating your OD master, as you create each group, use Directory editor to change its UUID to the original value. Similarly for Users. If you don't then users will no longer have access to any existign Mail, Contacts or Calendar data afterwards!
    HTH,
    Chris

  • Profiles created with SU02 and transporting them

    We have a lot of profiles that were created with SU02.
    When I change them in our Development system and then create a transport and move the transport to our quality system and our production system the changes do not get updated.
    I manually go to each system with SU02 and make the changes again and activate them.
    Is there another way or am I missing something.
    Thanks
    Joe

    Julius,
    The TCD field isn't causing confusion.  Look to the left at that Z:MC40 or whatever.  That's the auth object, which has a field called TCD.  In other words, there isn't S_TCODE with field TCD, there's this Z:MC40 or whatever, with field TCD and the tcode in that filed is MC40 or whatever.
    Anyway, if I go through my data for S_TCODE, then I find that in the profile, it refers to the following.  Note that these are the only two profiles in my UST10S table that refers to S_TCODE.  I need to figure out how to reconstruct the rest of the profiles into roles so that the unlimited access in these profiles below can be removed and the balance of the profiles can be given relevant transactions.
    X:TCODE        S_TCODE     &_SAP_ALL
    X:TCODE             S_TCODE     S_TCD_ALL
    X:TCODE             S_TCODE     S_TCD_ANW
    X:TCODE             S_TCODE     S_TCD_BC
    X:TCODE             S_TCODE     S_TCD_CUST
    X:TCODE:ALL     S_TCODE     &_SAP_ALL
    X:TCODE:ALL     S_TCODE     S_TCD_ALL
    X:TCODE:ALL     S_TCODE     S_TCD_ANW
    X:TCODE:ALL     S_TCODE     S_TCD_BC
    X:TCODE:ALL     S_TCODE     S_TCD_CUST
    Edited by: Santosh Krishnan on Jun 30, 2010 1:23 PM
    Edited by: Santosh Krishnan on Jun 30, 2010 1:24 PM

Maybe you are looking for