Errors after playing subway surf

When i play subway surf on the IOS 7 the IOS Doesn't lcok and turn off the screen and the notification center and control center made invisible and doesn't work please help me ,,,

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Similar Messages

Subway Surf

I have seen a guy playing subway surf on his Z10. But it doesn't shows up in BB world.
How is that possible ?

there is no need to go to 10.2 as right now i am play subway surfer on 10.1 ... if u need any help regarding this do tell me

Subway surfer locked on loading after trying to update, how to fix

TRied updating subway surfer. Now it says loading but can't open it or cancel update.

Hi there Dianne May,
You may find the troubleshooting steps in the article below helpful if you are experiencing issues with an app you downloaded from the App Store.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
-Griff W.

When i login to my account and it takes me to the desktop, the error sound plays, then the rainbow wheel appears, and finder immediately stops responding

It started yesterday when i was listening to itunes when all of a sudden the music stopped playing and i had to hold down the power button to shut it down and reboot, and then, when i logged back in, the error sound played, and then finder opened up, but the window was grayed out like i had another app selected, bu i didn't, so i tried to open up itunes and the icon started bouncing and then it stopped midbounce and i had to reboot again because finder wasnt responding. now when i log in, the error sound plays, and finder immediately stops working and then i have to reboot again because i cant click anything and i cant properly relaunch finder. please help

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Monitor won't enter power save after playing You Tube videos...

Hi
An issue has developed on my system in the last couple of months for which, after having done a lot of research and testing, a solution has not been found. After playing a video in You Tube, my monitor won't go into power save mode after the prescribed time. It tries to go off for a second and the screen goes blank but then comes straight on again. This happens after playing the You Tube videos in Firefox, Google Chrome and Internet Explorer. I am running Windows XP Professional and I have the latest version of Adobe Flashplayer installed, the latest graphics card drivers, the latest version of direct x 9.0c.
To clear this error, I have to go into my XP power schemes settings and change it to another power scheme and then change it back to my default power scheme. However, as soon as I play another you tube video the same problem re-occurs.
I have tried turning off hardware acceleration but this makes no difference. My graphics card is a Gigabyte gv-nx86t512h: http://uk.gigabyte.com/products/product-page.aspx?pid=2604#ov
This never used to happen until recently. It seems that there is something with the Flashplayer that is not compatible with Firefox, Chrome, Internet Explorer etc.
Any ideas as to what may be causing this and what can be done to overcome it would be greatly appreciated as it is a real nuisance.
Many thanks.
D

thanks for your suggestions.
i found the solution/workaround from somone else on the adobe forums:
Go to control panel, display, screen saver, choose a random screen saver, set a long time (i.e. 60 min, but always longer than your monitor shut off time), then select no screen saver, and save! Simple as that…

.wav error after update

This past week my curve did an automatic update when I plugged it into the manager. Prior to the update I was able to play the .wav files that are emailed to me by my office voicemail system. Now after the update I get an error stated unsupported format. I'm on Sprint.
Anyone know why this error is occurring and how I can get it to play the .wav files again?
Thanks,

Hello,
I get the same error after updating through Help->Check for Updates. I am at version 1.1.2.25 and the update does not change the version number of Oracle SQL Developer (Help->About), it remains at 1.1.2.25 (although if I look in extensions tab, it says: oracle.sqldeveloper 1.1.3.27.66 Loaded, possible bug in displaying version number?). These are the updates applied:
Upgraded Extensions
Oracle Microsoft Access Browser version 1.1.3.27.66
Oracle SQL Developer - Snippet version 10.1.3.27.66
Oracle SQL Developer version 1.1.3.27.66
Oracle SQL Developer - Reports version 10.1.3.27.66
Oracle SQL Server Browser version 1.1.3.27.66
Oracle MySQL Browser version 1.1.3.27.66
Oracle SQL Developer - Worksheet version 10.1.3.27.66
Oracle SQL Developer - Extras version 1.1.3.27.66
Oracle SQL Developer - SearchBar version 10.1.3.27.66
Oracle SQL Developer - Object Viewer version 10.1.3.27.66
I ran the update several times and was able to reproduce the error under a specific condition. If I am connected to a database at the time of the update I get the error. If I am not conneceted at the time of the update I do not get the error.
As stated, by Donal, sql developer seems to get over the problem after restarting itself twice.
Mark

IOS 6.0.1 Safari won't play audio files. Error: "Cannot play audio file."

