Errors:Error in parameter transfer

Hii
I am very new to SAP and SRM as well. I am doing a scenario in which R/3 backend system that is SAPSRM5 system will SAPSRM SUS is communicating for PO to INVOICE. I done everything that is PO is reaching from R/3 to SUS and confirmation and ASN from SUS to R/3 backend system. These connection is fine.
When I am creating Invoice and sending it ro R/3 then it is Showing me two errors:-
Errors:Error in parameter transfer ( Item XXX )
Errors:System status INCM is active (SUS Invoice XXXXXXXXXX)
Can anyone tell me why these errors are coming and how to avoid these error.
please reply soon
its urgent
Thanks in advance
Regards
Sami

Hi
<u>Which SRM version are you using ?</u>
<b>Please go through the following SAP OSS Notes, which will definitely help -></b>
Note 1080762 - Held incomplete bids hold up closing of the RFx
Note 753255 - SRM40-SUS: Invoice > "Error in parameter transfer"
Note 731037 - Converting SUS 1.0 and SUS 2.0 documents to SUS 3.0
Note 954973 - SRM 5.0 SP-Stack 05 (07/2006) (SAPKIBKT05): Release/Info Not
Related Notes
Note 895217 - SUS30: SUS not integrated with CUA currently
Note 825820 - SRM40-SUS: Follow-on error when converting purchase orders
Note 782482 - Document texts are missing after conversion to SUS 3.0
Note 878678 - SUS30: SUS order can not be processed after 'Hold' action
Note 831493 - SRM40-SUS: Error in Change PO for a held purchase order (2)
Note 731037 - Converting SUS 1.0 and SUS 2.0 documents to SUS 3.0
Note 669742 - Held bids of completed bid invitations
Note 505805 - EBP: Invoice and account assignment
Do let me know.
Regards
- Atul

Similar Messages

Printing dunning notices using SMARTFORMS,error during parameter transfer

Hi Friends,
                I face a error message "Include text ZGA_DUN_HDR does not exist (object TEXT, ID ST)" when i run the dunning run.
                I had searched every node for text ZGA_DUN_HDR in the smartform,I didnt find the text in it.
However when I execute the smart form for print preview an error message "Printing dunning notices using SMARTFORMS,error during parameter transfer".This error i believe is due to wrong parameter passing in the fm 'GET_SF_DUNN_DATA'.It raises an error no_parameters_found.All parameters are passed correctly.
                Can you guys help me out.
Edited by: RAJIV KAUSHAL on Nov 14, 2008 6:03 PM

you can create this text ZGA_DUN_HDR in SO10 tcode and try ...

Error in parameter transfer

hi,everyone!
My SRM SUS version is 7.01,when I create a invioce,there is a error:Error in parameter transfer,I find that the tax is not visible.
please help,thank you!

Hi Luke,
You have to maintain some attributes in SRM-SUS Org Structure
(Attributes like ACS, BUK, SYS, VENDOR_ACS, VENDOR_SYS ),
Please Refer this Link.
SRM40-SUS: Invoice &gt; &quot;Error in parameter transfer&quot;
You may have found solution for this problem now, Still this comment will help people who are facing this problem now.
Thanks,
Arul

When sharing iMovie11 project with iDVD inmediately message 'the project could not be prepared for publishing because an error occurred (Error in user parameter list). Finalize issue?

When sharing my 60 minutes iMovie project with iDVD inmediately message 'The project could not be prepared for publishing because an error occurred (Error in user parameter list)' appears. Could not find the user parameter list, so I've no more info about this error.
Option File - Finalize Project gives inmediately the same errormessage.
Also option Share - Media Browser - Large/Medium/Mobile give the same errormessage.
Please advise, thank you!

Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
Please advise, alko80

Error message "No internal transfer number found"

Hi everyone,
I'm trying to setup the self-billing- (ERS)-functionality for scheduling agreements. The problem I'm currently facing is that I created a test-iDoc which while being processed causes an error.
The test-iDoc is sent out with the basic type GSVERF03 (I just tried the same using type GSVERF01). On my customer's side the reception is configured to use the message type SBWAP.
I also did the customizing-settings from within the ERS-monitor for the partner function (TCodes OVD5 & OVD7.... with reference number "E" & Delivery Note Number to Determine Sales Document), but in the end I still receive the error-message:"No internal transfer number found" even though it's available in the iDoc.
Does anybody have any ideas on this?!?
Any help greatly appreciated!
Thx & regards,
Bobby

Hi Boban,
I had same issue I solved creating number range in SNRO for object TRMNO_INT,
Regards

Error -: AIP-16012: Parameter: trading Partner is unique for object Trading

Hi Gurus,
When I go to rename the b2b server under trading partners, I receive the following error:
An error occurred when updating the trading partner.
1. Error -: AIP-16012: Parameter: trading Partner is unique for object Trading Partner Identification
2. TradingPartner.TradingPartner - Error -: AIP-11052: Writing following objects: Trading Partner Identification failed due to following constraint violation: TRADINGPARTNERIDENTIFICATION_UK. UNIQUE CONSTRAINT VIOLATION
3. PartyIdentificationType.TradingPartnerIdentificationType - Error -: AIP-11052: Writing following objects: Trading Partner Identification failed due to following constraint violation: TRADINGPARTNERIDENTIFICATION_UK. UNIQUE CONSTRAINT VIOLATION
4. Value - Error -: AIP-11052: Writing following objects: Trading Partner Identification failed due to following constraint violation: TRADINGPARTNERIDENTIFICATION_UK. UNIQUE CONSTRAINT VIOL
This occurs after I purge the b2b and even manually delete the trading partner that has the name that I require to change the server to (required for quality assurance testing). When I check the identifiers, there are two name ones (one of them is the one I am trying to change to) but I cannot delete any of them as it is grayed out.
Any thoughts?
Thanks
Gerald
Edited by: Gerald M. on Nov 30, 2009 8:50 AM -addtional info

Solved the issue, I manually delete entries in b2b.tip_tradingpartneriden_aud and b2b.tip_tradingpartneridentifica_t.
Is this safe to be doing this?
Thanks
Gerald

Im trying to share a project to idvd and gettingThe project could not be prepared for publishing because an error occurred. (Error in user parameter list) what does this mean

I've been trying to burn my projects in imovie to dvd's and i keep getting the forllowing error message "UNABLE TO PRPARE PROJECT FOR PUBLISHING"
"The Project could not be prepared for publishing because an error occured (Error in user parameter list)
Does anyone know why this is happening and what I can do to fix it?
Thanks!!

Can you give more details? What exactly is the entire error message text? there should be an error number too. Are you trying to finalize this to an external disk?

I keep getting this message from Imovie: Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)

I keep getting this message from Imovie:
Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)

Bartirn,
I called Apple under my Mac support contract. They were completely unfamiliar with the error you and I were encountering. Updating to 10.8.5 didn't help.
I'm stopping my TimeCapsule while I perform these tasks, but I don't know yet if I have a consistent work-around.
B

HT2479 Ok so imovie 11 won't let me export my movie anywhere, no matter what it seems. all it says is he project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list).

Any help would help.

Hi
Error -50 paramErr - Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ?
Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
Corrupted preference file: The "com.apple.iMovie.plist" file - trash it
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
from: jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
from Karsten S
Shorter clips than 1,5 sec might be one of the culptrits
Bengt cont.
Set-Up might differ
• Mac OS - most probably X.7 or more
• iMovie version - more than iM'11 v. 9.0.4
Action taken
• Finalizing project - I never do as I never understood the gain to do so
• Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
fps - set
• I only use PAL (25fps
Yours Bengt W

What is (ParamErr: error in user parameter list)

I get the following error message when I try to send my imovie '11 project to iDvd:
Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)
Anybody know why?

There may be more than one cause for this error, but in most cases the project to be published includes short clips of less than about 1.5 seconds duration.
Duplicate the project. From the duplicate, delete the short clips and try to publish. If that doesn't solve the problem, see the post by Didorx in this thread.

