Errors during Data loads

Hi,
Our end users are preparing their scripts for UAT and I have been asked to provide a list of data errors which they might need to test during UAT.
Can someone please help me in this. This is very urgent!!!
Thanks,
RPK.
Message was edited by:
RPK

HI,
1.No IDocs could be sent to the SAP BW using RFC.
2.IDocs were found in the ALE inbox for Source System that are not
Updated. Processing is overdue
5.1st That it is a PC File Source System.
2nd - That there are Duplicate Data Records leading to error.
7.1st That it is a PC File Source System.
2nd For uploading data from the PC File it seems that the file was not kept at the application server & the job was scheduled in Background
8.The background processing was not finished in the source system.
It is possible that the background processing in the source system was terminated.System response .There are incomplete data packets present
9.After looking at all the above error messages we find that if we want to load data with the delta update you must first initialize the delta process.
10.Here we can see that the Activation of ODS has failed as the Request Status in the ODS may not be green.
13.While Fiscal year is mostly the financial year and varies depending upon the Client using which Fiscal year Variant. Client may consider April is the start month of year (financial) .So this can be achieved by defining the fiscal year.One client can have different fiscal year definations with different Fiscal varients.So Fiscal variants differ the starting and ending of fiscal year.
For example in India we follow Fiscal year from April to March. You can have a look at the Fiscal year Variant and the periods in transaction OB29
14.Due to space problem these types of errors occurs

Similar Messages

Segmentation fault error during data load in parallel with multiple rules

Hi,
I'm trying to do sql data load in parallel with multiple rules (4 or 5 rules, maybe), i'm getting a "segmentation fault" error. I tested 3 rules file and it worked fine. we're using Essbase system 9.3.2., with UDB (v8) as the sql data source. ODBC driver is DataDirect 5.2 DB2 Wire Protocol Driver (ARdb222). Please let me know if you have any information on this.
thx.
Y

Hi Thad,
I was wondering, if system is unicode or non unicode that should not matter the amount and currency field . As currencies are defined by SAP and it is in pure English at least a currency code part of 3 Chars.
Could this because of some incosistency of data ??
I would like to know for Which currency had some special characters it it in that particular record ??
Hope that helps.
Regards
Mr Kapadia

Maxl Error during data load - file size limit?

Does anyone know if there is a file size limit while importingdata into an ASO cube via Maxl. I have tried to execute: Import Database TST_ASO.J_ASO_DB datausing server test data file '/XX/xXX/XXX.txt'using server rules_file '/XXX/XXX/XXX.rul'to load_buffer with buffer_id 1on error write to '/XXX.log'; It errors out after about 10 minutes and gives "unexpectedEssbase error 1130610' The file is about 1.5 gigs of data. The filelocation is right. I have tried the same code with a smaller fileand it works. Do I need to increase my cache or anything? I alsogot "DATAERRORLIMIT' reached and I can not find the log filefor this...? Thanks!

Have you looked in the data error log to see what kind of errors you are getting. The odds are high that you are trying to load data into calculated memebers (or upper level memebers) resulting in errors. It is most likely the former. you specify the error file with the on error write to '/XXX.log'; statement. Have you looked for this file to find why you are getting errors? Do yourself a favor, load the smaller file and look for the error file to see what kind of an error you are getting. It is possible that you error file is larger than your load file, since multiple errors on a single load item may result in a restatement of the entire load line for each error. This is a starting point for your exploration into the problem. DATAERRORLIMIT is set at the config file, default at 1000, max at 65000. NOMSGLOGGINGONDATAERRORLIMIT if set to true, just stops logging and continues the load when the data error limit is reached. I'd advise using this only in atest environement since it doesn't solve the initial problem of data errors. Probably what you'll have to do is ignore some of the columns in the data load that load into calculated fields. If you have some upper level memebers, you could put them in skip loading condition. let us know what works for you.