I recently updated my iPad to iOS 6.0.1, now Safari won't play audio files in any format. Error: "Cannot play audio file." Previously, it worked fine. I tried downloading and using GoogleChrome and Opera Mini, and these also won't play audio. What's up??

Solved the problem. It seems that once iOS 6.0.1 installed, it caused all of my browsers to mishandle audio files. When I reset the iPad, that cleared up the problem.
Before upgrading to iOS 6, my browsers would "autoplay" the sound files. After iOS 6, "autoplay" is disabled so you have to manually click play to play them.
Nonetheless, everything is working fine again except for "autoplay," which I can live with.

How to repair projects that get a "TickTime.cpp-290" error after opening a specific project.

This is a guide to repair projects that get a "TickTime.cpp-290" error after opening a specific project.
Prerequisites:
Project repair tool (download link below)
WinRAR or any file archiver
Damaged project file
As an example, let's say the name of my damaged project is 'test.prproj'
Steps:
1. Download the project repair tool here: https://www.dropbox.com/s/3fyja0ws7l5gkbt/pp-repair-0.1.35.zip?dl=0
2. Rename your project file extension from 'test.prproj' to 'test.zip' (a warning appears saying the file might become unusable. Do not be concerned about the warning. Click OK and move to the next step.)
3. Extract the contents of 'test.zip' to a location on your computer. (Right click on the file and select ‘Extract files’ > Choose a location > Click OK).
4. Go to the extracted location. Note the file 'test' has no extension.
5. Rename the file, 'test.prproj'.
6. Launch the project repair tool, and then select the file 'test.prproj' (the one that we renamed in the last step).
7. Deselect all the check-boxes in the project repair tool.
8. Click the Repair button.
9. After a few seconds you see a message saying 'Success'.
10. Open the repaired file in Premiere Pro and then reset the workspace. Choose Window > Workspace > Reset Current Workspace.
11. Click the Save button to reduce the project size.
12. Your project is now repaired.
NOTE: If a file containing letters such as ã, å, ê, í, ú don’t repair, rename the file to something that doesn't contain these letters.

Hi Rameez,
first of all thanks a bunch for the tool - it saved our neck this morning on a tight deadline.
One minor note: I did get a message that the (already uncompressed + renamed) file is not uncompressed until I ran the tool as Administrator so you might want to add that to the FAQ entry...
Other than that I'm very much interested in what triggers this bug so we can potentially prevent it.
Background:
Specs: Windows 8.1, German locale (ie comma is decimal symbol), Premiere Pro CC 2014.2 installed in English
My colleague who ran into the TickTime.cpp-290 error remembers having created a new workspace while working on the project. That seems to have triggered the issue as we haven't had any trouble on other projects yet. It also got saved into the project file:
<MZ.Project.WorkspaceName>Bearbeitung</MZ.Project.WorkspaceName>
Any autosaves after he added the workspace were corrupted as well while the ones dating back to earlier still open fine.
I'd like to mention that Premiere did import previous (German language) workspaces - dating back until CS5. Not sure if that comes into play.
On the other hand, the debug log looks like there only is an issue with the decimal symbol:
10:08:06: Input: C:/temp/trouble/uncompressed/final.prproj
10:08:06: Path: C:/temp/trouble/uncompressed Basename: final Extension:prproj
10:08:06: 19852-> from: <PlaybackSpeed>0,069148936170212769</PlaybackSpeed>
10:08:06: 19852-> to: <PlaybackSpeed>0.069148936170212769</PlaybackSpeed>
10:08:06: 23970-> from: <PlaybackSpeed>0,0062741915889604422</PlaybackSpeed>
10:08:06: 23970-> to: <PlaybackSpeed>0.0062741915889604422</PlaybackSpeed>
I really need to make sure that this is no general problem with German locales as we have multiple users on this kind of config and can't afford projects breaking.
Or do we "just" need to watch out to get rid of the old workspaces? I'm a little puzzled to be honest.
Maybe it helps to mention that we are on CC Enterprise
Best regards,
Mike

