Errors Backing Up Profiles - Problem Not Actually Solved....​.
OK,
So I thought this issue was resolved from my previous thread. I cleared the profiles database, did a memory clean, cleared browser cache & cookies (just in case), cleared the log (Alt + LGLG), then did a battery pull. Then I re-created my custom profiles and ran a backup again and it ran OK. So I was hoping that my backup was OK and everything. [This was all done at work.....]
Went home and ran a sync and backup on my home machine and the backup alerted me [again] during profiles saying that 6 of 8 profiles were retrieved. So this morning I came back into work and repeated the clearing process from above and restored the profiles & profiles options from the previous day's "good" backup, then ran another backup. No dice. Still got the same issue while backing up profiles.
So what should I do now? I tried to find a support address for Blackberry on their site, but they didn't seem to want to give it up. Any tips here anyone?
OK,
So I thought this issue was resolved from my previous thread. I cleared the profiles database, did a memory clean, cleared browser cache & cookies (just in case), cleared the log (Alt + LGLG), then did a battery pull. Then I re-created my custom profiles and ran a backup again and it ran OK. So I was hoping that my backup was OK and everything. [This was all done at work.....]
Went home and ran a sync and backup on my home machine and the backup alerted me [again] during profiles saying that 6 of 8 profiles were retrieved. So this morning I came back into work and repeated the clearing process from above and restored the profiles & profiles options from the previous day's "good" backup, then ran another backup. No dice. Still got the same issue while backing up profiles.
So what should I do now? I tried to find a support address for Blackberry on their site, but they didn't seem to want to give it up. Any tips here anyone?
Similar Messages
-
Invoice EDI error : EDI: Partner profile inbound not available
Hi EDI experts ,
We are connecting our SAP ECC 6 ( Ehp 4) system to 3rd party system Mincom via SAP PI, to send PO Creation message (Outbound) and receive Vendor Invoice message( inbound). We already done all the settings..Output determination procedure, Partner Profile ( WE20) , Port creation , Condition Records, EDI settings in SPRO for invoice..etc as below:
Logical system ( BD54)
ECC system - EDACLNT112,
PI systems u2013 IDACLNT210
Third party u2013 LSMINCOM
Port ( WE21)
IDACLNT510 : For PI with RFC destination IDACLNT510
Partner ( WE20)
LSMINCOM : (Partn.Type LS)
Outbound parmtrs.- Partner Role- LS, Message : ORDERS , Port - IDACLNT510
Inbound parmtrs.- Partner Role- LS, Message : INVOIC , Message Variant- MM, Process code u2013 INVL, Trigger immediately (Process code INVL have Identification - IDOC_INPUT_INVOIC_MRM, Option ALE u2013 Processing with ALE services , Processing type- processing by functional module)
Here PO Creation is working fine . IDoC of PO outbound message have below details :
Recipient information:
Port : IDACLNT510 (Logical system & Port created in WE21 )
Partner Number : LSMINCOM ( Logical system and Partner created in WE20)
Partn.Type : LS
Function : LS
Sender information:
Port : SAPEDA ( donu2019t know how it created..but in WE21..it is not there)
Partner number: EDACLNT112 ( Logical system and Partner created in WE20)
Partn.Type : LS
Partner Role :Blank
Just started testing, our PI team is sending the IDoC, with wrong information on partner & other data, so inbound IDoC failing with error u201CEDI: Partner profile not availableu201D. Oaky. I reprocessed these failed IDoCs by changing Partner data just opposite (i.e. Sender info as Recipient info & vice versa) to successful PO Creation O/B message in WE19 in EDIDC and when I click on u201CStandard Inboundu201D, then another window open giving error message u201CPartner profile not maintainedu201D and creates new IDoC with status 56
EDI: Partner profile inbound not availableMessage no. E0337
Diagnosis
An inbound partner profile could not be found with the following key:
/LSMINCOM/LS//INVOIC///X/
This involves the key fields of table EDP21:
-SNDPRN partner number of sender
-SNDPRT partner type of sender
-SNDPFC partner function of sender
-MESTYP logical message type
-MESCOD logical message code
-MESFCT logical message function
-TEST test flag
Procedure
Please check the inbound partner profiles.
Execute function
I am not getting exactly what inbound partner profile could not be found or what is the problem here . Can anyone suggest me what should be the problem and solution on it ?
