Errors druing Data Transfer process
Hello!
I go through the SAP BW example and have the following error by generating Data Transfer process.
I have corrected the errors (from "EURO" to "EUR") in CSV-files, but I get still the errors:
No SID found for value 'EURO ' of characteristic 0CURRENCY
No SID found for value 'U1 ' of characteristic 0UNIT
I have recreated the flat files/.csv-files, deleted and created the info cube, but the error still occurs.
What are the steps to fix the error?
How can I know which data source contains the error?
What are the possible values for 0CURRENCY and 0UNIT?
Can some one give some recommendation?
Thank you very much!
rergards
Thom
Hello,
You need to delete the data from PSA after an Unsuccessful load, if you want to load it again after correcting data in the source (Flat file in ur case). Right click ur datasource->Manage. Select the request which failed and hit the delete button (trash) at bottom. Now try loading it again.
To get all possible values of currencies and units defined in your system. check contents of following tables:
TCURC - Currency Codes (field -WAERS)
T006 - Units of Measurement (field - MSEHI)
Thanks
Similar Messages
-
Error in Data Transfer Process (DTP) Urgent!
Hi,
ive encountered an error in uploading data from R3 using DTP in a specific cube and it says "Exceptions in Subset: Load and Generation" and "Dump: ABAP/4 processor: MESSAGE_TYPE_X", how can i fix this problem? is there any problem with the upgrade process of our system or in KERNEL? and what is KERNEL? Please help me guys.....
Thanks,
nipsPlease do not post the same question twice.
Error in Data Transfer Process (DTP) Urgent! -
Errors in data transfer process
Hi,
i'm getting "Errors in data transfer process" message when i try to run conntrans. when i see the detials error log in trouble shooting ( in client console), i get this following message in detials ( see the bold letters). can some one help me. i have check all the connections between mobile and CRM server. will reward points!!!
2324 96c ! Entering 'PullMessages' for queue 'CRM_SITE_000000000000274' / limit 20 messages
2324 96c Fri Aug 24 20:28:22 2007 E
NewTransferService - _TransferPullMessages : <b>DotNet Stub.TransferPullMessages call failed with fffffffa:</b>(null)
2324 96c E
_TransferPullMessages failed with fffffffa
2324 96c Fri Aug 24 20:28:23 2007 E
regards
Kamalesh K.VHi,
We have installed MSA 4.0 (SP12 ). we have also checked QMT config in Mobile sales bin folder. The test connection is sucessfull.( see the below message). we stil have problems in Data transfer when we run connstrans. Please help .
<b>" NewQmtCnfg Version 2.0 for Windows 2000 - revision 4003
Assume running on Client
1. Try to access Communication Station 'MTV01sdCR02', please wait...
... OK
Try QmtServer component initialize check, please wait...
...OK: QmtServer initialize call returns successfully
2. Try to access CRM Server (Destination '<DEFAULT>'), please wait...
...OK: CRM Server call returns successfully</b>
regards
Kamalesh KV -
Error in data transfer process
Hi,
Can any one tell me whats the cause of error coming in DTP's process and that too in HEADER tab?It shows red in technical status although data is loaded in the target.
Regards,
SanyuktaHi Sanyakta,
if the status is red there is error in loading , you will not be able to view your data in datatargets
when there is an error it usally comes in all the tabs, header details ad status tabs
You check the detail tab for furthur analysis.
For error there may be a lot of reasons
Cheers
Sunil -
Error in Data Transfer Process (DTP)
Hi,
ive encountered an error in uploading data from R3 using DTP in a specific cube and it says "Exceptions in Subset: Load and Generation" and "Dump: ABAP/4 processor: MESSAGE_TYPE_X", how can i fix this problem? is there any problem with the upgrade process of our system or in KERNEL? and what is KERNEL?
Thanks,
nipsHi
It looks like a Memory issue. Try restarting the load when the system is relatively free.
Regardss,
Namrata -
Issues in Data Transfer Process
Hello All,
After creating transformation from Infosource to InfoCube, now i am trying to data transfer process.
In DTP Type it displays "DTP for direct process", but i need DTP type as Standard(Can be scheduled).
Its giving me an error as "Source does not support direct access"
Could any one help me to solve this error.
Thanks in advance
Regards,
NithinHi,
You can only use the type DTP for Direct Access as the target of the data transfer process for a VirtualProvider.
Check the below links
http://help.sap.com/saphelp_nw04s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/42/fb8ed8481e1a61e10000000a422035/frameset.htm
Regards
KP
Edited by: prashanthk on Jan 19, 2011 5:15 PM -
Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required
Dear SAP Expert:
I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
Please suggest me how to fix that kind of issue.
