Errors during project validation

I had my iMovie file on a Windows drive and added clips to it over the network. Then I copied the file back to the iMac (Intel version) to share it over to iDVD. When I tried to create a disk image, I got the error message. It offered to show me the map, but there was nothing that I could tell that was a problem.
I read the other posts on this topic and tried the trick to delete the "encoded assets". I tried several times and it didn't resolve the problem. I also tried saving the iMovie file as a new file hoping that would resolve any formatting problems.
I'm fresh out of ideas...
Thanks,
Mike

Make sure no chapter markers are within two seconds
of the start or end of the timeline. Make sure no
chapter markers are within a transition. Make sure no
chapter markers are within two seconds of the end of
a transition.
I deleted all markers and tried making a disk image with only one chapter marker and the problem happened again. I'm curious about the last one though. I end all of the chapters with a three second fade-to-white transition. The first thing after a chapter end is a chapter beginning. The chapter marker is at the beginning of a chapter, which means except for the very first marker, all chapter markers are within a nanosecond of the end of a transition. Until my recent problem, I created 25 DVDs in this style and didn't have any problems.
I opened a blank file and have copied two of my chapters into it. Before I do, I deleted the title and the ending transition. I rebuilt both in the new file. With just two chapters, I can create a disc image. I'm going to copy a couple of chapters at a time and rebuild the titles and ending transitions. I'll let you know what happens. My fingers and toes are crossed...

Similar Messages

How can i find my errors during project validation before burning my project

How Can I find the errors during the project validation before burning the project??

Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Why cant burn dvd message says there where errors durring project validation

when I try to save as disc image I get a message that says errors durring project validation and wont let me burn my project used to work fine.can anyone help

Hi
My thoughts.
• Free Space on Your Start-Up (Mac OS) Hard Disk - How much ?
• Brand of DVD used ?
• Type of DVD used ?
• Video-Codec, photo file format and Audio file formats used ?
There is so much that can go wrong - so we need a lose end to start to unwind the problem.
Yours Bengt W

Java.lang.Exception error during XML validation by Integration Engine

Hi professionals,
We are trying to use XML validation by the Integration Engine.
Step 1:
We created an appropriate directory structure where we had to store the structure (xsd).
\usr\sap\<system id>\SYS\global\xi\runtime_server\A\B\C\D\E\F
A - validation
B - schema
C - GUID of the SWCV where service interface reside.
D - Repository Namespace where Service Interface is created.
E - Service Interface Name
F - Repository Namespace where Message Type or External Definition is
assigned.
Step 2:
We also changed the references in the xsd to exclude all the subdirectory references.
e.g folder1/folder2/abc.xsd is become abc.xsd only
Step 3:
We stored both xsdu2019s (schema xsd and referenced xsd to the directory created in step 1)
Step 4:
We changed the directory and xsdu2019s permissions to 777 (we chose 777 for testing purpose).
Step 5:
We changed the property schema validation of the sender agreement to Validation by Integration Engine.
Step 6:
We checked RFC destination for AI_VALIDATION_JCOSERVER on AS ABAP and AS Java and establish an successful connection test.
RESTULTS
The result of those steps is an error message in the message monitor of PI with the error tekst:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XML_VALIDATION_INB">CX_XMS_SYSERR_VALIDATION</SAP:Code>
<SAP:P1>java.lang.Exception</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>not used at the moment.</SAP:AdditionalText>
<SAP:Stack>System error occurred during XML validation</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please assist in how to solve this issueu2026.
Regards, Sjaak.

I would suggest follow Appendix A to know the exact path and since you have one XSD referring other XSD check the steps mentioned in Appendix B .... there seems to be some error in referencing ...Appendix A and B are on page 12 & 13 of this document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d06dff94-9913-2b10-6f82-9717d9f83df1?quicklink=index&overridelayout=true
Regards,
Abhishek.

PS-Remoting done in DC's ; but giving error during the validation

Hi
I have done PS-Remoting for DC's through the list of DC's from a AD management server .
Getting the error during validation through the Powershell cmd Enter-PSSession -computer "Dcname"
But when I login to the particular DC from where the above error points, and renabling the PS-Remoting as below
,the Enter-PSSession cmd gives the result correctly
Do I have to login to the DC's in the list one by one and renable as above or how to solve this issue ?
Thanks & Regards S.Swaminathan Live & let others live!!!

