Errors 2050 and 2051 repeated in CSV cluster

Good afternoon,
OS on ISCSI Target: Microsoft Windows
Server 2012 Standard
OS Nodes: Microsoft Hyper-V Server 2012
Problem: These errors appear repeatedly.
Nombre de registro:   Microsoft-Windows-FailoverClustering/Diagnostic
Origen:               Microsoft-Windows-FailoverClustering
Fecha:                05-02-2014 11:21:58 p.m.
Id. del evento:       2050
Nivel:                Advertencia
Usuario:              SYSTEM
Descripción:
[ClRtl] SsCoreShareAdd(): status = 2118 share = CSV$ server = (null)
Nombre de registro:   Microsoft-Windows-FailoverClustering/Diagnostic
Origen:               Microsoft-Windows-FailoverClustering
Fecha:                05-02-2014 11:21:58 p.m.
Id. del evento:       2051
Categoría de la tarea:   Ninguno
Nivel:                Error
Usuario:              SYSTEM
Descripción:
mscs::LocalIdentity::Refresh: ERROR_FILE_NOT_FOUND(2)' because of 'Failed to read value 'LastUpdatedOn''
Any Idea?
Thanks for your help.

Hi,
Cluster Diagnostic log always exists there and some of these logs could be ignored.
Whether the cluster is working properly? If not we may need more information in order to troubleshoot the issue. Is there any error occurs in cluster log and system event as mentioned in following thread?
Constant Log error id 2050 and 2051 - after added FC Storage and made it HA with CVS
http://social.technet.microsoft.com/Forums/windowsserver/en-US/659a6c47-46f6-49ab-902a-d546fb8bc7a7/constant-log-error-id-2050-and-2051-after-added-fc-storage-and-made-it-ha-with-cvs
If you have any feedback on our support, please send to [email protected]

Similar Messages

I set up a passcode to ensure the security of my iPhone 5 but, when I enter it on the home screen, I repeatedly receive an error message and my phone locks. Is there a way to reset the passcode when I am unable to gain access to my phone?

I set up a passcode to ensure the security of my iPhone 5 but, when I enter it on the home screen, I repeatedly receive an error message and my phone locks. Is there a way to reset the passcode when I am unable to gain access to my phone?

I figured that was the case, but I've used the same passcode for years and I can't seem to figure out how I managed to screw it up when I set up my phone. Without being able to access my phone for a restore, how would I accomplish this? iTunes? Thank you very much for you help!

TS1292 I bought a 4 pack of $25 Itunes gift cards and only 2 will activate. For the second two it just keeps asking for my login. No error message just keeps repeating the login

I bought a 4 pack of $25 Itunes gift cards and only 2 will activate. For the second two it just keeps asking for my login. No error message just keeps repeating the login. Is there any way to fix this or did I just lose $50

Report this here:
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

I am unable to install Lion. I have a Core 2 Duo iMac with 4GB of Ram and 120GB of free space - and no Bootcamp or other partitions - and yet repeatedly get the 'no recovery' error. Can anyone help?

I am unable to install Lion. I have a Core 2 Duo iMac with 4GB of Ram and 120GB of free space - and no Bootcamp or other partitions - and yet repeatedly get the 'no recovery' error. Can anyone help?

Run Disk Utility located in /Applications/Utilities before trying to upgrade to Lion in case the startup disk needs repairing.
Using Disk Utility to verify or repair disks

I want to update my ipad2 when i used to download the os it shows error as network timed out and i repeated again and again always it shows that network timed out but the apps are downloading but large apps are't why?

i want to update my ipad2 when i used to download the os it shows error as network timed out and i repeated again and again always it shows that network timed out but the apps are downloading but large apps are't why?

Try temporarily turning off all your firewall and antivirus software until the download has completed.

I run windows 7/8 and lightroom 5.7 i am getting an error message and here it is " lightroom encountered and error when reading from its preview cache and needs to quit". I am getting this message repeatly. What do I need to do to fix it.

I run windows 7/8 and lightroom 5.7 I am getting an error message and here it is " lightroom encountered an error when reading from its preview cache and needs t quit" How do I fix this.

