Errors and shut down CONSTANTLY

I am having trouble with my S10 since I got it and I haven't seen anyone else with these posts. The screen turns to blue, comes up with error codes ( Stop 0x0000003, 0x85573b28, 0x85573c9c, 0x805D297c) A process or thread critical to system operation has failed.Beginning physical memory dump.
I called customer service and initially they were quite helpful. Instituted returning the computer for repair. (reset bios, reimaged hard drive, reset factory defaults. (incidentally, the time won't stay set) I received it back and the very first time I booted it up, same thing. I called again, and as directed, let them know it was a returned repair. Not so helpful the second time around. I still get the messages (now a new one too, Stop C000021A. I understand this may be a small glitch, but some help would really be appreciated!
I am running simple applications, no video, I don't think this should be happening and I guess I am not the only one disappointed with support from what I have seen on these forums.

Did you try a restore to factory default?
If so did the problem clear.
If the S10 works correctly after the Restore to factory default but before you install any software then the problem is not with the S10
Frank
Kenmore, WA
USA

Similar Messages

Running Premiere PrO cs6. After upgrading to Yosemite 10.10.2 Adobe Premiere wont run, come up with system error and shuts down. Any one else had this issue?

Running Premiere PrO cs6. After upgrading to Yosemite 10.10.2 Adobe Premiere wont run, come up with system error and shuts down. Any one else had this issue?

can try this Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)

Titler has serious error and shuts down program

I have been using the titler in Premier CS3 and every time I try to make a font change the program says that there is a serious error and must shut down the program. I have never lost any information since the program has been able to recover from the error and save the data. It is a pain since I can't change the font. Does anyone have any ideas how to remedy this.
I have looked on the Adobe site for answers but the site is a nightmare of never ending loops when trying to report a problem.

I have not heard of any nVidia drivers causing problems with fonts, though there were several driver versions, about a year ago, where some gamer-only functions did not work in Adobe programs.
Now, with Titler, this ARTICLE might be helpful.
Good luck,
Hunt

Application error and shut down

Win XP, SP3, Intel 2 Duo, 2.4 GHz, 1 GB RAM, PreE 7
I am in the middle of creating a slideshow with the 1st half having still shots, using titles. All seemed fine. Added several mpg videos, all seemed fine. However, now I am adding titles in between the videos and I keep getting the following error.
Adobe Premiere Elements has encountered a problem and needs to shut down. I chose not to send the report to Microsoft.
Adobe Premiere Elements.exe Application Error
The exception unknown software exception 0xc000000d occurred in the application at location 0x78138aa0. Click ok to terminate the program.
If I try to add a new title, it shuts down right away. However, I was able to copy and paste titles that I already created in the 1st half and can bring down into the timeline without trouble. But when I try to edit it, the program shuts down with the above error.

ghighigirl59 wrote:
Often, when there is a memory address error, it's because a program either did not properly report its memory address usage to the OS, or have terminated, and did not release the memory, as the OS expected.
Also, Steve makes some very good points. After you follow up on those, I look into these, if things have not improved.
First, the tips in this ARTICLE might be useful for setting up the computer, and then getting it ready for an editing session.
Next, when a program shuts down, hangs, or brings the system down, there is often a breadcrumb trail left behind. The tips in this ARTICLE will give you tips on finding clues in that breadcrumb trail.
Good luck,
Hunt
The artical is wonderful, I'm new here, Your info is very helpful to my study.

Desktop manager errors and shuts down every time I try to sync my Outlook...Help!

Anyone having a similar issue..installed, removed and reinstalled Desktop Manager and everytime I attempt to sync with Outlook it states that Desktop Manager has encountered an error and needs to close. I haven't been able to sync at all. It's my first BB, go easy on me. I would appreciate any assistance!

Well reading some other discussions i have found to try deauthirizing and reauthorizing, that didn't work. I guess i could remove iTunes and reinstall, but i hate to do that. Maybe I should take all the music off and sync and then try putting it back on? Worked before i put music on there, but then there wasn't much to sync at that time. Anyone know of other possible causes that would make iTunes stop working?

Starting iPlanet Application server reports an error and shuts down the ldap server

Hi,
This has been happening to me starting today. I have kept the service to
be interactive with the desktop. The starting of the service doesn't even
open up the command prompt.
The specific error is
Error 2147 : Internal server error.
Looking up on this error on gave me a statement :
"Error 2147
The specified parameter could not be found in the configuration information.
Explanation: Windows NT could not find a particular entry in your
configuration.
Action: Ask your network administrator to check your configuration. The
administrator should make sure your system configuration contains all
information required to run Windows NT and any associated applications. "
Can anybody put some light on this. The version of iplanet is 6.0 SP2 and is
being run on windows NT workstation.
Kind regards,
Gurjit

I ran into this error the other night talking to an openldap server running on solaris ... after hours and hours and hours and hours it turned out to be ...
wait for it
wait
My client was sending ldap V2 and I set this in my openldap slapd.conf file
allow bind_v2
I hope this helps.

Can't execute PSE 10 today...giving me a runtime error and shuts down.

I have been using this program successfully for sometime but today program won't open because of a runtime error. I have read some of the posts but they are too complicated for me to understand. I need a clear answer on how to resolve this.

There is another way to remove preferences.
Go to location "C:\Users\[User]\AppData\Roaming\Adobe\Photoshop Elements" and delete the 10.0 folder there. Please make sure that "Appdata" is hidden folder so you have change the folder visible permission from controlpanel in case you don't see the appdata folder.
Hope this might help.

I just updated my Iphone 4 with the latest update form Itunes and it killed it. It said some error and shut down and went to the install itunes screen. I have lost everything! This is ridiculous!