Hi,
This is not an issue. This is by design.
The Windows PowerShell remoting features are not enabled on Windows Server 2008 and Windows Server 2008R2 by default.
If we want to use these features, we need enable them by using the command
Enable-PSRemoting –force.
For detailed information, please refer to the link below,
Enable and Use Remote Commands in Windows PowerShell
http://technet.microsoft.com/en-us/magazine/ff700227.aspx
Besides, these features are enabled on Windows Server 2012 and Windows Server 2012R2 by default.
Best Regards.
Steven Lee
TechNet Community Support

Error during project server 2013 The property or field 'StartDate' has not been initialized. It has not been requested or the request has not been executed. It may need to be explicitly requested.

Hi sir,
when I have try to fetch the value of project start date and finish date and some other field value , I have recived error message like The property or field 'StartDate' has not been initialized. It has not been requested or the request has not been
executed. It may need to be explicitly requested.
I have used client context for project server 2013.
I have also load and execute query.but fail to resolve it Please suggest me and provide solution.
vijay

Hi,
If you use the Include<TSource> Method in the Load method, we will retrieve only the ids of items in this query, so
the listItems.ListItemCollectionPosition will not be initialized.
You can use the <ViewFields> tag in CAML Query to specify the field values to return with each item instead.
Best regards
Patrick Liang
TechNet Community Support

SAP PI 7.3 : Error during validation

Hello Everyone,
I have an error during the validation, and I don't now where is the problem.
The error is :
     <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30"
                                                xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
          <SAP:Category>XIServer</SAP:Category>
          <SAP:Code area="XML_VALIDATION_INB">CX_XMS_SYSERR_VALIDATION</SAP:Code>
          <SAP:P1>com.sap.aii.utilxi.xmlvalidation.impl.XMLValidationException: XML Validation for payload with root element
                                name Orders , target namespace Failed!Errors Encountered During Parsing 1.cvc-elt.1: Cannot find the
                                declaration of element 'Orders'.</SAP:P1>
          <SAP:P2>XML Validation for payload with root element name Orders , target namespace Failed!Errors Encountered
                                During Parsing 1.cvc-elt.1: Cannot find the declaration of element 'Orders'.</SAP:P2>
          <SAP:P3>Schema Not Available in Cache, try to validation with file system schemas. Validation With File System
                                 schemas also Failed. XML Validation for payload with root element name Orders , target namespace
                                  Failed!Errors Encountered During Parsing 1.cvc-elt.1: Cannot find the declaration of element 'Orders'.
                                 </SAP:P3>
          <SAP:P4/>
          <SAP:AdditionalText>not used at the moment.</SAP:AdditionalText>
          <SAP:Stack>System error occurred during XML validation</SAP:Stack>
     </SAP:Error>
The XSD File for the validation is the following
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema targetNamespace="http://site.be/Commandes" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://site.be/Commandes">
        <xsd:element name="Orders" type="Orders"/>
        <xsd:complexType name="Orders">
                <xsd:annotation>
                        <xsd:documentation xml:lang="EN">DT_Orders</xsd:documentation>
                </xsd:annotation>
                <xsd:sequence>
                        <xsd:element name="ligne" maxOccurs="unbounded">
                                <xsd:complexType>
                                        <xsd:sequence>
                                                <xsd:element name="Field1" type="xsd:string"/>
                                                <xsd:element name="Field2" type="xsd:string"/>
                                                <xsd:element name="Field3" type="xsd:string"/>
                                                <xsd:element name="Field4" type="xsd:string"/>
                                                <xsd:element name="Field5" type="xsd:string"/>
                                        </xsd:sequence>
                                </xsd:complexType>
                        </xsd:element>
                </xsd:sequence>
        </xsd:complexType>
</xsd:schema>
Can someone give me some input to help me to resolve this problem ?
Thanks a lot
JC

How about a slight change to the xsd? Try with the following, it seems to work fine:
<?xml version="1.0"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
   <xsd:element name="Orders" type="Orders"/>
   <xsd:complexType name="Orders">
      <xsd:choice minOccurs="0" maxOccurs="unbounded">
         <xsd:element name="ligne">
            <xsd:complexType>
               <xsd:sequence>
                  <xsd:element name="Field1" type="xsd:string" />
                  <xsd:element name="Field2" type="xsd:string" />
                  <xsd:element name="Field3" type="xsd:string" />
                  <xsd:element name="Field4" type="xsd:string" />
                  <xsd:element name="Qte" type="xsd:string" />
               </xsd:sequence>
            </xsd:complexType>
         </xsd:element>
      </xsd:choice>
   </xsd:complexType>
</xsd:schema>
You might also find this tool useful for testing such scenarios:
http://xsdvalidation.utilities-online.info/
By the way - how did you get the xsd that you are currently using?

What is Project Validation?

