Errors encountered in 6i running ogdemo - og-01629 & og-00609
ogdemo is running fine with D2k Forms 4.5 and Graphics 2.5 the
old version,
but with Developer 6i rel 2.0 with patch 3a not working and
above mentioned errors are encountered
while checking graphics demo & using og.pll
specific errors encountered within og.getnumparam - og.interpret
routines..
Please guide to solve the above problem.
Thanking You
Hi ,
re:og.pll not working in 6i, is there any latest version ?
Posted: Nov 24, 2001 12:23 AM in response to: ddshah in response to: ddshah
Dont' worry too much about drill demo example,because it had problem with 4.5 too
I have used og.pll in 4.5 and porting my forms and graphics in 6i without problem
CiaoI have the same problem and look for Og.pll in 4.5 .
Would you tell me , where I can download this OG.PLL . I have looked in Oracle-website and see only OG.PLL for 6i .
Thanks
[email protected]
Similar Messages
-
Signal 4 error encountered while running a customized report
Signal 4 error encountered while running a customized report
We are running Oracle Applications version 11.5.10 on Oracle RDBMS 9.2.0. and IBM AIX 5.3 o production system and AIX 5.2 on test machines. We have made a new clone of production database on test machine and after installation of a clone on test-machine all customized reports terminated with signal 4 error.
Can anybody tell the possible causes of signal 4 errors and their remidies ?Thank you for the link, i will read it...
I have problemss with PDF output...
When trying to run any concurrent request with PDF output, it completed with error and show the following message in the request log file:
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AR8MSWIN1256
Spawned Process 499776
stat_low =84
stat_high = 0
emsg:was terminated by signal 4
Program was terminated by signal 4
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 20824997 -
Hi all,
Just a heads up to anyone else who encounters this error when installing device firmware cop files onto CUCM.
We were upgrading the firmware on our CUCM cluster (small - consists of 1 x Publisher and 1 x Subscriber) - running 8.0.2.40000-1
I was installing:
cmterm-7936-sccp.3-3-21.cop.sgn
cmterm-7937-1-4-4-SCCP.cop.sgn
cmterm-7941_7961-sccp.9-3-1SR2-1.cop.sgn
cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn
When doing so on the publisher server - it was throwing the following error output (note that the files actually ended up on the TFTP server but devices were not picking up the new firmware):
Installation Status
File cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn
Start Time Thu Mar 06 19:34:24 WST 2014
Status
Error encountered: ERROR: Final installdb run unsuccessful
03/06/2014 19:33:42 file_list.sh|Starting file_list.sh|<LVL::Info>
03/06/2014 19:33:42 file_list.sh|Parse argument method=sftp|<LVL::Debug>
03/06/2014 19:33:42 file_list.sh|Parse argument source_dir=/|<LVL::Debug>
03/06/2014 19:33:42 file_list.sh|Parse argument dest_file=/var/log/install/downloaded_versions|<LVL::Debug>
03/06/2014 19:33:42 file_list.sh|Parse argument remote_host=10.133.1.240|<LVL::Debug>
03/06/2014 19:33:42 file_list.sh|Parse argument user_name=ccmadministrator|<LVL::Debug>
03/06/2014 19:33:42 file_list.sh|Calling SFTP command with metering off|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|SFTP command complete (0)|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|List file (pre-filtered):|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|(CAPTURE) RSA|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|(CAPTURE) UC|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|(CAPTURE) WIRELESS|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|(CAPTURE) asa914-k8.bin|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|(CAPTURE) cmterm-7936-sccp.3-3-21.cop.sgn|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|(CAPTURE) cmterm-7937-1-4-4-SCCP.cop.sgn|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|(CAPTURE) cmterm-7941_7961-sccp.9-3-1SR2-1.cop.sgn|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|(CAPTURE) cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn|<LVL::Debug>
03/06/2014 19:33:43 file_list.sh|/usr/local/bin/base_scripts/filter.sh file=/var/log/install/downloaded_versions|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|Parse argument file=/var/log/install/downloaded_versions|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|No patch type specified. Optional.|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|No upgrade mode specifed. Optional.|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|Current version is 8.0.2.40000-1|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|Processing token "RSA"|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|INorOUT=OUT RSA: Not a signed patch file|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|Processing token "UC"|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|INorOUT=OUT UC: Not a signed patch file|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|Processing token "WIRELESS"|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|INorOUT=OUT WIRELESS: Not a signed patch file|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|Processing token "asa914-k8.bin"|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|INorOUT=OUT asa914-k8.bin: Not a signed patch file|<LVL::Debug>
03/06/2014 19:33:43 filter.sh|Processing token "cmterm-7936-sccp.3-3-21.cop.sgn"|<LVL::Debug>
03/06/2014 19:33:44 filter.sh|INorOUT=IN cmterm-7936-sccp.3-3-21.cop.sgn: filter passed|<LVL::Debug>
03/06/2014 19:33:44 filter.sh|Processing token "cmterm-7937-1-4-4-SCCP.cop.sgn"|<LVL::Debug>
03/06/2014 19:33:44 filter.sh|INorOUT=IN cmterm-7937-1-4-4-SCCP.cop.sgn: filter passed|<LVL::Debug>
03/06/2014 19:33:44 filter.sh|Processing token "cmterm-7941_7961-sccp.9-3-1SR2-1.cop.sgn"|<LVL::Debug>
03/06/2014 19:33:44 filter.sh|INorOUT=IN cmterm-7941_7961-sccp.9-3-1SR2-1.cop.sgn: filter passed|<LVL::Debug>
03/06/2014 19:33:44 filter.sh|Processing token "cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn"|<LVL::Debug>
