Errors 20, 22, and of course, 8.

On iChat, I keep getting errors 20 and 22. It's very frustarating. I have changed my bandwidth limit to NONE. I have changed my streaming speed to 1.5. I changed a port to 443. iChat will work fine some of the time, but then just freak out and stop connecting. I also get Error 8 every so often, but I can deal with that.

Hi,
Error 22 is about Bandwidth and Connection Speed.
If you have done all you have said AND restarted iChat then What is your connections speed ?
Is it consistent at different times of the day ?
http://www.ralphjohnsuk.dsl.pipex.com/page5.html#_speedtests
Some people are reporting that Comcast and possible Time Warner are throttling back the connection after you start.
It can be seen in downloads in a web browser as well as the speed drops off.
Error 20 normally refers to a "Can't get Video from Camera" message.
This tends to point to a busy processor.
Widgets, particularly internet ones like the Weather, Clock and Translation ones use both Processor and Bandwidth.
Open the Activity Monitor in Applications/Utilities and click the CPU Usage column to make this the focus.
Look for a stuck Print Monitor as well.
You are looking for several items that might be running 4-5% that add up to over about 20-25%
vcencoder is iChat video production. iChatAgent and iChat are also parts that should be running.
12:35 PM Monday; August 13, 2007

Similar Messages

Error while Booking and Prebooking course

Dear Experts,
I have tried to prebook a course from the Portal. Upon clicking the prebook link, the system throws the error,
"Error when creating the prebooking with the data entered. Check and, if necessary, change your entries and try again. "
Also when I try to book the course, the system gives the following error,
"Transport connection is active; no changes possible"
Am I missing any configurations. Please guide me on this issue.
Thanks and regards
Saravanan K

Hi Saravanan,
Regarding the first error on prebooking, there always are the start date and end date for each location displayed on the list of entries found. That's why the administrator can choose from this list the right object, which is valid within the period he has already entered on the 'prebook participation' popup or is going to enter. It also depends which from selection's criteria will be entered as first on the popup: location first and the period might be changed afterwards or the period and then the location.
Anyway the system delivers the above error when the invalid location has been selected and the further processing will be stopped.
Regarding the second error, check the SAP Notes 33582, 819656, 163897 and 746917.
In many cases, the transport connection in the back-end system is active. You can then proceed as follows: In the table T000, change the transport settings for the corresponding client. If this is not possible, you can use the TRSP/CORR switch in the T77S0 table to deactivate the transport connection for HR-PD objects.
I hope the above helps.
Li

When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed" and of course there is no device that shows up either. It would be great to download my photos! I'm using Windows

When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed" and of course there is no device that shows up either. It would be great to download my photos! I'm using Windows

Go through this support doc:
OS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538

Fatal Error has occured and the application is being terminated

It seems that Captivate is eating my projects. I've started my second project (after completing my first without any errors) and I'm constintly getting corrupted files. It set me back at least a few hours worth of work. So I started creating backup files every 10mins, regardless of how much work i've done. Everything was going fine, until I took an hour break and went to resume my work.
When I try to open my file I get the following pop up message when trying to open my file: "Adobe Captivate - A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folder as .cpbackup files. Please restart Adobe Captivate."
I can click on the program workspace and not click ok on the error message to keep the file open. I see my slides and objects, but all the text is missing.
I'm using Captivate 5.5 and windows 7 64. Within Captivate, I'm using standard objects with importing MP3 audio files and some Photoshop images. I have a total of 4 slides with 1 being 3.5mins long and the rest are less than 1min.
When I first started having this problem, I thought maybe the variable files were corrupte so I deleted the Users/name/appdata/local/adobe/Captivate5.5 directory to see if that was the issue. That was before this last stint of errors.
I tried opening a backup that was like 10 saves ago, but it displays the same message.
I'm not sure what to do next.