I composed a movie on iMovie6 (because I find it much easier to use), transferred it to iDVD8, selected a theme,and filled all the drop zones with photos. It seems to play perfectly on the iDVD preview, however when I attempt to burn the project onto a DVD-R disk there is a message saying "There were warnings during project validation that should be resolved before attempting to burn the DVD." What does that mean and how can I identify the problems? Could it be that the iMovie6 and iDVD8 are not compatible? I've spent numerous hours on this project, bought a One on One card at the local Apple store and spent an hour with a technician (they have no available hours until next week!), paid a consultant for two hours of help here at home, and I still have problems. Any suggestions would be greatly appreciated.

Look at these topics as there may be the answer you're looking for in one of them:
Burning a DVD - error message
error message in iDVD - too much motion in the menu?
errors in project
Most appear to deal with too much motion in the menus. A total of 15 minutes is allowed.
Tip: Save the project as a disk image via the File->Save as disk image menu option before burning to disk. This will let you play the mounted disk image with DVD Player to make sure the encoding was OK before committing to disk. If the disk image plays as expected in DVD Player you can burn the it to disk using Disk Utility and burn at the slowest speed available.
OT

Error during validating Project Mgmt Templ. in Item

Hi Gurus,
I am working with PPM 5.0 and facing an issue while creating a Project from Project template that is assigned to an Item type. In Item detail screen, when I click on "Create Project on saving" check-box and select a particular Project Template, I am getting message "Error during validation of Project management template".
Following are the IMG activities I have done:
(1) Define Portfolio Item type:
- Link to Project system = Portfolio and Project Management
- NoAutoPro = " "
(2) Map Item type to Project Templates:
- Item type to Project template = I have mapped two Project Mgmt templates to one Item type
- Item type to Project type = mapped accordingly
(3) In Base System Interfaces -> Application Object Settings -> Define Object Link Types:
- For all 0RPM* objects, I have mentioned Logical and Destination system as newly created Logical system which is already assigned to system client.
After doing these settings also I am facing the above mentioned error.
Can anyone please guide me where I am going wrong?
Thanks in advance.

Hi Ravi,
Considering above mentioned Object link grouping, I also made the changes in DFM.
Following is the screenshot showing same. Unfortunately still no luck.
<< Object type setting >>
<< DFM settings for obj synchronization >>

What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project: - There appears to be a broken asset in your project. Correct this problem before burning this project."

What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project: - There appears to be a broken asset in your project. Correct this problem before burning this project."

It means that iDVD has found a problem with one of the movies added to the project. Did you edit the movie after it had been added to the project.
Create a new project and add your assets, movies, slides, etc. again and follow this workflow to help ensure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Error message: "Enter valid currency [Message 173-57]" during Deposit transaction

Hi All,
Is there a specific reason why can't I deposit from a "Multi-currency" cash account to a "specific (i.e., USD)" cash account using the Banking> Deposits> Deposit module.
I have already read below threads related to this issue.
Error message "Enter valid currency [Message 173-57]" during cash deposit
Can't Create Cash Deposit of Journal Entry due to "Invalid Currency" Error
Transfer Between bank accounts in different currencies
GL Postings between different currency accounts
foreign currency transactions
SAP Business One Note: 1260658 - Transfer monies between different monocurrency accounts
I have posted successfully e cash transfer from multicurrency to monocurrency cash account thru Journal Entry, However, I wanted to know the reason why it is not possible to post this transaction thru the Banking> Deposit module.
Appreciate your feedback on this matter.
Thanks!

Hi,
Same error message is appeared in 8.81 PL10. So this is not due to PL. If you select other than local currency at deposit currency, this error appears.
Let me check and update.
Thanks & Regards,
Nagarajan

Can not Update icloud for win7 Sheep error during transformation. check that the indicated transmitter propagating path is valid. tryet in appel updater and tryet downloading from apple but the same

Can not Update icloud for win7 Gets
Sheep error during transformation. check that the indicated transmitter propagating path is valid.
tryet in appel updater and tryet downloading from apple but the same

Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.