03/06/2014 19:33:44 filter.sh|INorOUT=IN cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn: filter passed|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|List file (post-filtered):|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) RSA:1|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) UC:1|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) WIRELESS:1|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) asa914-k8.bin:1|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) cmterm-7936-sccp.3-3-21.cop.sgn:0|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) cmterm-7937-1-4-4-SCCP.cop.sgn:0|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) cmterm-7941_7961-sccp.9-3-1SR2-1.cop.sgn:0|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn:0|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|List file (pre-structured):|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) RSA:1|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) UC:1|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) WIRELESS:1|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) asa914-k8.bin:1|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) cmterm-7936-sccp.3-3-21.cop.sgn:0|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) cmterm-7937-1-4-4-SCCP.cop.sgn:0|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) cmterm-7941_7961-sccp.9-3-1SR2-1.cop.sgn:0|<LVL::Debug>
03/06/2014 19:33:44 file_list.sh|(CAPTURE) cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn:0|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|List file (post-structured):|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|(CAPTURE) <InstallList>|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|(CAPTURE) <FilteredItem type="" file="RSA" result="1"/>|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|(CAPTURE) <FilteredItem type="" file="UC" result="1"/>|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|(CAPTURE) <FilteredItem type="" file="WIRELESS" result="1"/>|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|(CAPTURE) <FilteredItem type="" file="asa914-k8.bin" result="1"/>|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|(CAPTURE) <InstallItem type="copfile" secure-file="cmterm-7936-sccp.3-3-21.cop.sgn" version="" file="cmterm-7936-sccp.3-3-21.cop" reboot="no"/>|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|(CAPTURE) <InstallItem type="copfile" secure-file="cmterm-7937-1-4-4-SCCP.cop.sgn" version="" file="cmterm-7937-1-4-4-SCCP.cop" reboot="no"/>|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|(CAPTURE) <InstallItem type="copfile" secure-file="cmterm-7941_7961-sccp.9-3-1SR2-1.cop.sgn" version="" file="cmterm-7941_7961-sccp.9-3-1SR2-1.cop" reboot="no"/>|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|(CAPTURE) <InstallItem type="copfile" secure-file="cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn" version="" file="cmterm-7945_7965-sccp.9-3-1SR2-1.cop" reboot="no"/>|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|(CAPTURE) </InstallList>|<LVL::Debug>
03/06/2014 19:33:46 file_list.sh|success|<LVL::Info>
03/06/2014 19:33:46 file_list.sh|file_list.sh complete (rc=0)|<LVL::Info>
03/06/2014 19:34:19 upgrade_validate_file.sh|Starting upgrade_validate_file.sh|<LVL::Info>
03/06/2014 19:34:19 upgrade_validate_file.sh|Parse argument method=sftp|<LVL::Debug>
03/06/2014 19:34:19 upgrade_validate_file.sh|Parse argument source_dir=/|<LVL::Debug>
03/06/2014 19:34:19 upgrade_validate_file.sh|Parse argument file_name=cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn|<LVL::Debug>
03/06/2014 19:34:19 upgrade_validate_file.sh|Parse argument remote_host=10.133.1.240|<LVL::Debug>
03/06/2014 19:34:19 upgrade_validate_file.sh|Parse argument user_name=ccmadministrator|<LVL::Debug>
03/06/2014 19:34:19 upgrade_validate_file.sh|Getting patch size via sftp for cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn|<LVL::Info>
03/06/2014 19:34:19 upgrade_validate_file.sh|Size of patch file = 6018125|<LVL::Info>
03/06/2014 19:34:19 upgrade_validate_file.sh|Total space needs = 12036250|<LVL::Info>
03/06/2014 19:34:19 upgrade_validate_file.sh| Free space : 126461788160|<LVL::Info>
03/06/2014 19:34:19 upgrade_validate_file.sh|Space needed : 24072500|<LVL::Info>
03/06/2014 19:34:19 upgrade_validate_file.sh|There is enough space on device to proceed.|<LVL::Info>
03/06/2014 19:34:19 upgrade_validate_file.sh|success|<LVL::Info>
03/06/2014 19:34:19 upgrade_validate_file.sh|upgrade_validate_file.sh complete (rc=0)|<LVL::Info>
03/06/2014 19:34:19 upgrade_get_file.sh|Starting upgrade_get_file.sh|<LVL::Info>
03/06/2014 19:34:19 upgrade_get_file.sh|Parse argument method=sftp|<LVL::Debug>
03/06/2014 19:34:19 upgrade_get_file.sh|Parse argument source_dir=/|<LVL::Debug>
03/06/2014 19:34:19 upgrade_get_file.sh|Parse argument file_name=cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn|<LVL::Debug>
03/06/2014 19:34:19 upgrade_get_file.sh|Parse argument dest_dir=/common/download/|<LVL::Debug>
03/06/2014 19:34:19 upgrade_get_file.sh|Parse argument remote_host=10.133.1.240|<LVL::Debug>
03/06/2014 19:34:19 upgrade_get_file.sh|Parse argument user_name=ccmadministrator|<LVL::Debug>
03/06/2014 19:34:20 upgrade_get_file.sh|Starting SFTP of cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn|<LVL::Info>
03/06/2014 19:34:21 upgrade_get_file.sh|SFTP command complete (0)|<LVL::Info>
03/06/2014 19:34:21 upgrade_get_file.sh|Download of iso file RTMTStart|<LVL::Notice>
03/06/2014 19:34:21 upgrade_get_file.sh|Create md5 "/common/download/cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn.md5"|<LVL::Info>
03/06/2014 19:34:21 upgrade_get_file.sh|MD5(/common/download/cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn)= e3:02:d3:e1:89:ff:a1:eb:0a:71:52:03:ad:d7:e2:85|<LVL::Debug>
03/06/2014 19:34:21 upgrade_get_file.sh|Create md5 complete|<LVL::Info>
03/06/2014 19:34:21 upgrade_get_file.sh|Authenticate file "/common/download/cmterm-7945_7965-sccp.9-3-1SR2-1.cop.sgn"|<LVL::Info>
03/06/2014 19:34:21 upgrade_get_file.sh|File authentication complete|<LVL::Debug>
03/06/2014 19:34:21 upgrade_get_file.sh|Download of iso file RTMTFinish|<LVL::Notice>
03/06/2014 19:34:22 upgrade_get_file.sh|success|<LVL::Info>
03/06/2014 19:34:22 upgrade_get_file.sh|upgrade_get_file.sh complete (rc=0)|<LVL::Info>
03/06/2014 19:34:24 Terminating active side processes
03/06/2014 19:34:24 Terminating active side processes done
03/06/2014 19:34:24 Terminating inactive side processes
03/06/2014 19:34:24 Calling /usr/local/bin/base_scripts/sd_killPartitionB_PIDs.sh
03/06/2014 19:34:24 Terminating inactive side processes done
(13953) Thu Mar 6 19:34:30 WST 2014
install option
(13953) Thu Mar 6 19:34:30 WST 2014
Successful untarring of option /common/download//cmterm-7945_7965-sccp.9-3-1SR2-1.cop.