Failed to back up the data. A fatal error has occured and the application is being terminated.
This question is Not Answered.(Mark as assumed answered)
hi,
I am working on a content development using captivate 5.5. all of sudden I am not able slide view I am not able to view the text captions in slide view but i am able to see the text caption in Filmstrip. and when I am selecting another side it throwing below error and application ends.
Adobe Captivate
A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.
Please restart Adobe Captivate.
OK
I have a deliverable by this weekend if some can help to resolve this issue will be appreciated.
Note: when first time it crashed, I re-created the course again from scratch and its crashed again. I have multiple attempt to finish this course but no luck.
Please help me out to deliver my work.
Thanks
CD

Failed to back up the data. A fatal error has occured and the application is being terminated.

hi,
I am working on a content development using captivate 5.5. all of sudden I am not able slide view I am not able to view the text captions in slide view but i am able to see the text caption in Filmstrip. and when I am selecting another side it throwing below error and application ends.
Adobe Captivate
A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.
Please restart Adobe Captivate.
OK
I have a deliverable by this weekend if some can help to resolve this issue will be appreciated.
Note: when first time it crashed, I re-created the course again from scratch and its crashed again. I have multiple attempt to finish this course but no luck.
Please help me out to deliver my work.
Thanks
CD

We have the exact same problem.Renaming the backup file per this post http://forums.adobe.com/message/4055726 didn't work. I can open the file and see the text boxes even though they're now showing as empty. Is there any way to recover the file?
Yes, we were using a network drive but now we've switched to locally stored content.

I cant get into itunes producer keep getting an error my username and password is incorrect. i have made a new one all good still same error any ideas?

I cant get into itunes producer keep getting an error my username and password is incorrect. i have made a new one all good still same error any ideas?

I'm having a very similar problem.
I'm based in the U.K. and am trying to publish an iBook through the iTunes bookstore. I have made my book in iBooks author 2.0. My iTunes is up to date.
When I try and publish the iBook I have passed and ticked the Pre Publish Check; and the Create Account, but when I try and download iTunes Producer through iTunes Connect I'm told "Your Apple ID does not have permission to access iTunes Content."
When I try and re-set my iTunes Store account I'm told "The iTunes Store Account has already applied to distribute content on the iBookstore." Of course it has I just did that.
If I try and sign in to iTunes Connect through the Publishing pane I'm told "Your ID or Password was entered incorrectly." Even though I've just used it to sign into iTunes (and here), so my password and Apple ID work fine elsewhere.
Is my access to the iTunes Connect being delayed while my submission is processed, i.e. the processing of my tax and account details? Or am I stuck in a loop?
If this is still processing (I started this 20 hours ago) I assume that I have to submit the book itself when I can download iTunes Producer at a later date, as I haven't submitted the book yet?
I emailed the problem to iTunes Store and was refered to [email protected], only for them to say they don't read or reply to emails sent to that address??????
I'm not sure which part of the process I've reached - if any. I feel I'm in limbo. I have an iBook ready to go - but where is Apple?
Any help would be most welcome.
Andy

I am trying to upgrade my iPhone 4 to the latest iOS via iTunes, but I keep getting a message saying that an error [-5000] occurred and continuing will delete all content on my iPhone. What's the solution?

I am trying to upgrade my iPhone 4 to the latest iOS via iTunes, but I keep getting a message saying that an error [-5000] occurred and continuing will delete all content on my iPhone. What's the solution?

okay I've done everything regarding the transfer process (via file>transfer purchases) and syncing, so everything on my iPhone device seems to have been transferred to my iMac... however, I still get that message ("There are purchased items on the iPhone..."), trying to upgrade the iOS Have tried several times the same process of hitting transfer purchases via file, but nothing seems to make that message go away! Would have been nice to know which files I actually do need to transfer, which I don't get any info on of course...
Starting to get really annoying this thing.. Any smart suggestions what's going on?

Error: 0271: Real Time Clock Error - Check Date and Time settings.