Audio don't work after playing MPMoviePlayerController

Hi.
I have trouble with playing any sounds or music, is video was played before.
For playing audio i use SoundEngine from crash lander sample.
video loading and playing code:
NSURL* url=[NSURL fileURLWithPath:moviePath];
mMoviePlayer = [[MPMoviePlayerController alloc] initWithContentURL:url];
// Register to receive a notification when the movie has finished playing.
[[NSNotificationCenter defaultCenter] addObserver:g_objC
selector:@selector(moviePlayBackDidFinish:)
name:MPMoviePlayerPlaybackDidFinishNotification
object:mMoviePlayer];
[mMoviePlayer setMovieControlMode:MPMovieControlModeHidden];
[mMoviePlayer setScalingMode:MPMovieScalingModeNone];
[mMoviePlayer play];
and after playing:
- (void) moviePlayBackDidFinish:(NSNotification*)aNotification{
MPMoviePlayerController* theMovie=[aNotification object];
[[NSNotificationCenter defaultCenter] removeObserver:self
name:MPMoviePlayerPlaybackDidFinishNotification object:mMoviePlayer];
[mMoviePlayer release];
// UInt32 sessionCategory = kAudioSessionCategory_MediaPlayback;
// AudioSessionSetProperty(kAudioSessionProperty_AudioCategory, sizeof(sessionCategory), &sessionCategory);
// AudioSessionSetActive(YES);
after releasing [mMoviePlayer retainCount] return 2, and SoundEngine at start playing background track has error at AudioQueuePrime.
error code is extremly large.
Sounds is not playing by openal too.
In simulator - all works. but on devices - there is no any sounds or music.
Please advice.
SoundEngine is inited before allocation MPMOviePlayer.

You'll need to post more details: how is audio added, to background, slide, object or with Play audio command? How did you test? Are you talking about the Rewind button in a playbar?

ITunes "hangs" after playing first two tracks

Testing with three different CDs, I have discovered that my iTunes "hangs" after playing the first two tracks. That is, it will play the first two tracks fine, then appear to play the first two seconds of the second track again and stop. I am also unable to eject the CD or quit the program, instead getting the Spinning Beach Ball of Death, so I must force-quit the program, after which I am able to eject the CD.
I have repaired the disk permissions and verified the disk with no problem in both cases. I have also shut down and restarted a few times between tests, but to no avail. I hope this issue is not an indication of a physical problem with my drive. (I have not tried running Disk Warrior yet, but that may be my next step.) Also, this problem occurred both before and after I upgraded to 10.4.11 so it seems to be unrelated to this OS upgrade, but it may be related to my upgrading to iTunes 7.5. Any ideas or suggestions?
Thanks,
Paul

Yep, that did the trick. Many thanks! In fact, after unchecking Error Correction and successfully playing a CD all the way through, I even rechecked EC and immediately tried playing the same CD, with the same problematic "Track 2 Hanging" result.
Odd that this should be the solution, though. It begs the question as to whether or not EC should ever be checked. I realize that this feature is for importing and not for playing tracks, but it seems tedious to have to remember to check EC when importing and then uncheck it for playing. I guess I'm asking whether or not EC is effective enough to warrant the inconvenience of having to uncheck and recheck and uncheck, etc. Any thoughts on that?

Quicktime errors after effects cc2014

i've been getting quicktime errors in after effects cc14, windows 8.1, update 1. when importing a quicktime file that opens and plays in vlc, and quicktime player, i'm getting the error "After Effects error: file 'xxx.mov" cannot be imported this .mov file is damaged or unsupported. i've uninstalled quicktime and reinstalled to no avail.

Does AE CC work? (I mean, you're using version 13. Does version 12 work?)
Have you tried the suggestions here: fixing permissions problem that impedes start of Adobe applications and here: troubleshooting QuickTime errors with After Effects ?