(13953) Thu Mar 6 19:34:36 WST 2014
Publisher: Starting installdb... /bin/su -l informix -s /bin/sh -c "source /usr/local/cm/db/dblenv.bash /usr/local/cm ; source /usr/local/cm/db/informix/local/ids.env ; nice /usr/local/cm/bin/installdb -x /usr/local/cm/db/xml/xml"
disablenotify rc[0]
xml DSN=ccm_super /usr/local/cm/db/xml/xml
installXml rc[1]
enablenotify dsn[DSN=ccm_super]
enablenotify rc[0]
installdb Failure [-x] 1
(13953) Thu Mar 6 19:34:47 WST 2014
ERROR: Final installdb run unsuccessful
I'd read in various places to perform a CLI command "run loadxml" - which we did but it produced the following output:
admin:run loadxml
This command is processor intensive, and may take a few minutes to run.
It should only be run on the publisher.
Some services may require a restart afterwards.
This is a CPU intensive command and will take a considerable amount of time to complete. Do you want to continue (y/n)?
Starting loadxml
disablenotify dsn[DSN=ccm_super]
disablenotify rc[0]
xml DSN=ccm_super /usr/local/cm/db/xml/xml
installXml rc[1]
enablenotify dsn[DSN=ccm_super]
enablenotify rc[0]
installdb Failure [-x] 1
loadxml function complete
Failure essentially.
Note that the installation went ahead without issues on the Subscriber servers after we tried on the publisher. I believe this is due to it only copying the files to the TFTP server and not updating the database.
I also noted that the following features vanished from the CUCM Administration GUI (the menus were there but the pages came up blank):
"Enterprise Paramaters"
"Enterprise Phone Configuration"
"Service Parameters" (after selecting "server" & "service" drop down options, nothing was displayed)
Within individual "Phone Configuration" - the entire "Product Specific Configuration Layout" was missing from all devices.
I was also unable to export the 'Cisco Database Installation Service' logs from RTMT - it threw an error to the status bar at the bottom stating "Collection cancelled for node <publisher> due to the error" (and there was no error info output...joy!).
I called in TAC and Roman Kramarski assisted me via WebEx to full resolution of the issue - thanks Roman
After running "run loadxml"
We ran the following command which showed us (after much wizzing by of entries) the list of log files, the 5th or so last file in the list being the log output from the "run loadxml" output -
The command: "file list activelog /cm/trace/dbl/sdi detail date"
Our file in question happened to be called "installdb20140306-230735.log" (like I said, was about 5th from the bottom of the list)
Next we viewed the file:
"file view activelog /cm/trace/dbl/sdi/installdb20140306-230735.log"
In the file, fairly close to the top, it showed the following error message:
"23:07:35.047 | DOMErrorReporter::fatalError *ERROR* Fatal Error at file /usr/local/cm/db/xml/xml/366X_display_instance-fxo_port_gs.xml, line 56, column 22"
This, along with the output of the run loadxml command, indicated that "/usr/local/cm/db/xml/xml/366X_display_instance-fxo_port_gs.xml" file was corrupted or incomplete.
Roman (TAC) then used the Cisco access to root in order to look at the actual file.
It was incomplete - it ended mid closure of a tag:
"<name>OutputAttenuation</n#"
(Instead of "<name>OutputAttenuation</name>" plus a whole bucketload more output.
Luckily I had a fresh install of the exact same version of CUCM just installed on in a dev environment - so Roman was able to get into that one, TFTP the file out, and then TFTP the new file in.
We moved the old corrupt file into another folder (as we renamed it initially and then ran "run loadxml" which produced the error again) - copied the new complete file into the folder - then "run loadxml" ran successfully.
admin:run loadxml
This command is processor intensive, and may take a few minutes to run.
It should only be run on the publisher.
Some services may require a restart afterwards.
This is a CPU intensive command and will take a considerable amount of time to complete. Do you want to continue (y/n)?
Starting loadxml
disablenotify dsn[DSN=ccm_super]
disablenotify rc[0]
xml DSN=ccm_super /usr/local/cm/db/xml/xml
installXml rc[0]
enablenotify dsn[DSN=ccm_super]
enablenotify rc[0]
installdb Success[-x]
loadxml function complete
NOTE that the running of run loadxml did not take that long and didn't cause any outages to my system.
After we did this - the installations went ahead successfully.
After a restart of the TFTP service on each server - firmware upgrades went ahead successfully.
Basically - you can do the initial troubleshooting of checking logs of run loadxml and then pass that detail to Cisco TAC to get them to use root access to copy a fresh version of the file across.
Hope this helps.Hi Thanks for the information, this help me a lot, I have the same issue but with some differences, because when I search the error on the log file, I saw
08/25/2014 06:14:49.911 installdb| DOMErrorReporter::fatalError *ERROR* Fatal Error at file , line 0, column 0
message: An exception occurred! Type:RuntimeException, Message:The primary document entity could not be opened. Id=/usr/local/cm/db/xml/xml/ICS77XX_MRP2XX_display_instance-bri.xml|
08/25/2014 06:14:49.911 installdb|<--DOMErrorReporter::fatalError |
When I search the file I couldn´t find it, so I think this could be because I made a booteable ISO from an upgrade from the Cisco Page, so I go to the production server version 6.1.2 and copied the file missing into my lab and run the command "run loadxml" sucessfully, after that everything works great!
Thanks in advance for your time to post this.
Regards! -
Just purchased Adobe Acrobat XI, when i download it and select run a tab appears with title 'Confirm Upgrade of Acrobat Pro' i select continue, another tab apears stating 'Error Encountered' - Acrobat installer encountered and unexpected failure. Please try again. If it continues to fail contact adobe support. Please assist me asap, i need this working ASAP as i specially purchased for immediate use.. thanks:)
No, there was no option for enter the serial number, which i gather u mean by S/N?
-
When I click on the Firefox icon The page comes up white and in the middle it says "Firefox has errored and has stopped running". Then it looks to windows for a solution but finds none.