Hello all,
I have lenovo T430s laptop that is configured with Bitlocker encruptions and TPM PIN entry. I don't think that has anything to do with the error msg I am getting but here it is. Error: 0271: Real Time Clock Error - Check Date and Time settings.
Press Esc to continue or F1 to enter setup. I am unable to get into BIOS or even the login screen for Windows 7.
Any advice would be appreciated.

Thanks to everyone for the help. Just want to close this out. I had a IBM/Lenovo technician here today and he replaced the CMOS battery. Upon the change, the computer is fine being reconnected to the dock (the three times I tried it). So it has been resolved with the battery. Surprised by the incompatibility claim because I am not having issues now. Wondering if it's just a USB 2.0 vs. 3.0 thing (and Lenovo trying to sell more peripherals, of course).
Thanks!

Error when I want Create course in the portal LSO

Dear.
Anyone Know What is the cause of the following error when I want create courses in the portal LSO in the moment of press the button Save
! Course could not be created
! Web-Based Training could not be created.
! External relationship could not be edited (->T77EV)
The Path for reproduce the issue is:
Course Administration>Courses>
Schedule a Course Date
Search in course Catalog--> I select a Course Catalog
Press the button start-->
Ok.
Save
Thanks
Juan.

Please check T77EV and compare it from client 000 system.
Are the entries same as in client 000 ?
Seems that there is an incorrect entry in this table.
Please check this way.
Hope this helps.
Best Regards

TS1567 WHen I try to connect my iphone 4 to iTunes, I keep getting an error code 0x800000A and it won't recongize my iphone. Any suggestions? I have deleted everything and reloaded itunes, but the error code contines to pop up.

Any suggestions to fix an error code 0x800000A, and itunes not recongizing my iphone 4? I deleted iTunes and reloaded it with no changes. What can I do?

In the course of your troubleshooting to date, have you worked through the following document?
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting to a Windows PC

Help - I'm getting errors ORA-06502:and ORA-01002: at runtime

Help
I am getting the following errors at runtime and need some isdeas on what to check:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "OWB_RUNTIME.WB_RT_MAPAUDIT", line 1736
ORA-06512: at "OWB_RUNTIME.WB_RT_MAPAUDIT", line 2625
ORA-06512: at "OWB_TARGET.MAP_BSL_PLACEMENT_FACT2B", line 1148
ORA-01002: fetch out of sequence
ORA-02063: preceding line from BASIL@LOC_TARGET_NEW_LOC_BASIL_SOURC
ORA-06512: at "OWB_TARGET.MAP_BSL_PLACEMENT_FACT2B", line 1457
ORA-06512: at "OWB_TARGET.MAP_BSL_PLACEMENT_FACT2B", line 3458
ORA-06512: at line 1
My Mapping is a fact recording enrolments in courses (located in my main target database - oracle 9i)
joining with an equi-join to a table that contains an audit of all changes to the enrolment (in my source database - Sybase 12.5)
then updating two fields in a tabke that is a second definition of the first fact
The equi join uses the key to the enrolment table, plus a transaction type to identify only the creation of the record
Between the join and the update of the table one field is going thru a trim (converting char to varchar2) then an expression that sets the value to "not_supplied" for cases where the value was null.
The other field is a date (from sybase datetime to oracle Date)
(they are the user that created the enrolment and the date the enrolment was actioned)
I created this mapping by copying another mapping that does pretty much the same thing, deleting the join and table it was joining to and adding the audit table and new join.
Both mapping deploy fine with no warnings, the original executes fine the variation gives the errors above.
I have tried removing one then the other of the columns I am updating. (the same errors occur)
I am about to re-write the mapping from scratch, but can anyone guess what is wrong with it ? (I'm using OWB 9.2.0.2.8)