Thanks
NAPNarendra,
Please advice what was the solution. -
File2Idoc - Error [EDI: Partner profile inbound not available]
Hi All,
I am executing file to Idoc Scenario, It is picking the file from sender & delivering to Idoc as well (fields) in R/3 system and showing chequered flag SXMB_MONI.
But If go to WE02 in R/3 : It is showing that Partner Profile not availbe , I have already mentioned in We20 - R/3 system.
EDI: Partner profile inbound not available
Diagnosis
An inbound partner profile could not be found with the following key:
I checked in Idoc - Control Segments - > It is shwoing Wrong recipient Partner No & Type
Recipient Information :-
Partner No - CLNT_300 Expecting 100008
Partner Type - LS Expecting LI
Where are to maintain these entries ?
Please do the needful.
Regards,
~AnshulSandeep,
I am using simple Idoc Delivery:-
Idoc:DELINF.DELVRY05 Messgae Type u2013 DELINF Process Code -- DELV
But I am getting error in R/3 - WE02
I checked in all entries in We20
EDI: Partner profile inbound not available
Message no. E0337
Diagnosis
An inbound partner profile could not be found with the following key:
/PEVCLNT100/LS//DELINF////
This involves the key fields of table EDP21:
-SNDPRN partner number of sender
-SNDPRT partner type of sender
-SNDPFC partner function of sender
-MESTYP logical message type
-MESCOD logical message code
-MESFCT logical message function
-TEST test flag
Thanks,
Anshul -
Error: "EDI: Partner profile inbound not available"
Hi All,
iam getting the following error while loading the FI related data.
"EDI: Partner profile inbound not available"
Suggestions are appreciated.
thanks
KiranHi,
Refer the link:
Re: EDI: Partner profile not active
With rgdS,
Anil Kumar Sharma .P -
Event 4776 Error Code: 0xC0000234 but account not actually locked out
I am coming across several instances where a user will get the error code 0xC0000234 for event 4776 and Failure Reason: Account Locked Out for event 4625 but the account never actually locks out. I cannot find a corresponding event 644 (windows 2003) or
4740 (Server 2008 and up) on any of our AD servers.
Any idea why this would register as an account being locked out, but not actually lock the account out?
Thanks!Hi,
Sounds a little weird to me.
Would you please check the account lockout policy, and post out the configured value for
Account lockout duration,
Account lockout threshold and Reset account lockout counter after?
More information for you:
Account Policy Settings
http://technet.microsoft.com/en-us/library/cc757692(v=WS.10).aspx
If the Account lockout duration and Reset account lockout counter after settings are set too low, the account will be unlocked very quickly after it’s locked.
Best Regards,
Amy -
Firefox Error with Roaming Profiles "Could not initialize the application's security component"
Hi there
I get the common error "Could not initialize the application's security component" when I startup Firefox.
I tried this manual: http://support.mozilla.org/en-US/kb/couldnt-initialize-applications-security-component
I have enough space left, i have read/edit/write-rights, created a new firefox profile and also reset all the settings, nothing works.
BUT I dont have a cert8.db File in my %APPDATA%\Mozilla\Firefox\Profiles
What can I do?
Like I said in my description, its about Users that are logged in with a Roaming-Profile. Every User has this problems, it doesn't matter if or without Admin-Rights.
Also this problem exists since Firefox 4.0.0, the last working Version was 3.6.13 I guess.You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
Try to remove or rename secmod.db (secmod.db.old) in the Firefox profile folder.
If that didn't help then also rename the cert8.db file to cert8.db.old or delete the cert8.db file to remove intermediate certificates that Firefox has stored.
If that helped to solve the problem then you can remove the renamed cert8.db.old file.<br />
Otherwise you can rename (or copy) the cert8.db.old file to cert8.db to restore the previous intermediate certificates.<br />
Firefox will automatically store intermediate certificates when you visit websites that send such a certificate.
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 25: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
Radio Button problem (not yet solved !!! --- Top Urgent )
In Forms 5.0,I have created a entry screen which consists a
radiogroup with 2 radio buttons. In new-form-instance trigger, I
have written: execute_query ;: last_record;
It shows me the last record but it shows my radio group with no
button selected.: If I go back to the previous record, it shows
me the record
with : one of the radio button selected.
My question is why it does not show radio button selected when my
when-new-form-instance trigger fires ?