I am not a Windows 7 user, or particularly familiar with that error message but maybe it is worth looking at these articles
# [[firefox crashes when you open it]]
# [[How do I avoid crashes?]]
# [[firefox hangs]] -
Apple Mail The server error encountered was: The connection to the server "
I have had my apple mail set up for some time now, through Gmail, and it has worked fine. I recently moved into a college dorm and now my apple mail gives me this error message
There may be a problem with the mail server or network. Check the settings for account "POP Account" or try again.
The server error encountered was: The connection to the server "pop.gmail.com" on port 995 timed out.
I've tried everything I could think to try, including taking the SSL off, restarting, quitting apple mail, redoing all the settings, and nothing seems to be helping me connect. I did the connectivity test and it says it's connected to the internet, it's just not getting the mail from my Gmail account. Thanks,
AaronWhat are the settings for both your Incoming and Outgoing servers, including port number, authentication method, and whether or not SSL is enabled for both?
Also, it's possible your college is blocking traffiic from Google, so you might try changing the DNS Servers by going to System Preferences > Network > Configure > TCP/IP and enter these two:
208.67.222.222
208.67.220.220
then click Apply Now, quit System Preferences and restart Mail and any other Internet applications you were running. Check to see if Mail still gives you problems.
Mulder -
A Critical error encountered while loading webpage.
Was running 2.1.51 and when browsing to the status link while logged in to the web gui I got a blank web page with the following text:
A Critical error encountered while loading webpage.
Reboot router - log back in - can go anywhere except the status page -- get same error page
made the mistake of downloading and upgrading firmware to 2.1.71 = upgrade completed successfully = presented with the new login screen confirming that the box is running the new code -- now when I log in - I don't get in rather the previous error page - and cant get anywhere.
A Critical error encountered while loading webpage.
the url is https://192.168.75.1/scgi-bin/platform.cgi but it doesn't load only displays the error.
could someone share another valid management url for the box so I can at least try to get in somewhere before attempting to factory reset this POS ;-(
thanks.Thanks for the response. Based on the number of crickets that I heard after asking the question, I did indeed factory reset the box. Luckily I had a backup of the config so it wasn't too painful to restore.
I beleive the root cause co-incided with the expiration of the trend micro web protection gateway service.
For whatever reason, I did not receive any notification that the service was to expire but the error experienced was noticed just two days after the subscription expired... I had successfully logged in without issue and was able to view the status tab only a week earlier.
be sure to pay the cisco tax on time or they'll lock you out of your box was the lesson learned... -
I am currently running CS3, windows XP, service pack 2, with recent update, 5.03 installed today.
I just opened a 500 page document not in sections where 90% of the document is a placed PDF.
The PDFS were placed using a sample Script that came with Indesign, that instructs the PDF to automatically flow each page after another.
When scrolling through quickly in the pages pallette, I get the follwing error:-
"Error encountered while reading TIFF image, Image may be damaged of incompatible. Resave the image with different settings and try again."
I click OK.
Then I get the following error.....
" Could not complete request because of database error. The File "ABC.indd" is damaged (Error Code: 3).
Click OK....
Then I get the following error....
Adobe Indesign is shutting down. A serious error was detected. Please restart Indesign to recover work in any unsaved Indesign documents.
Then I get the error.......
Indesign.exe has encountered a problem and needs to close. We are sorry for any inconveneince.
And I have two buttons to click....
Debug or Close.....
If I click Debug, it closes Indesign.
Within this window there is also a window to gather further information....I click it and it tells me...
"Indesign.exe....Error Signature AppName: indesign.exe AppVer: 5.0.3.662
ModName: public.dll ModVer: 5.0.3.662 Offset: 0002e19a"
To view technical inforamtion about the error report, clikc here....
"Then it creates an error report and tells me where the report is located along with a scrollable window of 0xc0000005 and heap of zeros."
The report conatains a whole heap of CHECKSUM ERRORS.
CAN ANYONE PLEASE HELP??
I had these errors before updating to 5.03 and the patch hasn't rectified anything!!Open the .inx file in CS3 (that's what you have, right?) and save as a new .indd.
I'd also be tempted to open the tiff in Photoshop and do a save as to re-write it.
Let us know if it helps.
Storing files on the network leaves you more open tot he risk of file damage during transfer and save operations.
Peter -
Mail is showing an error on one of our email accounts. The error is "The server error encountered was: unable to process from lines (envelopes), change recognition modes or check for corrupted mail drop." In Mail, we have two different email accounts, but only was has this error come up. I have checked the settings and they have not changed. I contacted the person who runs the email server and he says there is no problem at his end. I have tried to add a new email account but it also comes up with the same error. What can I try? Any help is appreciated.
Hi eckard, and a warm welcome to the forums!
Quit Mail.
In your Home folder. open Library folder, open Mail folder in that, look for the Envelope Index, and drag it to the Desktop.
Then in your Home folder. open Library folder, open Caches folder in that, look for the Mail, and drag it to the Desktop.Move Envelope Index to the Desktop in...
/Users/YourUserName/Library/Mail/Envelope Index
Move this folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail -
FMLE Unexpected Error encountered in encoding process every 2 minutes
Hi,
We are wondering if anyone has advice as to what could be causing the following problem.
We are having an issue where by we are getting an Unexpected error ever 2 minutes.
We are running FMLE 3.2 on a Mac Pro server with a Blackmagic Intensity Pro Capture card
Wed Jan 11 2012 17:49:49 : Session Started
Wed Jan 11 2012 17:49:49 : Video Encoding Started
Wed Jan 11 2012 17:49:49 : Audio Encoding Started
Wed Jan 11 2012 17:51:49 : Unexpected error encountered in encoding process.