Thanks for the suggestion
There are no "char(32767)"s in the package - altho there are "varchar2(32767)"s
I have tried a variotion on the script, outputting the result to a new table instead of updating the enrolment - which ran fine so the error is in the update.
I tried adding a step using the result in the temp table to update the enrolment table - and got my errors again. So there is something funny in my data. Nothing obvious shows.
The full temp table contains 745292 records - when it failed 150 records had been written.
I note that although I had expected only to find one record per enrolment, there are some where there are two (@#$%!! source system writing two "insert" audit records) - could my problem be that I am updating a record previously updated - where do I set the script to commit as it goes?
Sandra

2TB Ext. Hard Drive is corrupted?, error code -50 and then error code -35 when i try to empty out my trash

okay so a few days ago i received and email for one of my colleagues to do some final editing to a music video. the folder contained 2 videos a rough chops and the main which was about 2-3GB which i dragged on to my external hard drive . and at the time i was trying to install a trial version of parallel lines and me being a newbie to the software i didn't know i need windows installments for it to run lol but yeah... so i was just getting frustrated with the software i kept installing it uninstalling it and then i was thinking my the problem might be because my MacHD space is low (less then 40GBs on my MacHD), so.. i installed it on my hard drive where all my important files are (I'm a graphic designer and do light video editing) video projects and many photoshop projects form 2007 and logs and just a bunch of important files in my hard drive. so because i was so frustrated with the software i wasn't thinking and i installed it on my external 2TB hard drive. and when i realized parallel wasn't working i gave up, uninstalled the program form the hard drive and for some reason when i did that and i tried opening the video my friend had email to me and for some reason it did load up but a few seconds maybe about 10sec in the video is froze and closed my media app (VLC) and when i tried opening other video files it would freeze every few minutes but those specific files i had drag in last were not playing after at least 5 secs and eventually didn't open at all so i restart my computer login and now i get scared i see that my MacBook Pro isn't reading my external hard drive so i search threw forums... i unplug from the wall plug my external hard drive back in my computer and it loaded up but when i opened my external hard drive all my files had that plank white paper icon on my folders (because i have everything organized but subject when you open then drive folder. so... i go in to my projects and nothing, i open my edited photos and nothing... my hart feels like its about to drop and i keep opening files and there is nothing in them, but in "get info" of my drive it shows that there is filled so i go to "disk utility"... i "verify disk" passes ..."repair disk" doesn't past.... i look it up in forums... so i reboot my computer and go to the safe recovery menu. go threw the same ting "disk utility"... verify, pass... repair, pass... so now i feel relieved. i login files in the ext. hard drive load up i tried again to open the files and same thing happens... so now I'm thinking its the files i drag the files to the trash and try to empty and its gone i reboot the computer and my drive didn't load up so i tried unplugin it and back in... drive comes up i notice theres trash.. i tried emptying it and i get the error code -50. and no files are popping up on my external drive and i try to repair/unmount disk and the verify disk doesn't pass and when i click repair disk it doesn't past and another error code pops up -35.... so i felt my drive alone for a few days and yesterday i go the files deleted from the trash and now I'm not getting any codes but when i try to unmount.verify/repair the disk. keeps letting my tits need to be repaired so i click the repair button another error unable to unmount volume to repair...
what do i do? my files still don't show up. and I'm very sorry for the long paragraph but i have to be detailed for you to understand my situation

Read this.

Test-OutlookConnectivity WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.

Hi All,
When we do a test-outlookconnectivity -protocol:http the result is a success but then we get the following:
ClientAccessServer   ServiceEndpoint                               Scenario
Result Latency
(MS)
xxxxxxxxxxxx... xxxxxxxxxxxxxx                 Autodiscover: Web service request. Success   46.80
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance
of an object.
Object reference not set to an instance of an object.
    + CategoryInfo          : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
    + FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
So it looks like it's not completing successfully.
I can't find anything on this in particular, and don't really know how to go about solving it - We are fully up to date, Exchange 2010 Sp2 with Rollup 5-v2
Any help appreciated!