"com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
at SAPAdapter.execute(Unknown Source)
at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
at JavaAgent.NotesMain(Unknown Source)
at lotus.domino.AgentBase.runNotes(Unknown Source)
at lotus.domino.NotesThread.run(NotesThread.java:249)
Thanks in advance! Your help would be highly appreciated! Thanks again!error is clear, check your abap code.
-
Transporting of Data Transfer Processes fails
Hi to you all!
Ive a problem when transporting DTPs
Always the import of a DTP fails in the after-import method RS_DTPA_AFTER_IMPORT with the same error message.
At the step Post Processing/Checking the Activation for Data Transfer Process <name of DTP> the following error occurs:
<b>
PSA table name was blank
**** Error from PSA ****
Error when activating Data Transfer Process
</b>
So I built a test case with a simple DTP.
First I successfully transported a simple InfoObject as the source of the DTP.
Then I successfully transported a simple DataStore-Object as the target of the DTP.
Next I successfully transported the transformation of the DTP.
The transport of a DTP still fails with the error message mentioned above.
Ive no idea what the error message what to tell me
Any suggestions?
Thanks
Kai
PS: I' currently working SP09...Steps you followed seems to be correct
You may wish to check OSS Note 1020231 - 70SP13: UNCAUGHT_EXCEPTION in after import
Hope it Helps
Chetan
@CP.. -
Activation of Objects with Type Data Transfer Process
Hi Experts,
I am stuck in a problem of activation of DTP. I loaded the data from the Datasource to PSA and there are about 200,000 reocrds.
Now I wanted to take this load to DSO NEW table ..I have created a DTP and when I try to activate the DTP I get this Error
Activation of Objects with Type Data Transfer Process
Internal Activation (Data Transfer Process )
Post Processing/Checking the Activation for Data Transfer Process DTP_49Z7OSAHFAR9O8335ED6
Error when activating Data Transfer Process DTP_49Z7OSAHFAR9O8335ED67X11C.
I tried to activate the Data source but it still didnt help. Looked in SDN for some related stuff but most of them are talking about going for SP 11 ..we are already on
*SAP_BW 700 SAPKW70014 *
Your suggestion will be appreciated with maximum points
ThanksHello Experts,
Could you'll please help me out with this ...I
I deleted the DTP and created back again
logged out of BW and logged back again
Infact I found a SAP note 1086877 and i applied it ..but it still didint help
Whie loading the Master Data from PSA to DTP ..it worked fine.
While Loading the transactrion data I went to Tcode RSBATCH and in the drop down I selected the DTP activation and gave a 3 Back ground processes....Ever since that it started giving me problem
Your help will be appreciated...my data loads are stalled ..i mean I cant move forward.
Thanks -
Problems when creating data transfer process for 0EC_CPLAN (Compensation )
Hi experts,
I have the infoobject 0EC_CPLAN (Compensation Plan) Active in my BW sistem.
I tri to create data transfer process for text and atributtes for it, but when i do this i get a "Target 0EC_CPLAN (Type IOBJA) is not active" error message.
When i double-click on the texts or attributes i recive an "Administration function is not possible for this InfoObject" information message and i can not active or edit it.
What could this be? I am breaking my brain.
Thank you all!Debugging i have seen this:
15 CALL FUNCTION 'RSD_IOBJ_GET'
16 EXPORTING
17 i_iobjnm = l_iobjnm
18 i_objvers = rs_c_objvers-active
19 i_bypass_buffer = rs_c_false
20 IMPORTING
21 e_s_vcha = l_s_vcha
22 EXCEPTIONS
23 iobj_not_found = 1
24 illegal_input = 2
25 bct_comp_invalid = 3
26 OTHERS = 4.
27 IF sy-subrc <> 0 OR l_s_vcha-infoarea IS INITIAL.
28 MESSAGE i025(rsawbn).
l_s_vcha-infoarea is Initial.
Dues this mean that the object has no-infoarea??? In infoprovider i is under "enterprise compensation management" Does it give you a clue?
Thanks! -
Is there any documentation for filter routine in Data Transfer Process?
I am trying to create a filter routine in the Data Transfer Process to select different billing types depending on what date the Data Transfer Process is running....
I have searched through SDN and found some examples, but some formal documentation would help.
Is there any documention on filtering in a Data Transfer Process using a routine?
I am in 7.0data: l_dow TYPE I,
L_S_RANGE TYPE rssdlrange.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'F2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'G2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'L2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCDD'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCDI'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCR1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCR2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZDR1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZEDI'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZMD'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZRE'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZRE1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZRED'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZSMP'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZUSD'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZUSI'.
APPEND L_S_RANGE TO l_t_range.
CALL FUNCTION 'DATE_COMPUTE_DAY'
EXPORTING
date = sy-datum
IMPORTING
day = L_DOW.
IF l_Dow EQ 5.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'S1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'S2'.