Wed Jan 11 2012 17:51:49 : Audio Encoding Stopped
Wed Jan 11 2012 17:51:49 : Video Encoding Stopped
Wed Jan 11 2012 17:51:49 : Session Stopped
Wed Jan 11 2012 17:51:51 : Primary - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Unpublish.Success
Wed Jan 11 2012 17:51:51 : Primary - Network Status: NetConnection.Connect.Closed status
Wed Jan 11 2012 17:51:51 : Primary - Disconnected
Wed Jan 11 2012 17:51:51 : Primary - Connected to FMS/3,5,7,7009
Wed Jan 11 2012 17:51:51 : Primary - Stream[1_o9kj1pu9_1@39123] Status: Success
Wed Jan 11 2012 17:51:51 : Primary - Network Command: onFCPublish
Wed Jan 11 2012 17:51:51 : Primary - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Publish.Start
Wed Jan 11 2012 17:51:51 : Backup - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Unpublish.Success
Wed Jan 11 2012 17:51:51 : Backup - Network Status: NetConnection.Connect.Closed status
Wed Jan 11 2012 17:51:51 : Backup - Disconnected
Wed Jan 11 2012 17:51:51 : Backup - Connected to FMS/3,5,7,7009
Wed Jan 11 2012 17:51:51 : Backup - Stream[1_o9kj1pu9_1@39123] Status: Success
Wed Jan 11 2012 17:51:51 : Backup - Network Command: onFCPublish
Wed Jan 11 2012 17:51:51 : Backup - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Publish.Start
Wed Jan 11 2012 17:51:51 : File /Users/harvardiop/Movies/bobsburgers.f4v closed.
Wed Jan 11 2012 17:51:51 : Renaming existing file from /Users/harvardiop/Movies/bobsburgers.f4v to /Users/harvardiop/Movies/bobsburgers.4.f4v
Wed Jan 11 2012 17:51:51 : Session Started
Wed Jan 11 2012 17:51:51 : Video Encoding Started
Wed Jan 11 2012 17:51:52 : Audio Encoding Started
Wed Jan 11 2012 17:53:51 : Unexpected error encountered in encoding process.
Wed Jan 11 2012 17:53:52 : Audio Encoding Stopped
Wed Jan 11 2012 17:53:52 : Video Encoding Stopped
Wed Jan 11 2012 17:53:52 : Session Stopped
Wed Jan 11 2012 17:53:53 : Primary - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Unpublish.Success
Wed Jan 11 2012 17:53:53 : Primary - Network Status: NetConnection.Connect.Closed status
Wed Jan 11 2012 17:53:53 : Primary - Disconnected
Wed Jan 11 2012 17:53:53 : Primary - Connected to FMS/3,5,7,7009
Wed Jan 11 2012 17:53:53 : Primary - Stream[1_o9kj1pu9_1@39123] Status: Success
Wed Jan 11 2012 17:53:53 : Primary - Network Command: onFCPublish
Wed Jan 11 2012 17:53:53 : Primary - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Publish.Start
Wed Jan 11 2012 17:53:53 : Backup - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Unpublish.Success
Wed Jan 11 2012 17:53:53 : Backup - Network Status: NetConnection.Connect.Closed status
Wed Jan 11 2012 17:53:53 : Backup - Disconnected
Wed Jan 11 2012 17:53:53 : Backup - Connected to FMS/3,5,7,7009
Wed Jan 11 2012 17:53:54 : Backup - Stream[1_o9kj1pu9_1@39123] Status: Success
Wed Jan 11 2012 17:53:54 : Backup - Network Command: onFCPublish
Wed Jan 11 2012 17:53:54 : Backup - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Publish.Start
Wed Jan 11 2012 17:53:54 : File /Users/harvardiop/Movies/bobsburgers.f4v closed.
Wed Jan 11 2012 17:53:54 : Renaming existing file from /Users/harvardiop/Movies/bobsburgers.f4v to /Users/harvardiop/Movies/bobsburgers.5.f4v
Wed Jan 11 2012 17:53:54 : Session Started
Wed Jan 11 2012 17:53:54 : Video Encoding Started
Wed Jan 11 2012 17:53:54 : Audio Encoding Started
Wed Jan 11 2012 17:55:54 : Unexpected error encountered in encoding process.
Wed Jan 11 2012 17:55:54 : Audio Encoding Stopped
Wed Jan 11 2012 17:55:54 : Video Encoding Stopped
Wed Jan 11 2012 17:55:54 : Session Stopped
Wed Jan 11 2012 17:55:55 : Primary - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Unpublish.Success
Wed Jan 11 2012 17:55:55 : Primary - Network Status: NetConnection.Connect.Closed status
Wed Jan 11 2012 17:55:55 : Primary - Disconnected
Wed Jan 11 2012 17:55:55 : Primary - Connected to FMS/3,5,7,7009
Wed Jan 11 2012 17:55:55 : Primary - Stream[1_o9kj1pu9_1@39123] Status: Success
Wed Jan 11 2012 17:55:55 : Primary - Network Command: onFCPublish
Wed Jan 11 2012 17:55:56 : Primary - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Publish.Start
Wed Jan 11 2012 17:55:56 : Backup - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Unpublish.Success
Wed Jan 11 2012 17:55:56 : Backup - Network Status: NetConnection.Connect.Closed status
Wed Jan 11 2012 17:55:56 : Backup - Disconnected
Wed Jan 11 2012 17:55:56 : Backup - Connected to FMS/3,5,7,7009
Wed Jan 11 2012 17:55:56 : Backup - Stream[1_o9kj1pu9_1@39123] Status: Success
Wed Jan 11 2012 17:55:56 : Backup - Network Command: onFCPublish
Wed Jan 11 2012 17:55:56 : Backup - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Publish.Start
Wed Jan 11 2012 17:55:56 : File /Users/harvardiop/Movies/bobsburgers.f4v closed.
Wed Jan 11 2012 17:55:56 : Renaming existing file from /Users/harvardiop/Movies/bobsburgers.f4v to /Users/harvardiop/Movies/bobsburgers.6.f4v
Wed Jan 11 2012 17:55:56 : Session Started
Wed Jan 11 2012 17:55:56 : Video Encoding Started
Wed Jan 11 2012 17:55:56 : Audio Encoding Started
Wed Jan 11 2012 17:57:39 : Audio Encoding Stopped
Wed Jan 11 2012 17:57:39 : Video Encoding Stopped
Wed Jan 11 2012 17:57:39 : Session Stopped
Wed Jan 11 2012 17:57:40 : File /Users/harvardiop/Movies/bobsburgers.f4v closed.