Error during data load due to special characters in source data

Hi Experts,
We are trying to load Billing data into the BW using the billing item datasource. It seems that there are some special characters in the source data. When the record with these characters is encountered, the request turns red and the package is not loaded even into the PSA. The error we get in the monitor is something like
'RECORD 5028: Contents from field **** cannot be converted into type CURR',
where the field **** is a key figure of type currency. We managed to identify the said record in RSA3 on the source system and found that one of the fields contains some invalid (special) characters that show up as squares in RSA3. The data in the rest of the fields, including the fields mentioned in the error looks correct.
Our source system is a non-unicode system wheras the BW system is unicode enabled. I figure that the data in the rest of the fields are getting misaligned due to the presence of the invalid characters in the above field. This was confirmed when we unassigned the field with the special characters from the transfer rules and removed the source field from the transfer structure. After doing this the data was loaded successfully and the request turned green.
Can anyone suggest a way to either filter out such invalid characters from the source data or make some settings in the BW systems such that the special characters are no longer invalid in the BW system? We cannot write code in the transfer rules because the data package does not even come into the PSA. Is there any other method to solve this problem?
Regards,
Ted

Hi Thad,
I was wondering, if system is unicode or non unicode that should not matter the amount and currency field . As currencies are defined by SAP and it is in pure English at least a currency code part of 3 Chars.
Could this because of some incosistency of data ??
I would like to know for Which currency had some special characters it it in that particular record ??
Hope that helps.
Regards
Mr Kapadia

Facing TIME OUT error during data load extraction

The program "SAPLSENA" has exceeded the maximum permitted runtime without
interruption and has therefore been terminated.
Can someone help me with the solution please?

Hi Sai,
IT looks like you are running the program in foreground and execution takes more time than the value specified under profile parameter rdisp/max_wprun_time.
Check whether you can execute the same in background.
If not then increase the value of parameter rdisp/max_wprun_time . Take SAP restart and test again.
Hope this helps.
Regards,
Deepak Kori

Error while data loading

Hi Gurus,
I am getting error while data loading. At BI side when I check the error it says Background Job Cancelled and when I check in R3 side I got the following error
Job started
Step 001 started (program SBIE0001, variant &0000000065503, user ID R3REMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 2LIS_11_V_ITM
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 2000683008                              *
abap/heap_area_total.......... 4000317440                              *
abap/heaplimit................ 40894464                                *
zcsa/installed_languages...... ED                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 6500352                                 *
ztta/roll_extension........... 3001024512                              *
4 LUWs confirmed and 4 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
ABAP/4 processor: DBIF_RSQL_SQL_ERROR
Job cancelled
Please help me out what should I do.
Regards,
Mayank

Hi Mayank,
The log says it went to short dump due to temp space issue.as its the source system job ,check in the source system side for temp table space and also check at the BI side as well.
Check with your basis regarding the TEMP PSA table space - if its out of space ask them to increase the table space and try to repeat the load.
Check the below note
Note 796422 - DBIF_RSQL_SQL_ERROR during deletion of table BWFI_AEDAT
Regards
KP
Edited by: prashanthk on Jul 19, 2010 10:42 AM

How to debug a transfer rule during data load?

I am conducting a flat file (excel sheet saved as a CSV file) data load. The flat file contains a date field and the value is '12/18/1988'. In transfer rule for this field, I use a function call to transfer this value to '19881218' which corresponds to BW DATS format, but the monitor of the InfoPackage shows red error:
"Value '1981218' of characteristic 0DATE is not a number with 000008 spaces".
Somehow, the last digit or character of the year 1988 was cut and the year grabbed is 198 other than 1988. The function code is (see below in between two * lines):
FUNCTION ZDM_CONVERT_DATE.
""Local Interface:
*" IMPORTING
*"     REFERENCE(CHARDATE) TYPE STRING
*" EXPORTING
*"     REFERENCE(DATE) TYPE D
DATA:
c_date(2) TYPE c,
c_month(2) TYPE c,
c_year(4) TYPE c,
c_date_combined(8) TYPE c.
data: text(10).
text = chardate.
search text for '/'.
if sy-fdpos = 1.
concatenate '0' text into text.
endif.
c_month = text(2).
c_date = text+3(2).
c_year = text+6(4).
CONCATENATE c_year c_month c_date INTO c_date_combined.
date = c_date_combined.
ENDFUNCTION.
Could experts here tell me what's wrong and also tell me on how to debug a transfer rule during data load?
Thanks