ICal yields "Error during PUT for mailto:valid@email: iMIP request failed"

Hello,
I'm trying to bring up an iCal server (using Mac OS X Lion 10.7.3 Server on a Mac Mini). The basic configuration runs fine. But when I tried to enable eMail invitations, I got stuck with those messages in the error log:
[twistedcaldav.scheduling.imip#error] Could not do server-to-imip request : <twistedcaldav.scheduling.imip.ScheduleViaIMip object at 0x10075e5d0> User timeout caused connection failure.
[twistedcaldav.scheduling.scheduler.ScheduleResponseQueue#error] Error during PUT for mailto:valid@email: iMIP request failed
My configuration settings:
calendar:Scheduling:CalDAV:EmailDomain = ""
calendar:Scheduling:CalDAV:HTTPDomain = ""
calendar:Scheduling:CalDAV:AddressPatterns = _empty_array
calendar:Scheduling:iMIP:Sending:Server = "valid.mail.server"
calendar:Scheduling:iMIP:Sending:UseSSL = no
calendar:Scheduling:iMIP:Sending:Username = "valid@email"
calendar:Scheduling:iMIP:Sending:Address = "valid@email"
calendar:Scheduling:iMIP:Sending:Password = "safe_password"
calendar:Scheduling:iMIP:Sending:Port = 25
calendar:Scheduling:iMIP:Enabled = yes
calendar:Scheduling:iMIP:MailGatewayPort = 62310
calendar:Scheduling:iMIP:Receiving:Server = "valid.mail.server"
calendar:Scheduling:iMIP:Receiving:UseSSL = yes
calendar:Scheduling:iMIP:Receiving:Username = "valid_email"
calendar:Scheduling:iMIP:Receiving:PollingSeconds = 30
calendar:Scheduling:iMIP:Receiving:Type = "imap"
calendar:Scheduling:iMIP:Receiving:Password = "safe_password"
calendar:Scheduling:iMIP:Receiving:Port = 993
calendar:Scheduling:iMIP:AddressPatterns:_array_index:0 = "mailto:.*"
calendar:Scheduling:iMIP:MailGatewayServer = "valid.mail.server"
calendar:Scheduling:iSchedule:Enabled = no
calendar:Scheduling:iSchedule:Servers = "servertoserver.xml"
calendar:Scheduling:iSchedule:AddressPatterns = _empty_array
It does not even try to connect to the given smtp server. How do I proceed?

I dug into the sources, and am now smarter
the above settings are invalid, because of the gateway (this has to be iCal itself):
calendar:Scheduling:iMIP:MailGatewayServer = "localhost"
Now the IMAP server is being asked, but now I have the next problem:
[mailgateway] 2012-03-27 11:14:37+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadFactory#debug] Scheduling next IMAP4 poll
[mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] RECEIVED: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE AUTH=PLAIN AUTH=LOGIN] Dovecot ready.
[mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] IMAP servergreeting
[mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] SENDING: 0001 AUTHENTICATE PLAIN
[mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] RECEIVED: +
[mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] SENDING: 1GNhbEwhZHNwZXJ0LmRlAFlpZXE5YW==
[mailgateway] 2012-03-27 11:15:09+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] RECEIVED: 0001 NO [AUTHENTICATIONFAILED] Authentication failed.
[mailgateway] 2012-03-27 11:15:09+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] IMAP authenticate failed for valid@email, trying login
[mailgateway] 2012-03-27 11:15:09+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] SENDING: 0002 LOGIN "valid@email" "valid_password"
[mailgateway] 2012-03-27 11:15:16+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] RECEIVED: 0002 NO [AUTHENTICATIONFAILED] Authentication failed.
[mailgateway] 2012-03-27 11:15:16+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#error] IMAP login failed for valid@email
[mailgateway] 2012-03-27 11:15:16+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadFactory#debug] IMAP factory connection lost

?¿There was an error during muxing preparation (project conversion).?¿

*There was an error during muxing preparation (project conversion).*
can anyone elaborate on this?

Same thing just happened to me. I re-output my quicktime movie with chapter markers turned off. You probably have a chapter mark set too close to the beginning, end or near a transition. I didn't have time to futz with the markers so I just turned them off.
Muxing stands for multiplexing. It's when iDVD takes all the data layers, video, audio etc. and multiplexes them into one data stream. When you play the dvd in your player that one data stream is DE-Muxed back into the original layers.
When you give iDVD a quicktime movie with chapter marks it encodes those chapters as separate mpeg 2 clips. When it muxes it combines everything into one stream. If there are any inconsistencies then muxing fails.
DVD Studio pro gives a more detailed log when muxing fails. It usually involves problems with chapter marks.
Message was edited by: Daniel Nocera

Errors during validation

I am trying to burn using iDVD 6 but keep getting an "error during validation" message. There are no warnings in the map menu, and the dvd plays perfectly in preview. No matter what I do, I keep getting this message. Help!

Hi anpak:
Welcome to discussions!
Do you know the rules of chapter markers?
*Make sure no chapter markers are within two seconds of the end of a transition.
*Make sure no chapter markers are within two seconds of the start or end of the timeline.
*Make sure no chapter markers are within a transition.
Does that apply to you?
Sue

Errors during project validation

Similar Messages

Maybe you are looking for