Errors activating HR Business Content: cube 0PA_C01, ODS 0PA_DS02, 0PA_DS02
Hello!!
we are installing a IDES BW system for customer demos, training and so on.
I am tying to activate all HR Business Content, and I began activating Personnel Administration.
Every time that I am trying to activate HR Business Contentt objects, the following error message appears:
Err.tmpo.ejec. CALL_FUNCTION_CONFLICT_LENG
Excep. CX_SY_DYN_CALL_ILLEGAL_TYPE
Error in the ABAP Application Program
The current ABAP program "SAPLRSAOS" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
A function module was called incorrectly.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in
procedure "OSOA_UPLOAD" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The call to the function module "RSA1_OLTPSOURCE_GET_ALL" is incorrect:
In the function module interface, you can specify only
fields of a specific type and length under "I_T_OLTPSOURCE".
Although the currently specified field
" " is the correct type, its length is incorrect.
We have installed the following components:
SAP Netweaver 2004s:
SAP_ABA 700 0015 SAPKA70015 Componente multiaplicaciones
SAP_BASIS 700 0015 SAPKB70015 Sistema Base SAP
PI_BASIS 2005_1_700 0015 SAPKIPYJ7F PI_BASIS 2005_1_700
SAP_BW 700 0017 SAPKW70017 SAP NetWeaver BI 7.0
BI_CONT 703 0008 SAPKIBIIP8 Business Intelligence Content
SAP ECC6.0:
SAP_ABA 700 0015 SAPKA70015 Componente multiaplicaciones
SAP_BASIS 700 0015 SAPKB70015 Sistema Base SAP
ST-PI 2005_1_700 0006 SAPKITLQI6 SAP Solution Tools Plug-In
PI_BASIS 2005_1_700 0015 SAPKIPYJ7F PI_BASIS 2005_1_700
SAP_BW 700 0017 SAPKW70017 SAP NetWeaver BI 7.0
SAP_AP 700 0012 SAPKNA7012 SAP Application Platform
LCAPPS 2005_700 0006 SAPKIBHD06 LC Applications (LCAPPS) 2005_700
SAP_APPL 600 0012 SAPKH60012 Logísitica y Finanzas
EA-IPPE 400 0012 SAPKGPID12 SAP iPPE
EA-APPL 600 0012 SAPKGPAD12 SAP R/3 Enterprise Extension PLM, SCM, Finanzas
EA-DFPS 600 0012 SAPKGPDD12 SAP R/3 Enterprise Extension Fuerzas de defensa y
EA-FINSERV 600 0012 SAPKGPFD12 SAP R/3 Enterprise Extension Financial Services
EA-GLTRADE 600 0012 SAPKGPGD12 SAP R/3 Enterprise Extension Global Trade
EA-HR 600 0028 SAPKGPHD28 SAP R/3 Enterprise Extension HR
EA-PS 600 0012 SAPKGPPD12 SAP R/3 Enterprise Extension Administración pública
EA-RETAIL 600 0012 SAPKGPRD12 SAP R/3 Enterprise Extension Retail
FINBASIS 600 0012 SAPK-60012INFINBASIS Fin. Basis
FI-CAX 600 0012 SAPK-60012INFICAX FI-CA Extended
INSURANCE 600 0012 SAPK-60012ININSURANC SAP Insurance
IS-CWM 600 0012 SAPK-60012INISCWM Industry Solution Catch Weight Management
IS-H 600 0013 SAPK-60013INISH SAP Healthcare
IS-M 600 0012 SAPK-60012INISM SAP MEDIA
IS-OIL 600 0011 SAPK-60011INISOIL IS-OIL
IS-PS-CA 600 0012 SAPK-60012INISPSCA IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-UT 600 0012 SAPK-60012INISUT SAP Utilities/Telecommunication
LSOFE 600 0012 SAPK-60012INLSOFE SAP Learning Solution Front-End
SEM-BW 600 0012 SAPKGS6012 SEM-BW: Strategic Enterprise Management
SLL-LEG 7.00 0006 SAPK-70006INSAPSLL SLL-LEG 700 : Add-On Supplement
WFMCORE 200 0012 SAPK-20012INWFMCORE WFMCORE 200 Upgrade: Meta-Commandfile (D
CPRXRPM 400 0012 SAPK-40012INCPRXRPM SAP xRPM/cProjects/cFolders 4.00 (ABAP)
ECC-DIMP 600 0012 SAPK-60012INECCDIMP DIMP
ERECRUIT 600 0012 SAPK-60012INERECRUIT E-Recruiting
FI-CA 600 0012 SAPK-60012INFICA FI-CA
MRSS 600 0000 - Multi Resource Service Scheduling
ST-A/PI 01G_ECC600 0000 - Application Servicetools for ECC 600
AIN 400 0005 SAPK-40005INAIN AIN 400 : Add-On Supplement
XFT 210_700 0000 - xft business add-on
So, can everybody help me? Do we need any component more in BW or SAP ECC? How can we solve this problem?