hey Bhanu/AHP,
I find the reason. Originally, I set the character length for the date InfoObject ZCHARDAT1 to 9, then I find the date field value (12/18/1988)length is 10. Then I modified the InfoObject ZCHARDAT1 length from 9 to 10 and activated it already. But when defining the transfer rule for this field, before the code screen, click the radio button "Selected Fields" and pick the filed /BIC/ZCHARDAT1, then continue to go to the transfer rule code screen, but find the declaration lines for the infoObject /BIC/ZCHARDAT1 is as following:
InfoObject ZCHARDAT1: CHAR - 000009
    /BIC/ZCHARDAT1(000009) TYPE C,
That means even if I've modified the length to 10 for the InfoObject and activated it, but somehow the transfer rule code screen always takes the old length 9. Any idea to have it fixed to take the length 10 in the transfer rule code screen defination?
Thanks

Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required

Dear SAP Expert:
I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
Please suggest me how to fix that kind of issue.
"com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
at SAPAdapter.execute(Unknown Source)
at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
at JavaAgent.NotesMain(Unknown Source)
at lotus.domino.AgentBase.runNotes(Unknown Source)
at lotus.domino.NotesThread.run(NotesThread.java:249)
Thanks in advance! Your help would be highly appreciated! Thanks again!

error is clear, check your abap code.

Number of parallel process definition during data load from R/3 to BI

Dear Friends,
We are using Bi7.00. We have a requirement in which i should increase the number of parallel process during data load from R/3 to BI. I want to modify this for a particular data source and check.Can experts provide helpful answers for the following question.
1) When load is taking place or have taken place, where can we see how many parallel process that particular load has taken.
2) Where should i change the setting for the number of parallel process for data load (from R/3 to BI) and not within BI.
3) How system works and what will be net result of increasing or decreasing the number of parallel process.
Expecting Experts help.
Regards,
M.M

Dear Des Gallagher,
Thank you very much for the useful information provided. The following was my observation.
From the posts in this forum, i was given to understand that the setting for specific data source can be done in the infopackage and DTP level, i carried out the same and found that there is no change in the load, i.e., system by default takes only one parallel process even though i maintained 6.
Can you kindly explain about the above mentioned point. i.e.,
1) Even though the value is maintained in the infopackage level , will system consider it or not. -> if not then from which transaction system is able to derive the 1 parallel process.
Actually we wanted to increase the package size but we failed because i could not understand what values have to be maintained -> can you explain in detail
Can you calrify my doubt and provide solution?
Regards,
M.M

Error during date calculation: Time entered not numerical

Hi All,
We are using SAP MI 7.0 SP18 Server and Client
xMAM 3.0 SR06
Now when we create a Notification using the link Notification Management of type PV and SAVE.
When Synchronized, it is completed but backend no notification is trigerring and when checked in Error Logs
the following message is shown Error during date calculation: Time entered not numerical
Kindly Suggest
Regards,
Kiran Joshua

Hi All,
I got to know how to edit the entries from merep_mon : Thanks to Chinna.
But unfortunately that did not solve my problem
I had to debug the function module of the respective SyncBO and found that the Profile type was not maintained in the backend.
Infact the error "Error during date calculation: Time entered not numerical" was misleading.
Anyways upon customising the Profile for the PJ and PV type Notifications that solved my issue.
Regards,
Kiran Joshua

Common errors in Data Loading

Can anybody tell me what are the common error we come across in BW/BI for following:-
1] Data Loading in Infocube/ODS/DSO
2] Aggregates
3] PSA
4] DTP
5] Transformations
Thanks in advance

Hi,
Here are the list of common issues we face while data loading in to BW:
Data Loading in Infocube/ODS/DSO:
1) Missing SID issue or missing master data
2) Data load cancelled becasue of various exceptions. Eg: Message Type 'x', DBIF SQL Error,
3) Data records found in duplicate
4) Alpha Confirming Vaue error
5) Invalid time interval
6) Time overlap error
7) Job Cancelled in source system
8) RFC Connection Error
9) Data Source Replication error
10) Data load locked by active change run
11) Attributes to target by user 'xyz'
12) Job cancelled as the previous load is still running
13) Target locked by a change run
(Some times data loads dont fail but run for long time then usual with out any progess, because of struck tRFCs in source sytem, source sytem performance is poor and the job is in release state for long time, etc...)
Aggregate Rollups:
1) Nofilled aaggregates available, rollup not possible
2) Rollup locked by active change run
3) Job cancelled because of various exceptions
PSA Updations:
1) Job cancelled because of various exception
2) Missing SID value
ODS Activaitons:
1) Request to be activate shoud be green - (Loading of data in to ODS in still going on)
2) Key exists in duplicate
3) Job cancelled because of various exceptions (Short Dumps)
Attribue Change Run:
1) Locked by a rollup
2) Job cancelled because of various exceptions
3) Locked by another change run
Hope it helps....
Cheers,
Habeeb