THANKS
Hank Wilkinson
Please visit my web site <http://www.hankwilkinson.com/> www.hankwilkinson.com for the latest of my photos
For information on any of these photos please email me or call 612-756-9970

Regarding runtime error DBIF_RSQL_SQL_ERROR and exception CX_SY_OPEN_SQL_DB

Hi All,
I am loading a COPA cube from a DSO.
There are about 15million records to be loaded. every time i try loading the data, 1 or 2 Data packages gets stuck and finally it leads to a runtime error DBIF_RSQL_SQL_ERROR with exception CX_SY_OPEN_SQL_DB.
When i checked in SM21 transaction code, i got the following message
10:41:52 BTC 018 500 AMRUKV                     BY O Deadlock occurred
10:41:53 BTC 018 500 AMRUKV                     BY 4 Database error 60 at INS access to table /BIC/FCSDV
10:41:53 BTC 018 500 AMRUKV                     BY 0 > ORA-00060: deadlock detected while waiting for resource
10:41:54 BTC 018 500 AMRUKV                     AB 0 Run-time error "DBIF_RSQL_SQL_ERROR" occurred
10:41:58 BTC 018 500 AMRUKV                     AB 1 > Short dump "080818 104154 s0173bel PB100 " generated
10:41:58 BTC 018 500 AMRUKV                     D0 1 Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20080818104154s0173bel_PB1_00 AMRUKV 500 )
In transaction code ST22 i got the following message:
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Date and Time          18.08.2008 10:41:54
Short text
     SQL error in the database when accessing a table.
What happened?
     The database system detected a deadlock and avoided it by rolling back
     your transaction.
What can you do?
     If possible (and necessary), repeat the last database transaction in the
      hope that locking the object will not result in another deadlock.
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
      in procedure "WRITE_ICFACT" "(FORM)", nor was it propagated by a RAISING clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     The database system recognized that your last operation on the database
     would have led to a deadlock.
     Therefore, your transaction was rolled back
     to avoid this.
     ORACLE always terminates any transaction that would result in deadlock.
     The other transactions involved in this potential deadlock
     are not affected by the termination.
How to correct the error
    Database error text........: "ORA-00060: deadlock detected while waiting for
     resource"
    Internal call code.........: "[RSQL/INSR//BIC/FCSDVD_C02 ]"
    Please check the entries in the system log (Transaction SM21).
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
    "GPD3UMZD6V4YAKZAIWAOCYLV07Y" or "GPD3UMZD6V4YAKZAIWAOCYLV07Y"
    "WRITE_ICFACT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    The exception must either be prevented, caught within proedure
    "WRITE_ICFACT" "(FORM)", or its possible occurrence must be declared in the
    RAISING clause of the procedure.
    To prevent the exception, note the following:
Can anybody suggest on what can be done?
Thanks in Advance,
Regards
A.T

Hi ,
This is a table space issue....
u will be getting a Dump...as DBIF_RSQL_SQL_ERROR check in ST22. in this DUMP if u scroll down u will find the table for which this is failing. Actually this is like some of the table related to the DSO is not having sufficient space to cary out the transaction. hence it is failing.
U can also see in DB02--> Deadlock....u will see that there is a deadlock for this table. So find the table from ST22 and ask ur basis team to increase the space for this table....
This can be solved only by increasing the space of the table...no other solution....ask help from ur basis team.
Thanks
Sandeep

DNS Server Errors 4015 and 4010

Hi all,
we have upgraded a 2003 Domain to 2012 R2. All DCs now are 2012 R2. The Domain and Forest Level are 2008. Be checking the Eventlogs of the DNS Server we found that we have DNS Error 4010 and 4015 Events repeatedly.
4015:
The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
4010:
The DNS server was unable to create a resource record for f55ab78a-df8d-4c2c-8420-52dc8b5604e2._msdcs.domain.local. in zone Domain.local. The Active Directory definition of this resource record is corrupt or contains an invalid DNS name. The event data contains
the error.
We found that the Errors are available on oll DCs. The errors occurs only after the DNS Server Service are restartet on the DCs.
We check the dcdiag /e /test:dns with all PASS
We check the netlogon Service are successfully update be a restart the _.msdcs records in the Zone if the record are not present
We check the _msdcs.Domain.local Zone, it is in the forest Root Partition and AD integrated. We move it to the root of the DNS like the KB817470 describe
We check the dns by the Best Practices Analyzer, wihtout a error
We check the AD replication by repadmin without error
Thanks for help
Regards Steven

Hi,
Can you tell more information about the migration?
The roles that installed on windows server 2003 before migration. Is DNS role installed on it?
You can refer to this similar thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/55c7a4cd-2932-4b0e-bfd2-b043490df000/eventid-4010-dns-the-active-directory-definition-of-this-resource-record-is-corrupt-or-contains-an?forum=winserverDS

Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5015. SQL 2012 SP1

Hi,
Please help. I was trying to remove a SQL 2012 SP1 two node clustered instance using setup (Mantenance -> Remove Node)
I started by doing this on passive node (and was successful) but when I ran setup on active node just before finishing successfully I got this error:
TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
The following error has occurred:
The resource 'BCK_SG1DB' could not be moved from cluster group 'SQL Server (SG1DB)' to cluster group 'Available Storage'.
Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5015.
Description: The operation failed because either the specified cluster node is not the owner of the resource, or the node
is not a possible owner of the resource.
For help, click:
http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE8049925%25400x42B4DED7
BUTTONS:
OK
I noticed that SG1DB instance was removed on both nodes but on Failover Cluster Manager -> Services and Applications the SQL server instance for SG1DB is still there. So I tried to delete it but got the error:
Failed to delete SQL Server SG1DB. An error was encountered while deleting the cluster service or
application SQL Server SG1DB. Could not move the resource to available storage. An error occured
while moving the resource BCK_SG1DB to the clustered service or application Available Storage
Any ideas why it failed or how could I delete the SQL server instance from Clauster?
Thx

Hello,
Please read the following resource.
https://support.microsoft.com/en-us/kb/kbview/313882?wa=wsignin1.0
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

HT201210 I have an unknown error (1621) and my iPod is not being recognised in iTunes or the Finder, even in Disc mode. Anyone know what's going on?

I have an unknown error (1621) and my iPod is not being recognised in iTunes or the Finder, even in Disc mode. Anyone know what's going on?

Try and force iPod into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPod
Note: You need to be patient and repeat the above many times to recover your iPad

Just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
I hope this helps you my friend!

New Internal Hard Drive and Clean Install: Errors, Frustration and Hopelessness

First Off:
Macbook 13" (late 2009) ... It was running Mountain Lion 10.8.5 with 2 gigs of memory and 160gig stock hard drive.
I started this process almost a week ago and despite numerous attempts every night I have had no luck. I appologize if the details here are fuzzy, my head is spinning after reading dozens of threads and attempting multiple solutions to each error I've received and i cant remember everything I've tried so far...
I got my new memory in the mail first, upgraded to 4 gigs and everything works fine with that..
Next came my new Seagate Momentus 750 gb 7200 rpm SATA 3gb/s 16Mb Internal Hard Drive.
Using this guide: http://osxdaily.com/2012/02/17/make-bootable-os-x-10-8-mountain-lion-usb-install -drive/ (and cross checking other guides) I ended up creating a bootable external drive using my 160gb External Firewire drive for my clean install to my new hard drive. So far so good.
I then shut down the computer, removed the old internal hard drive, installed the new, restarted the computer holding option key and booted up using the External Hard Drive, and the install software started fine. Note: I have attempted to re-erase the drive so many times without luck that I cant remember if I actually successfully erased the drive originally to begin with the installation, but either way I started the OSX reinstall and it got almost all the way finished before it gave me the error message:
"Install failed. Mac OS X Lion couldn’t be installed, because the disk (volume name) is damaged and can’t be repaired. Click restart to restart your computer and try installing again."
restarting of course did nothing, it repeatedly gave me error messages and made me quit installation...
Disk Utility isnt getting me anywhere, im either getting errors like:
"POSIX reports: the operation couldnt be completed. device no configured"
it wont allow me to erase the drive or partition the drive
"Disk Erase failed with the error: File System Formatter Failed"
and everytime the drive fails to erase or partition, it disappears from the list of drives on the left of the disk utility screen and i have to restart the computer for it to reappear for a second try. Typically the volume under the drive is greyed out and says that it is unmounted.
Ive zapped the PRAM.... and Ive done other things that I cant quite remember right now because my brain is boiling from reading too many **** threads on multiple devices....
halp.
halp me plase.

So funny story...
While writing this discussion I had to come to the computer and try to erase the drive so I could see the error code for reference. The erase didnt work as usual but I wrote the error code down here.
I also could not remember the error code for partitioning the drive so I attempted that as well so I could write down the code, and this time it magically partitioned successfully! The only thing I did differently was that I didn't rename the partition because i figured it wouldn't matter anyway. Since the partition was successful, I attempted the Reinstall of ML and it magically worked!!
I dont know what the **** happened but ive been attempting this install every night for like 3 hours since Monday and this is the first time it went through... for no apparent reason?
Ghosts? Magic? Full Moon?
we may never know...
Thanks anyways guys!