Thanks in advanced for your help.
Best regards,
Seshen
Hi Sam,
Please check whether datasources are installed and active in the source system.
For remote activation you need role SAP_RO_BCTRA or authorization object S_RO_BCTRA in your profile.
If not active, you can activate via RSA5.
Afterwards, install the transfer rules again.
If you are lower than SPS8, check note 929935.
Hope this helps,
regards,
Olav
Similar Messages
-
ERROR while activating the Business Content of Sales Cube 0SD_C03
Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar. -
Error in Activating the Business Content Infocube 0CRM_C08
Hi Experts,
when iam trying to activating the business content infocube 0CRM_C08
iam getting few errors
Error-1:- Characteristic 0COUNTY_CDE is still being used as target of transfer rule ZCOUNTY_TEXT
Error-2:- Char. 0CRM_OBTYP3 is exclusively an attribute (cannot be a navigation attribute)
Error-3:- Authorization field CRM_SALORG still being used in authorization objects
Error-4:- Cannot delete authorization field of InfoObject 0CRM_SALORG
Error-5:- InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BB) of characteristic 0MATERIA
Can anyone please clarify regarding these kind of errors.
What i have to do for make a successfull activation
Thanks in Advance
ARUNHi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar. -
Error during activation of business content
Hi
I am facing problems during the activation of the standard business content.
I am trying to activate the infocube 0ic_c03 material stock movement. We are using BW version 3.5 patch level 13.
while activating the business content and using the grouping "in data flow before" there are several errors which come up during the simulation install such as
infoobject XXX is not available in version A
Error when reading data target XXXX
Data source XX not mantained
Key figure XXX is not available in version D
In order to avoid activating pre-installed objects i have deselected them.
I am in urgent need of some help. So any ideas that will help to resolve my problem are assured of being rewarded handsomely!!
thanks in advance!Hi Everyone!
Thanks the responses have been encouraging and i do see a glimmer of hope
since i am fairly new at this I wanted to know
1. does it make sense to install (or activate) the infoobjects which are shown as not available in version A individually and then trying the install of the infocube. It does remove the errors associated with the infoObject as i saw with one infoobject. Does this have any other impact
2. For the data sources i went to rsa5 on the source r3 system. but the data sources listed in the errors were not found (the data source errors that are shown are of the type 0DBDUNS_IMPORT_XXX). Also it is my understanding that the data sources that are required for the inventory cube are 2lis_03_bx , 2lis_03_bf and 2lis_03_um. Is this correct? I do not see them indicated in these errors. What do i do once i am in rsa5 and i select these datasources?
thanks in advance! -
Regarding error occur in business content activation
Hai experts,
when i am activating the business content its going to dump analysis the system is going to give me the error like " message_type_x" using st22 i found that error occured in abap program .It is an predefined program.Is there any solution for that one other wise i have raise this question to service.sap.com.i need emergency.
bye.Hi ,
You have to underastand whether this is happening with all the objects , I mean are you getting this dump for any object you are trying to activate through bi content.
If this is happening with few objects then you have see whether the method of activation bi content is being performed in the correct method.
If thisis happening with all the objects then check all the basic settings and at the same time check authorisations.
Check if you have any thing in SU53 transactions.
Regards
Rahul Bindroo -
How to install the Business Content Cube 0PP_C02
Hello,
Can you please explain me how to install the Business Content Cube 0PP_C02 .
What are the nesessary steps involved in this process. How this Standard Cube is available in
AWB -> Modeling.
What are the nesessary steps involved in the R/3 side.
CAn you please help me in this.
Thanks alot.
Regards,
AnithaHi anitha
TRy this
To transfer and activate a DataSource delivered by SAP with Business Content, in transaction SBIW in the source system choose Business Information Warehouse à Business Content DataSources or Activating SAP Business Content àTransfer Business Content DataSources.
The following figure displays the DataSources in an overview according to the application component.