Please note : Property palette of Radio Group & Radio buttons
have been correctly assigned .
nullShamsad Khan (guest) wrote:
: In Forms 5.0,I have created a entry screen which consists a
: radiogroup with 2 radio buttons. In new-form-instance trigger,
I
: have written: execute_query ;: last_record;
: It shows me the last record but it shows my radio group with no
: button selected.: If I go back to the previous record, it shows
: me the record
: with : one of the radio button selected.
: My question is why it does not show radio button selected when
my
: when-new-form-instance trigger fires ?
: Please note : Property palette of Radio Group & Radio buttons
: have been correctly assigned .
Shamsad Khan,
In Forms5.0, try setting Mapping of other values properties.
regards.
null -
How to solve the Embed Color Profile problem...
Hi Everyone,
This vijay from Chennai. I have one doubt for rectify the Embed color Profile problem, that's is how can i judges whether the file had Embed Color Profile or not. anyone solve this problem.
Thanks in Advance.
-yajivI used another profiles name, because I dont have the old one installed anymore, Youll have to be exact about the letters though.
And from a prepress-standpoint Id like to point out that removing the profile as opposed to »Convert to Profile« seems a peculiar practice, though of course Your reasons for doing so may be valid indeed.
You could try:
var myDocument = app.activeDocument;
if (myDocument.colorProfileName == "U.S. Web Coated (SWOP) v2") {
// =======================================================
var idassignProfile = stringIDToTypeID( "assignProfile" );
var desc2 = new ActionDescriptor();
var idnull = charIDToTypeID( "null" );
var ref1 = new ActionReference();
var idDcmn = charIDToTypeID( "Dcmn" );
var idOrdn = charIDToTypeID( "Ordn" );
var idTrgt = charIDToTypeID( "Trgt" );
ref1.putEnumerated( idDcmn, idOrdn, idTrgt );
desc2.putReference( idnull, ref1 );
var idmanage = stringIDToTypeID( "manage" );
desc2.putBoolean( idmanage, false );
executeAction( idassignProfile, desc2, DialogModes.NO );
else { -
The profile could not be added to the device.
Hi,
I have deployed multiple ipads in my company.
I have uploaded a profile with the iphone configuration utility on two ipads with no problem.
The third ipad returns this error message "The profile could not be added to the device."
I have tried resetting the ipad with no success.
I have seen an archived discussion that said :
"I had the same issue (and have already bugged it). I was able to restore function by deleting ~/Library/Caches and com.apple.iPhoneConfigurationUtility.plist. I also deleted the files in ~/Library/MobileDevice/Devices, which correspond to the iPhones I had connected to the iPCU...
Obviously, make sure iPCU is quit before following the above steps. Good Luck!"
I have tried locating the file but it doesn't exist.
Anyone out there knows how to fix this ?
Thanks !I had the same issue (and have already bugged it). I was able to restore function by deleting ~/Library/Caches and com.apple.iPhoneConfigurationUtility.plist. I also deleted the files in ~/Library/MobileDevice/Devices, which correspond to the iPhones I had connected to the iPCU...
Obviously, make sure iPCU is quit before following the above steps. Good Luck! -
EDI Parner profile Inbound not available
hi friends,
when i am posting in bound IDOC i am getting the error 'EDI: Partner profile inbound not available'.
what could be the problem with this error ?
please suggest me with correct solution .. appriciated as quick response.
According to the error i have done the changes in EDI partner profiles.
- Deepu.Hi,
Check your Inbound partner profile else.
Check the control record Parameter you are sending ,That may be mismatching with the inbound partner profile paramemeters.
Thanks! -
Profile 0SMD_PE not found
Hi SAP Patrons,
I am unable to retrieve the Workload analysis data for a solution manager system. When I checked the Extractor Framework, the workload analysis (introscope data) was in error and the error message is "Profile 0SMD_PE not found" in the dataloader phase. (please refer to the attached screen shot)
I am unable to find the infoube 0SMD_PE in RSA1 transaction however infocubes like 0SMD_PED1, 0SMD_PE2D, 0SMD_PRH... etc are available.
Can you please help me correct the error?
Thanks in advance.Hi,
make sure you completed solman_setup -> basis system configuration -> Configure automatically.
This actually creates all the needed cubes and data collection.
Thanks
Jansi -
EDI: Partner profile inbound not available - message variant
Hi Friends,
I am gettin error "EDI: Partner profile inbound not available" when sending message from XI to R/3 on R/3 side.
I checked to partner profile and it is correctly maintaind .