Essbase Error(1003050): Data Load Transaction Aborted With Error (1220000)

Hi
We are using 10.1.3.6, and got the following error for just one of the thousands of transactions last night.
cannot end dataload. Essbase Error(1003050): Data Load Transaction Aborted With Error (1220000)
The data seems to have loaded, regardless of the error. Should we be concerned, and does this suggest something is not right somewhere?
Your assistance is appreciated.
Cheers

Hi John
Not using a load rule.
There were two other records which rejected based on absentee members. The error message was different for them, and easily fixed.
But this error doesn't tell us much. I will monitor the next run to see if the problem persists.
Thanks

Error during database load in ECC 5.0

Hello All,
i am trying to install ECC.5 with oracle 10g during database load phase he is giving me a error when i saw in log file i found this.
C:\usr\sap\EPT\SYS\exe\run/R3load.exe: START OF LOG: 20090611085559
C:\usr\sap\EPT\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\EPT\SYS\exe\run/R3load.exe: version R6.40/V1.4
C:\usr\sap\EPT\SYS\exe\run/R3load.exe -ctf I E:/sap5/51031332_1/EXP1/DATA/SAP0000.STR C:\Program Files\sapinst_instdir\ECC50\SYSTEM\ABAP\ORA\NUC\DB/DDLORA.TPL C:\Program Files\sapinst_instdir\ECC50\SYSTEM\ABAP\ORA\NUC\DB/SAP0000.TSK ORA -l C:\Program Files\sapinst_instdir\ECC50\SYSTEM\ABAP\ORA\NUC\DB/SAP0000.log -o D
C:\usr\sap\EPT\SYS\exe\run/R3load.exe: job completed
C:\usr\sap\EPT\SYS\exe\run/R3load.exe: END OF LOG: 20090611085559
C:\usr\sap\EPT\SYS\exe\run/R3load.exe: START OF LOG: 20090611103425
C:\usr\sap\EPT\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\EPT\SYS\exe\run/R3load.exe: version R6.40/V1.4
C:\usr\sap\EPT\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\ECC50\SYSTEM\ABAP\ORA\NUC\DB/SAP0000.cmd -l C:\Program Files\sapinst_instdir\ECC50\SYSTEM\ABAP\ORA\NUC\DB/SAP0000.log -stop_on_error
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed: rc = 1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
C:\usr\sap\EPT\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\EPT\SYS\exe\run/R3load.exe: END OF LOG: 20090611103428
can anybody help me to sort this out.
Any help highly appreciated.
Thanks & Regards
Subhash

First of all thanks for helping me
i have tried this
Connected to an idle instance.
SQL> STARTUP MOUNT
ORACLE instance started.
Total System Global Area 205520896 bytes
Fixed Size                  1248116 bytes
Variable Size             117441676 bytes
Database Buffers           83886080 bytes
Redo Buffers                2945024 bytes
Database mounted.
SQL> SET AUTORECOVERY ON
SQL> RECOVER DATABASE
ORA-00279: change 262364 generated at 06/11/2009 09:43:56 needed for thread 1
ORA-00289: suggestion : C:\ORACLE\EPT\ORAARCH\EPTARCHARC00052_0689209324.001
ORA-00280: change 262364 for thread 1 is in sequence #52
ORA-00308: cannot open archived log
'C:\ORACLE\EPT\ORAARCH\EPTARCHARC00052_0689209324.001'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
But i m not able to see any archive file on oraarch folder
Regards
Subhash

Strange Error During Page Load in Debug Mode (only) - Please Help!