2. Select the nodes in the application component hierarchy for which you want to transfer DataSources into the active version. Do so by positioning the cursor on the node and choosing Highlight Subtree.
The DataSources lying under the subtree and other subtrees are selected.
3. To check for differences between the active and delivery versions of the DataSources, choose Select Delta.
DataSources for which differences were found in the check (for example, due to changes to the extractor) are highlighted in yellow.
4. To analyze the differences between active and delivered versions of a particular DataSource, select the DataSource and choose Version Comparison. The application log contains further information regarding the version comparison.
5. To transfer a DataSource from the delivery version into the active version, select it in the overview tree using the button Highlight Subtree and choose Transfer DataSources.
If an error occurs, the error log appears.
Regardless of whether data has been successfully transferred into the active version, you can call the log by choosing Display Log.
6. To provide the active version of the DataSource in the connected BI systems and to enable data extraction and transfer, replicate the DataSource(s) with a metadata upload to the BI system.
and in RSA1 in businuess content search ur required cube and select all the req fielsds in the next colums and select before and after is a must..in the selection field..
this will solve ur issue..
Prasanna -
Errors while installing Business Content
Hi,
It is new system, When I am trying to install any Infocube it has given Runtime error OBJECTS_OBJREF_NOT_ASSIGNED. Then implemented the SAP note 1019055.
To Install Business Content I am following: Grouping: In Data flow before and After wards, Collection Mode- Collect Automatically, Source System Assignment and Install .
Now when I am trying to install I am getting these errors
Process LOADING, variant 0PAK_0U36G4BPCOA4BN43PFVZU3A97 has been saved in target system under name1
Process LOADING, variant 0PAK_0AWN44OD08M313H1SIIA96HT7 has been saved in target system under name 1
Process variant LOADING 0PAK_0AWN44OD08M313H1SIIA96HT7 does not exist in version A
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_0AWN44OD08M313H1SIIA96HT7 in the chain
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_0AWN44OD08M313H1SIIA96HT7 in the chain
Process variant LOADING 0PAK_0MPC1AWCV7TGZ1CJ843SRIJZD does not exist in version A
InfoPackage no longer exists in object version A in table RSLDPIO
Variant '0PAK_1909HG1UYCGTBUE171UNQCSDN' of process type 'LOADING' not found in A version
InfoPackage no longer exists in object version A in table RSLDPIO
There many errors of this type.
How to solve the problem. Please help me.
Thanks in advance.
JaswanthaHi Jaswantha,
Installing Business Content Cube would usually require "Grouping" as "Select In Data Flow Before".
This is as per my observations so far according to SAP Best Practices.
Pls. try this and get back.
Hope it helps
Regards
PPMM -
Error when Installing Business Content BW 3.5
Hello Everyone,
When I "Drag n Drop" the infocube 0PS_C021, it shows following errors :
Object 0EMPLOYEE_EDUCATION (InfoSource,ISTD) could not be collected for object PA-PA-IO (Application,APCO)
Message no. RSO296
Diagnosis
You have collected objects in the BW Metadata Repository. Associated objects for the object PA-PA-IO of type Application,APCO have also been collected. Object 0EMPLOYEE_EDUCATION of type InfoSource,ISTD was among these objects. This object 0EMPLOYEE_EDUCATION of type InfoSource,ISTD, is not, however, available in the Metadata Repository.
Object '0EMPLOYEE_EDUCATION' (ISTD) of type 'InfoSource' is not available in version 'D'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '0EMPLOYEE_EDUCATION' (in transport request ISTD) of type 'InfoSource' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version D. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
Please help me to solve these problems.
Regards
SanjivHi Sanjiv,
Check the below thread:
Error when Installing Business Content BW 3.5
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fbabd936493ee7e10000000a1553f7/content.htm
Reg
Pra -
Loading Business Content cubes
Hi
I am new to BW area, and am posting a basic question, Once the Cube is activated from Business content what are the steps to Load data into the infocube and how to identify the right info sources for that cube, can any one please explain?daniel,
the business content from BW already prescribes certain infosources for infocubes (via update rules assigned to them).
once you have identified which datasources are prescribed by business content activation, you should activate the datasources related to these infosources. replicate the datasources in the source system, then activate the transfer rules in BW. then create an infopackage under the infosources and schedule the extraction.
you could also go look around in the forums since this has already been discussed in great detail. =)
hope this helps, and spread the love (by rewarding points). =)
ryan. -
Hi Guys,
When we are extracting data from LOS for ex, 2lis_12_vaitm, 2lis_12_scl or others. some times we are not using the SAP business content cubes. We are creating our own cubes by using the standard LOS.