hi,
I have the same issue also on Exchange 2010 SP2 RU5v2
I ran your command and get the below
[PS] C:\Installs\report\Activesync>Test-OutlookConnectivity -Protocol:http |FL
RunspaceId                  : ebd2c626-1634-40ad-a17e-c9a713d1a62b
ServiceEndpoint             : autodiscover.domain.com
Id                          : Autodiscover
ClientAccessServer          : CAS01.domain.com
Scenario                    : Autodiscover: Web service request.
ScenarioDescription         :
PerformanceCounterName      :
Result                      : Success
Error                       :
UserName                    : Gazpromuk.intra\extest_645e41faa55f4
StartTime                   : 8/21/2013 4:08:50 PM
Latency                     : 00:00:00.1250048
EventType                   : Success
LatencyInMillisecondsString : 125.00
Identity                    :
IsValid                     : True
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.
Object reference not set to an instance of an object.
    + CategoryInfo          : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
    + FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
Any help would be greatly appreciated, I also get random failures of OWA, EAS and web services, very frustrating
I have no errors in the app event log
thanks
Faisal Saleem Windows Systems Analyst 07595781867

Error while uninstalling and then re installing sharepoint 2013 on same server(windows server 2012)

Hi All,
I have installed SharePoint 2013 prerequisites successfully on windows server 2012. While installing SharePoint 2013, system struck on for several minutes. I have restart my system manually. Later I then installed prerequisites which showed a successful
lessage. But When I try to install SharePoint 2013. I am getting the following error:
trial editions and lincensed editions of SharePoint, Project Server, and Office Web apps products may not be installed on the same server.
I am unable to find solution for this issue. what is the solution for this?
Thanks in Advance..
Prem Kumar

To be honest, the quickest thing you could do (and what I would do regardless) is re-build the server (re-install Windows).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

I get error 0x80073cf9 now and I need help to FIX Windows Store can't update any Apps & can't install any Apps now?

Hi I hope some one can tell me step by step how to fix windows 8.1, I can't update any of my Apps and can't install any new apps now and I get error code 0x80073cf9? But my problem is different than most of the other FIXES I read about, because nothing
fixes my problem to be able to install new Apps and get app updates and stop getting that error code?
I keep getting same error code 0x80073cf9 after I try any of the FIXES I have read about and tried all the fixes on my Lenovo Z580 laptop, that came with windows 8 and updated to 8.1. And ever since I bought this laptop I could
always install and update all my apps for the last year when I had Win 8 and Win 8.1 now.   This has been going on since April and May and its driving me crazy!    And from the May updates I did get all the updates and
I also installed the KB update that said I need this KB to get all updates in the future.
But all the other people when they get this error code they could not even open and use any of their Apps already installed. And they also get the error code when they try to update or get a new apps.
But I can click on any APP installed already and use all my Apps with no problems.   I have read so many how to fix this error code but nothing works! :-(     I have tried a lot of
the fixes on Microsoft forums that says do this and the fix will get rid of the error code but I keep getting the same error code after I try that fixes.   And I have read a lot of other windows 8 an windows 8.1 web sites when
I search for how to fix this error code?   And tried all of the fixes that were different from the Microsoft forum fixes. But after I try those fixes I still can't install any apps or can't get my app updates?
Please to any person's who can help me by giving me more that 1 fix, because I have tried so many fixes, If you know more that 1 fix tell me how to do your fix step by step so I can understand what you say to do to fix my windows store?
Thanks for any and all help? And if I don't get any help in this section of the forum I will try to put this in a different area, if I don't get any help at this section of the forum I will try to ask this in another part of he forum ok?
I really need HELP with this so I can get my laptop working again to install new apps and get the updates to my apps?

Fixed the problem by going to settings/store and logging out with apple ID. Then logged back in with password and updates, apps, and iTunes store seem to work ok now.

Errors 20, 22, and of course, 8.

Similar Messages

Maybe you are looking for