APPEND L_S_RANGE TO l_t_range.
ENDIF. -
Hi,
I am having problems with a data transfer process, i am getting the message:
Extraction datasource Z_WMS_VRM
Prepare for extraction
Exceptions in Substep: Extraction Completed
Processing terminated
When I click the button behind "Exceptions in Substep" it jumps to a line with
CALL METHOD cl_rsbm_log_step=>raise_step_failed_callstack
in method IF_RSBK_CMD_X~GET_DATAPACKAGE.
When I look in the PSA(13 records) it all looks ok, no weird values. De infopackage runs ok and fills the PSA. Screenshot of PSA contents: http://i44.tinypic.com/sesqw2.jpg
The datasource is an external DS filled by powerexchange 4.
The system's current support pack is 18.
Edited by: Thijs de Jong on Jun 23, 2009 12:00 PM
Edited by: Thijs de Jong on Jun 23, 2009 12:11 PMHello Thijs,
The same issue happened to me this week. This can happen for several reasons:
- Some parts of the loading line is not active, resp. structures were changed and need to be activated again.
- There is no more tablespace in the DB.
- There is a deadlock when reading a table (maybe the table is too big...)
Hope this helps.
Cheers,
Stephan -
Data Transfer Process and Delete Overlapping Requests
Hi All,
We are on BW 7.0 (Netweaver 2004s). We are using the new data transfer processing and transformation. We want to use the ability to delete overlapping requests from a cube in a process chain. So lets say we have a full load from an R/3 system with fiscal year 2007 in the selection using an infopackage. It gets loaded to the PSA. From there we execute the data transfer process and load it to the cube. We then execute the delete overlapping requests functionality. My question is, will the DTP know that the infopackage selection was 2007 so it will only delete requests with selections of 2007 and not 2006 from the cube? Basically, is the DTP aware of the selections that were made in the infopackage?
Thanks,
ScottHi Everyone,
Figure it out...on a data transfer process you can filter the selection criteria - go to the extraction tab of a DTP and click on the filter icon. Enter your seleciton conditions to pull from the PSA....these seleciton conditions will be used to delete the overlapping requests from the cube.
Thanks -
What is the "Data Transfer Process" in the BI7.0, and how does it work?
Hi, experts !
I'm fresh on BI7.0.
What is the "Data Transfer Process" in the BI7.0, and how does it work?
And what is it used for ?
Could anyone help me? Plz send me some doc.
[email protected]
Thank u !HI,
Refer this blog
/people/community.user/blog/2007/06/22/sap-netweaver-70-bi-data-transfer-process-dtp-blog-series
Also refer
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Thanks -
Data Transfer Process filter: how to view the filter values?
Hi,
does anyone know how to view (and download) the values of a filter of data transfer processes?
I want to compare the filtervalues of data transfer processes from productive system with development system. Normally the DTP's are created in a development system and transported with TMS to quality and productive systems. In the productive system there is often the need to slightly change the values in the filter, and to do this directly in the productive system without transport.
If the same DTP is used and changed by another project after a while, it will overwrite the changes from productive maintenance.
By comparing the filter values one could evaluate the changes.
For info packages there is the same need. Here you can use table RSLDPSEL. Is there someting like that for DTP?
thanks for any help
JeanHi,
the difference you have in the infopack and DTP is
you can have any number of infopackages between the source and PSA but you can have only one DTP between the PSA and datatarget.
so there is no othere way than changing the filter values in the existing DTP.
just chk the filter option and choose the required chars for ur load and activate the DTP.
Ramesh
Maybe you are looking for
-
I can not get on Safari. I see things like Exception type EXC_BAD_ACCESS (SIGSEGV) Thread creation by external task. The computer is less than 6 months ol and has nothing i cant live without. Can i do a factory reset or something similiar
-
Itunes does not detect my new iphone 5
My brand new iphone 5 is not recognized by either windows or itunes? Any ideas? Sorry . . . Yes. I did already update to latest itunes.
-
Export and Import PST corrupting mailbox folder structure
Hi, I have an old Exchange 2003 mailserver which I am replacing with Exchange 2013 server. I am doing a fresh install in a new domain and will import the old mailboxes (5) via PST's. I have exported the mail from Exchange 2003 using exmerge to PST fi
-
Latest openoffice won't open WordPerfect frm files
Not sure if this is an openoffice issue or arch/package issue. Previously with openoffice-base (3.2.1-3) I was able to open WordPerfect frm files. Yesterday I upgraded to 3.2.1-4 and I can no longer open the .frm files. Interestingly if I downgrad
-
Avoid labview initial window to show up when running a sequence
Hi, I'm running a testand sequence that calls labview Vi's (not exe not dll) and right when it starts running the main start labview window shows up right in front of testand. I mean the window that appears when you open labview. How can I avoid this