Hi All,
Data base version: oracle 11g
Apex version: Apex 4.1.1
Webserver: Apache
Need help with how to troubleshoot a Critical problem. The following error only occurs during page load in "Debug" mode. And, only occurs on a specific page within the application. A web page is served-up containing the following message and the application is blocked from running the page. The browser's (IE 8.0) back button must be clicked to proceed outside of "Debug" mode.
"Error occurred while painting error page: ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06502: PL/SQL: numeric or value error: character string buffer too small"
Debug log follows:
"S H O W: application="2006" page="6" workspace="" request="" session="500549669426301"
Computation point: Before Header
...Perform computation of item: APP_SERVER, type=FUNCTION_BODY
...Performing function body computation
...Execute Statement: declare function x return varchar2 is begin return owa_util.get_cgi_env('SERVER_NAME'); return null; end; begin wwv_flow.g_computation_result_vc := x; end;
......Result = 156.9.122.214
...Session State: Save "APP_SERVER" - saving same value: "156.9.122.214"
Processes - point: BEFORE_HEADER
...Process "GET_POSITION" - Type: PLSQL
...Execute Statement: begin wwv_flow.g_boolean := :F109_POSITION_ID IS NULL and :APP_PAGE_ID != 101; end;
......Result = FALSE
......Skip because condition or authorization evaluates to FALSE
...Process "Get JARS Sifter Log File Record Count" - Type: PLSQL
...Execute Statement: begin DECLARE vcnt NUMBER := 0; BEGIN d('Get JARS Sifter Log File Record Count'); Select count(*) into vcnt From JARS.JARS_SIFTER_LOG Where moveid = to_number(:P6_MOVEID) and sifter_status IN ('F','J'); :F1000_P6_SIFTER_LOG_COUNT := to_char(vcnt); END; end;
Custom: Get JARS Sifter Log File Record Count
...Process "Set PTM Planned Trip Status" - Type: PLSQL
......Skip because condition or authorization evaluates to FALSE
...compatibility mode - do not set mime type
...compatibility mode - do not set additional http headers
...close http header
...metadata, fetch item type settings
...metadata, fetch items
Show page template header
Rendering form open tag and internal values
Add error onto error stack
...Error data:
......message: Error processing request.
......additional_info: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
......display_location: ON_ERROR_PAGE
......is_internal_error: true
......apex_error_code: APEX.UNHANDLED_ERROR
......ora_sqlcode: -6502
......ora_sqlerrm: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
......error_backtrace: ORA-06512: at "APEX_040100.WWV_FLOW", line 3027 ORA-06512: at "APEX_040100.WWV_FLOW", line 7867
...Show Error on Error Page
......Performing rollback
Rendering form open tag and internal values
...Unhandled Error while painting error page: ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06502: PL/SQL: numeric or value error: character string buffer too small
...Error Backtrace: ORA-06512: at "APEX_040100.WWV_FLOW", line 2707 ORA-06512: at "APEX_040100.WWV_FLOW_ERROR", line 185
End Page Rendering"
Thanks!
Bernard

All,
It appears that the page Javascript maximum limit size was reached. The error stopped appearing after some of the page Javascript code was removed out to Application Static Files. I wonder if there exists any "direct" indicator by the system whenever the size limit has been reached?
Again, the run error only occurred when the page was loaded in "Debug" mode.
Bernard

Errors in data loading & BEx reporting.........,

Hi all,
should i know that what are the possible erros occur in data extraction & reporting .....,
how would we rectify it in real time ..........,
can anyone tell me tips please.....all masters please advice me some solutions based on real time plz..,
Regards
swetha

Hi Swetha,
I guess you are new to BW. Most of the performance problems are best learnt on the job. The more the time you would spend on the system the more you would learn. This forum has lots of info on the possible errors. You could search for the error you face.
The common errors during extraction & reporting are:
1. Timestamp error.
2. Invalid values
3. Tablespace Issue
4. Job getting cancelled due to lack of resources.
5. Deadlocks
6. No data available for reporting
7. Job running for longtime
etc..etc..etc...
The list is too long to be discussed here. You could refer to the web log by Siggi. /people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
You can serach through the forum by using the key words I mentioned.
Hope this helps.
Bye
Dinesh

Errors during Data loads

Similar Messages

Maybe you are looking for