Wed Jan 11 2012 17:57:40 : Primary - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Unpublish.Success
Wed Jan 11 2012 17:57:40 : Primary - Network Command: onFCUnpublish
Wed Jan 11 2012 17:57:41 : Backup - Stream[1_o9kj1pu9_1@39123] Status: NetStream.Unpublish.Success
Wed Jan 11 2012 17:57:41 :
The following is our FMLE Profile XML
<?xml version="1.0" encoding="UTF-16"?>
<flashmedialiveencoder_profile>
<preset>
<name>Custom</name>
<description></description>
</preset>
<capture>
<video>
<device>Intensity NTSC/PAL</device>
<frame_rate>24.00</frame_rate>
<size>
<width>720</width>
<height>480</height>
</size>
</video>
<audio>
<device>Blackmagic Audio</device>
<sample_rate>22050</sample_rate>
<channels>2</channels>
<input_volume>75</input_volume>
</audio>
</capture>
<encode>
<video>
<format>H.264</format>
<datarate>500;</datarate>
<outputsize>640x426;</outputsize>
<advanced>
<profile>Baseline</profile>
<level>3.1</level>
<keyframe_frequency>5 Seconds</keyframe_frequency>
</advanced>
<autoadjust>
<enable>false</enable>
<maxbuffersize>1</maxbuffersize>
<dropframes>
<enable>false</enable>
</dropframes>
<degradequality>
<enable>true</enable>
<minvideobitrate></minvideobitrate>
<preservepfq>false</preservepfq>
</degradequality>
</autoadjust>
</video>
<audio>
<format>MP3</format>
<datarate>48</datarate>
</audio>
</encode>
<restartinterval>
<days></days>
<hours></hours>
<minutes></minutes>
</restartinterval>
<reconnectinterval>
<attempts></attempts>
<interval></interval>
</reconnectinterval>
<output>
<rtmp>
<url>rtmp://p.ep39123.i.akamaientrypoint.net/EntryPoint</url>
<backup_url>rtmp://b.ep39123.i.akamaientrypoint.net/EntryPoint</backup_url>
<stream>1_o9kj1pu9_%i@39123</stream>
</rtmp>
<file>
<limitbysize>
<enable>false</enable>
<size>10</size>
</limitbysize>
<limitbyduration>
<enable>false</enable>
<hours>1</hours>
<minutes>0</minutes>
</limitbyduration>
<path>bobsburgers.f4v</path>
</file>
</output>
<metadata>
<entry>
<key>author</key>
<value></value>
</entry>
<entry>
<key>copyright</key>
<value></value>
</entry>
<entry>
<key>description</key>
<value></value>
</entry>
<entry>
<key>keywords</key>
<value></value>
</entry>
<entry>
<key>rating</key>
<value></value>
</entry>
<entry>
<key>title</key>
<value></value>
</entry>
</metadata>
<preview>
<video>
<input>
<zoom>75%</zoom>
</input>
<output>
<zoom>75%</zoom>
</output>
</video>
<audio></audio>
</preview>
<log>
<level>100</level>
<directory>/Users/harvardiop/Movies</directory>
</log>
</flashmedialiveencoder_profile>
Thank you,Hi. I am currently having the same problems, only i do believe my settings are correct. However the error appears every thirty seconds. What am i doing wrong?
<?xml version="1.0" encoding="UTF-16"?>
<flashmedialiveencoder_profile>
<preset>
<name>Custom</name>
<description></description>
</preset>
<capture>
<video>
<device>Blackmagic HD 720p 50 - 10 Bit</device>
<frame_rate>25.00</frame_rate>
<size>
<width>1280</width>
<height>720</height>
</size>
</video>
<audio>
<device>Line In</device>
<sample_rate>44100</sample_rate>
<channels>2</channels>
<input_volume>75</input_volume>
</audio>
</capture>
<process>
<video>
<crop>
<left>15</left>
<top>15</top>
<right>15</right>
<bottom>15</bottom>
</crop>
</video>
</process>
<encode>
<video>
<format>H.264</format>
<datarate>2048;</datarate>
<outputsize>640x360;</outputsize>
<advanced>
<profile>Baseline</profile>
<level>4.1</level>
<keyframe_frequency>8 Seconds</keyframe_frequency>
</advanced>
<autoadjust>
<enable>false</enable>
<maxbuffersize>1</maxbuffersize>
<dropframes>
<enable>false</enable>
</dropframes>
<degradequality>
<enable>true</enable>
<minvideobitrate></minvideobitrate>
<preservepfq>false</preservepfq>
</degradequality>
</autoadjust>
</video>
<audio>
<format>AAC</format>
<datarate>128</datarate>
</audio>
</encode>
<restartinterval>
<days></days>
<hours></hours>
<minutes></minutes>
</restartinterval>
<reconnectinterval>
<attempts></attempts>
<interval></interval>
</reconnectinterval>
<output>
<rtmp>
<url>rtmp://p.xxxxxxx.i.akamaientrypoint.net/EntryPoint</url>
<backup_url>rtmp://b.xxxxxx.i.akamaientrypoint.net/EntryPoint</backup_url>
<stream>xxxxx</stream>
</rtmp>
</output>
<metadata>
<entry>
<key>author</key>
<value></value>
</entry>
<entry>
<key>copyright</key>
<value></value>
</entry>
<entry>
<key>description</key>
<value></value>
</entry>
<entry>
<key>keywords</key>
<value></value>
</entry>
<entry>
<key>rating</key>
<value></value>
</entry>
<entry>
<key>title</key>
<value></value>
</entry>
</metadata>
<preview>
<video>
<input>
<zoom>25%</zoom>
</input>
<output>
<zoom>50%</zoom>
</output>
</video>
<audio></audio>
</preview>
<log>
<level>100</level>
<directory>/Users/xxx/Movies</directory>
</log>
</flashmedialiveencoder_profile> -
RMAN-00558: error encountered while parsing input commands
Hi,
on 12C on Win 2008
as said in documentation :
@ (at sign)
Example 2-2 Running a Command File Within RMAN
This example shows how you can execute a command file from the RMAN prompt and from within a RUN command. User-entered text appears in bold.
RMAN> @backup_db.rman
I do as follows to run a script to back up :
RMAN> @C:\scripts\RMAN\al_backup_full_cdb.rman LOG=C:\scripts\logs\al_backup_full_log
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "log": expecting one of: "double-quoted-string, identifier, integer, single-quoted-string"
RMAN-01007: at line 1 column 1 file: standard input
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "@": expecting one of: "double-quoted-string, identifier, integer, single-quoted-string"
RMAN-01007: at line 0 column 1 file: standard input
Thank you.user10274093 wrote:
yes thank you. Like this :
@C:\scripts\RMAN\al_backup_full_cdb.rman
But how to have a log file ?