Can some one please give a clear explnation of some examples which LOS DS and why we have gone for other then business content cube.
If you have any document please post here or send me to this mail [email protected]
Bye...
Sankar Reddyhi
If we want more additional fields to be added to the cube, or the fields in the cube is no longer relevant for our analysis we decide for custom cubes
In that case, we modify the datasources and extract data to accomadate in cubes
Hope this helps
Assign points if useful
Regards
N Ganesh -
Question on activation of Business content.
Hi friends,
Our client is implementing BW , and we are in the process of activation of business content, I already some content activated already , for Porcurement, right not I see , in Administrator work bench > Infoprovider TAB>0MMPUR_IO and all the master data objects under neath it and the same under Infosources tab also , so what is the grouping they might have follwed in installing and with what activation they must have started with ( IO, Infoarea, Insource..data targets ..)?
Once we know what they have followed with , we want to continue the same for others .
thank you.You can still activate content with grouping as required but in the process just make sure you set/flag the Match(x)or Copy and Installation will not impact/overwrite already activated objects.
-
Is it possible to delete data selectively from Business content cubes
Dear Experts,
Requesting you to help me out to know, is it possible to delete data selectively from Business content cubes.
When I'm trying to delete selectively from Business content cubes, the background job gets cancelled with ST22 logs stating
A RAISE statement in the program "SAPLRSDRD" raised the exception condition "X_MESSAGE".
Since the exception was not intercepted by a superior program, processing was terminated.
and i tried with few more Technical content cubes but the same thing happens.
Pls let me know how to selectively delete data from Business content cubes if it's possible?.
Thanks in advance for your favorable assistance.
Regards,
Ramesh-Kumar.Hi Ramesh,
Follow below steps for selective deletion:
1. Transaction code: Use the Transaction code DELETE_FACTS.
2. Generate selective deletion program:
A report program will be generated of the given name, here .
3. Selection screen:
Take the deletion program u201CZDEL_EPBGu201D to the transaction code SE38 to see/execute the program.
After executing it will take you to a selection screen:
As we need to carry out deletion selective on Calendar week, we need to get the screen field for the field Calendar week. For this, click on the Calendar week field and press F1.
Click on the technical information button (marked in red box above) you will get below screen:
ABAP program to carry out the Calendar week calculation
Problem scenario: As stated earlier the requirement is to delete the data from the cube based on the calendar week. Thus a code must be developed such that the number of weeks should be taken as input and corresponding calendar week should be determined. This calendar week should be then passed to the deletion program in order to carry out the data deletion from the InfoCube.
Transaction code: Use T-code SE38 in order to create a program.
Logic: Suppose we need to delete the data older than 100 weeks.
a. Get the number of weeks and system date in variables and calculate the total number of days :
lv_week = 100. *number of weeks
lv_dte = sy-datum. *system date
v_totaldays = lv_week * 7. *total days
b. Get the corresponding calendar day from the total days. This is obtained by simply subtracting the total no. of days from the system date.
lv_calday = lv_dte - v_totaldays. *corresponding calday.
c. Now in order to get the calendar week corresponding to the calculated calendar day we must call a function module 'DATE_TO_PERIOD_CONVERT'. This function module takes input as Calendar day and Fiscal year variant and returns the appropriate fiscal period.
Get the sales week time elements
call function 'DATE_TO_PERIOD_CONVERT'
exporting
i_date = lv_calday
i_periv = lc_sales
importing
e_buper = lv_period
e_gjahr = lv_year
exceptions
input_false = 1
t009_notfound = 2
t009b_notfound = 3.
if sy-subrc = 0.
ls_time-calweek(4) = lv_year.
ls_time-calweek+4(2) = lv_period.
endif.
v_week = ls_boots_time-calweek.
Note: We can pass the fiscal year variant which can be obtained from the table T009B.For e.g. here fiscal year variant lc_sales = Z2. LS_TIME will be any table with suitable time units.
d. Now we have obtained the required calendar week in the v_week variable. This calendar week is the week till which we need to keep the data. And older data than this week will be deleted. This deletion will be done by the deletion program
Submitting the Data deletion program for ZEPBGC01 and key field
SUBMIT ZDEL_EPBG WITH C039 LT v_week.