What does "error in user parameter list" mean? how do i fix it?

Can't burn my movies to iDVD because this message keeps showing up "Unable to prepare project for publishing". The project could not be prepared for publishing because an error occurred. Error in user parameter list. Please tell me how to fix this.

The first thing I test to do when iMovie doesn't behave as it should is to trash the preference file.
It's a very common way to try to solve problems with Applications that has problems.
Reg iMovie that file is named as one or more of these
com.apple.iMovie.plist
com.apple.iMovie3.plist
com.apple.iMovie7.plist
com.apple.iMovie8.plist
com.apple.iMovie9.plist
com.apple.iMovieApp.plist
Not always all of them are present - but many can be
I also trash
com.apple.iApps.plist
and clean out the Cache folder
All of them are in a folder named Library - BUT as there are more than one - most people chose the wrong one.
The obvious one is Library on Root level - first window that opens when You open Your Start-Up Hard Disk.
AND - that is the wrong one
The one to find is the one in Your User Account folder - and in Mac OS X.7 and so on - it is HIDDEN.
Easiest way to find the correct one is to go up to the top row Menu (Apple symbol to the top Left hand corner of screen) and here go to the right to GO and keep Option-key DOWN and it will Show You the correct Library.
Now - here find the folder Preferences to move out the com.apple.xxxxxx files to the desktop WHEN APPLICATION IS NOT RUNNING ! IMPORTANT !
then find the folder named Caches - here too - try to identify the cache files that are connected to the application - and move them too to desktop.
Now try to run Your application e.g. iMovie
There is an easier way to test if this is the real problem by
• Goto Apple menu and down to System preferences
• Select Accounts
• Click on the Plus sign and create a new user e.g. test1
• Apple menu - and down to Log out
• Now log into the new user test1
• Now see if application runs as intended
If so - then the problem to 99% is in the Pref or Cache files.
Yours Bengt W

ParamErr: error in user parameter list

I am trying to finalize an iMovie11 project, and I get this error message: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list).
I rebooted and relaunched iMovie to no effect. What does this mean?
L

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

IMovie error in user parameter list" mean? how do i fix it

I have created a video on iMovie. Now, I would like to export the movie to my external hard drive, however, I am encountering this error message...
……."Unable to prepare project for publishing". The project could not be prepared for publishing because an error occurred. Error in user parameter list"
Suggestions?

Im not sure what you mean when you say home folder?
I was able to upload the video to Youtube, however I would also like to have a copy of the video on my external hard drive...

Cannot publish iMovie project paramerr: error in user parameter list

When trying to publish imovie project, getting message:
Unable to prepare project for publishing.
The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)
Can anyone help explain what to do? My first project.
Thanks!
Rick

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

Unable to prepare project for publishing. Error in user parameter list

After editing the project in iMovie '09 I am getting strange problems.
1) If I try to share the project to iDVD I get the Error Message: "Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)". The same error message I get when trying to "Export Movie".
2) If I play the movie (either in the preview window or in full screen), I hear the audio, but the video remains on the picture, I was, when I start playing. This wasn't the case until yesterday. I don't know, what has changed this.
I am not sure, if both problems are connected.
If I try to play a clip, everything still works well, means audio and video are playing as expected.
Any ideas, what I could try to solve this (I already tried to restart iMovie, checked that I have the newest version 8.0.1 (740) and tried to restart my iMac?
Leela

I'm having the same problem, though it wasn't triggered by me importing anything. I had an almost complete project that I was just editing down and tightening up. I was making some deletions and moving some clips around when the project just went all wonky. If I hit the space bar the video will play. Audio, video and titles are all as they should be. But the editing window is frozen. The raw clips have disappeared from the upper left. When I restart the app the editing window is sometimes blank. But if I drag another application across the screen (like Mail or iTunes) the clips regenerate in the viewer window. This is a HUGE disappointment for me. After wasting an hour trying to solve this I now have to start completely from scratch with this project.

Errors:Error in parameter transfer

Similar Messages

Maybe you are looking for