You can not use the log= clause *inside* rman, you can only use it on the shell prompt *outside* rman. -
Upgrade to APEX 4.2.3 apexins_con.sql gets Unexpected error encountered in catconInit; exiting
I am attempting to install/upgrade apex 4.2.3 under Oracle12c in a Multi-Tenant configuration.
Here are the environmental details
Windows 7 64 bit
Apex 4.2.3
ORCL: CDB$ROOT
PDBORCL: PDB$SEED
Here is the current states of the pluggable databases
SQL> SELECT NAME,OPEN_MODE,TOTAL_SIZE/1024/1024/1024 FROM V$PDBS;
NAME OPEN_MODE TOTAL_SIZE/1024/1024/1024
PDB$SEED READ ONLY .263671875
PDBORCL READ WRITE .366210938
SQL>
This is the command that I am using to re-install/upgrade APEX:
# remove 4.2.2 installation
cd M:\apex_4.2.3\apex_4.2.3_en\apex
sqlplus /@ORCL as sysdba
@apxremov.sql << this was successful
quit
Install 4.2.3 installation
sqlplus /@ORCL as sysdba
@apexins_con.sql i10wrk SYSAUX SYSAUX TEMP /i/ << this failed
The APEX installation fails immediately with the following message:
catconInit: database is not open
Unexpected error encountered in catconInit; exiting
I cannot determine which database is not open. Both my CDB$ROOT and PDBORCL are reported as open (READ WRITE Mode).
Here is my Container database
SQL> SELECT SYS_CONTEXT ('USERENV', 'CON_NAME') FROM DUAL;
SYS_CONTEXT('USERENV','CON_NAME')
CDB$ROOT
SQL> select instance_name,status from v$instance;
INSTANCE_NAME STATUS
orcl OPEN
SQL>
Here is the associated Pluggable Database
sqlplus /@PDBORCL as sysdba
SQL> select instance_name,status from v$instance;
INSTANCE_NAME STATUS
orcl OPEN
SQL> ALTER PLUGGABLE DATABASE PDBORCL OPEN;
ALTER PLUGGABLE DATABASE PDBORCL OPEN
ERROR at line 1:
ORA-65019: pluggable database PDBORCL already open
I am confused…. Which database is not open?
The PDB$SEED is open in (READ ONLY) mode, but that is simply the template database. I don't think that ever needs to be open in (Read Write) mode.sbing52,
I cannot vouch for the specific error that is being returned by catcon.pl, but I would try the following in your situation.
1. It seems you connect to CDB$ROOT and ran apxremov.sql. This only removed the common APEX option from CDB$ROOT. Your PDB is now in an inconsistent state, since APEX is no longer in the root. I would reconnect to CDB$ROOT and run apxremov_con.sql, make sure you use the one from the 4.2.3 distribution. The one in the ORACLE home will not work.
2. I would then re-run apexins_con.sql connect to CDB$ROOT. Also, you need to pass the proper parameters. Why are you passing i10wrk? You should be invoking it like:
@apexins_con.sql SYSAUX SYSAUX TEMP /i/
Regards,
Jason -
Error encountered while communicating with primary IP-address
Hi
I have recently deployed my first Exchange Server. This is an Exchange Server 2013 Standard and I set up everything using this document on Technet for installation: http://technet.microsoft.com/en-us/library/bb124778(v=exchg.150).aspx
For post-installation I used this document on Technet: http://technet.microsoft.com/en-us/library/bb124397(v=exchg.150).aspx
I have setup access to port 25, 587, 143, 993, 110, 995, 80, 443 in my routers SPI-firewall and created DNAT rules for each of these ports as well. I can send mail without any issues, but I cannot receive. Reverse DNS is working both internally and externally.
I can telnet to port 25 on my external IP and external domain which is exchange.mydomain.tld
My Exchange-server is running inside a Gen1 Hyper-V virtual machine on a Windows Server 2012 R2.
My Exchange Server has the following resources:
OS: Windows Server 2012 R2
CPU: 2 cores of AMD FX-6120 3.30GHz
RAM: 3584MB
HDD1: IDE 80GB VHDX - is currently used for all system files and for Exchange.
HDD2: SCSI 127GB VHDX - will be used for Exchange DB and logs when everything is working.
When sending mail from any internal or external e-mail address to an internal e-mail address I get the following error in Exchange Queue Viewer:
"451 4.4.0 Error encountered while communicating with primary target IP address:"421 4.2.1 Unable to connect." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate
hosts. The Last"
How can I solve this issue? If you need any more information please let me know and I will see if I can find it.Hi I have now tried to send mail to an internal address using telnet. This returned the following value:
250 2.6.0 <[email protected]> [InternalId=1971389988866] Queued mail for delivery
Next I tried to send to an external mail by using telnet and it returned this result when adding the reciepient:
550 5.7.1 Unable to relay
This is the output of the Test-Servicehealth cmdlet:
Role : Mailbox Server Role
RequiredServicesRunning : True
ServicesRunning : {IISAdmin, MSExchangeADTopology, MSExchangeDelivery, MSExchangeIS, MSExchangeMailboxAssistant
s, MSExchangeRepl, MSExchangeRPC, MSExchangeServiceHost, MSExchangeSubmission, MSExchangeThro
ttling, MSExchangeTransportLogSearch, W3Svc, WinRM}
ServicesNotRunning : {}
Role : Client Access Server Role
RequiredServicesRunning : True
ServicesRunning : {IISAdmin, MSExchangeADTopology, MSExchangeMailboxReplication, MSExchangeRPC, MSExchangeServi
ceHost, W3Svc, WinRM}
ServicesNotRunning : {}
Role : Unified Messaging Server Role
RequiredServicesRunning : True
ServicesRunning : {IISAdmin, MSExchangeADTopology, MSExchangeServiceHost, MSExchangeUM, W3Svc, WinRM}
ServicesNotRunning : {}
Role : Hub Transport Server Role
RequiredServicesRunning : True
ServicesRunning : {IISAdmin, MSExchangeADTopology, MSExchangeEdgeSync, MSExchangeServiceHost, MSExchangeTranspo
rt, MSExchangeTransportLogSearch, W3Svc, WinRM}
ServicesNotRunning : {}
Can we use this information to find a possible source for my issues? -
Errors encountered while doing BCC Full deployment in the Applying phase
Errors encountered while doing BCC Full deployment in the Applying phase. The stack trace is as below:-
**** Warning Fri Aug 02 09:43:24 BST 2013 1375433004207 /atg/epub/PublishingRepository Using default JDBC type for: project:tar814 could not find this column in the table's meta data
**** debug Fri Aug 02 09:52:54 BST 2013 1375433574278 /atg/epub/DeploymentServer Run first apply phase: true
**** debug Fri Aug 02 09:52:54 BST 2013 1375433574279 /atg/epub/DeploymentServer Switch switchable CA datasources:
**** debug Fri Aug 02 09:52:54 BST 2013 1375433574279 /atg/epub/DeploymentServer isDeploymentRollback(): false
**** debug Fri Aug 02 09:52:54 BST 2013 1375433574284 /atg/epub/DeploymentServer Current Target live datasource name: DataSourceA
**** debug Fri Aug 02 09:52:54 BST 2013 1375433574285 /atg/epub/DeploymentServer CA switching datasource: /atg/commerce/jdbc/ProductCatalogSwitchingDataSource_production
**** debug Fri Aug 02 09:52:54 BST 2013 1375433574285 /atg/epub/DeploymentServer Current live datasource name: DataSourceB
**** debug Fri Aug 02 09:52:54 BST 2013 1375433574285 /atg/epub/DeploymentServer Current offline datasource name: DataSourceA
**** debug Fri Aug 02 09:52:54 BST 2013 1375433574286 /atg/epub/DeploymentServer The current CA live datasource is pointing at the Target offline datasource. No CA switch necessary.