Header and footer on a csv download

Hi
Is there an easy way to add an extra header and footer to a csv download ?
What the user wants is a csv of the format
New heading --- the additional heading
col name, col name ..... -- the existing column names
value, value ..... -- the existing values
New footer -- some new text footer
I have tried break formatting but have had no success. The csv produces perfectly but I can't get the additional lines added !
Ta
Bob

No unfortunately I have not found the time to do a blog yet.
Create a blank page and create an AFTER HEADER pl/sql process.
Then add code like the following, changing query as needed
declare
   cursor result_cur is
      select empno, ename, job
        from emp;
begin
   htp.init; -- Wipe out the buffer
   owa_util.mime_header ('application/excel',false);
   htp.p('Content-Disposition: attachment; filename="FormResults.csv"');
   owa_util.http_header_close;
   -- write your header
   htp.p('This is my header');
   htp.p(' ');
   -- write out the column names
   htp.print ( 'Emp Num, Employee Name, Job' );
   --write out each row
   for it in result_cur loop
      htp.print ( '"'||it.empno||'","'||it.ename||'","'||it.job||'"' );
   end loop;
   -- write out footer
   htp.p(' ');
   htp.p('This is my footer');
   -- Send an error code so that the
   -- rest of the HTML does not render
   htmldb__application.g_unrecoverable_error := true;
end;you can call this by making it the redirect target of a button or by adding something like the following in the footer section of your report region assuming the page you created the above process on was page 9
<a href="f?p=APP_ID.:9:&SESSION.">Click here to download CSV</a>sorry the code above shows a # and does not show the f p syntax url which should be f followed by a ?p=&AMP;APP_ID.:9&AMP;:SESSION.
Edited by: Larry Linnemeyer on May 20, 2009 8:08 AM

Get lines starting with a specific word and export it in csv

Hello,
I have a text file of an application that sometimes goes in error.
When the error occurs we have something like that:
12/08/2013 21:36:15 - ERREUR    12/08/2013 21:36:15 - erreur open connexion : -2147467259 !! [IBM][CLI Driver] SQL30081N Erreur de communication détectée. Protocole : "TCP/IP". API de communication
utilisée : "SOCKETS". Emplacement dans lequel l'erreur a été détectée : "192.168.1.15". Fonction de communication détectant l'erreur : "selectForConnectTimeout". Codes d'erreur spécifiques du protocole : "0",
"*", "*". SQLSTATE=08001
12/08/2013 21:36:15 - Machine : testVm
12/08/2013 21:36:15 - ERREUR    12/08/2013 21:36:15 - erreur select repertoire : 3704 !! Cette opération n'est pas autorisée si l'objet est fermé. !! SELECT distinct rep_inter, rep_transfert From exploit.rep WHERE
type_rep = 'E'   and machine = 'testvm' ORDER BY rep_inter,rep_transfert;
12/08/2013 21:36:15 - ERR    12/08/2013 21:36:15 pb trait_repertoire
12/08/2013 21:36:15 - Fin de session
Yes, the message is in French :)
That I need, is to read the file and search the ERREUR and then, include the message until the "Fin de session"
(including the date and the hour that the error occurred).
I tried this command: get-content .\error_Log.txt |Select-String "ERR" -SimpleMatch |
export-csv .\ERREURS-$(Get-Date -Format dd-MMMM-yyyy-HH-mm-ss).csv
But it is catastrophic!!!
The output that i'd like to have is:
DATE - HOUR - message error in three collumns of a CSV file.
Note: In the middle of the message there is a BLANK line, it is normal.
Any ideas will be welcome.
thank you in advance.

Hi,
thanks for answering....your script does partially that I need.
I explain: The output is in three columns but the error message is truncated, that is to say, I don't have the message entirely. To explain you, in the example above, when I generate the CSV file, the part ""192.168.1.15". Fonction de communication
détectant l'erreur : "selectForConnectTimeout". Codes d'erreur spécifiques du protocole : "0", "*", "*". SQLSTATE=08001"
is missing...it goes directly to the line "12/08/2013 21:36:15 - ERREUR    12/08/2013 21:36:15 - erreur select repertoire : 3704 !!".
Also that I need is to remove the double date-hour that appears in the same line.
Thanks once again!

Using Error In and Error Out Clusters within VIs

Quick question for the LabVIEW experts - I try to include Error In and Error Out clusters ICON terminals in all of my VIs. My question is however, if I have a VI with code that does not use any error terminals do I need to include Error In and Error Out clusters in that VI? If my code does not use those terminals I would think that I'd just be passing errors right through this VI and I don't see a purpose of including them.
Thanks!

dems wrote:
As for the idea itself, I personally argue against it. LabVIEW should be a language. Adding a sequence structure and a few wires to a VI is not a language feature.
It's a primitive. There is no wires nor sequence structure in a primitive.
This is one of those that NI and I are just going to have to agree to disagree. When I see every company out there have a wait function in their library just so they can sequence the wait with the error cluster, that tells me there is something wrong with the core language.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Errors 2050 and 2051 repeated in CSV cluster

Similar Messages

Maybe you are looking for