Here the calendar week value is submitted to the deletion program ZDEL_EPBG with the screen field of calendar week.
Hope ... this will help you..
Thanks,
Jitendra -
Urgent Help on Business Content Cubes!
Hi Experts,
Could any one help me on the below requirement please?
We need to provide an estimate to the customer about the below.
SAP PM/ Customer Service:
-Sales inquiry and sales contract (Including Billing Plan)
-Service Notifications and Orders (including Refurbishment)
-Graphical resource (Personnel/Contractor) allocation
-Timesheet and Resource Related Billing
-Service Order related Purchasing
-Planned/Cyclical Maintenance
We have to find whether there are any business Content Cubes available for the above?
Could any one have the idea which Business content cubes can be used for the above and give me some explanation pleaseeeeeee!
Waiting for your valuable inputs...
Many Thanks in advance..
Regards,
BHVarma,
This is the URL for the BW 3.5 Business Content, you can check here:
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
Here's for BI 7.0:
http://help.sap.com/saphelp_nw70/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
Good luck!
Luis -
Where can we find Business content Cubes,DSo,Reports for CS,PM,Treasury Man
Hi
Where can we find Business content Cubes,DSO,Reports for CS,PM,Treasury Management modules in help.sap.com. I searched in help.sap.com.But i haven't get exact link in the site. I haven't have access for the BI system.Can any list out the cubes ,DSO's,report that are in Business content for the above modules or give me the help.sap.com links, so that i can go through on it. It is for BI 7.O.
Does is there any differences in Business content objects for SAP BW 3.5 and SAP BI 7.0.
Thanks®ards
RevathiYou can find the businee contect in SAP Network Libraray
http://help.sap.com/saphelp_nw70/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
where you will find all the information.
Business content is no differnce between in 3,5 or 7.0..may add few more -
Hi Bwers,
Can any buddy help me the above how we install the Business Content for 0PA_C01, 0PY_MC02 & 0PY_C02 (HR & Payroll)??
we have the DataSource below:
0HR_PT_2
0HR_PT_1
PA2002
If some buddy got any documents related to the above please kindly send it to my mail ID: [email protected]
full points will be awarded for any useful answers.
Many Thanks in advance
BH
Message was edited by:
Varma BhHi Varma Bh
Just have a look @ the following..
<u><i><b>BW HR Reports (Payroll)
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/15/3de338b56ccc44e10000000a11405a/frameset.htm">0PY_MC02</a>
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/22/7883373c1af326e10000009b38f8cf/frameset.htm">0PY_C02</a></b></i></u>
Regards
R M K
**Winners don't do different things, they do things differently**
> Hi Bwers,
> Can any buddy help me the above how we install the
> Business Content for 0PA_C01, 0PY_MC02 & 0PY_C02 (HR
> & Payroll)??
> we have the DataSource below:
> 0HR_PT_2
> 0HR_PT_1
> PA2002
>
> If some buddy got any documents related to the above
> please kindly send it to my mail ID:
> [email protected]
>
> full points will be awarded for any useful answers.
>
> Many Thanks in advance
> BH
>
> Message was edited by:
> Varma Bh
Maybe you are looking for
-
ISE 1.2 - AV/AS Remediation missing vendors
Trying to create a remediation rule in ISE 1.2 patch 3 and the drop down list for the AV/AS Vendor Name is not scrollable so I am not able to select our AS/AV vendor. See picture below:
-
OnMouseClicked Event Is Failing To Fire
After clicking on the blue rectangle while the program is running the onMouseClicked Event fails to fire. I am expecting a message to appear in NB's Output window. Below is the relevant source code in relation to handling the onMouseClicked event: pa
-
Hiding Horizontal lines in table
Hi All, In XML publisher, I am having output like Deptnno: 10 Empno Ename Sal Comm 7782 CLARK 1000 7752 MILLER 2500 500 7488 KING 3500 Deptnno: 20 Empno Ename Sal Comm 7782 FORD 3000 7752 SCOTT 2975 500 7488 JONES 3000 Now, I want to hide the lines
-
How can I found out what was changed to fix a JDK bug?
For example I'd like to know what was changed to fix this bug: https://bugs.openjdk.java.net/browse/JDK-8064358
-
How to display remote front panels of subvis that are already open
I inherited an RT project that uses remote front panels for nearly all the user interfaces. The host application opens a remote front panel the the top level RT vi, and there are several subvis on the RT system that are opened from that top level vi