After updating to osx 10.8.2 and itunes 10.7, iTunes crashes consistently after playing one song

After updating to osx 10.8.2 and itunes 10.7, iTunes crashes consistently after playing one song. Song progress indicator actually stops working after 30 seconds or so and iTunes can no longer be closed. However, the song finishes playing, but the next one will not start.
I tried on different computers, with different iTunes libraries, both on internal and external media. It ALWAYS happens.
Any suggestions?

I downgrade to itunes 10.6.3 and the error still appears.
I have to download this utility http://www.macroplant.com/iexplorer/download-ie3-mac.php
And I deleted this file:
/private/var/mobile/Media/iTunes_Control/iTunes/iTunesCDB
That fix the problem.
Now my iphone is working without issues on latest version of itunes 10.7

TS1702 My brother was on my ipod and purchased items from subway surfer which costs, £14.68. How can i get a refund? Or how can i cancel it?

Please help me!
My brother was on my ipod and purchased items from subway surfer which costs, £14.68. How can i get a refund? Or how can i cancel it?

"What do you mean? "
What don't you understand?
"He didn't know what he was doing"
Yet, you let him play with you ipod.
You can try contacting itunes support and asking for an exception, but they are under no obligation to allow.
He didn't know what he was doing

Reset subway surf in game center

Reset subway surf in game center

Nevermind...after some more searching I found this, it worked!
http://www.mac-forums.com/forums/os-x-operating-system/280166-mountain-lion-game -center-problem.html
Scroll down until you see the instructions for the Terminal commands, and remember that you need to hit the control key to make the commands work, NOT the command key!

Macbookpro i7 2011 restarts when it gets hot after playing games?

Everytime i try play Starcraft 2, my macbook will display a grey restart message after a few games and i end up getting an error after i restart my laptop. i just got my laptop 2 weeks ago and is finding this incredibly anoyying. does it always restart everytime the laptop gets too hot??

You bought a new machine that has a new operating system 10.7 and the third party program is tailored for the previous OS X version of 10.6
Try to find out if there is a update for 10.7 for your third party programs.
Right now all you can do is apply Software Update under the Apple menu for OS X and wait for updates, contact the developer when they expect a update.
If your experiencing shutdowns with other high CPU/GPU programs, it could be something wrong with the machine itself.
Perform a HardWare Test you may have a dead sensor or fan.
Install iStat and monitor your machine for unusal behaivor, post your results here for comparison with others.
Hail Mary list
1: SMC reset
https://support.apple.com/kb/HT3964
2: PRAM reset
http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
3: HardWare Test
https://support.apple.com/kb/HT1509
4: Re-apply Firmware via CD (only works if it failed to install)
A failed firmware install the computer boots to a grey screen with a progress bar that stops
https://support.apple.com/kb/HT2213
Consult this page here to get the correct firmware for your machine
https://support.apple.com/kb/HT1237
5: If you boot to a grey screen, flashing folder, spinning gear etc
(flashing folder fix: try hold option while booting, select your boot drive, then set as Startup in System Preferences)
https://support.apple.com/kb/TS2570
6: If you have "you need to restart" kernel panic
https://support.apple.com/kb/TS3742
Boot the computer holding the Shift Key down for "Safe mode" this disables third party kernel extension files (.kext) that load upon boot. Look in your system/library/extensions folder for names of kexts files that correspond to any of your third party software and/or simply check for updates for all your software. If none, consult the developer which kext files to remove out of the folder.
If you have perhaps bad RAM, test using Rember extended overnight.
Clean your OSX install disk's bottom with a bit of rubbing alcohol on a very soft cloth and polish.
If you need another OS X Snow Leopard grey disk without possible imperfections, call Apple with your Serial number (under the Apple Menu>About this Mac> more info)
Firewire Target Disk Mode can get your files off the machine if it works and you have another Mac.
https://support.apple.com/kb/ht1661
For more trouble shooting and backup, restore and performance read here, including correctly formatting a external drive, and making a data rescue drive to boot the computer from and grab your files off the machine, reinstalling OS X in various ways etc. Pondini's TimeMachine page etc.
https://discussions.apple.com/message/16276201#16276201

Errors after playing subway surf

Similar Messages

Maybe you are looking for