One thing I noticed is in the control record of that idoc,under typeinfo tab, message type is orders and message variant is ALW. I dont knw what this message vaeiant means,n where it came from, but when i process idoc in we19 by removing this message variant, its working properly..
give ur suggestions.
Thanks........Hi Kiran,
Check your Partner Profile Message Settings in we20.
[Error: "EDI: Partner profile inbound not available";
Regards,
RajeshKumar.D -
On Windows XP db service starts up but database is not actually started
Recently upgraded db from 10.1.0.4 to 10.2.0.1 in windows XP
The Windows service to start the database runs without error but the database is not actually started. When I connect as sys I get 'connected to idle instance' so i need to run 'startup' in sqlplus.
If that service isn't automatically started I can't even connect to the database as sysdba to start the db..
What do I need to do to get the service to actually start the DB? Before I upgraded to 10.2.0.1, the database started once that service was run..In your registry editor, under HKLM\SOFTWARE\ORACLE
look for an entry ORA_<database_sid>_AUTOSTART for your oracle home sub-tree. If it is set to FALSE, set it to TRUE. -
I pasted the statement into my form and it didn't have anymore syntax errors but now it is not actually creating the code. i type in the name and a phone number but nothing is happening?
If you need anymore info please ask. I'm not sure what else to post to help.I am trying to Take the first letter from the Company Name/Customer Name and the last 4 digits from the customers phone number. add them together to create our customer code. IE, my name is sam and the last 4 digits of my number are 6770 so my customer code would be S6770.
here is the code that is under the text field i am trying to use.
form1.#subform[0].CustCode::initialize - (FormCalc, client)
Concat(Left(CustName,1) , Right(TextField9,4))
Heirachy:
form1
-master page
-page 1
-(untitiled content area)
-(untitled subform) (page 1)
-rectangle1
-text6
-CUst.Type
-CustName
-SHip.Via
-CustCode
-TextField8[0]
-Text23[0]
-Text24[0]
-Text25[0]
-TextField8[1]
-Text23[1]
-Text24[1]
-Text25[1]
-CHeckBox2
-Text26[0]
-Text27[0]
-TextFIeld9[0]
-Line4[0]
-Text26[1]
-CHeckBox3[0]
-Text27[1]
-Line4[1]
-Text27[2]
-CHeckBox3[1]
-Text26[2]
-POReq
-Text22
-OfficeUseOnly
-Text29
-Text13[0]
-PrintState
-Text13[1]
-interest
-terms
-CreditLimit
-PriceMatrix
-DropdownList1
-TextFIeld11[0]
-CHeckBox1[0]
-CheckBox1[1]
-Text15
-TextField11[1]
-DropDOwnList5
-Deafult.Loc
-Text28
-Text15
-CHeckBox1[0]
-CHeckBox1[1]
-TextField10[0]
-TextField10[1]
-TextField10[2]
-TextField10[3]
-TextField10[4]
-TextField10[5]
-TextField10[0]
-TextField9[0]
-TextField9[1]
-TextField9[2]
-TextField9[3]
-TextField9[4]
-TextField9[5]
-TextField9[6]
-TextField9[7]
-TextField9[8]
-TextField9[9]
-TextField9[10]
-TextField9[11]
-TextField9[12]
Here is a picture of the form i am trying to make. -
When I start the Mozilla Firefox I get error message "ReferenceError: Globalstorage is not defined." How to solve this problem?
-VinayakDisabling Samsung Caster add-on solved this issue for me.
Maybe you are looking for
-
MacBook pro does not recognize my WD external hard drive anymore
I use TIme Machine on my WD external hard drive. Everything was working great up until about a month ago. My MacBook Pro does not recognize my external hard drive anymore...I have done nothing differently than usual. I did search in previous discussi
-
Hp Laserjet toolbox not loading
I have a Laserjet p2015 running on a Mac with os 10.5.8, and I cannot get drivers to include the toolbox, or anything to give me better than standard printing resolution. The printer is supposed to support 1200dpi but the only option I get is 300 or
-
Macbook Pro WD Firewire 800 issues possible work around
I have been having issues with my Western Digital My Passport Studio and the Firewire 800 connection. The drive would mount and was completly readable however copying to the drive would result in a stall. The USB connection worked perfect. I have fou
-
I want to buy Oracle 10g Standard Edition One for a my software that is to be installed in a big government department. The database will reside in one or two servers and the client part will run on more than 30 nodes. I want to know whether Standard
-
i have my contacts in csv format.how it convert to vcf?