As above, I updated my phone, no jail break no nothing and its stuffed. All the money I have spent on in app purchases all gone?
I am gutted, all because if Apple stuffing up? That is not fair. Has anyone else had a similar experience with the recent update?

Thanks Malvin, I have calmed down a bit, it still says 5minutes till back up is complete, I did sync my phone. At this point I will just be relieved to get it to turn on to normal, then I will start worrying about apps.
What on earth is wrong with the updates? I think I am just going to ignore them from now on. The previous update locked my itunes and I couldn't access my apps untill i downloaded another app (thanks to these forums).
I will post back in a few minutes once it is complete.

Fatal Error - Incopy CS6 crashes everytime we try to launch. Giving us a fatal error and shuts down.

Do we need to re-download the whole program or is there an update? Any helo is greatly appreciated.

http://kb.mozillazine.org/Firefox_crashes

I have MacBook Pro and whenever I start Aperature 3 it stays on for about 5 minutes then it shuts down with an error of shutting down unexpected... anything??

Hello, I have MacBook Pro and whenever I start Aperature 3 it stays on for about 5 minutes then it shuts down with an error of shutting down unexpected... anything??
Also does anyone know how to take something from one picture and add it to another in aperature?
Thank you!!!

I had the exact same problem. Here is what an Apple Support person told me to do - and it worked like a charm!
Go to your APPLICATIONS Folder. Find a folder within that folder called TOOLBARS. Remove the ENTIRE folder. Once you remove that folder, your Aperture should work perfectly.
There is something in that folder that you don't need that messes with Aperture. Try it. Mine worked perfectly!

I SCREWD UP AND SHUT DOWN MY MAC WHEN IT WAS IN THE PRIVLEDGES STAGE BECAUSE MY PLUG-INS FOR AFTER EFFECTS WASNT WORKING, WHEN I SHUT IT DOWN AND TRIED TO START IT BACK UP, MY MAC KEPT RESTARTING, TEST-RAN-ERROR..4MOT/1/40000003:HDD-14444? WAT IS THIS?

I SCREWD UP AND SHUT DOWN MY MAC WHEN IT WAS IN THE PRIVLEDGES STAGE BECAUSE MY PLUG-INS FOR AFTER EFFECTS WASNT WORKING, WHEN I SHUT IT DOWN AND TRIED TO START IT BACK UP, MY MAC KEPT RESTARTING, TEST-RAN-ERROR..4MOT/1/40000003:HDD-14444? WAT IS THIS? WAT DO I DO TO GET MY MAC BACK RUNNING

I believe you've posted this multiple times. Once is all that's needed. Also, please don't use all caps. Aside from the fact it means you're shouting it's also harder to read than mixed case.
The error means a bad fan motor or the HDD has failed. In your case it's the latter. You can try the following:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.

When synchronizing my iphone4 on the computer it errors out when optimizing the photos and shuts down iTunes. Any idea what to do to get the synch working?

When synchronizing my iphone4 on the computer it errors out when optimizing the photos and shuts down iTunes. Any idea what to do to get the synch working?

OKay, here is the deal. You cannot change the location of encrypted files nor can you share them with other machines. There is no file server for iTunes so even if you export the movie index from iTunes to an external volume, each time you reboot your computer itunes has to reindex the external drive every time you want to access the files. The second you run your mobile computer without the external drive or try to access the HD movies from another device or another user on the same network, the indexing gets out of synch. The entire process is self defeating regardless. The HD movies are encapsulized by apple to stream to your devices via iCloud and NOT via Cloud. Only your TV can play 1080p. That single file you download from iTunes has mutiple versions of the same video in the capsul, one version for each type of apple device. There are no 1080p apple devices except for the Apple TV. When you buy a movie you are buying a license and not the movie. It's going to get worse with all the new copywrite laws. Already you cant share any apple devices with other itunes accounts. Your airport express just stopped streaming music to all users on the local home sharing Cloud. Only the one user for each device and soon only airplay speakers connected directly to the device. No more passthru via your TV and no more file sharing with other accounts on the same wi-fi. All the ISPs are doing the same thing. And soon everybody will be buying their phones and TV's and iPads from the cabble guy.
Apple has done a poor job of educating the consumer as to the difference between the Cloud and iCloud. They are not the same at all.
Message was edited by: ronfromwoodland hills

Why is my mac (OS X Lion) logging me off and shutting down randomly? Also web browsers (safari, chrome and mozilla) and applications (word, excel) are shutting down and then have error reports? Please help!!

My Mac (OS X Lion) keeps logging me off and shutting down randomly.. Also my web browsers (Chrome, Mozilla & Safari) keep quitting and so do my applications (word, excel).. Please help!

My Mac (OS X Lion) keeps logging me off and shutting down randomly.. Also my web browsers (Chrome, Mozilla & Safari) keep quitting and so do my applications (word, excel).. Please help!

Hi. There is a ghost search bar on my iMac screen which flashes constantly, even during start up and shut down. How can i make this go away? Please help. x

Hi There is a ghost search bar on my iMac that flashes continually, even during start up and shut down. How can i make this go away? Please help. x

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

When I log in to my admin account. Mac hangs for a while and shuts down

I had a error first something like cannot open the home folder. Since then when I log in with my user and password mac icon comes in and then a scroll bar type of things appears at the bottom and shuts down. Can u help.

The icon in the upper right of the screen (assuming you are using the Mail app) that looks like a square with a pen is the new message button. Tap that to create a new mail message.

Errors and shut down CONSTANTLY

Similar Messages

Maybe you are looking for