**** debug Fri Aug 02 09:52:54 BST 2013 1375433574287 /atg/epub/DeploymentServer Switchable CA datasources switched.
**** info Fri Aug 02 09:52:54 BST 2013 1375433574307 /atg/epub/DeploymentServer DirectSQLReplicationAdapter: Starting FIRST phase data transfer.
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver SQL Statement Failed: [++ReplicationSQL++]
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver INSERT
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver INTO ndcatalog2.extn_block_link
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver (
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver renderer_id,
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver link,
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver block_id
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver )
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver SELECT
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver t1.renderer_id,
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver t1.link,
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver t1.block_id
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver FROM
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver extn_block_link t1,
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver extn_block t2
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver WHERE t2.asset_version =
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver ( SELECT MAX ( asset_version )
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver FROM extn_block
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver WHERE
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver (
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver (
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver checkin_date <= ?
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver )
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver )
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver AND branch_id = ?
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver AND block_id = t2.block_id
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver )
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver AND t2.version_deleted = ?
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver AND t2.branch_id = ?
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver AND t1.asset_version = t2.asset_version
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver AND t1.block_id = t2.block_id
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver -- Parameters --
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver p[1] = {pd: checkin_date} 2013-07-30 10:23:57.867 (java.sql.Timestamp)
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver p[2] = {pd: branch_id} 10500 (java.lang.String)
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver p[3] = {pd: version_deleted} false (java.lang.Boolean)
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver p[4] = {pd: branch_id} 10500 (java.lang.String)
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver [--ReplicationSQL--]
**** Error Fri Aug 02 09:53:12 BST 2013 1375433592737 /com/screwfix/content/block/BlockRepository-ver java.sql.SQLSyntaxErrorException: ORA-00904: "RENDERER_ID": invalid identifier
Please note that we are migrating from ATG 2007 to ATG 10.0.1...Also we are doing deployment in this new environment for the first time only.
Thanks a lot
PijushHi Pijush,
The exception towards the end of the stack trace says the RENDERER_ID is an invalid identifier. the Oracle error 00904 indicates the column name must be wrong. Can you verify the repostiory xml on the BlockRepository and check the column name.
Regards,
Srikanth -
Hi All,
I developed a Biztalk Application aims to upload a flat file data to our system MS SQL Server database. It works fine until one day, an exception is generated as below.
"Error encountered while executing the transform project name.map name. Error:Unable to create the transform. Microsoft.XLANGs.Engine"
It continues to generate an exception until I restart the Biztalk instance. And it happens occasionally, no pattern, cannot be traced and debugged.
Anybody has an idea about this error? Please help, thank you very much.
The Biztalk Server is running on Hyper-V Virtual machine, Biztalk Server 2009 on Windows Server 2008.
The Biztalk Application consists of Mapping Functoid, Orchestration, Flatfile Schema, Flatfile Disassembler Pipeline, SQL Send Port, File Receive Port and Send Port
EricHI Eric,
I think it might happen because of large message (Out of Memory exception). As you said you have flat file as inbound, you are doing mapping and then sending it to MSSQL
SO you can check below mentioned things
1) Any custom pipeline component is used in receive pipeline. (if so optimize the code)
2) This issue haapen only with large message (BizTalk convert flat file to XMl to if you have 1MB file corresponding XML will be of higher size)
again all thing mentioned above is assumption.
YOu can use debugdiag tool to see if memory leak is happening
http://www.microsoft.com/en-in/download/details.aspx?id=26798
Maybe you are looking for
-
Lose data types after model saving
Hi all. I try to import model from erwin 7.3 in data modeler Version 3.0.0.665 after import i have this log: Oracle SQL Developer Data Modeler 3.0.0.665 Oracle SQL Developer Data Modeler Import Log Date and Time: 2011-09-20 16:31:22 MSD Design Name:
-
TS2289 Some audio files missing in iMovie...
As I am making an imovie with photos, videos and music...only SOME sections of music won't import. I ALWAYS simply drag my file once i select itunes. Since my movie is time specific with corresponding music for each set of photos, I am really in a
-
Extended classic scenarion after approval of shopping cart no PO is created
Hi Experts, In extended classic scenario,SC approved and No po created in SRM 5.0 when I check in BBP_PD status is completed and RZ20 shopping cart basket link all green and purchase order link red - Error in local purchase order. No update of refere
-
can the "mode" tag in vhost.xml file be edited using getconfig() and setconfig()?
-
Quicktime Movies on iPod?
is there a way to watch quicktime movies on the iPod (movies ive taken from my digital camera from ski trips, etc) and if so, how? I have the newest gen iPod nano. Many thanks Brian